Mouse without borders is not communicating between computers

Similar Questions

• mouse without borders do not transition to the keyboard during the passage of virtualbox for machine B

  Hello

  I have the following Setup.
  Win7 computer has
  Accommodation Virtualbox Ubuntu 12.04LTS
  Win7 machine B
  Whenever I go to Virtualbox directly to Machine B, the mouse works without any problem, but the keyboard does not transition.
  If I tap the keyboard typing rest on the Virtualbox VM commands.
  The only way to transfer is as follows.
  VM VirtualBox, mouse slide for Machine A Win7 box, click on and then go to the B machine where you will now be able to type (keyboard finally transitions).
  Note that I have observed the same behavior with other virtual machines, such as Mint and CentOS. So I don't think it's a problem related to the virtual machine.
  Finally, I used synergy before and it doesn't have the same problem. There are a few advantages to mouse without borders that is why I would use it.
  Please advise,
  Thank you
  VVhelp

  Found a solution: simply disable "Auto Capture keyboard" in the global preferences of VirtualBox.

• How to install mouse without borders

  Downloaded mouse without borders but unable to link my computers. Ask for a security code. Where can I find out who.

  Unofficial community-powered support for mouse without borders

  John

• Using the mouse without borders Win8 gestures

  Mouse without borders works very well. Install and use not unlike the plug-and-play. It is: using a LogitechT650 with drivers installed on each computer. Only the host computer (where Logitech dongle is plugged) will allow for the construction in the gestures of Win8. When I go to a nearby computer with the cursor gestures don't work. If I plug the USB to the computer (making the host), now is one that allows gestures, but not the surrounding computers. Is that what "the way that it is? Four ASUS K75D.

  Hello

  See if this helps:

  http://blogs.technet.com/b/next/archive/2011/09/09/Microsoft-garage-download-mouse-without-borders.aspx#.U3J-wLvQeUk

  Fixing of the mice without the inconvenience of the borders

  http://www.gHacks.NET/2012/07/16/fixing-mouse-without-borders-annoyances/

  Synergy

  http://synergy-project.org/?welcome

• Mouse without borders lose laybout simetimes keyboard? How to prevent this?

  Using the mouse without boundaries between my workstation (Windows 7 64) and my laptop (Windows XP). Sometimes I seem to lose the keyboard layout when moving to the computer remote (laptop). I still put on correct page if I use the local keypad but through the mouse without borders, the layout is messed up and it is very annoying. Someone else who has the same problem or have a solution?

  Hi Humpe75,

  ·         Is - it always was a problem?

  ·         Did you do changes on the computer before the show?

  I suggest go to the link below and check out the blog for this product.

  Mouse without borders

  http://social.Microsoft.com/forums/en-us/offtopic/thread/30bf6983-0bfd-448f-9ACD-c3f36a9e471c/

  Let us know if that helps.

• mouse without border. Ask for a security code. where can I find

  I installed mouse without border. Ask for a security code. where can I find

  Help, please

  Hi Keyna,

  Thanks for posting your query in Microsoft Community.

  I understand that after I installed the mouse without borders to ask his security code.

  1. What is the brand and model of your computer?

  Please visit the links.

  http://blogs.technet.com/b/next/archive/2011/09/09/Microsoft-garage-download-mouse-without-borders.aspx

  http://www.Microsoft.com/en-US/Download/details.aspx?ID=35460

  Please do not hesitate to contact us if you need additional assistance. We would be happy to help you.

• communication between the printer and the computer stops

  Original title: printer problem

  Without rhyme or reason communication between our computer and the printer just stops (often!)   Why?  and how to fix it?

  Hello

  ·                         try to uninstall and reinstall and use the latest printer drivers VISTA for your model of the manufacturer of the printer

  You can also track information to try to solve your problems of printer below

  read the printer correct that information the slot microsoft, including the 'fix - it' and the information of the links to the other

  Solve printer problems

  http://Windows.Microsoft.com/en-us/Windows-Vista/troubleshoot-printer-problems

  and read this microsoft tutorial too

  Introduction

  This tutorial is designed to help you identify and fix the problem printer common windows problems, including print errors, or errors, and other issues that could prevent you from printing. This tutorial does not cover printing problems related to specific programs. Printing problems can be caused by cables that are not properly connected, corrupt, drivers, incompatible drivers, the printer settings, missing updates and problems with your printer.

  How to use this tutorial

  For best results, complete each step before move you on to the next. Try to print after each step before moving on to the next step.

  http://Windows.Microsoft.com/en-us/Windows/help/printer-problems-in-Windows

• The task manager has started to appear without borders and will not go away, unless the computer is off.

  When using the Ctrl-alt-delete option and the Manager tasks appears it seems without borders.  The task manager remains after the programs are all closed and will not go away, unless the computer is off.

  It's called mode 'small footprint '.  Double-click anywhere on the border of the Task Manager window and you will get the Menu bar in the rear.

• New router. Connection to the remote NAS device or a file between computers does not.

  I just changed routers and lost my connection wirelessly between devices. Internet is good, but no connection with Lynksys NAS 200 wireless backup. And I can't share files between computers. All my permissions are large open on both computers, but same homegroup does not. Windows 7 on both computers. A desktop connected to the network and a wireless laptop which is connected to the NAS. My wired desktop backup is fine. NA not lose that connection.

  I just changed routers and lost my connection wirelessly between devices. Internet is good, but no connection with Lynksys NAS 200 wireless backup. And I can't share files between computers. All my permissions are large open on both computers, but same homegroup does not. Windows 7 on both computers. A desktop connected to the network and a wireless laptop which is connected to the NAS. My wired desktop backup is fine. NA not lose that connection.

  Me too, I unfortunately have the same problem.

  Installed a replacement wifi router and lost access to a NAS. And it is the only element that would not be re - connect...

  It's the config probably simple setting of the wireless router with the IP Address of the NAS (10.1.10.199 if this is of any help), but it's clearly a mystery to find useful info on how and what to configure...

  Unfortunately, it was easier under XP...

  Thanks for the research.

• Calendar application does not correctly synchronize between computers

  For several days, my calendar application (part of Mail, calendar & people) was not properly synchronize between computers.  If I run the application modern calendar on my Dell laptop to update Pro Windows 8.1, at a meeting of current calendar, it seems that I can make entries but after reboot the same computer or on another computer, the entries are lost.

  I thought that the answer might be that I need to uninstall and reinstall the app Mail, calendar & people.  But when I do, I meet the download of Windows Store pending problem that never ends and you try to run the troubleshooter Windows Update store still hangs on the re-registration of the Windows store.  None of the fixes suggested in the thread on the subject works for me:

  http://answers.Microsoft.com/en-us/Windows/Forum/windows_8-windows_store/Windows-8-apps-are-pending-and-never-download-from/d859c093-ee94-4581-9bdf-95e35f0c9e0c

  I am answering my own question as I've found running a registry cleaner on the affected computer registry errors found especially for Windows Store.  After the repair of the registry, Windows Store downloads work properly and I am unable to reinstall the Mail application, calendar, & people and it now correctly syncs between computers.  The registry cleaner that I happened to use that figure in the Norton Utilities 16 but I guess any other good registry cleaners might work as well.  Utility for troubleshooting Microsoft Windows Update store never work properly and that's it for me.  He would always hang on the re-registration of the Windows store.

  Microsoft must make its app Store Windows more reliable than to make a crucial Central application for Windows 8 (the application Mail, calendar & people) more robust and more functional.  I used the software to Microsoft for more than 32 years, but repeated like this with Windows 8 experiences are very encouraging.

• I am not able to print a picture without borders 13 x 19.

  I am not able to print a picture without borders 13 x 19. I use a mac and Lightroom 5.7 my printer dialog box is set to none under borders. I chose the tray sheet without borders in layout. I have the zoom to fill the box ticked. I put my margins to 0.00. The area of cell size it only allow me to put a border height of 12.95. Width is fine at 19. Is there something that I missed? THX

  Printer Page Setup dialog, check the Expansion.  Move the slider to the Max, if it is not already there.

  

• [INS-06006] Connectivity SSH without password do not put in place between the following nodes.

  Hello

  I'm currently building the cluster by RAC 11 GR 2. I try to install Oracle Grid Infrastructure Oracle Linux 6.4 (x86_64bit) machine - node1.abc.com.

  I'm at the stage of the "Cluster Node Information" where I have to provide me with the list of nodes to be managed by the Oracle grid Infrastructure. Currently I have added just me - node1.abc.com with the name of the virtual IP address - node1 - vip.abc.com. The two host name and virtual IP addresses are registered on the DNS server - it is also installed on node 1. Before adding the second node2.abc.com, I was testing SSH connection but it fails. I clicked the [SSH_Connectivity...] button and in the OS Username (grid) and his password. When I press the [Setup] button, it pops up message successful "Able to establish connectivity SSH without password between selected nodes." But when I click on the [Test] button or the [next] button, I get error - ' connectivity [INS-06006] SSH without password, do not put in place between the following nodes: [node 1].» What is the problem and what exactly to do to avoid this error?

  
  

  Thank you
  

  It was because I assigned a real static IP address for the second NIC eth1. With this affected YES wouldn't let you go to the next screen. So I had to remove NIC out of my laptop. But if eth1 is not resolved by the DNS name it also gives you errors. So I guess a correct functioning is I would sign up eth0 and eth1 to the DNS server but eth1 does not have real IP. Then I could go to the next screen.

• Does not display the computers on the home network.

  Original title: where's the rest of my network?

  All of a sudden, two other computers on my home network are invisible.  I ran the troubleshooter in Windows 7 and it says that Windows Firewall blocks other machines on the network, but it cannot solve the problem anyone knows how to solve this?  Thank you.

  Salvation Watha,

  Please contact Microsoft Community.

  It would be great if you can answer the following questions:

  1 have had any changes made on the computer before the show?

  2. What is the full and exact error message?

  Follow these methods to solve the problem:

  Method 1:

  First of all, I suggest you to refer to the article and see if it helps:

  Why can I not see other computers on my network?

  http://Windows.Microsoft.com/en-us/Windows7/why-can-t-I-see-other-computers-on-my-network

  Method 2:

  Check the link and see if it helps:

  Identify and resolve home network problems

  http://Windows.Microsoft.com/en-us/Windows7/identify-and-resolve-home-network-problems

  Method 3:

  I suggest you temporarily disable the Windows Firewall and check if it helps:

  Enable or disable Windows Firewall

  http://Windows.Microsoft.com/en-us/Windows7/turn-Windows-Firewall-on-or-off

  Note: run the computer without antivirus software or firewall is a potential threat to the computer; Be sure to activate security software after completing the troubleshooting steps and after identifying the problem.

  I hope this helps. If you have additional questions on the computer, please ask your question about Windows and we will be happy to help you.

• Communication between TNS_Listener and the listener of the Apex

  Hi all
  I how communication between TNS Listener, receiver of the Apex and Apex? For some reason, I got the following error of Apex listener:

  Caused by: oracle.dbtools.rt.web.WebException: Unable to start the Universal Connection Pool: oracle.ucp.UniversalConnectionPoolException: Cannot get Connection from Datasource
  .
  .
  .
  Caused by: oracle.net.ns.NetException: Listener refused the connection with the following error:
  ORA-12505, TNS:listener does not currently know of SID given in connect descriptor

  I truncated messages Java object.
  
  This has happened when I tried to connect to the Apex. So I can fix it by going to:

  http://localhost:8080/apex/listenerConfigure

  then everything worked fine.
  
  My listener.ora file:

  LISTENER =
    (DESCRIPTION_LIST =
      (DESCRIPTION =
        (ADDRESS = (PROTOCOL = IPC)(KEY = EXTPROC1521))
      )
      (DESCRIPTION =
        (ADDRESS = (PROTOCOL = TCP)(HOST = firefly.snowdrop.com)(PORT = 1521))
      )
    )
  
  ADR_BASE_LISTENER = /usr/local/oracle
  
  ADR_BASE_ORACLE_LISTENER = /usr/local/oracle

  My tnsnames.ora file

  INARA =
    (DESCRIPTION =
      (ADDRESS = (PROTOCOL = TCP)(HOST = firefly.snowdrop.com)(PORT = 1521))
      (CONNECT_DATA =
        (SERVER = DEDICATED)
        (SERVICE_NAME = inara.snowdrop.com)
     )
    )

  When inara is the name of the instance and the firefly is the host name.
  
  Is that the order of start if first the TNS Listener or listener Apex matter first?
  
  Best regards
  Val
  
  Published by: Valerie good-natured August 1, 2011 05:47

  Hi Val,

  My tnsnames.ora is configured for an existing server and there is no client configurations like sqlplus, sql or earpiece of the apex developer. However until now the server can connect to customers without problem (I just discover that unreproducible error on 'impossible to find the SID' sometimes occurs at the beginning of the Summit, the kick-off and can be solved by waiting for a while to connect to reconnect), so again I must modify the .ora?

  No, if your database listener is configured properly (i.e., he listens to the SID that you try to connect to the network interface/hostname/ip address /... she must use), there is no need to make any other configuration, especially not on another machine.

  -Udo

• How to get the Pages to print postcards correspondence without borders/maps?

  I have Pages 5.6.2 and I'm unable to print postcards correspondence without borders/cards. I have the margins are set to 0 and each adjustment in the format I can think.  What I'm missing!  Is there a simple fix or is this not possible?  (I was able to do this in Publisher before moving on to my Macbook Pro - so I know this isn't my printer).  I'm extremely frustrated - thanks for your help.

  Did you install the latest printer driver for your printer and selected in your printer dialog?

  Postcards and cards being generally smaller than the usual printed sheet, they are usually implemented in multiple on a page, so what you print on and how they are arranged on the page?

  Peter