motorcycle, technical space saving more easy
Good news guys! I discovered that when I went to the storage in the framework section, the Misc. They took about 500 MB of available space. I deleted them and there is no harm in my camera n gave me a lot of space. Here how to do it: -.
go to settings > storage > misc.
Select all the files, and then press the delete icon!
No harm to remove .temp
OK, I tried all the objections from you guys is so the conclusion: you have WhatsApp do not delete files of WhatsApp. If you play Minecraft don't delete the file of games. But the .tmp which takes about 300 MB can be removed without harm... Thank you guys for having this in my opinion
Tags: Motorola Phones
Similar Questions
-
Does anyone know how I could free more space/add more space to my backup drive?
Original title: save file/disk
Dear all,
As usual, I used part of my hard drive to back up files, etc.
In my last scheduled backup, windows informed me that he could not perform the cause there wasn't enough space in my backup disk.
Does anyone know how I could free more space/add more space to my backup drive?
Thanks in advance
George
On Tuesday, October 5, 2010 06:46:38 + 0000, GeorgeMachairas wrote:
As usual, I used part of my hard drive to back up files, etc.
In my last scheduled backup, windows informed me that he could not perform the cause there wasn't enough space in my backup disk.
Does anyone know how I could free more space/add more space to my backup drive?
Please be aware that the second part of your hard drive backup is
far the lowest form of backup exists. It is only very
slightly better than no backup at all, because it let you
sensitive to the simultaneous loss of the original and the backup on many of
the most common dangers: drive failure, head goes down, severe feeding
glitches, near lightning, virus attacks, same flight of the
computer.In my view, secure backup must be on a unguarded and removable media
in the computer. For backup really secure (required, for example, if the)
the life of your company depends on your data), you should have several
generations of backup and at least one of these generations must be
stored off-site.You can read this article on the backup that I wrote: 'save '.
"Your computer regularly and reliably" to
http://www.computorcompanion.com/LPMArticle.asp?ID=314Ken Blake (MS-MVP)
-
Is there a more easy/more simple way to achieve this?
Good morning (afternoon to you, BluShadow).
I got following exact, as you wish, output (derived from the EMP table):
by using the following query:D10 D20 D30 PREZ MGRS ANALS SALESM CLERKS ------- ------- ------- ------- ------- ------- ------- ------- CLARK JONES WARD KING BLAKE FORD ALLEN ADAMS KING FORD TURNER CLARK SCOTT MARTIN JAMES MILLER ADAMS ALLEN JONES TURNER MILLER SMITH JAMES WARD SMITH SCOTT BLAKE MARTIN
that takes a total of 5 selects to get there.with -- -- pivoted departments (haven't studied the Oracle PIVOT clause yet) -- depts as ( select max(case deptno when 10 then ename end) as d10, max(case deptno when 20 then ename end) as d20, max(case deptno when 30 then ename end) as d30, rnd from ( select deptno, ename, row_number() over (partition by deptno order by deptno) rnd from emp ) group by rnd order by rnd ), -- -- pivoted jobs -- jobs as ( select max(case job when 'CLERK' then ename end) as Clerks, max(case job when 'PRESIDENT' then ename end) as Prez, max(case job when 'MANAGER' then ename end) as Mgrs, max(case job when 'ANALYST' then ename end) as Anals, max(case job when 'SALESMAN' then ename end) as SalesM, rnj from ( select job, ename, row_number() over (partition by job order by ename) as rnj from emp ) group by rnj order by rnj ) select d10, d20, d30, Prez, Mgrs, Anals, SalesM, Clerks from depts a full outer join jobs b on a.rnd = b.rnj order by rnj, rnd;
I tried to find a query that would be, I hope more simple, easier and does not require as much selects. My last attempt is the following (which is closer to the desired result, but does not get a cigar yet):
The query above annoys me to this result which is encouraging, but... the brand:select case deptno when 10 then ename end as d10, case deptno when 20 then ename end as d20, case deptno when 30 then ename end as d30, case job when 'CLERK' then ename end as Clerks, case job when 'PRESIDENT' then ename end as Prez, case job when 'MANAGER' then ename end as Mgrs, case job when 'ANALYST' then ename end as Anals, case job when 'SALESMAN' then ename end as SalesM, row_number() over (partition by deptno order by deptno) as rnd, row_number() over (partition by job order by ename) as rnj from emp order by rnj;
It uses a single SELECT statement and contains all the data that should be displayed, but I can't find a way to eliminate NULL values without losing a few jobs or departmentsD10 D20 D30 CLERKS PREZ MGRS ANALS SALESM RND RNJ ------- ------- ------- ------- ------- ------- ------- ------- ---- ---- ALLEN ALLEN 3 1 ADAMS ADAMS 2 1 BLAKE BLAKE 6 1 KING KING 2 1 FORD FORD 1 1 SCOTT SCOTT 5 2 JAMES JAMES 5 2 CLARK CLARK 3 2 MARTIN MARTIN 2 2 TURNER TURNER 1 3 MILLER MILLER 1 3 D10 D20 D30 CLERKS PREZ MGRS ANALS SALESM RND RNJ ------- ------- ------- ------- ------- ------- ------- ------- ---- ---- JONES JONES 3 3 WARD WARD 4 4 SMITH SMITH 4 4
Your help is welcome and appreciated,
John.
PS: I'll be perfectly happy to learn that there is no way more easy/simple. In other words, if the answer is simply "No, there no simpler or easier way", please let me know which is the case. (I ask that you be sure enough of that though, thank you)
Published by: 440bx - 11 GR 2 on July 25, 2010 07:19 - added PS.According to the hoek' suggestion ;-)
SQL> select d10, d20, d30, prez, mgrs, anals, salesm, clerks 2 from (select row_number() over(partition by deptno order by ename) rn, 3 ename, 4 to_char(deptno) deptno 5 from emp 6 union all 7 select row_number() over(partition by job order by ename), 8 ename, 9 job 10 from emp) pivot(max(ename) for deptno in(10 d10, 11 20 d20, 12 30 d30, 13 'ANALYST' anals, 14 'CLERK' clerks, 15 'MANAGER' mgrs, 16 'PRESIDENT' prez, 17 'SALESMAN' salesm)) 18 order by rn 19 / D10 D20 D30 PREZ MGRS ANALS SALESM CLERKS ---------- ---------- ---------- ---------- ---------- ---------- ---------- ---------- CLARK ADAMS ALLEN KING BLAKE FORD ALLEN ADAMS KING FORD BLAKE CLARK SCOTT MARTIN JAMES MILLER JONES JAMES JONES TURNER MILLER SCOTT MARTIN WARD SMITH SMITH TURNER WARD 6 rows selected.
Best regards
Maxim
-
Sansa deletet all and no space available more
Hello
a couple of weeks, it happened the first time I took my Sansaclip and all data has been deletet? I just copied the stuff I wanted to listen again on her, but has noticed that there is less space available.
Today I listened to an interview on my clip, you press pause for a moment and I wanted to keep the look I got the message that the Musikfile cannot be read and that I need to free up space. Very strange! So I connected to my PC, all files (Podcast, audio books) when empty yet? !!! As I tried to copy the files to the clip agaiain I had the instant message available space / carrier is full.
so is there something I can do? It's only 9 months since I bought it on Amazon therre is still guaranteed on this subject otherwise, I hope!
Thanks for any help in adevance
ASA
Thanks guys... I tried the reset, but can not access the video more. I just wanted to get the new firmware but got the response from Amazon that I can send the item and they will repair or Exchange it.
-
Disk space decreases more than 60 GB when I open a 50 MB file.
Hi guys,.
Having trouble with a PS file. It takes a few minutes to open and perform all the tasks that require a lot of memory takes forever, or throws an error 'drive to work '. When he opened it takes more than 60 GB of hard drive space. It can basically not be worked on.
There is nothing particularly remarkable about the file, as mentioned that the size of the file is 50 MB - this is a basic design of Web page which consists mainly of the text and buttons, with only a few (rasterized at 72 dpi) images. There are a lot of layers, which is the only thing I can think of that might cause the file to be slow and unresponsive.
If anyone has experienced anything similar and has ideas on how to solve this problem, I would be very happy suddenly hand.
Thank you
Jack
Thanks Trevor,
I ended up duplicating all the layers in the problematic file into a new file, which does not help much, but a clean reinstall of the PS seems to have done the trick.
-
No error of space used more, but only 50 GB 229
I'm new on vSphere and work with a system I did not build. I get a message of lack of space"and one of my vm powers down. I revive by removing the old clichés, etc.. The virtual machine uses only 52 GB GB 229 allocated. I realize that maybe there is a large swap file or something stopping the virtual machine to use this space. How can I analyze it and eventually develop the region that this virtual machine must work with the 229 GB envelope?
Thank you.
Looks like I'm more in older or MISTLETOE is lying. In the data browser GUI store the base vmdk is 20 GB and with ls - lias, it is the totality of the 100 GB.
What I would say to do, is to stop the virtual machine and delete/consolidate 1 by 1 in the instant snapshot Manager. Before each deletion control the free disk space (although you shouldn't have the additional disk space). Always remove the nearest snapshot for the basic disk, which means the first snapshot you would be to remove the 'AAA_Shipment', second ' AAA-03-06-10 ", third"AAAServer"before"AAAServer2008_3_21_11".»
Sizes:
AAA_Shipment--> 5,402,470,400 - AAAServer2008-000005 - delta.vmdk
AAA-03-06 - 10--> 8,724,359,168 - AAAServer2008-000006 - delta.vmdk
AAAServer--> 12,985,772,032 - AAAServer2008-000007 - delta.vmdk
AAAServer2008_3_21_11--> 5,972,895,744 - AAAServer2008-000001 - delta.vmdk
After each deletion, wait that the instant vmdk file does not appear in the data brower store more.
André
-
DB used space much more that I loaded into the DB
Hello
I use OBI and the default database that is created by the Setup program. Through the Warehouse Builder I loaded a total of 100 MB of data in the database, but
the space used in the USERS tablespace shows more than 800 MB. The SYSTEM tablespace is not small either.
Why are my big storage space? I use of total space to 2 GB? -C' is 20 times the size of the actual data that I loaded.
[Print the screen size and storage spaces | http://www.metallon.org/test/space.png]
I would be grateful for any ideas.If you insert into a table and then delete, remains the high-water mark.
If a table is empty, you can truncate to reclaim space. If it is not empty you can reduce it.
Alternatively, you can rebuild the big index to recover the space.
-
Increase the space for more hot graphics card
I asked a few questions about this... but I was not specific enough. My computer: HP Pavilion Elite m9060n; ZOTAC GeForce GTS250 1 GB graphics card. I made the space for this double-card slot; and upgraded POWER of Antec 650W PSU. When mounted, the graphics card is quite close to the above TV tuner card... I can move the tuner card to a location that puts it above the PSU, but allows generous space above the graphics card. The Tuner card generates a lot of heat? It would be a wise move? I asked a similar? but referred to as a 'video card' tuner card... a different animal... excuse my bad, my intel severely limited.
Hello
I have the drive Bay multimedia Pocket, Personal Media Bay, two hard drives, power SUPPLY Corsair HX 650 block (extra long cables), Media Player and the NVIDIA GTX 460. Everything fits. The cables are a little squished but otherwise it's okay.
My firm works on the edges of the top and the PSU's fan mounted to the top, as was the original power supply. Otherwise, my firm is the same size as yours.
-
I saved more than a second lead by accident would like to recover the second file
Somehow, I saved a file on an existing file and would love to get the file that I messed up
Hello
It depends on your version of vista
http://Windows.Microsoft.com/en-us/Windows-Vista/demo-restore-an-old-version-of-a-file
-
As the title says, I'm trying to get this version to work. It was installed but keeps giving me error messages. What Miss me? I have Vista and updated as updates go. I also had to reinstall WinHlp32.exe to access to aid for the program, but it still does not work. Topices (creater of IIFD) has no technical support for me.
Thank you.
As the title says, I'm trying to get this version to work. It was installed but keeps giving me error messages. What Miss me? I have Vista and updated as updates go. I also had to reinstall WinHlp32.exe to access to aid for the program, but it still does not work. Topices (creater of IIFD) has no technical support for me.
Thank you.
Hey Nicsinger
see the list in the center of vista compatibility for your program problem on the link below
If you have any success with it don't try using vista for this compatibility mode by using the information in the belowlink
http://www.howtogeek.com/HOWTO/Windows-Vista/using-Windows-Vista-compatibility-mode/
To configure the compatibility mode for an application, simply locate the installation directory and right click on the .exe, selecting Properties from the menu.
Select the Compatibility tab:
You can choose to run the program in Windows XP compatibility mode, or even all the way back to Windows 95 compatibility.
Walter, the time zone traveller
-
wanted to know... If it is easier to develop and... apps look better when I develop Java application using J2ME and deploy it on Blackberry... or the way eclipse-JDE...
My java application includes the web service call
Thank you
If you are developing from scratch, my personal suggestion is to go with the BlackBerry API, it gives native aspect and there are good developer docs and tutorials how-to, video... APRT of this wonderful form.
-
CC storage space - get more than 20 GB
Hi comrades ACC-lers.
This may seem like a stupid question, but I could not find a setting/request for purchase of additional storage for my CC account. We all get 20 GB, but not to apply for further plans and these are available. Thank you.
Kind regards
Frank
I agree with Ned, Adobe sells amount X package, with no option to buy more storage
-Special photography Plan includes 2 gigabytes of storage cloud
-Plan details for individuals includes 20Gig of storage cloud
-Business plan team includes 100Gig of cloud storage
If you don't want to go to the most expensive team plan, you will need to buy the storage of another company
-read using a cloud to save images for ideas
-
ESXi v5.0 - off error space with more than 40 GB of space will inform
I'm currently under ESXi 5.0 installation in a RAID5 configuration with 146GBx3 (Total: 268,50 GB)
I added 2 virtual machines running thick
VM Machine 1 - HD1 thin provision (size 200 GB provided)
VM Machine 2 - HD1 thin provision (size 33,91 GB configured)
VM Machine 2 - HD2 thin provision (13566 configured GB size)
I left then a VM Machine 3 previous ESXi v5.0 to the ESXi v5.0 by using "VMware vCenter Converter Standalone Client v5.0.1 Build-875114" (thin provision) that everything went well and worked very well for several weeks.
But this morning I come and see all the VMS arrested due to no space left so I checked the Vsphere Client, & it said I had 268,50 GB / 40 GB free in 'Summary' - 'Storage' and also in 'Configuration' - 'Storage' section.
No idea why this happened and how to minimize what is happening again?
(I'm still testing it, but I think that the cause was that ESXi free space was not changed after the use of VMware vCenter Converter to add VM Machine 3)
Thank you
I never have any "Rescan" is not an automatic thing that must take place at least once a week or something?
They update periodically, but can sometimes become 'sticky' and not up to date. The new manual scan (or two or three) are often refreshed - I was just curious to know if you're really out of space to have 40 GB free. You can also use the Shell of ESXi to investigate.
-
ESXi 4.1.0 off error space with more than 10 GB of space will inform
I try to install the PCNs (PowerChute Newtork Shutdown) on my host machine with 11.28 GB drive hard space remaining. I am trying to copy the tar file, and when it comes to abot 37 MB, she complained not enough space. I used the df k command before and after the copy, and I see that the storage changes of 30 MB and States that it is 11 GB remaining but still crashes out. Any ideas on how to solve this problem, I have machines here but it is still possible to play with. They type of formatting is VMFS3 if that helps, any ideas would be great.
Hello and welcome to the communities.
Try to download the file with the data store Navigator in the vSphere Client to see if that circumvents you this problem.
Good luck!
-
How re-size great bar to make it more large (more easy to see)?
I've seen bad eye. Is there a way to enlarge the text or it?
You can try the add-on following- https://addons.mozilla.org/en-US/firefox/addon/theme-font-size-changer/
See also-
Maybe you are looking for
-
Questions about changing OS from Vista to XP on Satellite P100-160
Hello I wonder if someone could help me... I don't like Windows Vista with a passion and I would much change for Windows XP. My P100-160 provided with Windows Vista pre-installed, but until now I feel of it is poor to say the least! So I'd like to re
-
Two monitors for Optiplex 3020 small format
Just got my OptiPlex 3020 small form today. Noticed right away that a single output to a monitor. After the trip to Best Buy and learning that a regular video card will not fit my turn, no one knows how to reach two monitors to a small Tower? Thank y
-
Windows 7 Pro 64 Bit product key lost
I lost the packaging provided with my Windows 7 Professional disk which has the key. I used software that "Can" raise the key on the hard disk, but I succumbed. Is there anyway that I can always recover the product key because soon I need to clean my
-
A clean installed Windows 7 64 bit and tried to connect to the Deskjet printer connected to a 32-bit, Windows 7 network system home. Install from the installation DVD of Windows, but not such animal on DVD? Error HP spoke only USB connection and says
-
Program does not start. Error message "could not start because its side-by-side configuration is incorrect." How can I solve this problem?