Motorway E v8.5.1 / / URI Source of change for a call out

Similar Questions

• Using the NI 9403 module as a source of tension for its own entries

  I need to have certain diagnoses in a circuit that I build. I plan on the use of certain relays to throw a switch when certain events occur. This switch would be connected to a digital input NI 9403, as a way to detect the event.

  To do this, I need power the switch itself, so he spends a tension that the NI 9403 module consider a digital camera 'high '.

  Can I buy a power supply of 5V, but is expensive compared to what it should only do. I was wondering if it's permitted use / safe / sane... at one of the NI 9403 pins as a digital output and use it as a source of tension for switches? According to technical data sheets, I should be fine for power supply. I'm not sure if it's a decent way to do this.

  My finished project requiring a current amplifier Board, I had to weld. So I decided that I might as well just add a voltage regulator to this Council and some resistance to simplify power. I never tried to use the NI 9403 module as a source of tension.

• source code open for mechcommander gold game

  Victorinox original title: Microsoft salvation

  can Microsoft me source code open for mechcommander gold?

  Thank you
  www.mechcommanders,ShortURL.com
  Andy ;)

  Hello Andy Tozer,.

  The question you have posted is related to the MechCommander game and would be better suited in the support of Microsoft MechCommander game.

  I suggest you to consult the following link for more information.

  http://www.Microsoft.com/games/mechcommander2/default.aspx

• When opening Legacy Family tree, I received a message "Please wait while windows configures DAO. Then "error 1706. No valid sources were found for the DAO product.

  "Error 1706.

  When opening Legacy Family tree, I received a message "Please wait while windows configures DAO.  Then the message "the feature you are trying to use is on a network resourse which is not available. Then "error 1706. No valid sources were found for DAO product. "  I uninstalled Legacy and reinstalled, but the problem persists.

  Heritage it's a windows problem.

  try to run a file system Checker

  Start-> Run-> cmd
  In the prompt, type: SFC/scannow
  The scanner

  Reinstall the product

• I get the error code 1706 - valid no source is found for the product my Hub. Windows install cannot continue.

  I get a pop up saying error 1706 that valid no source is not found for the product my hub. Windows install cannot continue.  Also "the feature you are trying to use is on a nework resourse which is not available."

  Can someone tell me what to do and what is the problem

  Thank you

  Hi Traceyjane,

  (1) when exactly it happens?

  (2) do you use the computer as an administrator?

  (3) what is the number of brand and model of your terminal?

  If you try to install the software for your hub, make sure that you install the correct package for your computer.

  Step 1: Try to install the program as administrator right click on the installation program files and select run as administrator , click continue if you are prompted to confirm.

  Just check the items below that addresses a similar issue

  The feature you are trying to use is on an unavailable network resource
  http://support.Microsoft.com/kb/828376

  You receive an "error 1706. Valid any source not found for the product

  http://support.Microsoft.com/kb/253768

  Thank you, and in what concerns:

  Ajay K

  Microsoft Answers Support Engineer

  Visit our Microsoft answers feedback Forum and let us know what you think.

• Is this possible in E10 to extract data from traffic source Web site for a subset of pages on a site?

  I know that there are ways to draw search engine data, data of social media and then the site as a whole, but I'm looking for the ability to find data from sources of traffic for a specified page of a site group. Is this possible in Eloqua 10? Thank you

  Hi Melissa,

  I think that's what you're looking for:

  If you run the report Page Navigations of Insight, you can then filter on "Web Page" choose only the subset of pages on which you are interested to report. The report will then show you all the previous pages (traffic sources) that were visited before visiting an of these subset of pages. The only downside is that it shows it as a 1:1, it will show all the previous pages for Page A, all the previous pages for Page B, etc. - so you can see the same previous page on the list several times. You can export to Excel, however, and twist a little bit for us hopefully get final report wanted.

  Hope that helps!

  Kim

• The server reboots required when the data source is changed?

  Whenever I create a new Data Source, or change the Source of existing data from the server asks for the restart after clicking on the button "activate changes. Is it necessary every time when the DS is changed?
  
  Can someone clear my doubt as soon as POSSIBLE.
  
  Thanks in advance.
  
  -Prasad

  Hello

  I think it must refer to a particular data source restart not restarting the server. What that does show when you click on reboots and view changes in the upper left corner of the Weblogic console.

  Kind regards
  Neeraj Sehgal

• Source of inspiration for the design of Web sites - where are you?

  Hello.

  I apologize if this belongs somewhere else. Please ignore if this is the case.

  I was wondering where to find the right source of inspiration for a design of business websites. I tried dozens of large enterprises, small businesses and others and have not really found something that looks pretty good.

  I want something that fills 100% of the browser window, is only designed in XHTML and CSS and have a column layout. Preferably with a white background.

  Can someone suggest a good source of inspiration. I searched for days without result.

  Thanks in advance

  Inspiration comes in all forms and shapes.  I keep boxes of old magazines for ideas of plan layout and color.

  http://www.CSSzengarden.com/

  http://www.mezzoblue.com/zengarden/alldesigns/

  http://www.csselite.com/
  http://www.cssheaven.com/

  http://www.smashingmagazine.com

  http://www.alistapart.com/

  http://www.CSSDRIVE.com/

  Nancy O.
  ALT-Web Design & Publishing
  Web | Graphics |  Print | Media specialists
  www.Alt-Web.com/
  www.Twitter.com/ALTWEB

• Change the Source URI for outbound calls using VCS Expressway X8.2

  Hi all

  I would like a little help on a CPL script, that I'm working on. I lived all the examples of community support and I am always sick.

  We run on VCS X8.2.  What I've read, VCS X8.1 has introduced a few new CPL capabilities, including the node location CPL supports rewriting the regex-based source alias.  I would like to take advantage of this new feature. I'm looking for a tutorial or a direction more advanced examples using this new capability.

  Here's my question:

  I have an internal domain "CompanyA.local" and I have a public domain "Entreprisea.com". «My Cisco video endpoints register control VCS with a SIP URI of "[email protected] / * / .local'.»

  Receive calls from outside help "[email protected] / * / com" and the rules of research, I route calls properly internally.

  When I dial an external company, my endpoint is showing a video SIP URI of "[email protected] / * / .local"

  Of course, this isn't a SIP URI dial-able and should be changed to "[email protected] / * / .com'." "

  I know that this can be achieved using CPL, but I have not used this feature before.
  Any help would be appreciated.

  Please suggest an example script CPL I can review.

  I would use a Regex to cover all of my similar to the following endpoints:

  source-url-to-message-regex = "(.*) ' @CompanyA.local '"
  source-url-to-message-replace = "------[email protected] / * /"

  Thanks in advance for any help.

  oooooo, that answer above gave me the answer I was looking for. It does not work! It seems that the syntax for the xml file has changed from pre x 8 and x 8. Looks like I've been using the incorrect syntax. I was missing the AVA: in the clause to the proxy, which is my version of rule switch not working. Still don't know why the address switch did not work, but I prefer the rule-switch anyway, so no big loss for me.

  I've tested, and it is fully functional on my vm VCS x8.2 running lab

  
  
  "xmlns:TAA ="http://www.tandberg.net/cpl-extensions"
  "" xmlns: xsi = "http://www.w3.org/2001/XMLSchema-instance"
  xsi: schemaLocation = "urn: ietf:params:xml:ns:cpl cpl.xsd" >
         
           
             
               "[email protected] / * / ' >
                 
               
             
           
         
  

• Possible to use the main clock FPGA as a basic Source of time for the NI 9234?

  Hello

  I am running a NI 9234, and NI 9222 module on a cRIO-9114 chassis with a real-time 9022 controller, data acquisition on the 8 channels on the full sample rate, using the FPGA.

  My problem is the synchronization of the data, where the NI9234 is usually a late acquisition, compared to the NI9222. I tried manually delay the NI9222 to take the first samples, but so far without success.

  To solve this problem and also to ensure a rate of data more comparable on both cards, I was wondering is it possible to create a Source of time Base master for the NI9234 WITH THE FPGA (opposite to import from another NI9234 or similar module)? The NI9222 I already provide with sampling of the impulses from the FPGA (as expected with this module).

  Another issue would be the characteristics of the exact chronology of the two modules, including in terms of synchronization between the beginning of the acquisition and the first samples of data. I couldn't find any information about it...

  Thank you in advance,

  O Hoppe

  Hello!

  I've never heard of a possibility to use a time base FPGA with a module of Delta-Sigma.

  But I think that the question should be what has not worked to delay the signal and how you did it. Have you read this article?

  How can I compensate for delays of different group with the C Series Modules in LabVIEW FPGA?
  http://digital.NI.com/public.nsf/allkb/74EB238E1BCADD528625735300681A7D

  Can you give a more detailed description of your trial to delay acquisitions? Can you provide a code example?

  Best regards

  Christoph

• VeriStand "Custom Device" creation, including the different types of sources of code for simulation only

  Hello

  Before I ask my questions, I want to describe my problem:

  I would use VeriStand on a PXI system for simulation only. The simulation includes different types of sources such as Maltlab-Simulink-models, MultiSim SPICE models and code LabView for FPGAS-programming. Simulink models are available as a dll-file, generated with 'Real-Time-Workshop' and 'Simulation tool Kid. " They need to generate heavy duty, calculated by the modulation of the vector space and model the performance of a special converter. The MultiSim model will be transformed via a special VI in LabView code. I can generate code VeriStand (--> NI VeriStand--> Generate tools...). The PWM duty cycles of this dll matlab above are for LabView FPGA code entry. This will be the entrance of the gate of the tansistors of the MultiSim-model. Means, space vector modulation generates tension of the door and get the FPGA code to the ports of the inverter model.

  I am new in programming with VeriStand and LabView. I don't know how I can handle this. But NEITHER says it's possible. So my questions are:

  Is it possible to use VeriStand with more than one device Costum and simulate as a whole simulation. How can I associate different files.

  If this isn't the case, that I have to build a LabView Vi, where all the different sources of models are included.

  Is a walkthough or a user guide available, that I can use to fix my problems.

  I hope you can help out me. I need it for my bachelor thesis very fast. Thank you for your attention.

  Best regards Andre

  Here is a document describing how to create compiled LabVIEW templates and import them into NI VeriStand:

  http://www.NI.com/white-paper/12785/en

  The following link is a more general page describing several model and their support environments in NI VeriStand:

  http://zone.NI.com/DevZone/CDA/EPD/p/ID/6488

  Some additional modeling environments are supported, but not necessarily listed here since this is a growing list.  In addition, since NEITHER created a strategy of open model interface called NI VeriStand model framework, it would be possible to connect new types of sources of model in NI VeriStand without too much work.  Then the mapping tool, you found, makes the magic of easily to configure the connections of logical data between models.  You can also easily transfer each model to the individual processor cores, which contributes to the speed of calculation for system-level simulations.

• Edge counting and Source of Timing for timed loop on the request for Acquisition of data - not acquiring data on specified rising edge

  Operating system: Windows XP

  Hardware: PCI 6259

  Terminals used: PFI0 and PFI2

  Counters used: Ctr0 and Ctr1

  IM developing an application for the acquisition of data where timed loop synchronization source comes from my PFI2 (using the string A of an encoder).  IM basically trying to acquire data based on the number of ticks from my encoder.  For the synchronization source, I use counter 1 to capture the rising edge and have the loop time-acquisition of data.  At the same time, Im using the counter 0 to count the number of rising edges so I know exactly in what tick data was acquired.  PFI0 and PFI2 are connect to channel A of the encoder.

  Questions:

  Timed loop acquires data at each tick, because when I discover the data (text) file is missing count of my encoder value.  Is it because there is a limitation on the Windows operating system?  I used a noculars to measure the frequency at the maximum rotation of the channel encoder and 6,757 kHz.  All solutions?

  Also, is there anyway I can route the source channel internally an encoder to generate synchronization source instead of using another counter?  I have attached my VI.

  Hello

  All the samples that you acquire will be read by LabVIEW in a sequential manner. Figure 4-21 on the M-series on page 80 (4-34) shows that you will acquire all the samples you request all channels that you enjoy in sequentially.

• Vista - Error Code: 1706 (cannot install updates) valid any source not found for product Microsoft works9, which came with my vista

  Microsoft Works 9 came with my Windows vista Home Premium April 14,2009, I leave automatic updates do their thing, such as recommended and I was prompted to restart. So I did.    Now it always tells me I have the same important updates 3.

  (A security update for Microsoft Works 9 (KB2092914) and office 2007 (KB2251419) word and office system (KB2277947).

  So now, he tells me when I click on ms works, that the error 1706 no valid source could not trading for the microsoft works product. Windows install cannot continue.

  That's the only change I made to my computer, so I did what I could do,

  I contacted HP for help and we have tried everything and to

  Discover that now my "D" drive is corrupt also.

  I would like to know how I can get back my program without making a recovery or even buy it?

  I really hope someone out there can help me.

  You know I bought an XP in 2003 and it is still a good kicking.

  Thank you

  Hello

  You can check if the error message you get when you try to use the application is due to the failure of the installation of the update of Windows related to Microsoft Works.

  Step 1:

  Check in Windows Update history if the installation failed or not for the 3 articles mentioned.

  To open Windows Update history

  (a) click theStart button,.

  (b) go toControl Panel,.

  (c) selectprograms, and then, under programs and features.

  (d) clickview installed updates.

  (e) search for update driver for the printer, get the KB article number.

  Step 2:

  You can perform a restore of the system on the computer to restore back the previous settings control also if Microsoft Works works.

  Note: When you perform the system restore to restore the computer to a previous state, programs and updates that you have installed are removed.

  For more information follow the link below.

  System Restore: frequently asked questions

  http://Windows.Microsoft.com/en-us/Windows7/system-restore-frequently-asked-questions

  Step 3:

  If the installation fails, try to install the updates manually and check what is happening. Click the links to download the three updates mentioned.

  Update of security for Microsoft Works 9 (KB2092914)

  http://www.Microsoft.com/downloads/details.aspx?FamilyId=feb121ad-e5f6-40E2-BF12-045ae5c2a754&displaylang=en

  Update of security for Microsoft Office Word 2007 (KB2251419)

  http://www.Microsoft.com/downloads/details.aspx?FamilyId=0d7210a3-662e-41e7-AFFC-ae94f9d89388&displaylang=en

  Update of security for Microsoft Office Word 2007 (KB2251419)

  http://www.Microsoft.com/downloads/details.aspx?FamilyId=ed5b9671-651d-41F3-aed3-93ee8a28657f&displaylang=en

  Note: Before to install updates manually set the computer to clean up state of startup and then continue with the installation. To configure your computer to clean boot follow the link below.

  How to troubleshoot a problem by performing a clean boot in Windows Vista or in Windows 7

  http://support.Microsoft.com/kb/929135

  Note: Once you have finished installing the updates, follow step 7 article to start on normal startup.

  Hope this information is useful.

  Amrita M

  Microsoft Answers Support Engineer
  Visit our Microsoft answers feedback Forum and let us know what you think.

• How to release the source code (only) for first level VI?

  Hello

  I develop an add-on for an application that I have. The demand is large (more than 1,500 VI) and the screws are set up to compile with for most of the default settings (there is a first level VI, some with visible front, most of them are not visible).

  The customer wants that source code for the work that I do, and he will use the many existing Subvi. The addon itself will be a Subvi (I have a Main.vi that basically opens 'front' and it is a new screen). The sub - VI existing basically make data collection and treatment, and the new code will perform additional processing and have a nice GUI for existing code. The customer wants the source so that they can make changes as needed.

  Is there an easy way to simply provide the source for the first level VI? Basically, I want to give them M.vi, where M.vi name n.vi, o.vi... etc, but o - z.vi should be non-free. In addition, M.vi is called by Main.vi, which opens A screens - M.vi

  One option is to copy the entire application, then open each sub - VI and save it without Source Code. But with so many files, this seems like a bad idea. So, I also maintain two applications.

  Good ideas out there? It seems if easy in other languages (using object files) it looks like there should be a solution here I don't see... Thank you!

  rnelsonee wrote:

  Ah! I completely forgot to Save with Options. It's been so long that I had to deal with this type of problem.

  OK, to ensure that:

  I opened my first level VI, saving Options with-> apply the password (or remove diagrams) and then give it to them. I also provide a normal backup of their VI, with source.

  I still about 100 screws which are called dynamically are not part of the VI treeand I would still have to re - register with a password, but it's better than every single VI. Thank you!

  Use the option duplicate hiarchy and preserve...

  apply to all...

  at least as far my memories are good.

  Ben

• SSRS for lack of outer join with the Oracle data source

  It seems to be a problem with the Oracle driver used in the Reporting SERVICES query designer.

  When you use an Oracle data source, if I create an outer join in the graphic designer, it automatically inserts '{OJ' before the join and '} ' after her.  This is an incorrect syntax for Oracle and refuses to start.  The curly braces and the JO editable in designer text, but if I go back to the graphic designer and immediately to reintegrate them.

  Only, this has started to happen a year or two ago - before that it worked, but with the old (+) syntax.

  Can it not be healed?  It makes things very difficult.

  -Geoff

  Hi Geoff,

  Thanks for posting in the Microsoft Community.

  However, the question you posted would be better suited in the Forums of the Oracle Support; We recommend that you post your query in Oracle Support Forums to get help:

  https://forums.Oracle.com/forums/main.jspa;JSESSIONID=8d92100c30d8fb401bcbd10b46c38c9ddf1a3242549a.e34SbxmSbNyKai0Lc3mPbhmSc3aNe0? CategoryID = 84

  If you have any other questions or you need Windows guru, do not hesitate to post your questions and we will be happy to help you.