Move the control to turn on the LED

Similar Questions

• How can I change/turn off the led under the speakers on Satellite P100?

  How can I change/turn off the led under the speakers? (in Satellite P100 (PSPA6E))
  Now I see the light only in the left side, but when I bought the computer left and right led line lights blue under the speakers.

  Gazz's right. It is not possible to switch off the LEDs. If just one LED is on the other must be faulty. Contact the customer Service of your country partner. I'm sure they can disconnect one too if you n t need her.

• Turn off the bookmarks bar bulging feature automatically on the left side of the screen when you move the pointer to the left

  It's bothers me a lot, because I'm used to move the pointer to the left of the screen when I don't want to see it. Now, it increases the Favorites bar, which was not my intention. I checked all the options, but I couldn't turn it off. Maybe you can change to the code level?

  Thanks in advance!

  Sadowskim,

  Cancel Safari, bookmarks/favorites bar appears on the left side, if the cursor of the mouse is on the left. This link addresses the problem you describe.

  I suggest that you provide Safari comments describing your need for a user option.

  

• Turn off the LEDs in the structure of the case

  Hello

  I was wondering if someone could help me solve a problem in a software test bench that I am developing. I have attached some of my code in which the problem is visible. I have a business structure that is triggered by a 'push button '. I want the TEST that is currently RUNNING LED remain lit until the end of the execution of the case structure (condition true) then shuts down once it is completed. But the LED does not turn off and remains lit. Is that what I can do in the condition False to activate the LED is off when the code is not running. Please note that to run the program, you will need to "run continuously. I want until the led turns off after getting the 'result' so that the software operator can know that he is free to perform the next test. But now when the 'Start Test 2 "is executed after 'Start Test', the LED stays on.

  It might be a simple solution that I can be not familiar with, but forgive me, I am a new user of Labview and I could not find a solution to this online.

  Thank you.

  Kind regards
  DPAC

  Hi DPAC.

  simple solution as requested:

  

• Turn on the LED for periods

  Hello

  I am trying to write a code that turns on an LED if a condition is met for five seconds.  Let's say I am to evaluate the slope of a curve.  If the slope of the curve remains greater than or equal to 1 for 5 seconds, then the LED should turn on.  Initially, I thought I could use a number of cycles or the elapsed time express VI, where if my slope become greater than 1, then the timer would start.  If the slope is less than 1 before the second 5 mark has been met, then the timer will be reset to 0 and start the next time the slope become greater than 1.  Help, please!

  Thank you!

  foolysubmerged wrote:

  Hello

  I am trying to write a code that turns on an LED if a condition is met for five seconds.  Let's say I am to evaluate the slope of a curve.  If the slope of the curve remains greater than or equal to 1 for 5 seconds, then the LED should turn on.  Initially, I thought I could use a number of cycles or the elapsed time express VI, where if my slope become greater than 1, then the timer would start.  If the slope is less than 1 before the second 5 mark has been met, then the timer will be reset to 0 and start the next time the slope become greater than 1.  Help, please!

  Thank you!

  Using the elapsed timer express VI is a good solution. Use the reset entry as soon as the slope is located off spec.

• How the LED lights up when a threshold is reached, then turns off only when the value does not reach the threshold for a while?

  Hi, I want to write a program that can turn on the LED when a range of value, this is the threshold and only when the value does not reach the threshold for a period of time, say 5 seconds, then the LED will turn off, otherwise it will remain. How can I achieve this in labview? Can someone help me? Really thanks!

  I assume that you use a while loop to keep the updated value.

  Add a record to offset to your looping it initialize with a U32 (time in ms)

  Add the registry to offset to your loop that keeps the previous value of your bool

  When your reaches the threshold value => the light and set the current time in your shift register.

  In the next iteration of the loop weather check value is still above threshold

  => Y-online previous set to true?

  => Y-online the next iteration

  -Online N => turn switch on and set the current time in your shift register.

  -Online N => subtract the time current less time shift record-online more then 5 seconds?

  => Is => keep turning on

  -Online N => turn given

• The led "Alarm" on my Pixma MX310 won't turn off. What should do?

  The led "Alarm" on my MX310 won't turn off. I tried "Stop/Reset" and changed cartridge. I always get the msg "Check ink E150" on the screen. What should do?

  Hello

  This error indicates in general that the ink cartridge is not seated correctly.  Please try to take out ink and back again and don't forget to follow the guide step by step by CLICKING HERE.

  If the error persists, please join our team of technical support at the following link: CONTACT US.

• Cannot move the files to the trash - just keeps turning

  Original title: trash

  I cannot move the files to my trash - just keeps turning... but does not connect. Have tried empty, but said: "to have 0 in the trash.

  Hey golfer Mi,.

  1. what type of files you delete?

  2. were you able to move the files to the trash before without any problem?

  3. did you of recent changes to the computer?

  Step 1:

  You can try the following steps and check if it helps.

  You can try to drag a file it and check if it appears in the Recycle Bin

  a. right click on the Recycle Bin and select Properties.

  b. disable the option "do not move files to the Recycle Bin. Delete file immediately when it is deleted. "and check.

  Step 2:

  You can also try to create a new user account and check the issue.

  Create a user account

  Hope this information is useful.

• I can control the LED "flash"?

  I was wondering if there is an API to toggle the LED "flash". I saw the LED class, but it is not a constant for the flash, just the trackball and the State LEDs.

  There is no API in the BlackBerry API set that allow you to control the camera flash on a BlackBerry handheld.

• Cannot turn off the LEDS on Cisco Aironet 1141

  I am trying to turn off the LED on a Cisco Aironet 1141 p/n AIR-AP1141N-A-K9.  It is a standalone AP and the CLI I publish this command:

  turn off the display of #led AP (config)

  The light does not go out after you type this command.  If I "run" it appears in the config so that the order has been accepted.  Is there another way to turn off the LED?  I'm under JA1 IOS Version 12.4 (21a).

  If you have the AP 1141 under warranty, you can send an email to [email protected] / * / PA serial number and they can post you the picture ask you.

  You want to say "Thank you"?
  Ne. Just note the useful responses,
  It is more useful than 'thank you'.

• After update for first Pro CC 2015.3 I can not move the values in the effect controls panel

  Hello!

  After update for Premiere Pro 2015.3 of CC, I can't change the value of the property in the effect controls panel by dragging left or right when you move the pointer over the underlined value. The two small arrows appear, but nothing happens when I drag them and it is so annoying. I tried now pressed the SHIFT key and several others trying to drag, but it makes no difference. I restarted the program and my computer but still no difference. All the patches?

  Thank you!

  

  Hello Ann,.

  I found the problem, it's my wacomtablet. When I use the magic mouse, it works great! So, I guess I should update the wacomdriver, perhaps. If your response gave me the idea to check for this. Thank you!

• How to move the control file ensures ASM

  Dear all,
  
  I'm physical configuration ensures (11.2.0.3 DB), and I created and copied the eve of primary to standby control file.
  
  What is the value for the parameter control_files init.ora? can I give below, OR I need to move the control to the DSO files?
  

  *.control_files='/home/oracle/stdbycontrol.ora'

  and then continue under commnads rman,
  STARTUP NOMOUNT
  $ rman target sys/oracle@prod auxiliary.
  RMAN > DATABASE of TARGET duplicate FOR STANDBY;

  Dear anand
  Check the answer if you have the solution to your question.

• Move the playback controls

  Is it possible to move the playback controls to the top of the screen? I have trouble finding the settings that will allow me to do.

  Thank you!

  KS

  Hello

  Could you please say what version of Captivate you use? In CP5, you can insert a bar reading "floating". Take a look at this blog:

  Added a floating bar in Captivate 5

  Those are the widgets, which are not available in CP4, sorry. CP5, that you can also change the position of the playback bar upwards (using skin editior) but in CP4 PlayBar can always is at the bottom.

  Lilybiri

• What is going on??? MY screen goes up and down control when I move the cursor and extends and shrinks when I move the cursor on the screen.

  When I move the cursor to the top or the bottom of the screen literally flies upwards or downwards. When I move the cursor through the scree, it expands or shrinks.

  Try disabling hardware acceleration in Firefox.

  • Tools > Options > advanced > General > Browsing: "use hardware acceleration when available.
  • https://hacks.Mozilla.org/2010/09/hardware-acceleration/
  • https://support.Mozilla.org/KB/how-do-i-upgrade-my-graphics-drivers

  You may need to also a (hardware) problem with the mouse or the mouse driver.

• Help me!!! Air-sap702i can he turn off the LED standalone ap mode? What is the command?

  I need help with the problem.

  The customer needs to put out of the LED. because it is installed in the hotel room.

  Interference LED blinks the eyes to sleep.

  I need to know the command line to disable autonomous LED of AP mode in the version of the firmware. 15.x.x

  Is it possible?

  help me T - T

  Thank you

  Phong

  Do not have this AP, but have you tried this:

  config t

  LED display off

  Scott