Increase the space for more hot graphics card

I asked a few questions about this... but I was not specific enough. My computer: HP Pavilion Elite m9060n; ZOTAC GeForce GTS250 1 GB graphics card. I made the space for this double-card slot; and upgraded POWER of Antec 650W PSU.  When mounted, the graphics card is quite close to the above TV tuner card... I can move the tuner card to a location that puts it above the PSU, but allows generous space above the graphics card. The Tuner card generates a lot of heat? It would be a wise move? I asked a similar? but referred to as a 'video card' tuner card... a different animal... excuse my bad, my intel severely limited.

Hello

I have the drive Bay multimedia Pocket, Personal Media Bay, two hard drives, power SUPPLY Corsair HX 650 block (extra long cables), Media Player and the NVIDIA GTX 460.  Everything fits. The cables are a little squished but otherwise it's okay.

My firm works on the edges of the top and the PSU's fan mounted to the top, as was the original power supply.  Otherwise, my firm is the same size as yours.

Tags: HP HP Desktops

Similar Questions

  • Getting error while booting: "the Catalyst Control Center is not suppoerted by the version of the driver for your current graphics card.

    Original title: error message

    Whenever I turn on my computer (Windows Vista) I get the following error: "the Catalyst Control Center is not suppoerted by the version of the driver for your compatible graphics card. Please update your ATI graphics driver or enavle your ATI card using the display manager. "How can I do this? and do I do this?

    Hello

    Update the driver may solve the problem. See the following article to install/update the drivers.

    Update a hardware driver that is not working properly.

    http://Windows.Microsoft.com/en-us/Windows-Vista/update-a-driver-for-hardware-that-isn ' t-work correctly

    You can also download the drivers from AMD. Choose the appropriate brand and model of the device and download the drivers.

    http://support.AMD.com/us/gpudownload/pages/index.aspx

  • It is possible to combine hard disks to increase the space for the C: drive?

    My c drive is running out of space. However there enough space in the hard disk in the other readers. Is it possible to combine one or two partitions c and increase the space available in c without formatting. I'm using vista Home premium

    It is possible, if you format a partition you want to combine. If you have some data, you can move them to another place or external drive. Then I say you want to combine the D and C drive (you could do it with any other drive):

    1) go to start, then right click on computer and then click on manage

    (2) then find storage-> disk management

    (3) right click on the D drive, then click on remove

    (4) then right click on C, then click on expand

    Note that in this case, as I said information on drive D will be lost. So make sure you save them. It might be a question that if you install something on drive D, you will need to reinstall it.

    Drive D example right, you have picked any other player.

  • Update the BIOS for AMD switchable graphics card?

    Hello

    Please confirm my decision to come to update my system bios:

    It seems that this may allow it to configure switchable graphics card AMD?

    Thank you for your time

    UPDATE: I'll be following the following guide for the update of the BIOS, please confirm if this is wrong.

    http://support.HP.com/us-en/document/c00042629

    ------------------
    System Information
    ------------------
    Time of this report: 3/29/2014, 14:04:47
           Machine name: AKBAR
       Operating System: Windows 8 64-bit (6.2, Build 9200) (9200.win8_gdr.130301-1803)
               Language: English (Regional Setting: English)
    System Manufacturer: Hewlett-Packard
           System Model: HP ENVY m6 Sleekbook
                   BIOS: F.02
              Processor: AMD A10-5745M APU with Radeon(tm) HD Graphics   (4 CPUs), ~2.1GHz
                 Memory: 6144MB RAM
    Available OS Memory: 5338MB RAM
              Page File: 1873MB used, 5964MB available
            Windows Dir: C:\Windows
        DirectX Version: DirectX 11
    DX Setup Parameters: Not found
       User DPI Setting: Using System DPI
     System DPI Setting: 96 DPI (100 percent)
        DWM DPI Scaling: Disabled
         DxDiag Version: 6.02.9200.16384 64bit Unicode
    
    ------------
    DxDiag Notes
    ------------
          Display Tab 1: The file aticfx64.dll,aticfx64.dll,aticfx64.dll,aticfx32,aticfx32,aticfx32,atiumd64.dll,atidxx64.dll,atidxx64.dll,atiumdag,atidxx32,atidxx32,atiumdva,atiumd6a.cap,atitmm64.dll is not digitally signed, which means that it has not been tested by Microsoft's Windows Hardware Quality Labs (WHQL).  You may be able to get a WHQL logo'd driver from the hardware manufacturer.
            Sound Tab 1: No problems found.
              Input Tab: No problems found.
    
    --------------------
    DirectX Debug Levels
    --------------------
    Direct3D:    0/4 (retail)
    DirectDraw:  0/4 (retail)
    DirectInput: 0/5 (retail)
    DirectMusic: 0/5 (retail)
    DirectPlay:  0/9 (retail)
    DirectSound: 0/5 (retail)
    DirectShow:  0/6 (retail)
    
    ---------------
    Display Devices
    ---------------
              Card name: AMD Radeon HD 8610G
           Manufacturer: Advanced Micro Devices, Inc.
              Chip type: AMD Radeon HD 8610G (0x990F)
               DAC type: Internal DAC(400MHz)
            Device Type: Full Device
             Device Key: Enum\PCI\VEN_1002&DEV_990F&SUBSYS_1995103C&REV_00
         Display Memory: 3150 MB
       Dedicated Memory: 737 MB
          Shared Memory: 2413 MB
           Current Mode: 1366 x 768 (32 bit) (60Hz)
           Monitor Name: Generic PnP Monitor
          Monitor Model: unknown
             Monitor Id: AUO32EC
            Native Mode: 1366 x 768(p) (60.016Hz)
            Output Type: Internal
            Driver Name: aticfx64.dll,aticfx64.dll,aticfx64.dll,aticfx32,aticfx32,aticfx32,atiumd64.dll,atidxx64.dll,atidxx64.dll,atiumdag,atidxx32,atidxx32,atiumdva,atiumd6a.cap,atitmm64.dll
    Driver File Version: 8.17.0010.1267 (English)
         Driver Version:
            DDI Version: 11
         Feature Levels: 11.0,10.1,10.0,9.3,9.2,9.1
           Driver Model: WDDM 1.2
    Graphics Preemption: DMA
     Compute Preemption: DMA
      Driver Attributes: Final Retail
       Driver Date/Size: 3/12/2014 09:10:42, 1329352 bytes
            WHQL Logo'd: No
        WHQL Date Stamp: None
      Device Identifier: {D7B71EE2-DA4F-11CF-7F77-9F39BEC2C535}
              Vendor ID: 0x1002
              Device ID: 0x990F
              SubSys ID: 0x1995103C
            Revision ID: 0x0000
     Driver Strong Name: oem25.inf:cb0ae414d605de39:ati2mtag_Trinity_Mobile:13.350.1005.0:pci\ven_1002&dev_990f
         Rank Of Driver: 00E02001
            Video Accel: ModeMPEG2_A ModeMPEG2_C
            DXVA2 Modes: DXVA2_ModeMPEG2_VLD  DXVA2_ModeMPEG2_IDCT  DXVA2_ModeH264_VLD_NoFGT  DXVA2_ModeVC1_VLD
       Deinterlace Caps: {6E8329FF-B642-418B-BCF0-BCB6591E255F}: Format(In/Out)=(YUY2,YUY2) Frames(Prev/Fwd/Back)=(0,0,1) Caps=VideoProcess_YUV2RGB VideoProcess_StretchX VideoProcess_StretchY DeinterlaceTech_PixelAdaptive
                         {335AA36E-7884-43A4-9C91-7F87FAF3E37E}: Format(In/Out)=(YUY2,YUY2) Frames(Prev/Fwd/Back)=(0,0,0) Caps=VideoProcess_YUV2RGB VideoProcess_StretchX VideoProcess_StretchY DeinterlaceTech_BOBVerticalStretch
                         {5A54A0C9-C7EC-4BD9-8EDE-F3C75DC4393B}: Format(In/Out)=(YUY2,YUY2) Frames(Prev/Fwd/Back)=(0,0,0) Caps=VideoProcess_YUV2RGB VideoProcess_StretchX VideoProcess_StretchY
                         {6E8329FF-B642-418B-BCF0-BCB6591E255F}: Format(In/Out)=(UYVY,UYVY) Frames(Prev/Fwd/Back)=(0,0,1) Caps=VideoProcess_YUV2RGB VideoProcess_StretchX VideoProcess_StretchY DeinterlaceTech_PixelAdaptive
                         {335AA36E-7884-43A4-9C91-7F87FAF3E37E}: Format(In/Out)=(UYVY,UYVY) Frames(Prev/Fwd/Back)=(0,0,0) Caps=VideoProcess_YUV2RGB VideoProcess_StretchX VideoProcess_StretchY DeinterlaceTech_BOBVerticalStretch
                         {5A54A0C9-C7EC-4BD9-8EDE-F3C75DC4393B}: Format(In/Out)=(UYVY,UYVY) Frames(Prev/Fwd/Back)=(0,0,0) Caps=VideoProcess_YUV2RGB VideoProcess_StretchX VideoProcess_StretchY
                         {5A54A0C9-C7EC-4BD9-8EDE-F3C75DC4393B}: Format(In/Out)=(YV12,0x32315659) Frames(Prev/Fwd/Back)=(0,0,0) Caps=
                         {3C5323C1-6FB7-44F5-9081-056BF2EE449D}: Format(In/Out)=(NV12,0x3231564e) Frames(Prev/Fwd/Back)=(0,0,2) Caps=VideoProcess_YUV2RGB VideoProcess_StretchX VideoProcess_StretchY DeinterlaceTech_PixelAdaptive
                         {552C0DAD-CCBC-420B-83C8-74943CF9F1A6}: Format(In/Out)=(NV12,0x3231564e) Frames(Prev/Fwd/Back)=(0,0,2) Caps=VideoProcess_YUV2RGB VideoProcess_StretchX VideoProcess_StretchY DeinterlaceTech_PixelAdaptive
                         {6E8329FF-B642-418B-BCF0-BCB6591E255F}: Format(In/Out)=(NV12,0x3231564e) Frames(Prev/Fwd/Back)=(0,0,1) Caps=VideoProcess_YUV2RGB VideoProcess_StretchX VideoProcess_StretchY DeinterlaceTech_PixelAdaptive
                         {335AA36E-7884-43A4-9C91-7F87FAF3E37E}: Format(In/Out)=(NV12,0x3231564e) Frames(Prev/Fwd/Back)=(0,0,0) Caps=VideoProcess_YUV2RGB VideoProcess_StretchX VideoProcess_StretchY DeinterlaceTech_BOBVerticalStretch
                         {5A54A0C9-C7EC-4BD9-8EDE-F3C75DC4393B}: Format(In/Out)=(NV12,0x3231564e) Frames(Prev/Fwd/Back)=(0,0,0) Caps=VideoProcess_YUV2RGB VideoProcess_StretchX VideoProcess_StretchY
                         {5A54A0C9-C7EC-4BD9-8EDE-F3C75DC4393B}: Format(In/Out)=(IMC1,UNKNOWN) Frames(Prev/Fwd/Back)=(0,0,0) Caps=
                         {5A54A0C9-C7EC-4BD9-8EDE-F3C75DC4393B}: Format(In/Out)=(IMC2,UNKNOWN) Frames(Prev/Fwd/Back)=(0,0,0) Caps=
                         {5A54A0C9-C7EC-4BD9-8EDE-F3C75DC4393B}: Format(In/Out)=(IMC3,UNKNOWN) Frames(Prev/Fwd/Back)=(0,0,0) Caps=
                         {5A54A0C9-C7EC-4BD9-8EDE-F3C75DC4393B}: Format(In/Out)=(IMC4,UNKNOWN) Frames(Prev/Fwd/Back)=(0,0,0) Caps=
                         {5A54A0C9-C7EC-4BD9-8EDE-F3C75DC4393B}: Format(In/Out)=(S340,UNKNOWN) Frames(Prev/Fwd/Back)=(0,0,0) Caps=
                         {5A54A0C9-C7EC-4BD9-8EDE-F3C75DC4393B}: Format(In/Out)=(S342,UNKNOWN) Frames(Prev/Fwd/Back)=(0,0,0) Caps=
           D3D9 Overlay: Not Supported
                DXVA-HD: Not Supported
           DDraw Status: Enabled
             D3D Status: Enabled
             AGP Status: Enabled
    
    -------------
    Sound Devices
    -------------
                Description: Speakers / HP (IDT High Definition Audio CODEC)
     Default Sound Playback: Yes
     Default Voice Playback: Yes
                Hardware ID: HDAUDIO\FUNC_01&VEN_111D&DEV_76E0&SUBSYS_103C1995&REV_1003
            Manufacturer ID: 1
                 Product ID: 100
                       Type: WDM
                Driver Name: stwrt64.sys
             Driver Version: 6.10.6466.0000 (English)
          Driver Attributes: Final Retail
                WHQL Logo'd: Yes
              Date and Size: 3/13/2013 03:54:28, 546304 bytes
                Other Files:
            Driver Provider: IDT
             HW Accel Level: Basic
                  Cap Flags: 0xF1F
        Min/Max Sample Rate: 100, 200000
    Static/Strm HW Mix Bufs: 1, 0
     Static/Strm HW 3D Bufs: 0, 0
                  HW Memory: 0
           Voice Management: No
     EAX(tm) 2.0 Listen/Src: No, No
       I3DL2(tm) Listen/Src: No, No
    Sensaura(tm) ZoomFX(tm): No
    
    ---------------------
    Sound Capture Devices
    ---------------------
                Description: Internal Microphone Array (IDT High Definition Audio CODEC)
      Default Sound Capture: Yes
      Default Voice Capture: Yes
                Driver Name: stwrt64.sys
             Driver Version: 6.10.6466.0000 (English)
          Driver Attributes: Final Retail
              Date and Size: 3/13/2013 03:54:28, 546304 bytes
                  Cap Flags: 0x1
               Format Flags: 0xFFFFF
    
                Description: Stereo Mix (IDT High Definition Audio CODEC)
      Default Sound Capture: No
      Default Voice Capture: No
                Driver Name: stwrt64.sys
             Driver Version: 6.10.6466.0000 (English)
          Driver Attributes: Final Retail
              Date and Size: 3/13/2013 03:54:28, 546304 bytes
                  Cap Flags: 0x1
               Format Flags: 0xFFFFF
    
    -------------------
    DirectInput Devices
    -------------------
          Device Name: Mouse
             Attached: 1
        Controller ID: n/a
    Vendor/Product ID: n/a
            FF Driver: n/a
    
          Device Name: Keyboard
             Attached: 1
        Controller ID: n/a
    Vendor/Product ID: n/a
            FF Driver: n/a
    
          Device Name: HP Wireless Button Driver
             Attached: 1
        Controller ID: 0x0
    Vendor/Product ID: 0x0001, 0x0001
            FF Driver: n/a
    
    Poll w/ Interrupt: No
    
    -----------
    USB Devices
    -----------
    + USB Root Hub
    | Vendor/Product ID: 0x1022, 0x7808
    | Matching Device ID: USB\ROOT_HUB20
    | Service: usbhub
    | Driver: usbhub.sys, 4/27/2013 19:58:12, 496872 bytes
    | Driver: usbd.sys, 4/27/2013 19:58:12, 21736 bytes
    

    Hello:

    There is no graphics card AMD switchable for my model, even with a BIOS update.  That is right.

    Or is it still be grayed out as in the current state.  That is right. An update of the BIOS will do nothing to allow you to change the graphic memory settings.  Everything will be grayed out as before.

    So if I overload a game settings, from the middle to the extreme, this means that most of the 3 GB memory graphics will be allocated to catch the game? Or even will not use the 737 MB dedicated?   The laptop will initially use all the dedicated memory.  If that wasn't enough, he will then consume the maximum (2.4 GB) memory system available and put it to the chart.

  • Error on startup: "control Catalyst Centeris ignored supported by the version of your current graphics card driver.

    I downloaded this update - ATI Technologies Inc. - Display - ATI Radeon HD 3200 graphics. After the installation, I get this dialog at startup "the Catalyst Control Centeris not taken in charge by the version of the driver for your compatible graphics card. Please update the ATI graphics driver or enable your ATI card using the display manager. "I looked for the display manager but can't find it. What should I do?

    In the devices you can try to select your ATI device, properties, back the driver.

    If it does not, see my post above for information on where to get the driver

    Configure MSUpdate for Important / critical updates only and ignore the optional updates

  • I have 99.3 MB 3.00 KB free on my disk (f) for hp_tools, how can I increase the space?

    I have 99.3 MB with 3.00 KB free on my (f drive for hp_tools, how can I increase the space? just in case it is needed for updating more than tools.)

    Hello

    The folder N360_BACKUP is not here and should be deleted or moved to another location.  The file is created by using Norton backup, so this utility should be configured to store its backup files into a directory on the C partition or to an external device in order to avoid the warning of low disk space you may have been found.

    Best regards

    DP - K

  • Recommendations for a new graphics card for Prem Pro 2014 (Windows) which offers the Mercury Playback Engine GPU acceleration?

    Hello.

    I am inclined to believe that I could take advantage of GPU acceleration when editing as my PC is a little under spec. I have a card but when I switch to the GPU acceleration, it works but whenever I stop moving / play / rub on the timeline the preview screen becomes black.

    I don't know who might be the best card to get for my reqs. I don't think I put great demands on the software, but it still hurt. Most of my editing is the lengthy interviews 3-10 min. 2 camera multi-camera editing. I still need to change the curves of RGB, corrector of three way color, transitions and sometimes careful noise reduction. One of these leaves of evil from my PC. All the usual titles, music & voice etc. but nothing too heavy like movies or the insertion of a lot of video lines.

    I'm also a little casual work in After effects too.

    PC spec is:

    Intel Xeon CPU 1.86GHz (2 processors)

    12 GB of RAM, which I'll update to 16 GB

    64-bit op system

    Windows 7

    Radeon HD 5450 graphics card.

    Any guidance would be most appreciated

    Sousproductions wrote:

    Thanks for the link. Had a look. Needs a long look later as some useful knowledge contained in there. It refers to the CS6 so maybe info is not accurate enough, now for 2014, but good for me to learn more about graphics cards compared to the edition.

    1. CS6 was the basis for a large part of the PPBM7.com site, it has been updated with lots of new data.  The single point of reference on this site in the three versions of the same identical scenario download and is perfectly usable for CS6, CC (7 first) and CC2014 (first 8).  Run and sign up to see the results.
    2. If my assumption on your exact model of the CPU is just a new processor i7 with 4 cores is better than your two Xeons 4 strands because they have no hyperthreading.
    3. You cannot compensate for low performance CPU with a new GPU.
  • Bootcamp lost after the new partition (try to increase disk space for the window)

    I have Version OS X El Capitan 10.11.2. Here are the details on my system.

    So I tried to increase the space in the partition for the training camp by using disk utility. I created the new partition. But now I can't bootcamp while I restart the computer and hold down the option key. I tried this in the terminal:

    sudo fdisk e/dev/disk0

    p

    setpid 4

    07

    Pavilion 4

    p

    writing or w (tried both)

    There

    But it does not seem to pick up my bootcamp windows. I also tried to restore the mac as early date of backup via external hard drive, but that doesn't seem to help either.

    Here is the screenshot of the output. Any help would be appreciated. Thank you.

    Can you post the output of the following Terminal commands?

    diskutil list

    Cs diskutil list

    sudo TPG - vv - r see the/dev/disk0

    sudo fdisk/dev/disk0

    The "sudo" commands will prompt to enter your password, and there do not appear to come back. You can also see caution against improper use 'sudo' and the potential loss of data due to an "abuse" of the order.

  • I added a 128 gB microSD card to provide the space for my photos, (a second hard drive) but lightroom won't let me not import all the pictures that are already on the map. The only import option is 'copy', not 'Add '.

    I had a problem with Lightroom on Microsoft Surface 3.  I added a 128 gB microSD card to provide the space for my photos, (a second hard drive) but lightroom won't let me not import all the pictures that are already on the map.  The only import option is 'copy', not 'Add '.  I worked around this by mounting a network directory containing photos and imported from there.  Is it possible to stop Lightroom to see such a map as a camera?

    I have not tested, but it should work with Lightroom:

    http://stltechtalk.com/ultimate-Ms-surface-hack-fully-utilize-micro-SD-card/#.

    Not sure what happens if you remove the card and put in a similar SD card. I would like to test it so that you know what to expect.

  • Cannot find the driver for trident cyberaladdin graphics (display)

    I can't find the driver for trident cyberaladdin graphics (display).
    The game with the game Warcraft III.
    I downloaded directX 9
    I managed to install the game but I can not play.
    My graphics card is Trident Cyberaladdin T.g.f.o.p. summer HARVEST game producer told me that it is compatible. I tried to find the drivers but I did not find anything effective. On toshiba site there a driver but enough old (preceding the date that I bought the computer...)
    I put (t knox what to do and my son is very disappointed because he can't play with this new game.
    Thanks for your quick response.

    Hello

    As a first step, it would be interesting to know to what operating system your need for this driver? ;)

    Well this Chipset Trident CyberALADDiN-T (called Napa2T) was built in three Types of Toshiba laptops.

    The 6000 Satellite TE2000 and Satellite 6050. (Driverversion all with Version 5.01.2527.0128)

    Normally the drivers that you will find on the Pages of the manufacturer are not the real drivers. Only they are updating the drivers if there are known issues.

    So the only chance for you is to look threw the internet and look if someone else has used this graphics chip and offer are a newer driver than Toshiba.

    Sorry for the response, but I had the same problem with my Machine, but is a more recent revision of driver on another page of manufacturer.

    Good bye

  • The HD 5450 M dedicated graphics card not recognized DM4t: SOLVED

    I never actually had to post on these forums but be long time lurker ive encountered a big problem.  First stop, I have a HP-DM4T-1000 with switchable graphics and a HD 5450 M map.  Until very recently it works fine.  He was a Catalyst update a few weeks ago during which something I messed up, possibly the update got cancelled while underway I remember exactly.  After that Device Manager don't would not show more ATI graphics card and the graphics in switcable would not work.  Catalyst Manager would say that no device is found.  I already tried updating all ATI software and the driver doesn't have a chance to find this card on my laptop.  Only the integrated card works and I'm really eager to play torchlight 2 when it comes out tomorrow haha.

    Are there any available advanced techniques to search manually for a graphics card lost on a device without opening it to the top?

    Solved by myself, I had to boot into safe mode and the disabled card itself.  All I had to do was then turn it back on, start in normal mode and install the catalyst through ATI/SUPPORT/C: hard disk Control Manager.

  • How can I increase the space of name display in the form, material and specification of the nutritional profile?

    Problem:

    1. How can I increase the space of name display in the form, material and specification of the nutritional profile?

    2. how to increase display space for the name of the sheet in the history section at the top of the screen?

    Thank you

    Hello Nefertari,

    You try to view more characters in these areas?

    Each of these locations is plugable using custom plugin extensions.

    For example, you can go into extensions/config/CustomPluginExtensions file and add the following nodes under the node FormatPlugins.

    
    
    
    

    I think that the default values for the sites are set to 50 characters, so I had to be up to 100 characters (note NameMaxLength = parameter in the attribute FactoryURL 100).

    It will be applicable to all specifications, if you need something more specific, you will have to create your own class where you can check the type of technique.

    Make your own judgment in what concerns how enough will be the look on the screen after you increase the length to a large number, but you can always control the formatting in your own class.

    See this older post for more information https://community.oracle.com/thread/2562965

    Is that what you're looking for?

    Dmitriy

    .

  • New AOL e-mail: one quarter of the screen is blank on the right side, reducing the space for the e-mail subject line. Resize attempts do not work on the right side, so I can't expand the e-mail subject line

    The new AOL E-mail look, which yesterday began a quarter of the screen is blank on the right side, thus reducing the space for the e-mail subject line, which limits its usefulness. Resize attempts do not work on the right side, so I can't expand the e-mail subject line? Running XP pro and Mozilla Firefox 5. No problem with I.E.

    Thank you, these settings were already in place. AOL said now erase the cache, cookies and history... to solve, which worked. (I deleted the cache and a story time.)

  • When I click on close downcomputer the hourglass appears on the desktop for more than a minute before the closing down of the icon is displayed

    When I try to shut down my computer, I click on start > click on computer of closing and the hourglass appears on the Bureau for more than a minute, when the close icon appearsand I click on it, it takes about 2 minutes to turn off actually. Any suggestions

    We need more information!

    Borrowing another post by ElderL (the same "JoseIbarra' that Elizabeth23 already mentioned):
    Provide information on your system, the better you can:

    What is your system brand and model?

    What is your Version of XP and the Service Pack?

    What is your Internet browser and version?

    Do you have the Windows Desktop Search installed issue?

    Your system's disks IDE or SATA drives?

    Describe your current antivirus and software anti malware situation: McAfee, Symantec, Norton, Spybot, AVG, Avira!, MSE, Panda, Trend Micro, CA, Defender, ZoneAlarm, PC Tools, Comodo, etc..

    The question was preceded by a loss of power, aborted reboot or abnormal termination?  (this includes the plug pulling, buttons power, remove the battery, etc.)

    The afflicted system has a working CD/DVD (internal or external) drive?

    You have a genuine XP installation CD bootable, which is the same Service as your installed Service Pack (this is not the same as any recovery CD provided with your system)?

    What do you see (exactly) that you don't think you should see, and when you see it?

    What do not you think that you should see?

    If the system works, what do you think might have changed since the last time it did not work properly?

    ___________________________________________________________
    Once you answer these questions to the best of your ability, a lot of people here (don't forget that almost all of us are volunteers who are also using Windows XP) will probably be able to help quickly resolve your problem.
    That (ElderL also) might help, too (because its results will contain many answers to the above questions):
    Click Start, run and enter in the box:

    Msinfo32

    Click OK, and when the system info summary appears, click on edit, select all (Ctrl-A), copy (Ctrl-C) and paste (Ctrl-V) the information back here in your next reply.

    For video device and driver information, expand components, click view, click on edit, select all, copy and then paste the information here.

    There will be some personal information (such as the user name and the name of the system), and anything that turns information private for you, simply delete the pasted information.

    This will minimize back Q & A and eliminate guesswork.

  • Troubleshooting of League of Legends asUnspecified error has occurred. Check the logs for more information"?

    Original title: League of the legions of troubleshooting

    I downloaded League of the legions, but when I try to run it, he will not work he arrived asUnspecified error has occurred. Please check the logs for more information. Please help I don't know what to do?

    Hello

    1. You are making reference to League of Legends?

    I suggest that you do check and clean boot, if that helps to resolve the issue.

    How to configure Windows XP to start in a "clean boot" State

    http://support.Microsoft.com/kb/310353

    How to configure Windows to use a Normal startup state

    After you have used the boot is a way to solve your problem, you can follow these steps to configure Windows XP to start normally.

    (a) click Startand then click run.

    (b) type msconfigand click OK.
    The System Configuration utility dialog box appears.

    (c) click on the general tab, click Normal Startup - load all device drivers and services, and then click OK.

    (d) when you are prompted, click restart to restart the computer.

Maybe you are looking for