Mouse Wireless moving erratically and freezing

Similar Questions

• Re: Mouse cursor moving erratically and even moves its own

  Hello. I hope you can help.

  I have a Toshiba Satellite U500, less than a year and I have real problems with mouse cursor move where he wants, when he wants, even when my hands are away from the laptop. I ran every virus/trojan/software malware scan and there is no problem. Tapping is disabled and sensity etc. levels are low. I use Windows 7 and there is no problems until the last two days (apart from an occasional hour or two the same thing a few months ago.

  Oh and I don't have an external mouse. only the Toshiba integrated one. Any ideas? He made work very difficult.

  Thank you very much.

  Hello

  try updating the driver for the touchpad:

  http://EU.computers.Toshiba-Europe.com/innovation/download_drivers_bios.jsp

  To be honest, I do not know what you suggest again that you have already scanned for viruses, disabled tapping, sensity levels. As it is the last hope to reinstall the operating system itself with a recovery disk

• New Magic Mouse (wireless) works erratically

  New Magic Mouse (wireless) said low battery but it does not use a battery? How to charge it?

  The Apple article below should help.

  Recharge the battery in your Apple - Apple Support accessory

• My Apple Magic Mouse 2 is erratic, its moving very slowly or not at all.

  My Magic Mouse 2 is erratic, it sometimes does not move or moves very slowly.  I tried to log on to Apple Support without success as accessories do not seem to be supported.  Does anyone have a suggestion?  I have changed the speed of follow-up, recharging the mouse via bluetooth, rebooted, not everything works.  Scrolling works fine, but when I move the mouse it move step or move slowly.  I use a pad, just to make sure this isn't a surface issue.

  I'm curious to know if your problem persists on the mouse pad? I also use a mouse pad. Mine is a black steelseries all mats. I bought it when I bought my MM2 nearly two months. Before this week, I had when the mouse pointer is frozen on the screen or moved very slowly for a period of time. The problem solved always himself, after a brief period. Starting this week I twice when the pointer is locked horizontally. He moves laterally, but not vertically. I moved it out of the mouse pad, and it worked perfectly. Back on the shelf, it is still stuck horizontally. By turning the MM2/turn off had no effect. I rebooted and everything worked again. Spend a day or two, and it does again. I was not in a place to do a restart and continued to work on the mouse pad. After a few moments I am back on the mouse pad and it works again. It has been working fine since then. I have reviewed the MM2 lens, but it seems normal. He had been recently charged then the power should not be a problem. With the exception of those troubles it works much better that my original Messrs. Pour memory, I use a Mac mini (end 2012) OS X 10.11.2 with updates that have been offered. I did a general search of this issue and your description seems close, I could find to issue messages so far.

• After you have installed windows 10, I can't use apple wireless key board and mouse magic. any solution

  I am facing a strange situation. I used Win7 on BootCamp. Last week attempted to upgrade to Win10. After the upgrade is perfect, I could not connect to the wifi or wired internet. called the Apple support, Windows supports, no one would help you. Downgraded to Win7, after decommissioning, apple wireless key board and mouse magic does not work. Called Apple support, after nearly 90 minutes of interaction with them, ZERO, no solution result. Apple support told me that an Apple engineer will call me at my appointed time. A call came, but no one answered.

  So, today did a clean install of Win10 through BootCamp. All right, BUT I still can't use apple wireless key board and mouse magic. Can someone help me with this situation? Apple & Microsoft support engineers have failed to help out me. Thanks in advance.

  Have you installed the Boot Camp Windows Support software?

  If you do not see some Mac functionality if you are using Windows on your Mac - Apple Support

• Windows xp agreeing not to receiver of keyboard and mouse wireless

  My system is reconizing not the receiver Wireless USB ports so my keyboard and mouse works. Download Logitech but when trying to activate it tells me "wireless receiver not found" as if I have not installed in a USB port (I tried all). I know that the system has worked because I don't set up on my roommates computer no problem (it has windows vista). My service pk 3 is installed, I checked and I too am set up for automatic updates when they occur.  I had a mouse wireless and wired keyboard, but I just bought this new Logitech MK320 keyboard and mouse configuration.  Logitech said problem comes from microsoft.  Any ideas?

  Hello

  I wish that you follow the steps in this article and check if that helps.
  Troubleshoot the incidents of the response to the mouse or wireless keyboard

• Paved tactile and G550 keyboard do not work when I remove KB and mouse wireless

  I have a G550, which works very well. I bought a keyboard and wireless Microsoft mouse and they work very well also. Recently I had to take the laptop on the road and I didn't take the big KB wireless. But if I take the little thing USB wireless, the keyboard and the touchpad on laptop NOT WORKING. How can I solve this problem? Thank you very much!

  PS: This laptop is a bargain! I bought new from Office Depot last year during a promotion of the tour-of-your-old-mobile and paid about $ 400 for it. I've also upgraded to professional Windows thanks to a college. I am extremely pleased with this machine and can't believe that I got it for a price as low.

  Hey johannfu,

  When you have connected wireless keyboard, was the keyboard and the touchpad works on the G550?

  otherwise and only the Wireless Microsoft keyboard worked, then it is a strong possibility that the pilots who came from the crushed wireless keyboard drivers for your G550 keyboard and touchpad.

• How to install logitec mouse wireless receiver and the software driver CD?

  How to install logitec mouse wireless receiver and the software driver CD?

  http://www.Logitech.com/index.cfm/support_downloads/&CL=us, fr.

  There is a link on the site above to contact Support Logitech technique.

  See you soon. Mick Murphy - Microsoft partner

• Connect the keyboard and mouse wireless with new transmitter/receiver

  Hello.

  I have a keyboard and wireless Microsoft mouse 2000 but the transceiver does not seem to work.

  I also have another transmitter/receiver (same model) which belongs to Microsoft Wireless Keyboard and Mouse 5000, so my question is:

  is there a way to use the wireless 2000 with this new transceiver box? How can I change the transceiver settings so that it finds the keyboard and mouse?

  Thanks in advance

  You can not.

  The receiver is synchronized with the keyboard and the mouse in the factory and cannot be re paired at the level of the Office

• What is the difference between the 2000AES of Microsoft, and most expensive, 2000 Microsoft Wireless Desktop keyboard and mouse?

  What is the difference between the 2000AES of Microsoft, and most expensive, 2000 Microsoft Wireless Desktop keyboard and mouse?

  Made me. Comparing the two references, it seems that they are both the same, except that one is titled 'for business' and the other is not. The cheapest is "for companies' then perhaps originally they were to be sold in lots of dealers XX amount. If you plan to do one, get the cheaper. like you, I see no difference:

  http://www.Microsoft.com/hardware/en-GB/b/Wireless-Desktop-2000-for-business/P7K-00006#overview>

  http://www.Microsoft.com/hardware/en-GB/p/Wireless-Desktop-2000/M7J-00020#overview>

  SC Tom

• How to change the mouse keyboard and mouse wireless in one click?

  Original title: How can I change the mouse to a single click? more it is difficult for an older person with arthritis.

  I would change the mouse keyboard and mouse wireless in one click. I have windows7. with windows xp, it was part of the accessibility options, but I can't find this option now. Any help would be appreciated. Thank you

  Hi knufyn,

  I certainly understand your concern and I will be happy to provide the steps to check if we can change the settings click on the mouse.

  Let us, perform the following steps and check if you are able to change mouse click settings.

  By default, the mouse is configured to use the double-click to open an item (single click to select) in Windows 7. To configure the mouse to use the single-click to open an item (point to select) setting, follow these steps

  un) Click Start

  (b) type appearance and personalization in the start search box, and then click appearance and personalization in the list programs.

  Note: If you are prompted for an administrator password or a confirmation, type the password, or click on allow.

  c) in appearance and personalization, click on Folder Options.

  d) in the general tab, click single-click to open an item (point to point)

  (e) click apply and click OK.

  It will be useful. For any other corresponding Windows help, do not hesitate to contact us and we will be happy to help you.

• My wireless mouse just stopped working. I can still use the mousepad however. I changed the batteries does not. Then I tried another mouse wireless, and it didn't work either.

  My wireless mouse just stopped working.  I can still use the mousepad however.  I changed the batteries does not.  Then I tried another mouse wireless, and it didn't work either.  What can I do next?

  Buy an inexpensive wired USB mouse for less than $5 and see if it works.  As far as I'm concerned wireless mice are more trouble than they are worth.  YMMV :-)

  Good luck.

• After the passage of the user by using the Fast, my mouse Wireless USB and USB switch wired stop keyboard work or sponsor.

  After having used the username switch function under 'Sign Out' in Windows 8, my Microsoft Sidewinder X 4 USB wired keyboard and mouse wireless Logitech M235 times stop work and answer, making me unable to type a password for the new user account, or use the onscreen keyboard. I also can't click the restart because of this problem, which means I have to press the power button on my case.

  I use the USB 3.0 for a USB 2.0 for the keyboard and the mouse.

  Also, when you use a Gigabyte Force M9 Laser wireless mouse, the cursor is dragging and sometimes not answer I'm browsing the Internet Explorer, play League of Legends or using Microsoft Office. In my view, that is not a driver problem I have uninstalled and reinstalled the driver for the mouse and the keyboard several times in trying to solve this problem.

  This is probably not the best forum to ask for this help.

  I'm looking for a similar problem on a new Office Z97 based solutions.

  My problem is that the profiles of Logitech keyboard and mouse in the software of Logitech are cancelled after a change of user.  Although the keyboard and mouse to their default settings still work.

  Workaround solutions...

  Log on to the account, and sign in again instead of fast user switching.

  Quit and restart the Logitech gaming software... This restarts the profile defined by the user.

• Mouse Wireless 5000 stop moving

  He suddenly move slider stop. Windows 8, 64 bit, office. Blue led work. Work of the transceiver.

  Hello

  Have you tried restarting the computer?

  Check the batteries.

  You have the latest drivers installed?

  Wireless Mouse 5000 - Support, software and warranty
  http://www.Microsoft.com/hardware/en-us/p/wireless-mouse-5000/mgc-00001#support

  Product Solution Center
  http://support.Microsoft.com/hardware

  Hardware support
  http://www.Microsoft.com/hardware/en-us/support

  If the mouse is still under warranty:

  Hardware support of MS and warranty claims
  Tech Support 1-800-936-5700 for MS material or call: 1-800-Microsoft (642-7676)

  I hope this helps.

  Rob Brown - Microsoft MVP<- profile="" -="" windows="" expert="" -="" consumer="" :="" bicycle=""><- mark="" twain="" said="" it="">

• My Lightroom has lost the connection to most of my photos, records and collections. They are still on the computer. It happened, while moving my laptop when it was running. The mouse is moved and it might have changed the configuration. How can I do my wo

  My Lightroom has lost the connection to most of my photos, records and collections. They are still on the computer. It happened, while moving my laptop when it was running. The mouse is moved and it might have changed the configuration. How can I make my Lightroom works properly again?

  I use Lightroom 6.4 on a Pc with Windows 10.

  Has disappeared? Try file-> open the new item, and then select each illustrated catalog until you find the catalog with your photos.

  If this does not work, please post a screenshot of the problem.