Mount ACFS

Similar Questions

• Join mount acfs

  Hi all
  I have a problem when I wanted to save an ACFS mount point.
  Maybe someone here had the same problem in the past and can help me.
  

  node1:~ # acfsutil registry -f -a /dev/asm/apl-364 /home/ACFS
  acfsutil registry: ACFS-05062: cannot query CRS resource

  node1:~ # ll /dev/asm/apl-364
  brwxrwx--- 1 root asmadmin 252, 186369 Mar 11 11:10 /dev/asm/apl-364

  CRS is in place
  

  node1:~ # crsctl check crs
  CRS-4638: Oracle High Availability Services is online
  CRS-4537: Cluster Ready Services is online
  CRS-4529: Cluster Synchronization Services is online
  CRS-4533: Event Manager is online

  Thank you in advance.

  Hit you Bug 13617861 - crs-210: could not find resource 'ora.registry.acfs' (11.2.0.4 only). (Or at least, really looks like this.) This problem has been fixed in 11.2.0.3.3.

• Installation of the PSU on RAC (ACFS 12.1.0.2 database files) with

  Hi guru,.

  I hope that someone has experience with my problem. I want to install the latest patch of power supply on my cluster of two nodes (test) CAR 12.1.0.2 system. I'm running an Oracle multitentant 12.1.0.2 on this subject. Because I have the database files put on a filesystem acfs deployment of my different POWER Pack patch works then my other l11g as Rac clusters.  I read notes below (and of course the footnote to patch itself). But still I do not understand the exact point.  I understand not running opachtauto to patch that the grid a db env is not possible because in the end everthing will be starting but acfs is used and not mounted at this time. The following statement (from Note 1494652.1) works (after the instance is stopped) but is also the good systax for acfs database files?

  So I will try to go to pachting the grid and db separate House (is what they way forward?).

  But I can't find any documentation when start/editing of file system again is this before or after the db patch (or it makes no difference ?) or not to grid rootcrs - the postpatch?

  
  

  So please can someone who deals with this sharing his experiences. Thanks in adv!
  
  

  Run this command to stop the managed CRS of the resource of file system ACFS with resource name found in step 1.

  As user root, run:

  # srvctl stop d < path of device volume > filesystem n < node to stop file system on >

  Note: 1594184.1

  and

  Manually apply CW Patch (12.1.0.1.5) | Helmut RAC / JEE Blog

  and

  http://www.oaktable.NET/content/applying-PSU-121011-lab-environment

  Hello

  Thank you

  I found the solution after trying;

  1. stop the local instance

  2 srvctl stop filesystem d

  3 opatchauto applies/u01/software/patch/21523234 - ocmrf /u01/app/12.1.0.2/grid/OPatch/ocm/bin/ocm.rsp

  4. file system is automatic after the patch

  5. manual start of the local instance

  6. run the script

  It works

• Portfolio about ACFS

  Already have a volume of ACFS and mounted, but now when you try to create the portfolio, it was created, but no use, because it is leaving everyone, where as not closed the naima too.

  Please help/guide here, how I can accomplish:

  OS: aix 6/64 bin

  Oracle 11204

  Looking for step by step, how to create first on ASM ACFS (need to validate, I did something hurts), and then create purses on ACFS.

  Please help, thanks in advance.

  Managing keys administer is 12 c specific.

  Also, there is no need to restart the instance, everything you have to do is:

  -Remove cwallet.sso

  -run: alter system set portfolio close;

  -query: select * from v$ encryption_wallet;    -It should be in the "CLOSED" State

  -change the system of encryption open wallet set identified by 'pwd ';

• move from dedicated to shared ORACLE_HOME (ACFS)

  Hello

  is there a way taken in charge to change dedicated to Oracle RAC to a common house of Oracle on ACFS, but using the same Mount Point?

  for example, / u01/app/oracle is currently a local file system, but we have created a volume ACFS and my idea is to simply close the database instances, move the database software Oracle ACFS, disassemble the old file/u01/app/oracle system and set up the new system of ACFS files rather and restart instances of database.

  I guess I am having trouble with the oraInventory, but this should be easy to modify using detach and attach. Any other suggestions?

  Hello

  If you are just go back and do not change the path so that there will be no problems with oraInventory.

• Space released in not reflected in DiskGroup ACFS

  The GI version: 11.2.0.3/RHEL 5.8
  
  When I tried to add a file to a tablespace and I got the following error
  

  SYS> ALTER TABLESPACE JPMS_UAT_UATA ADD DATAFILE '+DATA' SIZE 10g AUTOEXTEND ON NEXT 128M MAXSIZE 30721M;
  ALTER TABLESPACE JPMS_UAT_UATA ADD DATAFILE '+DATA' SIZE 10g AUTOEXTEND ON NEXT 128M MAXSIZE 30721M
  *
  ERROR at line 1:
  ORA-01119: error in creating database file '+DATA'
  ORA-17502: ksfdcre:4 Failed to create file +DATA
  ORA-15041: diskgroup "DATA" space exhausted

  -I see 170 GB of free DATA Diskgroup. But I always got the error above
  

  SYS> select name, TOTAL_MB/1024/1024 TB, free_mb/1024 gb from v$asm_diskgroup;
  
  NAME                                   TB         GB
  ------------------------------ ---------- ----------
  DATA                           14.9914579 170.639648
  FRA                            24.5131664 3902.52637
  
  -- Tried Rebalance. It didn't help
  SQL> alter diskgroup DATA rebalance power 1;
  
  Diskgroup altered.

  We have an ACFS (/ ora_dump) that is created on top of DATA diskgroup.
  I have removed 400 GB of files in /ora_dump and it has been translated correctly in the output of df
  

  $ df -h /ora_dump
  Filesystem            Size  Used Avail Use% Mounted on
  /dev/asm/ora_dump-148
                        1.8T  1.2T  589G  68% /ora_dump

  But this space is NOT recovered in the DATA diskroup, the ALTER TABLESPACE... Failed again to the ADD DATAFILE command
  and v$ asm_diskgroup still showed the old values
  

  SYS> select name, TOTAL_MB/1024/1024 TB, free_mb/1024 gb from v$asm_diskgroup;
  
  NAME                                   TB         GB
  ------------------------------ ---------- ----------
  DATA                           14.9914579 170.639648
  FRA                            24.5131664 3902.52637

  Should it?

  You have a bad understanding of ASM and ACF. Think of ACFS as a single container stored in ASM file. While you have space in ACFS - this space is no longer available in ASM.

  Now for your problem of file create...
  Check if the ASM alert log. It shows that you have available of 170G (170 * 1024). which should be more than enough space. If something happens.

  Do you by chance devices of different size disk? Make sure that all your devices by disk group have the same size.

• ACFS is compulsory in 11 GR 2?

  DB version: 11.2.0.2
  Operating system: Solaris 5.10
  Number of nodes: 2
  
  I have successfully completed rack installation. I created disks for OCR, voting groups, and data files. Those starts was successfully mounted by the two instances of the DSO. I created the DB using DBCA. I can connect to tablespaces for instance, then created users, Node1 etc. But the Instance 2 is out of service. When I try to start the node seems to be suspended.
  
  Journal Alerts from the grid shows a lot of

  CRS-5014: Agent "/u02/grid/bin/oraagent.bin" timed out starting process "/u02/grid/bin/acfsload"

  I don't create any file system of the ASM Cluster using the ASMCA. Is - this mandatory? If it is required, how is it, I have an operational case without ACFS?

  Hello

  ACFS is not required to use, but is required to install and config ACFS (drivers).

  The resource of pilots Oracle ACFS (ora.drivers.acfs) is created by the Grid Infrastructure root script that runs after the installation of the grid Infrastructure. The resource instance Oracle ASM (ora.asm) means drivers resource as a low dependency. Therefore, the start action for the resource of pilots is also called whenever the start action for the resource ora.asm is issued. The start action for the resource of pilots includes support for Oracle ACFS drivers and ADVM Oracle Oracle Kernel Services pilot (OKS) in the operating system.

  Start the Oracle ASM instance during the installation process of the grid Infrastructure when Oracle Clusterware Registry (OCR) and files with voting rights are configured within an Oracle ASM disk group. In this case, the Oracle ACFS drivers are initially loaded during the Installation of network infrastructure based on the dependence of the resource. The Oracle ASM instance can also be started using Oracle ASM Configuration Wizard and the Oracle ACFS drivers are loaded based on this action. In stationary mode, the drivers Oracle ACFS are automatically loaded during the initialization of Oracle Clusterware when the Oracle high availability Services Daemon (OHASD) calls the start action to the Oracle ASM instance resource that translates also by loading the Oracle ACFS drivers because of the relationship of dependency on resource. The start action for the resource of pilots Oracle ACFS tries to load the Oracle ACFS and ADVM Oracle drivers OKS in the native operating system.

  My advice is:
  Even if you do not use the feature ACFS try to solve this problem.

  http://download.Oracle.com/docs/CD/E11882_01/server.112/e16102/asmfs_extra.htm

  Kind regards
  Levi Pereira
  http://levipereira.WordPress.com

• Bootcamp Windows - partition cannot be mounted

  Hey all,.

  I've been using Windows on my iMac (late 2012, Yosemite 10.10.5) without problem but today after I started MacOS Yosemite (to control simple file), cannot start again to return to Windows. Had no problem Bootcamp before... have not used to any advantage either 3rd disk utility. The only thing I have recently increased the Windows size 200 GB partition by decreasing the MacOS partition through disk utility (a month ago, no problem since then until today)

  1. Windows has disappeared from the startup disk

  

  2. disk utility shows disk0s4 gray and cannot be mounted. In addition, the correct partition size was 700 but here its listed as 500 GB GB (which was the old size before you increase it)

  

  3 when I try to restart with pressed ALT, Windows, but cannot restart, with a black screen showing "a disk error occurred.

  

  I'm not very familiar with techniques more. Only, I tried to install "Find" but cannot achieve anything with it.

  I tried your advice above and seems THAT NTFS is there...

  

  one last thing... when I try to check disk0s4, said "it should be repaired. When I hit repair; It says this:

  

  Need my Windows as soon as POSSIBLE, what more should I do?

  I don't have not upgraded to Sierra again. That I should? Or it will be even worse?

  I have tons of files on Windows that I need and unfortunately not supported for a while anywhere (sorry about that now).

  Help, please...

  stuff more to indicate...

  

  and I know if it's significant but cmd + s & ' fsck - fy "has not done anything other than check the Mac partition.

• MacBook Pro not mounting external hard drive

  My Macbook Pro (early 2015, running Mac OS Sierra) is not able to mount my [new] external hard drive (Seagate Backup Slim). It shows up in disk utility, but the volume seems shady. Nothing happens by pressing the command mount or performing first aid. Kindly help me out here.

  Hi vishesh97,

  Welcome to the communities of Apple Support!

  We understand your question that you have a new external hard drive, a backup Slim Seagate, which does not appear when you connect to your MacBook Pro.

  Allows because it is a new hard drive, try to clear the disc first and formatting for Mac OS extended (journaled). The instructions for this process are found in the article below:

  For Mac disk utility: delete a volume using disk utility

  See you soon!

• sparsebundle disk image not mounting

  I've recently upgraded to Mac OS Sierra and now I can not mount an image of disk sparsebundle.

  I enter the password, and then nothing happens.

  I tried the same image on a Mac running Leopard and it opens fine.

  I tried a few other sparsebundle some and other encrypted disk images not. Some are open very well, but others do not.

  So, it doesn't seem to be a problem of sparsebundle encrypted disk image.

  Any suggestions?

  After investigation a little more the problem is Sophos AV

  Turn it off and the disk mount fine images.

  I hope this helps.

• External hard drive mounting issues on MacOS Sierra

  After upgrading to OS Sierra, I found that my USB3 drives, directly connected to my iMac end of 2012, turn off at startup. USB 2 disks are unaffected and connect properly. The only way to access my USB3 disks is to disconnect and reconnect every time I start the computer, then they are ok. I tried to reset the NVRAM, but it did not work. I found Os El Capitan until this issue is resolved.

  Do not mount or actually turns out always the system start? It was not clear in your subject line and content later, what was going on.

  Are they NTFS formatted drives? See the solutions frequently asked and answered forum if they are.

• External hard drive will not mount after the update of the Sierra

  Hi, I have an a Segate 1 TB external hard drive that I have with my MacBook Air. After upgrading to Mac OS Sierra, he refused to climb and is therefore invisible in the Finder. Disk utility detects the drive in NTFS initialized and said that all the space has been used. I tried to mount it first through disk utility, but it did nothing. Then I tried via terminal, but he returns "failed to mount. It worked fine before and also works very well on a MacBook Pro running Yosemite. It may be nothing to do with the player, as all files are intact when it is connected to the other Mac. Also, I restarted in Mac utilities and run from there disk utility, and it detected the drive, mounted and fully initialized, with the right amount of space being exhausted.

  I am looking for a solution that does not copy the files off and reformatting if possible, but I'll give it a go, if it comes to that. Thank you very much.

  Most likely your Seagate drivers are not updated.

  NTFS is most likely the culprit here.

  Go to the Seagate site and download and install the latest drivers for your drive and NTFS.

  You can start here... http://knowledge.seagate.com/articles/en_US/FAQ/007770en?language=en_US & key = ka03 A000000tzbeQAA & k = n & wwwlocale = en - us

  Hope this helps, Greg

• EFI disk0s1 not mounted. screen shows gray with help file when I restart

  I had these problems with my recent Mac.

  1. it freezes for a few seconds. Then begins to work properly. And then freezes. The beachball keeps spinning and I can't access any of the applications.

  I tried restarting. But came up with another question. The gray screen of the charges and file aid continues to Flash.

  I tried from the recovery mode, but I get the Internet (OS X Lion). I'm under El Capitan. In disk utility, I check and repair the drive. Stop and try again. Now, there are two current icons and off - no logo entry sign and apple. If I'm lucky then after 40-50 seconds, Mac starts up.

  Now, I tried to make the EtreCheck, and he gave me more results for disc

  Disk information: ⓘ

  HTS545050A7E362 disk HARD APPLE disk0: (500,11 GB) (rotation)

  EFI (disk0s1) < not mounted >: 210 MB

  Macintosh HD (disk0s2) /: 499,25 (Go 110,18 free) - 70 errors

  Drive failure!

  Recovery HD (disk0s3) < not mounted > [recovery]: 650 MB

  HL-DT-ST DVD - RW GS41N)

  
  

  That's what worry?

  
  

  What can I do to fix these problems?

  Disk0 unit 1 is not the problem. This is the EFI partition, which is never mounted, because it is used only by the bootstrapper, long before that the file system is initialized.

  Your problem is 70 errors in disk0 tranche 2, the volume Macintosh HD. This hard drive (the entire disc) was his. Dead. in ruins. You need a new drive.

• Impossible to automatically mount network without password readers

  Hello

  First of all, I use MacOS Sierra, but I don't think that there is a forum for this yet.

  I have a mini mac which auto powers walk every day and basically sits there backing up files from multiple sources.

  One thing I need to do is to automatically mount a few files on my NAS.

  So far I have tried:

  • Use the Finder to use go-> connect to server, entering the mount point (tried with and without identification information in the path), ensuring that, when the dialog box that appears, I select the option to save the credentials in my keychain, then take this shortcut on the desktop and dragging it in my list of connection
  • With the help of Automator
  • Using AppleScript
  • Ensuring that all applications can use these passwords in the keychain without asking confirmation

  All these work the drive is mounted, but regardless of whether the name of user and password in the connection string or not and ensure that registration is set to password in the keychain, each time, I get a pop up asking for the name of user and password. It's always busy and all I have to do is click on the connect button, but it does not help on an unattended computer restarts every day.

  I was unable to get Apple script, click on the button to connect.

  Someone else you have this problem, or even better a solution?

  Thank you

  James

  You found a solution to this? If Yes, do not hesitate to share

• WD My Passport drive external drive will not mount once my Macbook Pro is already on

  Hello

  I actually had this problem for a year or two, but I'm finally getting bugged to this topic enough to see if it can be 'fixed '.

  I have a 2 to WD My Passport portable HD connected to my macbook pro via an external (wall outlet) powered TRUST 5 x USB3 Hub.  If everything is connected, when I start the macbook pro there is no problem and the WD My Passport is mounted in the finder.  But if I remove manually the hard drive and then try to mount it again while the macbook pro is running it doesn't mount not.  It used to, but he won't now.

  In the past the WD My passport would need to unplug and perhaps the USB3 hub would need power cable disconnect from him and the USB hubs out the macbook pro.  So when I joined this new and plugged the hard drive WD in the hub, it would rise very well.  But now it's just point blank refuses to ride until I restart the macbook pro.  Once I restart it it climbs perfectly and stays up forever--until it is dismantled manually - and then I have to restart the macbook pro again so he could mount once more.

  I tried all combinations of pull cables and adapters to power but nothing has worked.  After dismantling the WD hd and plug back on the USB3 light led on the hub hub lights up and the hard drive turns manually, but, as I say, it is not mount and it is not visible in disk utility.

  Any ideas please?  It's a bit annoying to have to keep restarting the mac whenever I had to unplug the hard drive WD.

  "As issued" WD Passport appear to cause a number of reports of trouble around here. You have already taken the first "not best" - using a powered hub. Just make sure that the hub is really power (lights on, for example). It could be that the external drive is in its death throws.

  This happen if the WD is the only thing on the powered hub?

  The Mac USB ports work with other devices?

  Here's what my experience with these things has believing me. WD made great bare discs, but I can't be so kind to their pens. Three questions:

  (1) I think that they should use chipsets which are not very easy to Mac.

  (2) most driving the ship formatted for Windows

  (3) even those shipped as "Mac editions have some odd which makes it difficult to access file formatting.

  If you do not have to share the drive with a Windows computer, you can reformat the drive and that often fixes "fail to mount/recognize" question. Disk utility is your tool of choice here because it is already installed on your Mac. Completely erase the WD drive by selecting the tab 'Clear' in the bar tabs to disk utility. Define the plan of Partition to GUID Partition map and journaled for Mac extended format. Press the button 'clear '. The reader will now will be rid of eccentric WD partitioning and formatting schemes and be a good Mac hard drive.

  If you share the road with a Windows computer, consider getting a better workout. After having fought external drives 'brand' on my computers and others that I maintain, I now use only boxes of other computer world with naked WD drives inside. Since this change, I have zero problems. For my MacBook Pro, I use this forum:

  https://eShop.MacSales.com/item/OWC/MEPMU3ES/

  I ordered the external power optionally for use at home and go on the road bus-powered. It's an empty envelope - just a hard drive of nu. They are more expensive than the stuff that Staples puts on sale every weekend, but are much more reliable. I ask the question. "What is my value data?"