Mouse / touchpad operation does not

Similar Questions

• Apple and Magic mouse/Touchpad keyboard does not not in CT

  I have an end 2013 27 "iMac connected to a MacMini via TB.  When I get the TOC, I can see the desktop of the Mini, but my keyboard and mouse/trackpad unresponsive.  I have not tried to connect a knockout and a separate mouse to the mini to see if they work... I wanted to see if there is a fix for this problem before doing so.  Thank you in advance!

  A Mac connected to an iMac in target Display Mode cannot use built-in camera computer iMac, its USB, FireWire or Thunderbolt ports or devices connected to these ports. To use external devices with your Mac, connect these devices directly on the Mac you want to use them with.

  Use your iMac as a display with the target - Apple Support Display Mode

• Satellite U50T-to-10F - keyboard and touchpad MOMENTUM does not

  I have a Toshiba Satellite U50T-A-10F, who did the usual round off the coast and was updated last night won't however when I turned it on the wheel mouse and keyboard does not work I managed to get hold of because the touch screen still works, but nobody knows why it would update then?

  Tried phone support but only open from Monday to Friday, I took out of warranty extended thanks to God!

  According to the bulletin of Toshiba technical support document, the touchpad can be disabled only and using the function keys it should be possible to activate the touch pad once more.
  Touchpad doesn't work anymore after upgrading Windows

• My Wireless Mobile Mouse 3500 driver does not allow me to control the scrolling of the wheel

  My Wireless Mobile Mouse 3500 driver does not allow me to control the scrolling of the wheel. When I scroll it will only pages and no option available for the adjuments to go through all the 3 lines or more. I thought that I had downloaded the wrong driver but the mouse did not bring a CD or another. Returned to download the specific driver and still can't get in there.

  Hello

  1 have you made changes to your computer recently?

  If the mouse works well, if a setting should be changed the mouse in the intellipoint software, you can contact the manufacturer of the device for more assistance.

  http://www.Microsoft.com/hardware/en-us/support

  For more information you can check the link below.

  Troubleshoot the incidents of the response to the mouse or wireless keyboard

  http://support.Microsoft.com/kb/838398

  Concerning

• Microsoft Wireless Desktop Keyboard/Mouse 6000 V2 does not work properly.

  Microsoft Wireless Desktop Keyboard/Mouse 6000 V2 does not work properly.  The mouse does not allow me to use the wheel to scroll down to option and when I look at the drop down list, it does not keep list open.  It opens and closes the list immediately. He continues to return the list to the top of the drop-down list.  I checked the batteries in the keyboard and the mouse (replaced) resync'ed the two keyboard and mouse ports changed the receiver performed in and checked for update on both keyboard and mouse and have restarted my computer several times and it still does not work properly. I bought this Office Microsoft Wireless Keyboard and mouse 6000 V2 there are three 3 months and he can't take back to store because it has a warranty of 30 days of the store.  Help.

  Try it on another machine to ensure that it is not the lack of equipment.

  And make sure you have the latest drivers/software installed for him.

  Restore point:

  http://www.howtogeek.com/HOWTO/Windows-Vista/using-Windows-Vista-system-restore/

  Do Safe Mode system restore, if it is impossible to do in Normal Mode.

  Try typing F8 at startup and in the list of Boot selections, select Mode safe using ARROW top to go there > and then press ENTER.

  Try a restore of the system once, to choose a Restore Point prior to your problem...

  Click Start > programs > Accessories > system tools > system restore > choose another time > next > etc.

  http://www.windowsvistauserguide.com/system_restore.htm

  Read the above for a very good graph shows how backward more than 5 days in the System Restore Points by checking the correct box.

  See you soon.

  Mick Murphy - Microsoft partner

• When I hover my mouse charms bar does not appear

  Original title: Windows 8 charms

  When I hover my mouse charms bar does not appear. I can also drag up and down to close an app and can't I click at the bottom left to find that my button tiles windows. All these work with the touch screen but I would like to sail with my mouse.

  All the boxes for navigation of corner in the laptop settings are checked as they should be.

  Any ideas?

  Open your app Store and install the updated Windows 8.1 to enable the functionality of the mouse.

• Brush control with CTRL + ALT + click right + mouse/pen movement does not work with the tool liquify (photoshop cc 2015): what should I do?

  Brush control with CTRL + ALT + click right + mouse/pen movement does not work with the tool of liquefy; I can't change the size of the brush or hardness. OS win 7 Professional 64 bit, wacom tablet intuos 6.3.14 - 1 driver s pro, Photoshop 2015 CC worm.  2015.0.1 20150722.r.168

  What are your settings of GPU acceleration?  As I understand it, the Alt right click size and hardness adjust needs acceleration GPU to be turned on, but I have a feeling Brush hardness is always set to easy when using fluidity.  You can still see the quick mask as representation of the soft brush when Alt right click, but you can't change the hardness.

  Is that you can change the brush size and pressure (framed in red in my screenshot) Alt right click drag left and right changes size and down to pressure changes, and you can see what is happening in real-time by looking at the sign on the right.  It works independently of your acceleration GPU (IME) settings, but you don't get the effect of soft red quick mask.

  

  Does this fit with what you see, or you are not able to change things at all?  If not, then I've always found that fluidity consumes system resources, if you could check the Task Manager > Performance tab to see what kind of RAM and CPU use is using the fluidity.  That's what I see after direction the lens above with a big brush continuously for 10 seconds.  Note This is on a fairly quick NLE System.

  

• My touchpad lock does not work, even if the orange light is on, indicating locked buffer. Probook4420s.

  My touchpad lock does not work, even if the orange light is on, indicating locked buffer. Probook4420s.  Windows 7 32 bit.

  Hello

  If the amber light is on the TouchPad itself, try double tapping

  If that is not activate, try uninstalling the device driver course Synaptics pointing, then restart the computer and download and install the driver from the link below.

  http://h20000.www2.hp.com/bizsupport/TechSupport/SoftwareDescription.jsp?lang=en&cc=us&prodTypeId=321957&prodSeriesId=4145435&prodNameId=4145436&swEnvOID=4052&swLang=13&mode=2&taskId=135&swItem=ob-86824-1

  Kind regards

  DP - K

• IN operator does not

  Hi all
  
  I cannot understand how an operator in works in the following cases
  
  I have 2 tables
  TBL
  ----------------
  coltwo (varchar2) colthree (number)
  ABCD/PQR 12345
  ABCD 13452
  PQR 12343
  MNO 12334
  
  Tbl_Main
  ----------------------
  m_col1 (Varchar2) m_col2 (Varchar2)
  A_B_C_D ABCD/PQR
  A1_B1_C1_D1 ABCD/PQR
  E_E_E EEE
  P_Q_R PQR
  
  Declare
  V_var varchar2 (100);
  V_Var2 varchar2 (100);
  Begin
  Select "' | REPLACE (coltwo, "/", "", "') |" ' in V_var from Tbl where colthree = 12345;
  Select coltwo in the Tbl V_var2 where colthree = 12345;
  dbms_output.put_line (V_var);
  dbms_output.put_line (V_var2);
  
  I'm in (select m_col1 IN the Tbl_main WHERE m_col2 IN (V_var) or m_col2 like '%' |) V_Var2 | » %' )
  Loop
  dbms_output.put_line (i.m_col1);
  End loop;
  
  End;
  
  
  Output of DBMS
  -------------------
  'ABCD', 'PQR '.
  ABCD/PQR
  P_Q_R
  
  where as it should be
  -------------------
  'ABCD', 'PQR '.
  ABCD/PQR
  A_B_C_D
  A1_B1_C1_D1
  P_Q_R
  
  
  Packages above should get all the lines of m_col1 of Tbl_Main that m_col2 such as ABCD, ABCD/PQR or PQR.
  but for some reason, I get rows of ABCD/PQR. I don't understand why the in operator does not work.
  It is not an error or a warning outside the above question, everything works fine... can you tell me where I'm wrong or why I get no results except
  
  Thanks
  Saami

  Hi, Sami,

  You set v_var to the string of 12 characters:

  'ABCD','PQR'
  

  The condition

  m_col2 IN (V_var)
  

  is never TRUE with this example data, because m_col2 is never this same string of 12 characters.

  In other words, you make the equivalent of

  m_col2 IN (Q'['ABCD','PQR']')
  

  When there is a 12 string in the IN list, not the equivalent of

  m_col2 IN ( Q'[ABCD]'
            , Q'[PQR]'
            )
  

  where there are 2 strings (one with 4 characters, the other 3 characters) in the IN list.
  Try changing:

  Select ''''||REPLACE( coltwo,'/', ''',''')||'''' into V_var from Tbl where colthree= 12345 ;
  

  TO

  SELECT  '/' || coltwo || '/'
  INTO     v_var
  FROM     tbl
  WHERE     colthree     = 12345;
  

  and also to change the condition

  WHERE m_col2 IN (V_var)
  

  TO

  WHERE   INSTR ( v_var
             , '/' || m_col2 || '/'
             )         > 0
  

  I hope that answers your question.
  If not, post a small example of data (CREATE TABLE and only relevant columns, INSERT statements) for all tables and also post the results desired from these data.
  Explain, using specific examples, how you get these results from these data.
  Always tell what version of Oracle you are using.

• Satellite A200 touchpad function does not properly

  Hello

  I spent a lot of time looking for the solution to my problem, but without effects.

  My touchpad does not work correctly. I mean, I can move the arrow and click on the screen, it's ok. But all other functions (volume, mailbox and other "virtual buttons" don't work)-the so-called "hybrid".
  I am connected to the USB port on the mouse.

  If I disconnect it, there is no change - the touchpad works only in basic mode.
  If I change the double mode in the settings of the touchpad to "always in Dual Mode when an external device is connected" - and all the virtual buttons work.
  But what do I do to make the mode of double the work even if the mouse is not connected (so that the power button works)?

  Thanks for any help,
  M.

  I m a bit confused now and I don t know what exactly you want
  You're talking about the touchpad, mouse USB, bi, etc..

  I put t know what you mean with dual mode and maybe you should give us more information about your operating system.
  And that you use the touch pad or mouse USB?

  Can you post a screenshot screen or something else?

  I put t know if this solves your problem, but have you tried to update the driver for the touchpad? You can find it on the Toshiba site.

• Satellite C660 - click Touchpad HR does not contain to save option

  Satellite C660 running Windows 7 64-bit OS.
  When you click on a photo / image, the HR click context does NOT contain "Save as background" option on the same desktop if Windows 7 training on your desktop change claim that it is how it's done.

  I ran XP previously and this option was always there,
  Any ideas how this can be remedied?

  And when you open some picture using Windows photo viewer is this option available with the right mouse click on?

  By the way: I use the same operating system on my laptop Satellite and this option is available.

• Touchpad/cursor does not

  I have a laptop of HP 2000; can't find the model numbers, or anything like that.

  My touchpad just in case works when I opened my laptop this morning. I am using an external mouse right now but need access to the touchpad. I already tried the following:

  Reboot 5 times

  Try the function keys

  Toggle switch: there is no light above the touch pad and double tapping does not any changes in light or function of the touchpad

  Reinstall the driver for the touchpad twice

  The research of properties of the mouse: lists not touchpad as a mouse device.

  Thanks in advance.

  Try a hard reset:

  Remove the AC and battery:

  Hold Power for 30 seconds

  reconnect the battery and AC and see if this brings back.

• Satellite L50 - after Win10 touchpad upgrade does not

  Brand-new Satellite L50-C03E laptop pad touch does not work. Upgrade to Windows 10. Tried using all combinations of F5, FN & F5, don't hit to swipe and checking settings and nothing works.

  I guess you can use external USB mouse.
  Connect it to the laptop and uninstall the old touchpad software / driver for Windows 10 system. You should find it in Control Panel → programs and features.

  After the the touchpad driver has been removed, restart the laptop and win 10 updates.

  It would be very interesting to know if this solution allows you to get the touchpad working again.

• Re: Satellite L500D - Touchpad 'touch' does not

  Hello world
  tactile function of my touchpad (to emulate left-clik by tapping the touchpad) not working anymore. I can move the mouse with the pad.

  Also under the pad left button does not work - the right is.
  I have already tried:

  -Update the driver
  -Fn + F9
  -The parameters of the touchpad - the 'touch' function is enabled
  -The material Toshiba - successful test

  but without success.

  You don't know whether a software issue or a hardware one.
  Any suggestions?

  I thank you,

  Andres

  Hello

  As far as I know the option is called tap to click
  You should check if it is enabled in the settings of the touchpad.

  > Also the under pad left button does not work - the right is.
  Perhaps it has something to do with the fact that the left click by tape does not work

  It is difficult to say what might cause this
  As I have said; options have to be checked once more in Control Panel-> mouse-> device-> settings (or properties) settings

  If all the settings would be ok, then a touchpad hardware problem would be possible

• Qosmio G30-163 mouse and keyboard does not work properly

  Hi all

  I installed an update of the firmware of the toshiba site. I think that the upgrade was for the dvd but am not sure. I just saw an available upgrade and installed. Stupid of me. The dvd drive has been previously not recording. If after installing the update of the firmware I has not restarted the machine. In the meantime, I forgot the upgrade and then I did to fix the error of dvd

  "Start the Registry Editor (start, run and type regedit and click on).

  Search for "UpperFilters" and "LowerFilters" (and "UpperFilters.bak" "LowerFilters.bak", if they exist) value under the following key in the registry and delete it:

  HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Contro l\Class\ {4D36E965-E325-11CE-BFC1-08002BE10318}

  Exit the registry editor.

  Reset. »

  Now, after restart the keyboard and the mouse does not work. I can't go in safe mode because I can't press ok for the user login screen. I have attached an external keyboard, but it still does not work.

  I use windows xp, I have a lot of data. I can't do anything. If anyone has any idea please help me. The laptop is out of warranty. I'm stuck. Help, please.

  John

  S rally strange because I put t see a link between the firmware CD/DVD, UpperFilters and LowerFilters and the keyboard and mouse.

  This is first time that a removal of the upper and lower filters would undermine the functionality of keyboard and mouse. Which is really strange.

  Anyway, you are able to access the BIOS? If this isn't the case, then this is not good.

  First of all, you should try to save the data stored on the HARD disk in this case, I recommend to remove the laptop HARD drive and connect it using a USB HDD on another controller.
  This would allow you to save the data to another HARD disk.

  Put the removed HARD disk in Notepad, and then try to reinstall the OS from the Toshiba restore CD.
  I hope that this will be possible because I don't see another way to get the operating system again.

  Good luck by a friend