Mounting of the homescreen of FDM

Similar Questions

• Target Disk Mode - MacBook is not mounted in the desktop iMac

  I have a MacBook to 2015 and a cable USB-A-USB-C marked 'SS '.  In November 2015, I might start my MacBook in TDM and plug it into my iMac 2013 and see him mount on the desktop.  I could then synchronize some of the files (using synchronize folders) and have up-to-date on my MacBook.  Both computers running El Capitan.

  But about 3 months ago this system has stopped working.  Editing of my MacBook on the desktop iMac became sporadic and now never happens.  I have tried different cables, connected to different USB ports (the back of the iMac, iMac keyboard and a Flash to USB dock (Belkin)), but no joy.

  Has updated the firmware of computers?  El Capitan has stopped this feature very useful to work?

  Any ideas, anyone?

  Chris

  As a work-around, there are other ways of synchronization of files between devices.

  iCloud Drive, Box, OneDrive, DropBox, Google Drive. These will make everything you do.

• Absent voice memo to the homescreen on IPhone SE there is no 'utility' or 'extras' anywhere; folder Siri is voice memo, but can not get to the home screen? How to apply for voice memo on the homescreen?

  Absent voice memo to the homescreen on IPhone SE there is no 'utility' or 'extras' anywhere; folder Siri is voice memo, but can not get to the home screen? How to apply for voice memo on the homescreen?

  Try going into settings > general > reset > reset home screen presentation.

• HP S2031 20 "monitor I want to mount on the wall. What size screws to mount?

  I have a monitor HP S2031 I want to mount on the wall.  What size screws I put in the monitor to attach it to the media.

  Thank you!

  Sandy59

  The series of HP products that monitor your S2031 comes from States, "this monitor uses the compatible VESA 100 x 100 mm installation ports." This means that there should be 4 screw holes, square shaped, at the back of the monitor to 3-15/16 inch independently of the other. In the monitor screw holes should have metric threads ISO "M4" and are typically 10 mm deep. The appropriate screws (usually 10mm shorter or longer) are normally provided with the stand.

• Cultures of the homescreen icons update

  I have an icon 32 x 32 pixels of the home screen.  The meat and potatoes of the image is a circular graphic 30 x 30, centered on the image.  All the surrounding pixels are transparent.

  To implement some sort of notification on the homescreen, I superimpose a 15 x 15 icon in the upper left corner of the home screen of 32 x 32 icon and use HomeScreen.updateIcon (Bitmap).

  After calling updateIcon(), the icon appears cropped on the edge of the pie chart 30 x 30.

  Front

  

  After

  

  This cropping only occurs when the notification icon is drawn on a portion of the icon to the home screen which has under transparent pixels (seems the operating system creates a mask by reversing the transparent pixels or something?).

  Any ideas?

  (Edit: tested on 4.3, 4.5, 4.6 simulators)

  This problem has been reported to our development team.

• dynamically change the HomeScreen application title

  Hi all

  As you know, we can dynamically change the application ICON on the home screen,

  what I want to know how to change the title of the application on the home screen.

  I mean when the user foucs on my application, text will appear on the screen.

  When I change an ICON, I want that the text will be changed according to the new icon.

  Is this possible?

  Thank you.

  Try the HomeScreen class - see the documentation of the api for HomeScreen.setName)

• Settings for blackBerry Smartphones Post update: have now double rows of icons on the homescreen instead of a row

  have a PET of brain.  I can't find the setting that will allow me to change the homescreen from 2 lines to 1 row. can anyone help?

  I use aussi.148. If you press the menu key once, you get the screen complete icon. Press it again and the sub menu should appear. There is a choice of options. Press and you should get the preferences of the home screen where you can change the number of lines.

  Once you have done the upgrade, have you done a reset with a battery pull. Try this as well.

• How to disable the homescreen in first CC 2015

  How to disable the homescreen in first CC 2015

  You can disable it but it leaves you in another weird situation about opening files. That is to say it will open the last project.

  Parameters of preference if you want to do

  I have just turn it off until it loads completely and open what ever project in the file menu.

• Run the file custom FDM webscript bat

  Hello

  I'm a guy essbase/planning being introduced to the world of FDM and I have a custom webscript base that runs a .bat file that needs to copy some files, no maxl, just a simple COPY of MSDOS commands. The script is the following:

  Dim strCMD

  strCMD = "\ < servername > \FDMAPP\COPYFILES.bat.

  API. DataWindow.Utilities.mShellAndWait strCMD, 0

  When I run the script FDM appears "the script was successfully run" with no errors in the log, but the files are not copied.

  I know that the file is is that I added a script that displays the bat script.

  Will be the mShellAndWait command work only for running maxl commands or all sorts of external processes?

  Thanks for your help

  Santiago Ruiz Ingelmo

  Problem solved, had security problems.

  Morning coffee thank you!

• Journal entry for the Runtime Error FDM

  Hi all

  I'm trying to run a Script to load batch Standard, but I still have the same error.

  I realized a FDM Appication, loading bacth script and data file (with that name 1 @JDE@Actual_Inp@August@RR ).

  Adapter, import formats, maps and location seems ok.

  THIS IS THE ERROR LOG:

  * Start the journal entry for the Runtime Error FDM [2013-09-24 12:59:06] *.
  -------------------------------------------------------------
  ERROR:
  Code............................................. 6
  Description... Overflow
  Process... clsBatchLoader.mExecuteParallelBatchProcess
  The component... upsWBatchLoaderDM
  Version.......................................... 1112
  Thread........................................... 4100

  Could someone help me?

  Thanks in advance

  Andrea

  Hi Andrea,

  Are there more entries in the log? In addition, you can load the file via the manual process?

  Kind regards

  Thanos

• Problems with the web app FDM

  Hello
  
  I am getting below error while running the data map in the web app FDM. FDM - 11.1.1.3 version. Where I could find the this error stack trace? Please could you help me solve this problem.
  
  
  Error - "an exception occurred during the execution of the current web request. Please contact the administrator to review the stack trace in the event log for more information about the error"
  
  Source: http://ProdServerName/HyperionFDM/AuthorizedPages/LogonPage.aspx
  
  Thank you
  Michel K

  This problem is resolved after removing the special characters to the corresponding Oracle table - tdatamap.

  Thank you
  Michel K

• Change adapter HFM after the upgrade of FDM 11.1.1.3 to 11.1.2.1

  Hello
  
  I've updated the FDM since version 11.1.1.3 to 11.1.2.1. The last step I think is to re - register the adapters to 11.1.2.1 FM11x-G5-E - version
  All know how with rebuild them the maps?
  
  Or pointers appreciated!
  
  Thank you
  PM

  The adapter is not related to the mapping table. Simply import the XML adapter and then save and configure the adapter on each application server in FDM in the environment:

  (a) to connect to the application of FDM via the established customer
  (b) choose file > import and select the file FM11x-G5 - E.XML and choose 'open '.
  (c) click on "Select all" and click "Import" to import the card in the application
  (d) copy the folder "AdapterComponents" which appeared in the card .zip file in the Oraclle\Middleware\EPMSystem11R1\Products\FinancialDataQuality\SharedComponents directory
  (e) choose file > adapter register and choose the AdapterComponents\fdmFm11xG5E\fdmFM11xG5E.dll file and choose 'open '.
  (f) make a right click on the FM11x-G5-E adapter and choose 'configure' and enter username/password / confirm password/domain of FDM Service account and click OK. * NOTE: This is the account that was used for the configs FDM (App Server, server load balancing, tasks, Web Config Manager)
  (g) choose Tools > Application settings and change the adapter FM11x-G5-E installation Code

  You can then syncronzie the settings of the adapter from the old to the new card by right-clicking the adapter Fm11x-G5-E and choose "Synchronize" and choose the adapter FM11x-G5-C as a source and click OK to copy the settings of the new card.

  You may need to update the target periods and categories in the Control Board on the web.

  That should be all.

• What is the location of the shared file in the automation of FDM

  Hi Experts
  
  1. What is a common FDM location where we put the file so that the FDM will pick up the file automatically in the automation of the FDM? Name of the directory in FDM?
  
  concerning
  Thaer

  Inbox\Batches\OpenBatch.

  The file must follow the following naming convention:

  ____.txt

  It comes with the separator defined as underscore in the processing Script batch file.

  As previously mentioned by Wayne, refer to the Administrator's guide FDM for more information about the batch.

• In the application of FDM data protection

  Hi all
  
  I just added a custom in HFM member and I want to the protection of data in the application of FDM to the individual custom member. Can someone tell me how to enable the protection of data in the application of FDM.
  
  Kind regards
  Sanjeev

  Hello

  There are necessary options for data protection in FDM.
  The integration settings in-> activate the protection of data, the value of Protection, operator Protection.

  Set these values and you can use the data protection service.

  You can browse the forums for more understanding:

  1 re: Data Protection switch - FDM

  2. data protection

  I hope that helps!

  You can mark as answer/useful if your Q is answered.

  Kind regards
  J

• Load the account with FDM ERPI

  Hello
  
  Is it possible to use the reconciliation account in the Source of FDM ERPI?
  
  I don't think but want to be sure.
  
  I use Oracle eBS R12, FDM ERPI 11.1.2 and Hyperion Planning 11.1.2.
  
  I have a hierarchy of GL account:
  Level 1: account
  Level 2: back
  for example:
  Income1
  Account A
  Account B
  Years2
  Account C
  
  I would like to have a map like:
  
  Source: Income 1; Target: 1 member
  Source: Income 2; Target: Member 2
  
  Thank you in advance for your help!
  
  Fanny

  Fanny,

  You cannot configure ERPI to provide parents of the segment values. Mappings for each account will be the only way to do it. Wild cards can make this easier, but it will still be a fair amount of work.

  Kind regards
  Matt