Move files between the DSO and the storage library

Hi all

I use Oracle RAC 11 g ASM on Oracle Enterprise Linux 32-bit 2.

I created a group of disks called + FRA for my quick/flash recovery area.
I take the backup of my database and and all backups are created sub + FRA.

My requirement I want old backups to a /backup of operating system mount points to be moved to the library of storage by my backup storage management solution.
and in the case where I want to restore everything back up I'll copy back from /backup to + FRA diskgroup and then restore my database

Is the above a good practice?
Should what I do? CP command will help? given that I have faced questions while moving the files using the command cp of ASM to the OS directories for vice versa.

Kind regards

Hello

1. I'll take a daily backup of my database to the FRA + ASM disk group.
2 backups older then 1 month, that I need it submitted to / backup /.
I used this: backupset finished after ' sysdate-30' backup format ' / testasm/backup%U' tag = "OLDBACKUPS" entry of deletion;
is correct?
or can I say backup obsolete? and there I will be backed up obsolete since FRA on different location?
3 when I backup my Flash region recover I can instead just delete to delete the input set based on condition of "longer than 1 month?

The question is how long you want to keep your backups in both places?
Example:
If I want to keep two months of backup (regardless of location)

Configure the 65-day WINDOW retention policy;

Above all the backup of the database will be stored on + FRA

Then as maintenance will pass you every day all the backups more 30 days to ' / testasm / '.
for example

backup backupset completed after 'sysdate -xxx' format '/testasm/backup_%U' tag=OLDBACKUP delete input;

So, you all first 30 days of backup on + FRA and older than 30 days in ' / testasm / '.

So, during the restoration, the concept is the same, the Oracle will read the files in your own location.

The two locations will be kept, catalogued and managed by RMAN.

In this scenario, the RMAN delete expired files only in ' / testasm / ' because the older files will be there.

If ' / testasm / ' is not shared between the nodes, I recommend that lets you share the NFS file system. (although I prefer ACFS)

If NFS is not an option, you need to move and delete obsolete node that have mounted "/ testasm /". You should be aware of the limits of availability of this file system.

Suppose that you backup all the files in ' / testasm / ' tape (without using RMAN) and RMAN delete these files, because they are obsolete. You can restore these files from a bunch of ' / testasm / "and catalog with this command" RMAN > CATALOGUE START WITH ' / testasm / '; This will increase you the retention of backup, but covering these files saved will be your provider of backup media retention policy.

Hope this helps,
Levi Pereira

Tags: Database

Similar Questions

  • Do not click on in the VM and can not move files between hosts and virtual

    Do not click on in the VM and can not move files between hosts and virtual

    Home - Windows XP x 64 Edition

    Virtual - Windows 2003 Web Edition

    -vmware.log

    ...

    sept 23 14:10:17.875: mks | Setting size 40 pile of thread to 1048576.
    sept 23 14:10:17.875: mks | Adjusting size of 41 of the stack of the thread to 1048576.
    sept 23 14:10:17.890: mks | USBGW: Writing referee op: 13 len:36
    sept 23 14:10:21.718: vcpu-0 | Unified TOOLS loop capacity requested by 'box to tools-MDN; now sending via the TECO
    sept 23 14:10:21.718: vcpu-0 | GuestRpc: Channel 7, toolbox-MDN app reviews.
    sept 23 14:10:21.718: vmx | DnDRegisterRpc: Rpc of DND already set to 1
    sept 23 14:10:21.718: vmx | CopyPasteRegisterRpc: already the value 1
    sept 23 14:10:21.890: vcpu-0 | VMXVmdb_LoadRawConfig: Loading of raw configuration
    sept 23 14:10:22.000: vmx | DnDRegisterRpc: Rpc of DND already set to 1
    sept 23 14:10:22.000: vmx | CopyPasteRegisterRpc: already the value 1
    sept 23 14:10:23.750: mks | USBGW: Writing referee op: 13 len:36
    sept 23 14:10:30.703: mks | Setting size 40 pile of thread to 1048576.
    sept 23 14:10:30.718: mks | Adjusting size of 41 of the stack of the thread to 1048576.

    ...

    Any ideas?

    Thank you

    If your license key allows, update your VMware Workstation version 7.1.4

    Otherwise, at least upgrade your VMware Workstation to version 7.0.1

    In the menu bar, help-> Check for Updates on the Web.

  • How can I move files between folders to cloud storage?

    How can I move files between folders to cloud storage?

    Hello

    1. navigate to the folder that contains the files you want to move.

    2. click on the 'Batch' icon in the upper-left.

    3. Select the file that you want to move.

    4. click on the icon 'Move' at the top.

    5. This should list the files and allow you to move the files.

    I hope this helps.

  • How can I move files to the system folder?

    Hi all

    I was wondering how to move files to the system folder. With the update to El Capitan and the former program is no longer works and the developer suggests moving some files on the system folder that should fix it, but even if an administrator account I don't have write access to the system-> library folder where they need to go. Any help would be appreciated.

    Thank you!

    Steve

    In short: you do not have. The folder/System is only for Apple.  The new protections in El Capitan make it impossible for you to place the files.

    This is what the folder/library for: install additional components to the system, but keeping them separated from the basic installation.

    What software are you trying to run? What files we told you to move? I'm curious to know what type of developer will tell you to put the files in / System.

  • PC, Lr, folders, move files/folders on the hard drive, download WARNING "move files on the disc, if you continue, this move... change... can be undone. question: my original files will be damaged?

    PC, Lr, folders, Action: moving files/folders on the hard disc autour, download WARNING "move files on the disc, if you continue, this move... change... can be undone. question: my original files will be damaged? If so, how can I move files? Thank you

    No problem. I think that the warning means that you will not be able to use Undo to bring back the pictures and it will have to do it manually. There is no risk of corruption.

    HAL

  • Move files using the Action Wizard

    Is it possible to move files from one folder to another on a network using the Action Wizard, I want to be able to move files to another folder, and then run OCR and other actions.

    N ° the Action Wizard cannot move or delete files his treatment.

  • Change the URL of the files in the storage of files

    Is it possible to change the URL of the hyperlink for the files in the storage of files on an email? I wish I could change the subdomain / microsite used for the URL as well as add query strings to the URL.

    Hi Andy,.

    I don't think that it is possible to change the URL. I know that you can rename the file or download another, but what is it. Work around a potential would be to host the files elsewhere on the Eloqua link it.

    Best,

    Ben

  • PC, Lr, folders, Action: moving files/folders on the hard disc autour, download WARNING "move files on the disc, if you continue, this move... change... can be undone. question: my original files will be damaged? If so, how can I move files? Thank you

    PC, Lr, folders, Action: moving files/folders on the hard disc autour, download WARNING "move files on the disc, if you continue, this move... change... can be undone. question: my original files will be damaged? If so, how can I move files? Thank you

    Duplicate thread: PC, Lr, folders, move files/folders on the hard drive, download WARNING "move files on the disc, if you continue, this move... change... can be undone. question: my original files will be damaged?

  • can't see files in the import library? Cleaning open key with LR Panel and click on all the keys!

    Hello

    I can't see my files in the import library.

    I cleaned my keyboard with LR 6 open.

    I hit all the keys!

    Adobe does not support LR6 on the phone!

    Grateful if you can help

    Bill

    Hi Bill,

    If you talk on the left side panel in Lightroom, please press the F7 on the keyboard, you will be able to see the Panel on the left.

    I would like to know if that's what you're looking for?

    Kind regards

    Tanuj

  • How to move files between accounts?

    Hello

    I used my MacBook with administrator account because I got it. (over 4 years)

    I guess that there is a problem or annoying with it, so I made a new user with normal privileges account today.

    But I have no idea how to make to move all the files, including the Aperture library, films, documents, music in iTunes, download and so on for the new directories of account without losing storage space. (which Directory directory to which? that's it?) I think I need to move and delete files that I can't know that they should be deleted so that the files don't not to occupy the SSD.

    I hope someone can help out me.

    Thank you

    JH

    Run for the most part not Administrator protects you from yourself.

    The best thing to do is use the new account as the account admin, then demote your current account at the standard. Just make sure that you promote the new account before you downgrade your current account.

    On each screen of the user in users and groups, check or uncheck the box that says "allow user to administer this computer."

  • Move files between folders skydrive

    I want to be able to move files between different folders Skydrive.  I can't seem to do, so I have to remove

    Reupload the file each time. There must be a better way, but I don't know how to do

    I am using Windows * on your desktop with the latest Internet explorer.

    Just looked at my https://skydrive.live.com via browser IE10.

    Right clicking on a file opens a popup context menu and one of the options is to move.   I choose move and he turns his wheels and presents a list of other existing sections of skydrive and records.

  • How to move files between folders in Lightroom 3?

    I would like to move a file from one folder to another one of Lightroom 3 (do not discuss why). I searched the net but couldn't find the answer (maybe I missed it). When I click on a photo in the grid view and then drag and drop this file into another folder in the folder Panel (for the move), a small sign more (copy) appears and a copy of the file is placed in the second folder. If I try to delete the photo in the original folder (for the move), two copies of the file are removed. I tried pressing all kinds of keys on the imac but unable to get the move to work. Ideally, I would like to move a group of pictures but can not move even one. Does anyone know how to move files between folders in Lightroom 3?

    Try to select the pictures, right click on the folder target and choosing "move selected Photos to this folder.

  • How to share files between Windows XP and Windows 7 without password?

    Hey guys, I want to share files between windows 7 and windows XP. I don't want to put the password on my Windows 7 or Windows XP account. I am going on my Windows XP perfectly shared files from Windows 7, but I am not able to go on my files of windows 7, the cause of my XP he asks user name and password. I enter the user name and it does not accept it if I make a password for my windows 7 and enter as the user name... I don't know what to do guys any help?

    Windows 7 only WILL NOT allow you to share files without a password, it's all just a common sense safety requirement.  It of a very bad practice to run your Windows installations with a null value, a password, give your facility a valid password.

    The simplest around your problem is to create an account with the same names and passwords on each machine and so typed the password when the connection is too a problem allow AutoLogon on the machines.

    John

  • How to separate the Raw files of the photo library

    My photo library is over 700 GB. I have a lot of raw files that are 30 MB or more. How can we separate the raw files in a separate file or a separate library?

    Duplicate your photos library in the Finder and then remove all the BULLIES of the first library photos and all photos that are not the RAW files of the second library.

    You can search for RAW photos with a smart album:

    File > new Smart Album

    Then set the rule set to "picture is GROSS."

    Of the other library use the rule 'The Photo is not BELIEVED'.

  • How can I download my file in the Adobe library?

    How can I download my file in the Adobe library?

    Here are the instructions: Document Cloud Help | Manage files

    Follow the steps of downloading files (https://helpx.adobe.com/document-cloud/help/files.html#upload_files).

Maybe you are looking for