Motorola Connect does not

Similar Questions

• Satellite C70-B-306 - local network connection does not work

  Hello

  I have a problem with my internet connection, Wi - Fi works fine but when I put the cable with connector rj45 of the connection does not work.
  I see that my laptop want to connect but then the connection is lost again en it says cable is not connected. Who goes on and out.

  It passes between the cable and internet Wi - Fi connection. The cable worked fine on my desktop.
  What can I do? I have the laptop 1 week.

  René

  Hello

  What model of laptop do you have? Do you use the laptop with the original operating system preinstalled?

  Open Device Manager and check if the LAN CSA is listed and enabled correctly.

• Excite PRO 3G connection does not work after last update Android v4.3

  Hello

  I live in Italy and last Sunday (26 January) my excited PRO Tablet (model AT10LE - A - 10 H) received version Android 4.3.201121220.35.

  After restart my wifi works fine, all other app very well work, but my 3g connection does not work, mobile bar is empty and it says "no service".

  My sim card is ok. I used this sim card before the system update and I don't have a problem with Android 4.2.2.

  Please help me.
  Thank you

  > After reboot my wifi works fine, all other app very well work, but my 3g connection does not work, mobile bar is empty and it says "no service".

  Go to mobile network settings and search again for the 3G network.
  I had a similar problem with my Android Smartphone and my o2 provider
  I started to search for new, so I chose the O2 again and then I could solve the problem.

  In the case where this does not work for you, recommend you to reset the default Tablet (factory settings)

• P850 satellite and a WiFi - internet connection does not work well

  Hello

  My internet connection does not work with a Wi - Fi connection.
  I have laptop Satellite P850-131, which I bought a few months ago and I noticed that over the past two months the internet connection does not work well. When I connect to the computer shows that I am connected Wi - Fi connections, however there is no connection and I can't access the internet.

  I tried to do all the regular search but nothing works. Sometimes the message I get told that there is a problem with the DNS and other times with the IP address. However, with other computers I didn't have any problem at all to connect to the same Wi-Fis.

  All solutions?

  > When I connect to the computer shows that I am connected Wi - Fi connections, however there is no connection and I can't access the internet.

  If such a problem would appear again start the console (window BACK in typing CMS in search)
  Here, use the command * ipconfig / renew *.

• Satellite A200-1js: local network connection does not appear

  Hey people

  I have windows xp sp3 in my Satellite A200-1js but my Ethernet connection does not shut... and I saw this in my network connections:
  

  And in my etiquette system shows this:
  

  I installed the correct drivers

  Everyone knows what is happening?

  Thnkx

  Satellite A200-1js belongs to the PSAE6E series.
  Just a few questions:

  You would update you BIOS to the version of Win XP?
  If it isn't-> do this!

  Have you tried reinstalling the driver Realtek LAN 5.664.205.2007 from the Toshiba page?
  If it isn't-> do this!

• Network connection does not work after reinstalling Windows XP.

  Original title: problems with reinstalling XP.

  I had re format and re install windows xp but now my network connection does not work.  I have no IP address, even if my router and the pc are on DHCP. Device Manager tells me that the controller Ethrnet on the motherboard has no drivers, but I can't find a driver.  Any thoughts appreciated.

  Hi John Fisher_888,.

  You can download & install the drivers for the adapter from this link & check if it helps

  http://support.Dell.com/support/downloads/devices.aspx?c=us&l=en&s=Gen&SystemID=DIM_PNT_P4_8400&OS=WW1&OSL=en

  Hope the helps of information.
  Please post back and we do know.

• Unable to connect to a dial-up connection does not require a user id and password.

  It's kind of a weird question.  I have a new vista machine, and a user must always connect to a Government to start the connection via modem.  In XP, we used hyperterminal and everything worked well.  As hyperterminal is not available under Vista, we spent some time trying to get the vista switched from work.  He composed, negotiates, but when it comes to 'verification of the user name and password' connection failed after that right.  He has not set password to connect, the password entered only after you connect and you select the option to connect.

  Now, I copied Hyperterminal from a XP machine and was able to connect.  But using hyperterminal, none of the shortcuts that I do can be used.  They all come with "could not read session file: c:\. "c:\session.ht".ht."  I changed the location of the shortcut, the location of the hypertrm.exe, departure to the target location, etc...  The only way to get a recorded session to run is to open hyperterminal, and then click file, open and point to the location of the session.ht file.  It works, I suppose, but its not just a lot more, especially since this is not until the last the default location that you opened a file from.

  Ideally, I would like to use the connection to start menu.  Is it possible to force the connection does not send a user name and password?  He always says "verifying username and password" even though I left the empty boxes.  Or is this another problem with Vista and dial upward?  Any help would be greatly appreciated.

  Thank you.

  I thought about it... a bit, I've found a workaround.

  You can call hyperterminal for the prompt, using:
  Hypertrm c:\myfile.ht

  You open hyperterminal as we are used to having open when you click the .ht file in XP.

  Knowing this, you can create a shortcut to hyperterminal which calls the hypertrm.exe AND the .ht file

  Mine is:
  C:\Windows\System32\hypertrm.exe c:\Windows\System32\ohip.ht

  Bloody Government and their former systems eh?

  I hope this helps!

  Dave

• my remote desktop connection does not show the three options under DESK remotely

  my remote desktop connection does not show the three options under DESK remotely

  like that: -.

  Allow the connection of computers running any version of remote desktop
  or
  That allow the connection of computers running Office remotely with authentication NLA

  Are you sure your market Win 7 Ultimate or Pro? If your running Win 7 Home Premium, you cannot use Remote Desktop host/server mode and you will not have these options.

  Go in Start > run and type winver at the prompt to find out what version of your race.

  If you are running Win 7 Home Premium or Starter watch TeamViewer as an alternative.

  http://www.TeamViewer.com

• Why my wifi connection does not work correctly?

  I had problems with my computer for a while. The first problem I had was that after I hibernated my computer it would be even not show me internet connections. I discovered that the hibernation of the computer can sometimes cause this problem. A little later that I realized that even when the computer had not been put into hibernation for weeks sometimes started upward with the same problem. He said networks is not available and there is a red cross on a box where my wifi bars should be. I had to reboot my computer up to 5 times to get the bars will appear. When he did not connect to all pilots and equipment I need to connect does not even appear in the control panel. The other times where it worked the drivers were all there. I don't know yet how this can happen. The other computers in my home connect very well and are able to interact with each other at high speed and get internet just fine.

  Recently, I lost any connection even when I rebooted my computer 10 times it doesn't.

  I came across a thread that told me to access prompt as administrator and type in this

  netish int ip reset

  I was able to connect to my network now, but he says no access to the network or Internet. I also tried typing in this...

  ipconfig/flushdns

  now I can access the internet and communicate with other computers. I tried to play Minecraft while my friend was the host through the router, but the connection was so slow that it was as if I was looking at the past in slow motion. I crossed several times and abandoned. The internet is too slow. It's like I'm on dial upward, but it should be high speed, I don't know what the problem is. What else I can watch on my computer to help me solve this problem? Should I restore it to factory settings? Or is something broken?

  Hi Veronica,.

  Thanks for the reply.

  Sorry to hear about the inconvenience caused.

  According to my understanding, you are having trouble with internet connectivity.

  You upgrade windows or what was the first operating system installed on the computer?

  This problem is mainly due to drivers get damaged.

  To rectify the problem, you will need to uninstall the current network using Device Manager drivers and install the latest drivers from the computer manufacturer site.

  Please refer to this sub article, which will guide you to uninstall the drivers using the Device Manager:

  https://msdn.Microsoft.com/en-us/library/Windows/hardware/ff553572%28V=vs.85%29.aspx?f=255&MSPPError=-2147217396

  To download the latest drivers from the computer manufacturer site, see the link below:

  http://www.ASUS.com/in/supportonly/U56E/HelpDesk_Download/

  Hope this information helps, for assistance please answer.

• Socket connection does not work with SIM network

  Hi all

  I created a socket connection. It works fine when I use the WiFi and iam able to download the data and get a correct answer successfully.   But when I use the network GPRS/SIM I get "Unauthorized response" as an answer. I already check with the default blackberry, here internet browser works very well.

  Can someone tell me why socket connection does not work when I use the SIM card network.

  If anyone knows about internal or the following BlackBerry setting that also tell me

  "Option-> advanced-> TCP Option.

  Thank you

  Neeraj Chauhan

  Thanks Peter,.

  For your support... Now my application works very well in both cases (SIM and Wi - Fi network). So I close my ticket.

  Thank you & best regards

  Neeraj Chauhan

• Motorola Milestone does not connect to the corporate network after updating to Froyo...

  I've updated my Milestone that is the version of Froyo UNITED Arab Emirates yesterday after a long delay, was really excited all night until I've discovered two problems with my wifi.

  The device does not connect to the corporate network, as my office uses EAP 802.1 x and there is no place to enter proxy where my friends using samsung galaxy s (Froyo 2.2) connect to the network and navigate using the wifi settings advanced to enter the proxy in their device.

  Any help? Please, I beg you.

  Hey Ronald, I've updated by upper about the update saying that UNITED Arab Emirates and EGYPT got last week. Don't know if the Saudi version has achieved, you have the Saudi Version or is it the same in the UNITED Arab Emirates. If his UNITED Arab Emirates you can do it via the PC using Software updater by Motorola...

• Connect does not show my devices

  The Chrome Extension connect reported that it could not connect to my phone this morning, as it is fairly typical. I usually get running again by launching the Connect app on my phone and set up the Extension Chrome device again. Annoying, but not really a big deal.

  This morning, I launched the Connect application and it all comes with the screen just "Let's get started" as if no device had been in place... apparently losing track of my old camera of Extension Chrome, but also my 360 motorcycle. Heavier sign.

  BUT... I went to re - establish a 360 motorcycle by clicking on the + selection of bike 360 and it takes me to the screen for my watch (mirroring the current configuration - the watch dial, name, etc.) and even said 'Connected' in the upper left corner. But I go back to the main screen of Connect (whether by the return key or click on the image of the watch) and it does not always list the 360.

  Seems to be no way to get the device on the list, even if the app knows he has set up and connected.

  What can I do?

  It's so frustrating that even if I have one totally Motorola ecosystem soup - aux-Noix, I still have problems like this. I could understand (or almost) (a little) if I had another phone of the manufacturer, an other helmet manufacturers and one other manufacturer watch... but it's all Motorola. You would think that they would test at least their devices so that they work perfectly together!

  I had a similar experience after the Android 5.0.2 on my 360 motorcycle. I solved it by United Nations-paring my 360 my Turbo, by restarting the 360 and the Turbo and then re-matching. Then I went to Moto Connect and re-added via +. I confirmed that the 360 showed as connected Android wear on and then returned to motorcycle Connect and confirmed the same thing. After some moments of my bike 360 complain finalization Motorola connect configuration, I went to wear and re - sync apps and everything has been good since.

  I hope this helps!

• Apple music Connect does not appear on my account

  Hi everyone, Apple music service Connect still does not work in this country (Turkey) Apple music service this completely from six months ago. But except Connect. Why? I have never get feedback and find info about it.

  In addition, I can't configure nickname and there is no other choice «Next artist» Those related to my tab 'For you '.

  Try to contact Apple on Twitter: @AppleSupport

• Automatic connection does not work after re - install

  Visited bad link in Facebook! Subsequently, forced to re - install Firefox - from scratch! Saved some files profile as Favorites, passwords, but no extension tricks. Re-installed FireFox after removal of ALL titles I could find in Program Files, Program Files (x 86) and Windows 7 Pro profile.

  When visiting a page that requires a login, Firefox correctly fills the username and password. BUT it does not start the connection. In the past, it was essentially a background process and not really visible to me. Now, stop at the page requesting credentials and click on the button "login".

  I have 'THE VIEW', 'NOSCRIPT' and 'ADBLOCK PLUS '. ALL my plugins are in mode 'ask to activate '.
  I enabled extensions: 'ADOBE ACROBAT - create PDF 1.2' and 'Trend Micro NSC FireFox Extension 5.82.0.1056.

  I would definitely get FireFox to work as it did previously. I don't know where watch/tweak!

  Thank you
  WLPeavy

  Thank you. It was the cookies which were to be saved. I had no idea of the automatic logon which is recorded. Thanks again.

• A WI - FI connection does not work on Satellite C50-A-179

  Hi all!

  I am owner of laptop Toshiba Satellite A-C50-179 (PSCGAE) with Windows 8, and recently I tried to install Connectify on it.

  However, Microsoft Virtual WiFi Miniport Adapter was missing on the laptop and given this Connectify couldn't work. I tried to activate/install somehow using advice found on the internet. The suggestion was to reinstall the driver for the wireless adapter.

  I uninstalled the driver original and reinstalled again after you download from Toshiba Web site ([here | http://www.toshiba.eu/innovation/download_driver_details.jsp?service=EU&selCategory = 2 & selFamily = 2 & selSeries = 312 & selProduct = 7934 & selSh ortMod = 3969 & language = 13 & selOS = 40 & selType = 97 & yearup load = & monthupload = & dayupload = & useDate = null & mode = al lMachines & search = & action = search & macId = & country = all & selectedLanguage = 13 & type = 97 & page = 1 & ID = 86778 & DISO = 40 & driverLanguage = 42])

  I'm sure that I downloaded and installed the right driver for the right card that is "Qualcomm Atheros AR956x Wireless Network Adapter". I made prior to installation to verify all the information on the adapter and the driver.

  However, after the relocation wifi stopped working completely:

  -l' icon/network adapter wireless connection 'Control of the network connections and Internet\Network' is there but it does not behave as it should, it looks like a generic and not specific to a network connection icon - basically, it does not represent the actual adapter and got the name of it in the note;

  WiFi - option in Windows 8 settings menu-changes PC network settings has completely disappeared (bluetooth option is still there and so is the flight mode option);

  -wifi can be turned on by pressing on activate in the menu of RIGH click that generic network connection I mentioned, but it will not pick up any signal and will find all the same connections so it is certainly.

  There is no yellow exclamation point in Device Manager list and the wireless adapter is thus, to act and to pretend as if everything is fine and working properly.

  I tried troubleshooting, installing the driver using Windows Update, the installation and update of its properties menu driver in Device Manager and all kinds of things like that, but none of this has helped and wifi still doesn't work.

  Basically, the laptop seems to think that the adapter is not working properly and everything is fine HW and SW wise, but in reality it is not. I don't really know what I should try, I don't want to reinstall the entire operating system, because I'm afraid (or I) would mess everything up even more (wasting yet more pilots).

  I'm running on a cable internet connection now, and I'm happy it's working (I really need the laptop for work and I can't afford to lose for a day, not to mention some more)

  Could someone help me please?
  Any ideas how to solve this problem and make the wifi working again?
  I will be really grateful for any advice.

  Thank you, Miko31.

  Problem is that Toshiba does not support the third party software and if the problem occurred after installing Connectify you should contact support and ask for help. I mean they know how their software works and perhaps a workaround solution that can help you.

  This software is not known to me, but I can imagine there are now a few conflicts. What should do? It is not easy to say. Try to remove the preinstalled software and clean the registry entries.

  In the worst case, you must reinstall OS and reuse for laptop with factory settings.