mounting points on a path?

Similar Questions

• Mount point of the external SD card

  The SD card works obviously, since I updated to 4.1

  I can't find the volume with Windows Explorer ARE. What is the path to the external sd card?

  Link to image

  Moderator comment: images > 50 KB converted for programming. Community rules.

  This clarifies the paths:

  The mount points are:

  / Import/Storage/sdcard0 /.

  / Import/Storage/sdcard1 /.

  /SDCard and /sdcard2 are aliases.

  Link to image

  To mount all readers with davdrive, just change the path in /sdcard davdrive to.

  Moderator comment: images > 50 KB converted for programming. Community rules.

• Questions of NFS mount points

  I have two questions about how the NFS mount points is in fact from the point of view NFS servers.

  If the mount point of the 'outside' is considered as for example / ISO, would this mean

  1. that the directory is named "iso" or could it be a real name on the local file system on the NAS Server? (As in the names of SMB share, could be different from the name of folder.)

  2. that the folder is actually located directly on the root of the local file system, which is/ISO on the server, or would it be for example/dir1/dir2/iso and always to the outside as appearance / ISO? (As in the SMB, where 'share' creates a new root somewhere on the filesystem that is exposed to the outside.)

  ricnob wrote:

  Thank you! It would be a typical NFS-Unix/Linux server?

  Yes.

  So perhaps it is not defined in the standard how this should be done, but can vary between implementations? (* nix of course most common.)

  Possible, but does MS ever meet standards? Even their own?

  RFC1094/NFS:

  "Different operating systems may have restrictions on the depth of the tree or used names, but also using a syntax different tor represent the"path", which is the concatenation of all the"components"(file and directory names) in the name...". Some operating systems provide a 'mount' operation to make all file systems appear as a single tree, while others maintain a 'forest' of file systems... NFS looking for a component of a path at the same time.  It may not be obvious why he did not only take the name of way together, stroll in the directories and return a file handle when it is carried out.  There are many good reasons not to do so.  First, paths need separators between items in the directory, and different operating systems use different separators.  We could define a representation of network Standard access path, but then each path must be analyzed and converted at each end. "

  AWo

  VCP 3 & 4

  \[:o]===\[o:]

  = You want to have this ad as a ringtone on your mobile phone? =

  = Send 'Assignment' to 911 for only $999999,99! =

• CFS mount point CARS DB

  Hi all
  I use a group of 11 GR 2 where CARS DB is created the CFS. I know CARS DB name, y at - it a command or file that will tell me the name of the CFS mount point that uses DB CARS.
  
  Thank you.
  
  Published by: user11305560 on October 22, 2010 12:30 AM

  user11305560 wrote:
  Hi all
  I use a group of 11 GR 2 where CARS DB is created the CFS. I know CARS DB name, y at - it a command or file that will tell me the name of the CFS mount point that uses DB CARS.

  After a command, you can use to check the ORACLE_HOME details:

  srvctl config database-d nomBDD

  Also to check the path:

  sqlplus / as sysdba

  Select file_name in dba_data_files;

  Concerning
  Rajesh

• Installation of E-Business... mount point?

  I try to install on RHEL EBS. I downloaded all the files of the Oracle's e-delivery Web site. I unzipped all the files downloaded from the site of electronic transmission.
  
  The decompression program created 5 folders 1. oraAppDB 2. oraApps 3. Orleans 4. oraDB 5. startCD
  
  As mentioned in the installation guide, I tried to run the adautostg.pl in the directory/startCD/Disk1/rapidwiz...
  
  Below are the details, as seen in the file and answered...
  
  Enter a path where the media pointing to be staged: / u01
  
  The stage space will be created in the/u01/StageR12
  
  Do you use AutoMount to mount/umount the media y/n? There
  
  Location Enter the mount point: this is where I am stuck. Can someone tell me what I need to put in this option. Directory/file must specify this option?
  
  Yet once I'm not installing a CD/DVD. I downloaded all files zip site oracle e-delivery in a folder and install EBS from there.
  
  Help, please. Thanks in advance.

  Hello

  Yet once I'm not installing a CD/DVD. I downloaded all files zip site oracle e-delivery in a folder and install EBS from there.

  When you use the e-Delivery Web site installation files you don't have to use script adautostg.pl to create the staging area directory, you just need to put all files in a directory (for example, / u01/Stage12), extract the files, and this will create the directory of staging area for you.

  Note: 406138.1 - using electronic transmission with quick installation in Oracle E-Business Suite Release 12

  Once you create the directory area of the stadium, run md5sum to verify the integrity of this staging area directory - see (Note: 802195,1 - checksums MD5 for R12.1.1 Quick Install Media) for more details.

  Kind regards
  Hussein

• How to restore the different mount point rman backup

  Hi all
  I have my RMAN bkp on my production under mount point/d01/rmanbkp server. I need to restore rman on TEST server. I don't have /d01 of mount point on my test server, so I need to restore to the point of different Assembly called /oraapps. I finished copying all my backup RMAN on TEST server, but when I try to restore it. He seeks his path of moose that is/d01/rmanbkp. Suggestions, how can I do.
  
  Concerning
  Musaddaq

  Hi Musaddaq,
  When you perform a restore on the test server after having mounted the controlfile enables control of catalog catalog of the backup pieces in the new directory structure.

  CATALOGUE START WITH ' / oraapps';

  Kind regards
  Tycho

• Installer ask mount point?

  I try to install on a MacBook Pro 13 "Yosemite, but it asks for: "a disk with a mount point is needed"

  Can someone tell me what it is? I formatted the HDD MBP and have an external drive with Yosemite and a Flash DRIVE with the software to install.

  Help, please.

  Logan_VII wrote:

  I formatted the HDD MBP and have an external drive with Yosemite and a Flash DRIVE with the software to install.

  It is unclear where you try to install Yosemite.

  Open the DiskUtility to see if your external hard drive is recognized, you can force mount the drive in the menu drop-down

  DiskUtility > file > install

• I have an error: a drive with a mount point is required - what it means?

  I have an error: a drive with a mount point is required - what it means?

  Please explain EXACTLY what you were doing before this message appears.

• Disk monitor mount points

  Is there a way to monitor the disk mount points in Big Brother (Windows Server). Do we need an external script?

  Should be an external script, a drive letter may be assigned to this mount point, but it defeats the purpose of using start with a mount point

• How to recover missing the mounting point on the standby server

  Environment: Oracle 11.2.0.3 EE on Solaris

  
  

  I have a Production database with a physical standby created and run in our remote data center and this configuration worked well for several years.

  
  

  Recently, I had 2 two new mount points, added to the Production Server but unfortunately do not have their created on the standby server.  I did not remapped mounting points, so the layout is identical between the Production and standby.  At least it was.

  
  

  I created several new data files on the Production Server using the new mount points.

  
  

  Once I realized my mistake, I had additional mounting points created on the standby server.

  
  

  I STANDBY_FILE_MANAGEMENT = AUTO on the day before, but obviously the new data file was not created since mount points were not available when they were added in the Production.

  
  

  Without the mount points and therefore the new data files, on the eve, archive logs are not applied on the day before.  There are currently about 150 newspapers that must be applied.
  

  
  

  Question: Can I copy the files of existing data from the Production Server to the standby server and Data Guard will know which archives newspapers must be applied to standby data files to bring them current with the files of Production data?

  
  

  If this is not the case, how can I get the new data files created on the eve and a return to synchronization with the Production?

  
  

  Thanks a lot for your help!

  
  

  -gary

  Once the mount points are created on the eve, manually resume the managed recovery. The day before would have abandoned managed recovery so you don't have to make it work again. The transaction that has been reproduced that requires mount points should not proceed. Given enough time, the wait will catch up to where it should be. If it's not fast enough, then use RMAN to roll forward the day before as indicated in a previous answer.

  > Can I copy the existing data files on the Production Server to the standby server

  N ° you can not do this.

  See you soon,.
  Brian

• Is a brush "stylus" in preparation? I'd like to be able to mounting points on some things. I love the app, but I just want more. Please tell me that 'more' is in preparation.

  Is a brush "stylus" in preparation? I'd like to be able to mounting points on some things. I love the app, but I just want more. Please tell me that 'more' is in preparation.

  Hi Amy,

  I do not know. This is a feature requested for sure, but I have not heard whether she could make its way into Draw. I will certainly pass you your comments along to the team produced however.

  Sue.

• vCenter for protection SQL Server Heartbeat mount points

  Asking if anyone out there knows if vCenter Heartbeat (6.6) supports SQL Server installed on the mounting Points, this installation of HB is to protect the DB SQL vCenter.

  The file system has a provision when the directory of newspapers and directory bin ect are each on a mount point in the same volume of index (g) (for example diskpart: ASSIGN MOUNT G:\SQL55_BIN)

  I get this error when you start replication, and replication does not start.

  Automated Replication Stop Applied : Use of Invalid Reparse Point / Microsoft Mount Point has been detected for the file / directory : G:\SQL55_BIN
  As a result of this, VMware vCenter Server Heartbeat has been stopped with the protected applications left running.
  

  Have not been able to find this error on the googleplex and no reference to the doco on the mount points...

  I know that the end of his LIFE, but I'm not the decision maker and happy not to do.

  Clues?

  FYI,.

  mount points is not supported

• After Effects does not open error message citing "mount point list is empty.

  After Effects does not open error message citing "mount point list is empty.

  FAQ: Should what information I provide when you ask a question on this forum?

• Adding new point to existing path which is NOT on the path

  I need to add a new point to a path that is not on the way, that I am trying to add.  In other words, I am trying to extend a line in a given direction, do not add a new point in the middle of an existing line.  I created the path using the pen tool, then I've done something else with another tool and then returned on my road.  I add_ _can a new point using the pen to click somewhere on the existing path, but this isn't what I want.  I want to add a new point on the way to extend the line (I use STROKE with no fill to create a line) in a certain direction.  No combination of keys I've tried seems to allow After Effects insists on creating a new, separate, Lane which is not what I need.  Any help appreciated, thx!

  1. Select the layer with the open path
  2. Select the tool pen (keyboard shortcut g)
  3. You hover over the path the cursor turns into a small black arrow
  4. Click on the vertex at each end of your open path
  5. The cursor now changes behind the pen tool
  6. Click anywhere to add another point on the path

  The trick is to not having all vertices in the path selected when you start

• Mount point is often decreases

  Hello
  
  The database of the mountpoint in the following oracle E-Buiseness reduce two days once.
  I cross checked with the trace file, it generated normally & also I stored archives logs files in separate mount point.
  
  Nicely, someone guide me to this question.
  
  Thanks and greetings
  Mathilde

  Kesavan G wrote:
  Hello

  In the file that is often increased inside the ORACLE_HOME/appsutil/clone is jre_BAK_1368999014405 and it is a directory.

  Inside the jre_BAK_1368999014405 this directory files and subdirectories are:

  direcories are: bin, lib, man, javaws, plugin

  the files are: right of AUTHOR, LICENSE, README, THIRDPARTYLICENSEREADME.txt, www

  Every day at least four or five directories like jre_BAK_1368999014405 are generated.

  Each directory size is more or less 100 MB.

  kindly guide me.

  Concerning
  Guillas.

  The jre_BAK_ * can be removed without problems - which are Jre_BAK_ * directories used for? [1143395.1 ID]

  Thank you
  Hussein