motor action accessed in an unknown part of my code

Similar Questions

• First run the part of the code

  Hi people,

  I'm using Labview to control a camera and a motor, who need a boot before I can use them.  Currently I have the status of fact manually, but there is a lot of time and unproductive.  I wish this part of my code to run first and before any other code in my VI.  I am a little naïve in the way that this is possible and my gutfeeling is it is should not be difficult.

  I tried to use boolean to start my loop once the code is executed, but it is not effective when I have more of a lead-in to run.  LabVIEW run them in parallel...

  If anyone can help?

  Thanks in advance.

  All you have to do is create a dependency on the data. Everything is in the stream!

  Can you give a little more detail on what your initialization code needs to do? Most likely, it generates an error at the end, so if if wire you this error at the edge of the main code loop, until the initialization is complete.

  A better solution would be to create a correct state machine, which is one of the States initialization code. The trigger as the first State. This method has the advantage that you can reset again at a later date if necessary, without the need for a restart of the program.

  Never trap code in a structure of sequence as shown above, it is very rigid. For example, it is not possible to pass from one State or change the running order.

• Is it possible to refer, or return to a part of a code

  Hey all,.

  Is there a way to goto or consult an earlier part of a code of another party. What I have is a window showing the Viewer 2 buttons, I would like to return to this screen, once they click on one of the two buttons. I've included the part of the code below, so if they, then click on the 'text' button, they read, that it is a program, then click Ok, it should go back to the first dialog box display. Any ideas?

  display dialog ¬

  Buttons 'Sample Text' {"text"2}

  If the result back button is "what is it" then

  display dialog ¬

  "This is a program" buttons {"Ok"}

  on the other

  display dialog ¬

  "Text text text.

  Thank you, AppleTardis

  Don't know if that's what you're looking for, but he will then leave your script at first, until you click "Cancel".

  SG

  ¬ Display dialog box

  Buttons 'Sample Text' {"Text1", "text 2"}

  If the result is 'Text1' and then back button

  ¬ Display dialog box

  "This is a program" buttons {"Ok", "Cancel"}

  on the other

  ¬ Display dialog box

  'Text text text' buttons {"Ok", "Cancel"}

  end if

  run me

• Is it possible to find what part of my code sends the e-mail.

  I have a problem as follows: an e-mail is sent as a daily alert to the list of recipients. The sender is our group of e-mail to the development team. One of the recipients email is no longer valid. Therefore, every day, we receive e-mail back "ofyour message has not reached some or all recipients planned." because of the invalid recipient. Nobody knows where is the list of recipients to delete this incorrect e-mail address. The code was written years ago by a developer. But we need to delete this incorrect e-mail address to no longer receive this daily email by anyone.

  I tried to get across the code base, but the code is massif, scattered on several servers and several patterns.

  Is my question, there a way to detect this email (which part of the code, package, function, or procedure)?

  Hawk333 wrote:

  I have a problem as follows: an e-mail is sent as a daily alert to the list of recipients. The sender is our group of e-mail to the development team. One of the recipients email is no longer valid. Therefore, every day, we receive e-mail back "your message has not reached some or all recipients planned." because of the invalid recipient. Nobody knows where is the list of recipients to delete this incorrect e-mail address. The code was written years ago by a developer. But we need to delete this incorrect e-mail address to no longer receive this daily email by anyone.

  I tried to get across the code base, but the code is massif, scattered on several servers and several patterns.

  Is my question, there a way to detect this email (which part of the code, package, function, or procedure)?

  sending e-mail code cannot reside in the DB or a part of the core application code.

  As far as I KNOW, the best place to start the detective is associated when the email is sent and correlating what code is / was running at this time.

  CHECK RUN UTL_MAIL;

  RUN UTL_SMTP;

• How does an event undesirable (motor Action) end

  All,

  I looked at an example AE for the forum. It does not work.

  My question is what prevents the AE when it is hardcoded with a Boolean value (True)?

  Thank you

  Ben wrote:

  I read that as 'don't browse once only' giving me the chances of the philosophical question;

  If it covers several times can he still called an AE?

  I love "THINGIES" in my application that can browse more than once. An example is a "security Thingie" that will make the security controls to allow the selected operation to proceed. I've implemented within a framework of pseudo-AE to force the other thread to wait while the audit is completed.

  Someone at - it care to comment on this idea?

  Ben

  Perform more advanced functions could fall into the 'Action' category, but then it is different from a regular sub - vi?

  1. given that EI is a FG on steroids that we must infer that some memory based on shift registers is involved

  2 "party action" means that we can have several functions (generally less Init, Get, Set). Nothing limits really these individual action to use loops and sub - vi, e.g. a 'median Get '.

  3. However, if these actions of the chain we suddenly have a state machine!

  Thus, an adverse event must be a running state machine unique storage memory function.

  /Y

• Motor action cluster loses data

  I have a strange problem that I work on.  When my AE executes a certain method, the data that I am trying to regroup in the cluster are lost.  I use this model of design for all my drawings of AE but have never seen this problem before.

  When the waveform is converted to an array of DBL, the cluster will not refresh with data.  No idea why?

  
  

• No access to the DVD drive - 38 error code

  Update Driver published 07/07/08 to 23:59 has been installed on my system as made by Toshiba Tempo but rebooting my machine, I get error 38 (according to Vista) that prevents the new driver installation as the old pilot is resident in memory... ?? Effectively, this means that I can't access or see my DVD player more in other ways than in the page Manager devices Control Panel. Option driver restore is not available, perhaps because it was an update of the firmware. The message on the device properties page is as follows:

  Windows cannot load the driver for this hardware device because a previous instance of the device driver is still in memory. (Code 38)

  The installed updatre was frmwre-20080707134447. It includes an Adobe document that tells you what to do and how to ensure that your drive needs to be refreshed, which was easy to follow and loose my machine.

  I tried to uninstall the device and the driver, but whenever I have to reload the same error occurs.

  I'm really impressed and quite embarrassed, because it is a recommended Toshiba firmware update done using their system of Tempo, ideas or advice welcome.

  Thank you

  Matt

  Hello

  Do you see a CD/DVD drive in Device Manager?
  If so, then remove it from the list of devices.

  Then access the registry and delete the Upperfilters and Lowerfilters completely from the following registry key values:
  HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Contro l\Class\ {4D36E965-E325-11CE-BFC1-08002BE10318}

  Finally restart the laptop and check if the CD/DVD drive would still be functions

  Further details can be found here:
  http://support.Microsoft.com/kb/270008/en-us

• Satellite P300-1BB: Windows 7 - unknown device Acpi Microsoft code 28

  Hello

  I try Windows 7 Ultimate on my P300-1bb, but I have an unknown driver, it is write: Acpi Microsoft (code 28).
  I have install all drivers and bios update, but nothing that recognizes this pilot.

  Where can I find this driver?

  Thank you

  Hello

  Install the Intel chipset driver.
  If you won't find on the Toshiba driver page, I recommend you research on the Intel page directly.

  As I m not wrong it s a * Mobile Intel PM45 Express Chipset *.

  Ciao

• Pavilion G6-2210sa: unknown device problem - HPQ0004 (Code 28)

  I have a unknown device in my device on the PCI Express Root Complex Manager: ACPI\VEN_HPQ & DEV_0004 ACPI\HPQ0004 into the conduct of a preliminary search, it seems to be for HP 3D drive guard? But as my laptop is not supported no matter what more I can't find the right file. Can someone point me in the right direction? Thank you

  Hello:

  You need this version of the driver for the ID of HPQ0004.

  FTP://ftp.HP.com/pub/SoftPaq/sp64001-64500/sp64144.exe

  One whereby Hüffer post is for the ID of HPQ6007.

• Please HELP Access Connections: No Wireless Network found-> error code 117

  Hello

  Lenovo 3000 N1000 with 1 GB Ram, Win XP SP2, bought in May 2006. WIFI network with WPA - PSK key worked without any problems so far and is still accessible with the PC.

  After the transfer of music through my mobile to my mobile Bluetooth maps network seems to be disconnected. Dial-up connections (AC) or Windows can find any wireless network. Also if I try to configure any LAN, WLAN with Windows I get the message that all network cards have been removed. However I can't find any problem in Device Manager as all parts are shown to work OK.

  That's what I've done so far:

  (1) radio checked turn on--->

  (2) FN + F5--> connection on

  (3) AC uninstalled, downloaded and installed the version more current (5.00 Build 7VCX32WW)

  (4) installed new version wireless driver for Intel (r) PRO/Wireless 3945ABG (version 12.0.0.82)

  Yet, even if I uninstall AC to check that if the WIFI doesn't work at all, Windows gives the message that all network components have been removed.

  Diagnose gives tool the following output:

  'Stack initialization failed wireless error code 117'

  Log file:

  Description: Intel(r) PRO/Wireless 3945ABG Network Connection
  Type: Wireless LAN adapter
  DriverVersion: 10. 5 1. 59---> why is the older version of driver?
  

  PNPID: PCI VEN_8086 & DEV_4227 & SUBSYS_10118086
  SupplicantVersion: AEGIS Protocol (IEEE 802. 1 x) v3.5.3.0

  ERROR AcSvc (SYSTEM (Prvlg).1108.4580) [3/9] 11:04:15:703 CAcGolan::GetRadioStateInDriver: Golan API GetRadioState() missing!

  Hope this is enough information for all of you to suggest a solution. That I have seen previous discussions, some of you have had similar problems in the past and could fix it somehow. However, I couldn't find someone with exactly the same problem.

  Thanks a lot in advance for any advice you may have.

  Flo

  Flo, welcome to the forum,

  missing icons in the Windows network connections? Thisthread may have some useful information.

• Insufficient privileges. "Access home page. Error details Error Codes: C64RS3Z2

  Hello Expert;

  I am trying to deploy a catalogue (created in OBIEE 11.1.1.6.0) on my instance (OBIEE 11.1.1.7.0), when I try to load the analytical page I get the following error

  "No sufficient privileges." Access home page. "Details of the error, the Error Codes: C64RS3Z2"

  I try to check for roles as described in another thread and confirmed that the user weblogic has the catalog has the BIAdministrators role, consumer of BI, BI author role authenticated role.

  Please notify.

  Thank you

  Bahija

  Hello

  I have this problem happens because of the lower version of the catalog. To my catalog u just open the catalog on OBIEE 11.1.1.7 Offin mode. It will automatically upgrate catalog version obiee 11.1.1.7 then migrate this catalog using EM.

  If you have a problem with

  State: HY000. Code: 10058. [NQODBC] [SQL_STATE: HY000] [nQSError: 10058] A general error occurred. [nQSError: 43113] The message returned by OBIS. [nQSError: 27005] Unresolved column: "Transactions". "' Transaction ID to Arrangement. (HY000)

  Then, you will need to check the RPD. Open the RPD in online mode & check if ".» Column Arrangement transaction ID"is present in the table of"Transactions"or not.

  Here the names of columns & table name should be same (case sensative) as: "Transactions". "' Transaction ID to Arrangement.

• Update of the part of XML code stored as a CLOB

  Hello
  
  I have an xml object that is stored in a CLOB filed to a table. I want to update a part of this xml file. I thought 'udpateXML' is the best to use for this purpose. But, when I use "updateXML", the XML formatting is not retained. I receive the complete xml code in a single line. This is not acceptable.
  
  Please let me know if there are other ways to achieve this.
  
  Here is an example of what I'm trying to do and the result:
  
  with t as
  (select "< main >)
  < sub-tag >
  Text < child > < / child >
  < / subtag >
  (< / hand > ' double sample_xml)
  
  Select sample_xml,
  (updatexml (xmltype (sample_xml),'/ / child/text main/subtag () ',' updated_xml text')) .getClobVal (new)
  t;
  
  
  Here is the output.
  
  SAMPLE_XML UPDATED_XML
  ------
  new < principal > < principal > text < sub > < child > < / child > < / sub > < / hand >
  < sub-tag >
  Text < child > < / child >
  < / subtag >
  < / hand >
  
  I use Oralce11g database and SQLNavigator Editor.
  
  Thank you
  Anuradha

  First of all, why the new format is unacceptable? Show me an Analyzer who cares and I'll show you an updated parser incorrectly implemented.

  For formatting XML for human readability purposes, then XMLSerialize... as dash CLOB size... as shown in {message identifier: = 3788239}

• I'm trying to access all sites gives the warning (error code: sec_error_unknown_issuer)

  This affects my computer only profile (windows 8) and only on Firefox. I disabled SSL on AVG as help pages suggest and tried to reinstall, both without effect. Someone knows how to fix this?

  Check the date and time and time zone in clock of your computer: (double) click on the clock icon in the Windows taskbar.

  Find out why the site is not approved, then click on "Technical Details" to expand this section.
  If the certificate is not reliable because no issuer channel was provided (sec_error_unknown_issuer) and then see if you can install the intermediate certificate from another source.

  You can retrieve the certificate and check details such as WHO issued the certificates and the expiration dates of certificates.

  • Click on the link at the bottom of the error page: "I understand the risks".

  Let Firefox recover the certificate: "Add Exception"-> "get certificate".

  • Click on the "view..." button. "and inspect the certificate and the Coachman, who is the issuer of the certificate.

  You can see more details like the intermediate certificates that are used in the details pane.

  If "I understand the risks" is missing, then this page can be opened in a (i) frame and in this case, try the shortcut menu and use "Frame this: Open image in New Tab".

  • Note that some firewall monitors connections (sure) and that programs like Sendori or FiddlerRoot can intercept connections and send their own certificate instead of the certificate of the Web site.
  • Note that it is not recommended to add a permanent exception in such a case, so only use it to inspect the certificate.

• delay time in a part of the code.

  Hello

  I am developing an application using Labview version 9. the application is to acquire a shock wave Flash of a scope of 2012B of tektronix on a PC and generate a report with parameters waveform as the rise time, queue time and the crest of the wave.

  I was able to acquire the wave and generate with all the settings.

  However when I built an exe program and ran it on a laptop it has a time limit for the generation of reports (about 3-4 minutes) bring up the menu for the generation of reports. And also I find not very friendly code. Please guide me so that I can optimize the code for a faster exit.

  Suggestions and information to improve my code would be useful.

  Thanks in advance...

  Use the computer of State Architecture.

  Avoid using multiple loops when it is unnecessary

  You can exit the loop using the structure of the event in the state machine rather than handling separate loop to kill Apllication labVIEW which is not advised.

  You do not require a separate loop updated indicator of Globals.

  http://search.NI.com/nisearch/app/main/p/bot/no/AP/tech/lang/en/PG/1/SN/catnav:Tu/q/State%20machine/

• Windows Defender does not turn and I can't access it. I get the error Code is 0x800106ba. What does this error code mean?

  I can't turn on Windows Defender, nor can I open it upwards. The error code that is displayed is 0x8800106ba. What does this code mean?

  Hi, tonytiger34.

  The usual solution to this error is to make sure that the service is automatic. Oferror message when you run Windows Defender: 'Error 0x800106ba Code' :

  "To resolve this issue, follow these steps:

  1. Set the Windows Defender service on Automatic rather than Manual or disabled . To do this, follow these steps:
     1. Click Start
        The collapse of this image enlarge this image

        

        type services in the Start Search box, and then clickServices in the programs list.

        The collapse of this image enlarge this image

        

        If you are prompted for an administrator password or for confirmation, type your password or clickcontinue .

     2. Double-click the Windows Defender service and then in the Startup type box, clickAutomatic .
     3. Click OK . »

  If the automatic commissioning does not resolve the problem, try reinstalling Windows Defender.  Note, however, if you have installed Microsoft Security Essentials, Windows Defender disabled installation because MSE includes anti-spyware protection.

  Additional steps are available in the article referenced in the Knowledge Base.  Please let us know how make you out.

  Corrine, Microsoft MVP (consumer security)
  My Blog: Security garden

  This announcement is in my opinion and does not necessarily reflect the opinion or the opinion of Microsoft, its employees or other MVPS and is provided without warranty and not an entitlement.