Re: Satellite L500D - Touchpad 'touch' does not

Similar Questions

• Satellite A200 touchpad function does not properly

  Hello

  I spent a lot of time looking for the solution to my problem, but without effects.

  My touchpad does not work correctly. I mean, I can move the arrow and click on the screen, it's ok. But all other functions (volume, mailbox and other "virtual buttons" don't work)-the so-called "hybrid".
  I am connected to the USB port on the mouse.

  If I disconnect it, there is no change - the touchpad works only in basic mode.
  If I change the double mode in the settings of the touchpad to "always in Dual Mode when an external device is connected" - and all the virtual buttons work.
  But what do I do to make the mode of double the work even if the mouse is not connected (so that the power button works)?

  Thanks for any help,
  M.

  I m a bit confused now and I don t know what exactly you want
  You're talking about the touchpad, mouse USB, bi, etc..

  I put t know what you mean with dual mode and maybe you should give us more information about your operating system.
  And that you use the touch pad or mouse USB?

  Can you post a screenshot screen or something else?

  I put t know if this solves your problem, but have you tried to update the driver for the touchpad? You can find it on the Toshiba site.

• Satellite L500D-163 - Wireless does not

  Laptop: Toshiba Satellite L500D-163 (with card wireless 802.11 b/g/n)
  Router: Pirelli Discus (having support 802.11 b/g).

  Hello

  I bought a portable Toshiba, Satellite L500D-163, two days ago.

  Windows 7 and Ubuntu Linux 10.04, the Wireless does not work. It shows all the available wireless network neighborhood, including mine, but it connects to my network.

  I also have an Acer laptop that connects to my network wireless without problem.

  I placed the Toshiba laptop side by side with my Acer laptop and tried all the options:
  802 11b, 802.11 g - WEP, WPA, WPA2
  with simple passwords of the style: "00000000".

  and SSID wireless to the router changed something as simple as "abcde".
  Computer Acer laptop connected without problem in all cases, but Toshiba didn't connect.

  In Windows 7, the connection information appears as connected but 'Limited' and the software Toshiba says that the laptop is not getting an IP address.

  I manually entered the IP address (192.168.1.2), subnet mask (255.255.255.0) and the default gateway (192.168.1.1 router =) below the configuration in Windows 7 wireless card, but it did not work.

  The laptop must support Toshiba, or y at - it an incompatibility with my router?

  Thank you.

  Great! Thanks for that!

• Re: Problem of recovery with Satellite L500D - 16 M: does not load Win7

  I recently put the recovery disk in my Satellite L500D - 16 M laptop to factory settings.
  It restarts without problem until it gets to the windows page 7 and prepare to start first use but it keeps looping back and restart.

  What can I do?

  AFAIK you can't do much.
  Try again and let us know if the same problem occurs again.

• On Satellite L500D DVD player does not work - Code 39

  my dvd driver does not work it says driver may be corrupted or missing (code 39) I got it 3 days new

  read here:

  http://APS2.toshiba-tro.de/KB0/TSB7801XL0000R01.htm

• Satellite L500D - integrated webcam does not work properly

  Hello world

  I have a L500D (I got it for about 2 months now) and yesterday I realized that my webcam did not work properly even if it worked just fine a couple of days.

  Here's the problem: when I turn it on (via Skype or through application of camera web toshiba), the colors are reversed: it's exactly like I had added an effect on the image as 'Posterize' or 'threshold '. Everything is bright, grainy, saturated...

  I tried in low light and high, and the night mode is not on.
  I couldn't solve the problem with the webcam settings, but regardless, I, can not do anywhere near a normal image.

  I spent a lot of time surfing the web but couldn't find a solution (or someone with a similar problem, in fact). I have windows 7 64 bit.

  Any help would be greatly appreciated. I run my laptop with a lot of care, which makes even more beat when something goes wrong... Thanks in advance!

  Jminiz

  Hi mate

  Didn t find such a problem described discussions, it seems that you are the first person who has reported this

  Have you tried to reinstall the webcam software?
  Try this.
  First remove the software of webcam and then after new reboot, install the new downloaded webcam software.

  PS; have you removed the thin sheet secure the lens of the webcam?
  Check it!

• Satellite L50 - after Win10 touchpad upgrade does not

  Brand-new Satellite L50-C03E laptop pad touch does not work. Upgrade to Windows 10. Tried using all combinations of F5, FN & F5, don't hit to swipe and checking settings and nothing works.

  I guess you can use external USB mouse.
  Connect it to the laptop and uninstall the old touchpad software / driver for Windows 10 system. You should find it in Control Panel → programs and features.

  After the the touchpad driver has been removed, restart the laptop and win 10 updates.

  It would be very interesting to know if this solution allows you to get the touchpad working again.

• Satellite A300 - easy (key) does not not after SP2 update

  Satellite A300 easy (key) does not...
  I have recently upgraded my Vista SP1 to SP2 (do not know if this is the problem, but I'm pretty sure that's not)

  Yesterday, I discovered that my easy keys no longer work. Lights are out, when I press the keys, the light comes on and goes off again as they do normally, but no reaction on my screen (can not turn on any light without restarting my computer and select turned ON manually cannot transform media of windows opened by the touch and play the key do not work).

  Is it supposed to be a driver or something for this?

  Sorry for the bad English...

  Hello!

  A few days ago, I had the same problem on my laptop Qosmio. Lighting keys stopped working after installing some updates and the 3rd application programs the keys no longer works and also the lighting.
  At the end of the story, I had to reinstall Windows :(

  In any case, now, you should try to reinstall the Toshiba value added Package. He controls these buttons that you want to say and you can find it on the Toshiba site:
  http://EU.computers.Toshiba-Europe.com-online decision-making supported Downloads & => Download drivers

  Before installing you need to remove the old version first, restart the computer, clean up your Windows with CCleaner for example, restart again and then install the new VAP.

  Good bye

• New Ipod Touch does not illuminate

  Buy IPod Touch last summer (August 2015) and died this morning. Can not activate it or it will load. Any suggestions?

  Try the following steps:

  1. Press and hold the home and power buttons at the same time for at least 15 seconds until you see the Apple Logo.
  2. If this does not work, load your iPod for at least 10 minutes, or until the Apple logo appears.
  3. If none of the steps above do not work, here is a link to give you more information: If your iPod touch does not illuminate
  4. Be sure to contact the Apple support if you need more help.

  Good luck!

• iPod touch does not present as associated device

  My iPod 5th generation touch does not appear on my list of device associated with my Apple account.  How I "associate"?

  Just where are you looking?

  You use the same ID and the device uses one of these characteristics?

  On the devices associated with

  When you use some features of the iTunes Store on your iPhone, iPad, iPod touch, or computer, your computer or iOS device is automatically associated to your Apple ID in iTunes account settings. These features include:

  • Turn on iCloud music library.
  • Download after purchase , you did in the iTunes Store, App Store, iBooks Store or Mac App Store.
  • Enabling automatic downloads.
  • Turn on sharing of family.
  • Subscribe to iTunes game.

  View and delete devices in iTunes - Apple Support

• Satellite C650 - 1 CT does not recognize the CD/DVD

  Hello

  I currently have a problem with my model Toshiba C650 - 1 CT (PSC08E-03M001EN) satellite. The laptop does not recognize the CD/DVD and a check in the "Device Manager", said a damaged device driver!

  Now, my problem is that I searched on the internet and also on the websites of Toshiba for the right driver, but no use. The device (DVD) opctical no not also appears in the list of devices 'removable '.

  System details:

  Satellite C650-1 CT PSC08E-03M001EN
  OS: Windows 7 64-bit
  Place/country: United Kingdom

  Assistance in finding the right driver or advice how to solve the problem will be highly appreciated.

  Thank you
  Lamin

  Post edited by: jammehkunda

  As first step try please remove the optical disc drive from Device Manager and restart your laptop.
  After doing this review please the Device Manager and let us know if the problem persists.

• After updating my iPhone to ios 9.3 iPhone touch does not

  HI guys! I'm too frustrated by the question. I'm updating my iOS to 9.3 (Build 13E233) on my 6-64 GB iPhone (model A-1586) and now I can't even use 10% of my phone. My touch screen works not even taping 100 times but if I press the lock and unlock my phone, my touch screen works very well for a few seconds then freezes while on the other hand all other keys work well while the touch is blocked (for example, Home, Power, Volume buttons) and I know my phone is not stuck but only touch does not. I'm too worried because I can't use my phone even for one moment what to do any help? Any help will be appreciated sorry for my bad English. Following that I

  Try resetting your device. This will not erase your data stored on that device.

  • Press and hold the sleep/wake button
  • Press and hold the Home button
  • Press and hold both buttons until the display turns off and on again with the Apple logo on the subject.

  Alternatively, you can go to settings - general - reset - Reset all settings

  If that doesn't work, restore your device to factory settings. Please note that this will delete the data on your device.

  Take a look this Apple Support article: use iTunes to restore the iPhone, iPad or iPod to factory settings - Apple Support.

  As a final step, try recovery mode. Turn off your unit, then plug it to your computer with the hold home button. Hold down Home button until you see the logo of iTunes on the screen of your device. After that on your computer, you should see the iTunes window saying that your device needs to be restored to factory settings. Click Restore.

  More info here:

  https://support.Apple.com/en-us/HT201263

  If these steps do not work, contact Apple and ask for help.

  https://www.Apple.com/support/iPhone/contact/

• Satellite C - DVD tray does not open properly

  My Satellite C DVD tray does not open properly. It opens only after several times.

  Can someone help to solve the problem?

  Thank you very much
  Dalug22

  Please check this thread:
  https://Forum.Toshiba.EU/showthread.php?82344

  The ODD (optical disc) contains a small ejection hole. You can insert an object like a paper clip to open the ODD plateau

• Satellite A10 S203: sound does not work - just enough

  Hello!

  To my satellite A10 S203 sound does not work, I updated my sound card and the bios but nodifferents. Nothing in the system that says that I have something wrong whith my sound is just enough. I tried speakers headphones and challenging systemsounds, mp3, Auidi direct works cd... nothing.

  Any tip?
  [email protected]

  First check the status of the sound card in Device Manager.
  If there is a yellow climbing brand then you should try to reinstall the driver. (first remove it and after reboot, install a new)

  Have you checked the volume setting and the site of laptop? Eventually he s a very simple idea, but believe me, I read many comments here in the forum and a lot of guys forget this option simply.

• Link to BIOS 1.50 for Satellite C660D-13 q does not (404 error)

  Hello

  Link to 1.50 BIOS for Toshiba Satellite C660D-13 q does not (error 404) - file not found.
  How can I get this file after all?

  Who should I contact for this?
  Any help email address?

  Thank you

  You are right. the link says 404 error.
  To be honest, it is not for the first time something like this happens, but after a few days, everything was OK again.

  Try to download this update in a few days. I hope it will be fixed.

  By the way: you have a few problems installing the BIOS update should be made as soon as POSSIBLE?