Move a file causes it to back up?

Similar Questions

• Re Edit a movie maker file causes video green screen

  When you save a file of film edited with windows live movie maker record in wmv format that plays very well. Then when I want to re - edit this file and make a short clip and re - save this file, the sound is played, but the video shows just like a green screen Uni. Looks like a bug in the program!

  Hello

  I would suggest your question about Windows Live movie maker in windows Live help forums.

  Here is the link: http://www.windowslivehelp.com/product.aspx?productid=5

  Diana

  Microsoft Answers Support Engineer

• Expanding Cross dissolves on mov. the files cause first crashing?

  Hello Adobe community.

  I was wondering if anyone else is having the same problem;

  

  

  Strangely, this happens when dragging multiple clips with a cross dissolve (and sometimes even simply by dragging a clip it freezes).

  I already tried to create another project file in another scenario, but the error still appears. I have to work around by removing dissolves it and then adding them later.

  Hope anyone can help with that, or at least fix the bug.

  -John has.

  Try to export a PNG image instead of use the frame to hold.

• How can I move files/folders to iCloud back to their original finder folder

  I just updated to OS Sierra and noticed that my documents folder was empty. How can I move files/folders to iCloud back to their original finder folder?

  Thank you

  The Duke

  See it - Add your files, Desktop and Documents in iCloud Drive - Apple Support

• I tried to export mov (quicktime) file and I wasn't able to do it, do you know if its cause for the trial version?, because Im assessment buy software

  I tried to export mov (quicktime) file and I wasn't able to do it, do you know if its cause for the trial version?, because Im assessment to buy the software, I don't know if I need to configure or add any coder, I don't want to buy the software if Im not able to export to any format

  Thank you

  Change your export settings.

  You are trying to make progressive SD images in clips HD interlaced with a 24 p dv codec (not possible where the error but do not know what it says exactly)

  What is the final destination of the film.

  I'm guessing that you are a beginner at the beginning of video editing here:

  Learn Premiere Pro, get help and support. Adobe Premiere Pro CC

• Noob question: how to move a file to a virtual machine to BACK?

  I have an old piece of software that I still need to run under DOS. (Believe it or not).  I managed to create a virtual machine with 6.22 running BACK.  AND, a few months ago, I managed to move files on the disk "C:".  But, it seems to me have forgotten one, and for the life of me I don't remember how I moved the files.

  So, I have a file on the host computer that I need to pass to the guest computer.  I traced the virtual disk to a drive letter on the host computer, but whenever I try to move my file, I get an error.

  What is the right way to do this?

  Thanks in advance!

  -Spencer

  Another easy way is to write the missing files in an iso and iso power of the virtual machine

  probably even easier, then using flps - like everyine is an application that can write CDs so creating isos is trivial

• I can't move folders/files in the iTunes library

  Hello

  I am reorganizing my iTunes library after the implementation of a server. Even if I used the dialog box in iTunes (Preferences) to move the files, many, many links were broken. There is now a location in the library moved with the following path: X:\iTunes Library\Music\Unknown Artist\Unknown Album. The files in this folder are all parts of the existing albums. The rest of the songs from these albums are properly located in the location of the library, which is to library X:\iTunes. Most of these files is purchased AAC files. The files are not corrupt, by what they play. They also seem to have the correct information, when I look in the Properties dialog box, or query information through read in iTunes. In iTunes, it is ALWAYS the path: X:\iTunes Library\Music\artist\album, with the annexed artist/Album information. For example: X:\iTunes Library\Music\Michael buble\christmas\01 it starts to resemble a large number of Like.m4a. I would like to move these files to their correct locations in X:\iTunes Library\artist\album, as well as the rest of the files in the albums they are detached. When I try to move the files, they are not being apparently copied or moved. If I connect them to the entries in iTunes after the move or double click on it to play in iTunes, they disappear from the new location and reappear in a folder with the path X:\iTunes Library\Music\Unknown Artist\Unknown Album or one with a path like this: X:\iTunes Library\Music. I have no solution to this problem, I have tried everything I know to do to fix and searching newsgroups for a solution. I'm on Win10 and iTunes 12.3.1.23. Help, please. This is driving me crazy.

  Scott D.

  The typical reason for the files are moved to the folder unknown Artist\Unknown Album is that they do not have a tag or the tag is empty. This is true of all the files in the .wav format, as they have tags. In some cases, mp3 files may have several tags, that maybe not all the same data and including an iTunes reads or updates is not set. ITunes can finally move things forward in the wrong folder where there are permissions issues, but usually that moves things to a level or in rare cases throw them on the desktop.

  When you say that allowing you to move the preferences files, you update the path in the media folder and then consolidate library (create copies, leaving you to delete the originals by hand) or did you move them by hand and then update the file? This second method is a common cause of problems. When it works it is a happy coincidence. It is not how you are supposed to move content from iTunes.

  In a modern iTunes library, the correct layout for the elements of music is \Music\- with other types of media stored in different subfolders ------.

  Follow the steps to repair the security permissions for iTunes for Windows to your Media X:\iTunes library folder.

  Verify under file > library > library organize the box to reorder the files is grayed out. In case contrary it check now and apply. It should reorganize and files located in ------------ form. He pourrait also move things out of unknown Artist\Unknown Album.

  Look for the entry in the library for one of the files that is still unknown Artist\Unknown Album and information. Check that album & artist are filled. What format is the file? A correction in the name of the song, for example to add an end of X. Assuming you have the possibility to keep organized activated now moves to the right folder? If so turn keep organized power off, then turn it back on it. Who should correct the other misplaced items.

  For more information about the ideal layout for your library, see make a library of portable split .

  TT2

• Move the file in the folder of the same name in AppleScript

  I had a problem with the script below. Basically, on the execution of the script, I want to create folders based on the name of the file and move the files in the files of autocorrelation. However, at the minute, that I'll have to choose the folder in which the script should run.

  Folder to choose a folder

  say application 'Finder '.

  located fileList to the name of every file in Folder with name extension is "m4v".

  end say

  the value point text delimiters to ".".

  Repeat with dittos in list of files

  get each text element of dittos

  masterFile defined in the point 1 of the result

  say application 'Finder '.

  create a new folder to Folder with properties {name: masterFile}

  move (each file from the folder Folder whose name contains masterFile) will cause

  end say

  end Repeat

  Ideally, I would like it to run automatically, but the folder is on an external hard drive. (\Volumes\Lacie\Movies). and I had problems to use the POSIX and 'alias' to properly re-create the path of the file desired.

  Any help would be greatly appreciated. Thank you!

  Hello

  You can try something like the AppleScript script which is a simple shell script wrapper.

  set d to (choose folder)'s POSIX path
  do shell script "/bin/bash -s <<'EOF' - " & d's quoted form & " 2>&1
  cd \"$1\" || exit
  shopt -s nullglob
  for f in *.m4v
  do
      m=${f%.*}
      [[ -d $m ]] || mkdir -p \"$m\" || continue
      mq=$(sed 's/[^[:alnum:]]/\\\\&/g' <<< \"$m\")   # quote meta characters for regex
      find -E . -depth 1 -type f -iregex '.*/'\"$mq\"'.[[:alnum:]]+$' -print0 | xargs -0 -J% mv % \"$m\"
  done
  EOF"
  

  For example, given that you choose/path/to/directory in the folder - source

  Input state:

  /path/to/directory/abc.m4v
  /path/to/directory/abc.txt
  /path/to/directory/abcd.m4v
  /path/to/directory/abcd.txt
  

  Status of the output:

  /path/to/directory/abc/abc.m4v
  /path/to/directory/abc/abc.txt
  /path/to/directory/abcd/abcd.m4v
  /path/to/directory/abcd/abcd.txt
  

  Briefly tested under OS X 10.6.8 but no guarantee of any kind. Please make sure that you have a full backup of the original files and directories before you run this kind of script.

  Good luck

  H

• How to move a file to the rear using the Terminal

  Hello world

  I just recently started to learn how to use the terminal in OS X I learned how to move files from one directory to another, but I don't know how to move a file back again. Here is an example:

  (I'm already in the Desktop directory) In my office, I have a folder named "music" and a file called "algo.rtf". In order to move the "algo.rtf" file in the "music" folder, I type the following command: "musica algo.rtf mv / '. That works perfectly fine, when I check, the file is now in the new folder.

  But what happens if I want to move the file "algo.rtf" which is now in "musica" on the desktop? I can't understand. I tried the following:

  'cd musica' (so now I'm in the folder where the file is) and from there I typed: "mv algo.rtf Desktop /" (but then it is said; no such directory not found)

  I understand that he says no "found" because it is looking for a folder named "Desktop" in the folder named "music" and this is why it does not work.

  But that still doesn't help me much because I still don't know how to bring it back to "Desktop". If anyone knows how to do this, I would be very happy for your response!

  Thank you.

  Use:

  MV algo.rtf...

  (140623)

• convert Quick Time video in a usable in Windows Movie Maker file

  File conversion

  How to convert a QuickTime video to a usable in Windows Movie Maker file

  Hello

  1. What operating system is installed on the computer?

  You will need to use a third-party converter to convert files into a format recognized by Windows Movie Maker. You can use your favorite search engine to find a software that will help you convert the files.

  WARNING:
  Using third-party software, including hardware drivers can cause serious problems that may prevent your computer from starting properly. Microsoft cannot guarantee that problems resulting from the use of third-party software can be solved. Software using third party is at your own risk.

• I can not move the files to a folder in windows XP, only to copy them, and I get the windows error. This happens on any file or folder.

  I use XP Pro SP 3 and I'm having a problem with moving the files from one folder to another, no matter where the folder or files. If I try to move a file, it crashes and it cannot be opened or used. If I move a folder, then crashes all the contents of the folder, and I can't even open the folder, it tells me access is denied, this nothing else. If I try to delete the file, then I get a prompt to error telling me that the file or folder is not accessible, and that access is denied and "make sure that the disk is not full or write protected." If I try to move the files corrupt in another folder, this time I get the message "Unable to move or replace" the file in question and "make sure that the disk is not full or write protected." If it is a document as a text file, then I can open the file and there is a prompt indicating that access is denied. I can then use the text document and save something, but if I close the document and then try to reopen it, all the changes are lost.
  It is not this problem if I move the files to an external device or disk drive.
  I am running as an administrator.
  Right now, if I need to move a file, I copy it to its destination, which is possible and then delete the original file. With the help of a release program was the only way I could delete these files, which could no longer be used.

  Hello Closrapexa, welcome.

  1. do you have this problem started recently?

  I recommend trying the system restore to bring the system back to a State before the problem started. Try this:

  1. click on START

  2. click on "all programs".

  3. click on "Accessories".

  4. click on "system tools."

  5. click on "system restore."

  6 follow the prompts shown to restore your system to a date before the problem started. Although the system restore does not target the personal data, it is recommended that you back up all data such as music, photos and documents in case something is not bad.

  Let us know what happens

  Thank you!

  Ryan Thieman
  Microsoft Answers Support Engineer
  Visit our Microsoft answers feedback Forum and let us know what you think.

• How copy/paste or copy/move a file to another folder in Windows XP

  I need to copy/paste or copy/move the files from one folder to program existing to another folder.

  Use the movement commands to copy do?

  Hi Jimmyjack1941,

  I suggest you to read the following articles for more information.

  These are the items if you use the Windows Explorer to perform operations:

  To copy a file or folder

  http://www.Microsoft.com/resources/documentation/Windows/XP/all/proddocs/en-us/windows_fcab_copy_file.mspx?mfr=true

  To move a file or folder

  http://www.Microsoft.com/resources/documentation/Windows/XP/all/proddocs/en-us/windows_fcab_move_files.mspx?mfr=true

  You can follow these commands to move and rename the file or folder using the command prompt:

  Moves files and renames files and directories.

  To move one or more files:
  MOVE [/Y | /-Y] [drive:] [path] file1 [,...] destination

  To rename a directory:
  MOVE [/Y | /-Y] [drive:] [path] dirname1 repert2

  [drive:] [path] file1	Specifies the location and name of the file or files you want to move.
  destination	Specifies the new location of the file. Destination can consist of a drive letter and colon, a directory name, or a combination. If you move a single file, you can also include a file name if you want to rename the file when you move it.
  [drive:] [path] dirname1	Specifies the directory you want to rename.
  repert2	Specifies the new name of the directory.
  /Y	Deletes the request for confirmation that you want to replace an existing destination file.
  Y	Causes of request for confirmation that you want to replace an existing destination file.

  The switch /Y may be present in the COPYCMD environment variable. This can be derived with / y on the command line. Default value is quick to replace unless is running of command MOVE within a command script.

  Example:

  move c:\windows\temp\*.* c:\temp

  Move the temporary directory c:\windows\temp files in the root, this is of course assuming you have the windows\temp folder.

  Note: Microsoft does not move the files/folders installed application.

  Hope this information helps.

• Windows Movie Maker - file invalid / not found

  I made a movie a few weeks previously registered, get in there a few days later and made more copies. Today, I tried again and I keep getting a message that the file is not valid. I tried opening upward in the creation of DVD and it keeps saying that it has failed. I tried the suggestion of unlicking the box under the sign that says (hide extensions of known file types) - which didn't work. I tried opening the film again and all my imported data is there... just not the movie itself...

  Help, please!

  Yes, it's the same information I read in other forums. I closed the movie maker and tried to reopen the case. I always get an error message that is not valid. I can't find any other file that does not end in MSWMM. After that I closed the error message. All data are available in the media imported section, but the Council of the timeline or history is completely empty / blank - but I know that he was saved several times...

  If the film itself has disappeared... is there a way I can get it back?

  ===========================================
  If you cannot open the MSWMM file in Movie Maker file must
  be damaged. Best bet would be to recreate the project.

  As for the movie... unless you have published (saved) project in the
  Film WMV or AVI format... it was never a real movie file.
  (this would be a clip that would play in Windows Media Player
  and could be shared with others)

  The following articles discuss Publishing:

  Windows Vista-
  Publish a movie in
  Windows Movie Maker
  http://Windows.Microsoft.com/en-us/Windows-Vista/publish-a-movie-in-Windows-Movie-Maker

  Movie Maker Vista - Edition
  http://www.Papajohn.org/Vista-publishing.html

  Volunteer - MS - MVP - Digital Media Experience J - Notice_This is not tech support_I'm volunteer - Solutions that work for me may not work for you - * proceed at your own risk *.

• Once the publication to a Windows Movie Maker project, can I go back and make changes?

  make changes to the film maker projects

  Once the publication to a windows movie maker project, can I go back and make changes?

  Once the publication to a windows movie maker project, can I go back and make changes?

  ==================================
  If you have saved the project .mswmm file... you can reopen
  and continue to edit the individual elements of the project.

  If you published (recorded) in the movie WMV format...
  You can re-import but this will be a single clip just like any
  another file source video.

  Volunteer - MS - MVP - Digital Media Experience J - Notice_This is not tech support_I'm volunteer - Solutions that work for me may not work for you - * proceed at your own risk *.

• Why does movement of files on a USB flash drive last so long?

  I don't know if this is a Windows problem, but when I move a lot of files/folders (no copy, but select, then drag, or cut and paste) a place on the USB to another place on the flash drive, it takes much longer than the same hard disk.

  What is a Windows problem or a problem of flash player?

  If Windows is somehow move the files into pieces on the hard drive, then moving them back to the flash drive, I could see that as being the reason, but this seems very inefficient. If Windows says just the flash drive to move files and it does itself, I wonder if it is an inefficiency in the flash drive (or formatting) or just the nature of how flash drives move some files.

  I don't know that you have understood my problem. I moved the files to the flash drive from one folder to another on the flash drive. When I move tons of files in a folder on the Windows Installer by car, no matter where the records are or the number of files/folders are moved, it usually happens instantly and occasionally perhaps takes a fraction of a second or two; I know it's simply by changing the index (do not physically move the files). With a USB flash drive, it takes seconds to minutes, depending on how much is moved, which is usually much less to install on the windows drive. It's because flash player must physically move the files on the disk, there is no index to put it as on a fixed drive.  In addition the only way to move is to copy in memory, and then write it to the new location.  This means that each overflow bit must go through the USB connection (which is thousands of times slower than SATA cable on the real hard disk), and since then he has to go twice (in and out), it is even half as slow as new.

  There is no transfer between the hard drive and the flash player I know.

  What this means for me, it is the index or take more time to rewrite, or files are actually moved. What I'm asking is if Windows is somehow data transfer (even if it's the index) drive flash disk, then moving them backwards, slowing things down. I think that even moving them by RAM would slow it down, but I'm not sure.  Also considers that the internal drive is cached. So even if a bit should be moved, Windows will just notice "Yes move this bit later."  The progress box says it completed instantly, but really uses lazy writeback just finish the job later.  That is why if you lose power to your computer, it corrupts the files got reported as fact, but were not actually written on the disc.  Flash drives do not use the lazy "write behind caching" because they never know when the user will disconnect unexpectedly, so that they take the slow lane and check writing all ended before they say the progress bar to advanced. 

  You can change this second element by setting your USB device to "best performance" in the device, as Manager below.  But I do not recommend because it cannot handle unplug you the reader more.