Move the data to the left and to the right on the graph in real time

Similar Questions

• Control of data using multiple thermocouples via indicators and the waveform in real-time

  I apologize in advance for this question is probably a bit simple but I'm all new to labview and the forum and could use some advice. I have a CompaqDAQ with two 9213 16 modules of track and I'm trying to read in 30 thermocouples in a waveform, but also display 30 indicators so I can mark each indicator with the thermocouple for real-time tracking. Each thermocouple corresponds to a specific location and it is essential that the interface has an accurate indication or a label for each of them. I wonder if there is an easy way to do this in addition to split the signal and have 30 thermometers on my diagram? Perhaps a table any? If I use a table to create 30 thermometers, the DAQ assistant automatically sorts the thermocouples according to ascending numerical order. For example, would be the indicators of first and second on my interface automatically assigned to channels a0 and a1 of the first module, or should I do it manually? Even for the waveform?  Thank you very much!

  PS - Do not know if this message had need of more details, but let me know if more information is needed, and I'll give you!

  I see that you use the DAQ Assistant to create your task.  Now I understand why you may have about labelling.  It is easy of the seller NOR spiel booting...  But in any case, you already have a task to the MAX instead of use the DAQ Assistant?  The interface is similar and there may be a step or two, but your end application will be more effective and you will have more options with your data and properties.  For example, I tried to update the names of physical channel in the DAQ Assistant installation program, that it let you do, but it propagates that change forward to waveform chart legend.  Also, I don't know any property for this dynamic data type node, although I never use it either.  I suggest the setting up of your task and channels, Max if you'd give it a go.

  Since I thought I didn't really takes you all the way with you help, I wrote another one.  It uses a cluster, even if it's a bit barbaric.  I thought that there was a more eloquent way to do by changing labels, but I could not it works as I had expected.

• Can I download a background on the system in real time and run it?

  Hi, I would like to take advantage of some tools in the system in real time.

  I thought that I could download it by file transfer,

  

  and then did something like this in the system in real time.

  

  Probably it is not...

  However, there is other ways to achieve my thought in the system in real time?

  Do you mean the exe was built for windows, so that it is not allowed to run in time real system?

  Fix.

  I have to communicate between CompactRIO and servers through an ethernet cable...

  so... you write a program runs on the cRIO and bring it to your servers over TCP.

• I want to hang the Tower up to my big screen and instead of using a keyboard, I bind a tablet that I can use as a keyboard and to manipulate objects on the screen in real time

  I am in the middle of do a remodeling and think about a furture upgrade my PC at home, I want to hang the Tower up to my big screen and instead of using a keyboard, I want to connect a tablet that I can use as a keyboard and to manipulate objects on the screen in real time. Is there a way to do this?

  (1) before the PC upgrade, please read the complete technical documents for all devices

  you want to go to upgrade

  (2) it is the first thing to do to make complete lists of materials you want to change.

  Compare specifications detaily, note important diference between many of the same features

  (3) for more information on some devices and materials, see link below

  http://www.Microsoft.com/en-us/Windows/compatibility/WIN8/CompatCenter/home?language=en-us

• Satellite L50-B-17J - how to turn left and made a right click of buttons?

  Hello

  could someone explain how to turn left and do a right click buttons at the bottom of my touchpad? I have Satellite L50-B-17J and just put in place, however I can't use the buttons on the touch pad. I have to click twice on the touch pad and also click and hold to move things. Also can't use right click on the files.

  Many thanks in advance, its really bugging me!

  Matt

  Hello

  Can you please tell us what OS you are using?
  Do you use the preinstalled original Win8.1 64-bit, that you got with your machine?

  I mean the factory settings, everything should work fine, and I guess you don't l t notice this issue from day one.
  At this point I just can you suggest checking the properties of the mouse (touchpad) and make sure that everything is set correctly.

• The new Records real-time display

  I developed a CRM that is based on this post to a database of prospects.  The CRM index page performs a select query and displays a filtered recordset based on the SQL code.  This index page is updated every 30 seconds by an update of the Meta tag.  But I think there must be a more robust and efficient method.  Ideally, I would like to have a popup is displayed each time that the new record messages when clicked would reveal the details of the record.  And if such a robust method exists, which could better the overall updating of the data other than a Meta Refresh?  Any direction you can advise would be appreciated.
  .

  Some of which can easily be done with JavaScript and a function that makes calls to ColdFusion AJAX to check new records, on a timer (30 seconds).  You can use WebSockets which offers the display in real time, but according to the rate of data change, which might be overkill.

  For example, look at how this site or Google followed new messages using AJAX. If you are connected to these forums, your avatar at the top of the screen may have a white number in an orange circle to the left of the avatar - stating that you have new messages or updates waiting for your attention.  If you have no messages or elements, the circle disappears.  While new messages or items arrive in your Inbox, reappears in the circle and the number will change.  This is done via AJAX requests that ask the service Inbox on a given time interval. In your application, you will need to decide what is the appropriate interval (or make a user setting which gives them options such as 30 seconds, 1 minute, 5 minutes, etc.).

  All this is done without refreshing the entire page (what does refresh Meta Tag).

• Questions about the work in real-time

  Hello.  Just a few questions on usage in real time, in fact on the swf file.

  First of all, I want to create something of a drag and drop interface.  Is it possible to have a stage act as two separate steps?  I mean, is it possible to have the left side of my step hold all the components, they are moved to the right side of the scene and placed anywhere, the user can then click on save, and only the right side of the scene is saved?

  Secondly, I'm testing a few things.  What I would do to get a type of free transform on an image on the stage in real time, in the swf file?  So once the movie is played, the user can resize any image then how they like by dragging a corner of the image...

  Cheers for any advice.

  You can use 2 container (Sprite or MovieClip) objects one on left on the right.  All display list container objects have their own scene

  jou can so easily the steps as much as you want each independently controlled placed anywhere you want.

• monitor thread on the system in real time

  I have a SMU-8101 controller in my PXI system. I have it running with a system of operating in real time. I inherited some software WHICH has been used on a program of LabWindows used on a PC with a Windows 7 operating system. The SOFTWARE seems to work OK. My problem is when I leave the program I get an ERROR of EXECUTION NOT DEADLY

  "

  Source position thread ID unknown 0x000000EC

  Your CVI program ended on the target in real time. However, there still on the target in real time, the threads that are running or have already run the CVI code.

  Please check that your application cleans all its threads. Son left running after that your application can crash the target in real time when your application is unloaded.

  "

  As I said I got the code and there is a lot of it. I am looking for a smart way to track down these threads. I was wondering if there are tools available that could help with this? Or any other suggestions on how to run these lines down?

  Hi DPearce,

  This article knowledge base has some information on why CmtDiscardThreadPool causes your program hang and gives some recommendations for fixing it.

• where the daqmx on real-time target files are stored?

  Hello

  I'm working on an application that is embedded in a desktop RT target.  To make the system easier to maintain in the future, I would like to be able to generate a DAQmx task programmatically to the *.ini file exported from MAX.  In this way, users don't know what my code does to recalibrate the sensors or manage new material; they only know how to use MAX and where to store the files in config on the target.

  Where are the task daqmx, channel, and scale information stored on an RT target?  I have been through the files on the target you are looking for something that contains my task data but have found nothing, while dropping a node of system property in a VI running on the target will give a correct list of the tasks that I set up.  (The project that contains the aforementioned VI has no tasks in it IE: I do not import into the project.)

  Is there a utility that runs on the RT target that can generate a task at the time of the *.ini files exported?

  Thank you

  Exahustive keyword search led me to an answer on the forums.  I'll post here a brief summary in case someone else uses the same key words I.

  1 export the MAX configuration file

  2. write a VI that uses tools in the system palette to load the configuration on the target in real time.

  3 profit.

  In my case, the VI I wrote to download the config DAQmx also generates the configuration files for the screw on the side host and target, so everyone knows what is called tasks.

• Install OR Vision on the system in real time

  Hello

  I am trying to install NI Vision RT and NOR-IMAQ RT on my controller PXI-8108. However, I still get an error, there are unresolved dependencies and that some version of NIVISSVC is necessary.

  

  Does anyone know a solution to my problem?

  Is this problem related to the problem described in the knowledge base (Document ID: 46PK6PP6)?

  Some data from my host system:

  -LabVIEW 8.6.1

  -Measurement & Automation Explorer 4.6.1

  -NI Vision 8.6 (treatment of Image and Machine Vision, and Services)

  NOR-IMAQ 4.1

  OR-IMAQ I/O 2.2

  NOR-IMAQdx 3.2

  The PXI controller:

  PXI system (OR PXI-8108)

  PCI-GPIB

  -Chassis 1 (PXI-1042 (q)

  PXI-6733

  OR PXI-8432/4

  PXI-6233

  Thanks in advance for your help

  Bernd

  After installing Vision 9.0 and NOR-IMAQ 4.4 on my host, I had no more problems with the installation on the system in real time.

• Able user to zoom in/out the image in real time the performance of façade?

  Well I have searched this and have developed empty. What I would do, is to have a picture of a diagram on the front panel and during execution of the VI user can somehow zoom in/out the image in real time.

  I know there is something that is called Zoomfactor that you instantiate a way in the block diagram, but that seems to zoom in on a picture of race prior to the program. The zoom is not in real time. There is no possibility of real user to zoom in/out with free will, using the Zoomfactor I see. (Sorry I forgot display name of the service). And I saw messages by a man named George Zou that seems to come with a VI which is closest to what I want, but I pulled the VI site seems not compatible with my computer (my rig is under XP with Labview 2013 currently). So, I was wondering if someone else had found other answers appropriate to my specifications?

  Use a structure of the event to change magnification during execution.

  You can even program your own shortcuts to the structure of the event, for example if the user clicks on a particular point on the picture and you read this coordinate on, and you zoom way at this point remains in the Center... There are many options to play with...

• Browse the contents of the hard disk of the target in real time

  Hello

  Is there an easy way to browse the content of the hard drive on a real-time target by using the file path control (or another type of control)?

  What I have in my application is a PC real-time desktop (running on PharLap) who has a Main.vi running on it. There are a few configuration files (for this VI) I want to be able to read and record to that would be stored on the hard drive of the target in real time. However, when the application runs and I hit the Browse button, it displays the contents of the Windows machine and not the machine in real time. Is there something I'm missing?

  Please note that I can send via FTP on the Windows computer to the target in real time and can interact with the drive of the target in real time without any problem.

  Thank you.

  Mike

  If you LV 2013 actually use WebDAV screws thus:

  http://digital.NI.com/public.nsf/allkb/4EBE45E8A816B19386257B6C0071D025

  http://zone.NI.com/reference/en-XX/help/371361K-01/lvcomm/WebDAV/

• can't see changes to the photo in real time during editing

  Hello

  When I edit photo it won't let me see the changes in real time, unless I turn down hardware acceleration. I tried the update of windows and even downloaded the drivers two charts, but no solution. I read may be due to software mcafee, but I do not use mcafee...

  Thank you.

  Hello

  When I edit photo it won't let me see the changes in real time, unless I turn down hardware acceleration. I tried the update of windows and even downloaded the drivers two charts, but no solution. I read may be due to software mcafee, but I do not use mcafee...

  Thank you.

  ==================================
  If reducing the graphics hardware acceleration
  improves the issue... it's a strong indication that
  you have a problem with your video driver.

  Might be interesting to try to find the support Web site
  Mfg. of your video card for a Win update
  XP compatible video driver. Or... If your computer
  is a laptop... look for the support site for your computer
  Reference of the manufacturer.

  If you do not know the make and model of your
  Video adapter, see the documentation that
  supplied with the computer.

  Also you can find info on your video by driver
  go to Device Manager: you can launch
  By clicking Device Manager on... Start/run and
  type or copy / paste:
  devmgmt.msc
  And then press ENTER.

  Expand "Graphics cards" and right click
  the name of your graphics... then
  choose... Properties / tab pilot... FYI.

  You should find the make and model of your
  adapter display as well as the version of the driver.

  If the driver on the Web site is no longer
  current than you run...
  Download and install it. In addition, installation
  instructions that should be followed closely
  should be available on the support site.

  Once installed the new video driver... you
  can restore your full acceleration.

  Aslde the... If your editing functions have been
  working properly and suddenly changed... I am
  wondering if one of your Windows updates...
  updated your video driver.  Sometimes the new
  driver is not as functional as the one you have already
  a.

  System restore would have been an easy way
  to correct this, but maybe you could go to the device
  Manager and rolling toward the video driver earlier.

  (FWIW... it would be a good idea to create a system)
  Restore point before making the change)

  You can launch the Device Manager by going
  TO... Start/run and type or copy / paste
  devmgmt.msc
  And then press ENTER.

  * Proceed at your own risk *.

  Expand: Graphics cards
  Right-click on the name of the video card and
  in the menu choose... Properties / driver tab.
  Roll the button return to the version...

  (306546) HOW to: use the driver to restore roll back feature
  a previous Version of a device in Windows XP driver
  http://support.Microsoft.com/default.aspx?scid=kb;en-us;306546

  Windows XP - Vista - 7 - restore video drivers.
  Removal instructions
  http://www.nvidia.com/object/driver_rollback.html

  How to roll back a faulty device driver
  for a Version prior to Windows XP, Vista and 7
  http://www.techsupportalert.com/content/how-roll-back-misbehaving-device-driver-previous-version-Windows-XP-Vista-and-7.htm

  Good luck...

• 5 Lightroom Develop module does not display the changes in real time - locks on original image

  After almost a year of using Lightroom 5 (Version 5.7.1) with no problem there now will not show changes/changes I do them in the main view of the magnifying glass.  The image on the film down changes.  The Navigator view darkens, once a change is made.  If I I have the active secondary monitor it will show the changes in real time (because of the quality of the secondary monior I do not use it for changes).  If I go back to the magnifying glass library display changes to develop module are shown.  I can also make do and discover tiem real changes in the Librrary module in the quick develop Panel. IF I come back to the develop Module updated (edited) image but more it is stuck on this image in the Loupe view.   I suspect strongly I accidentally made some key race in the error that created this situation, but I can't really pinpoint exactly when this problem occurred are contiguous 5 days ago.

  The problem persists with any image.  I tried several images - old and new.  The only software or any other change that I have introduced in the last 30 days was Piccure + 30 days ago.  I later have it removed as a precaution.  No change has resulted.  I took additional measures include 1) Reseting preferences (twice), 2) reinstall the software twice, the second time I deleted all the files of supported / presets except the current catalog and 3) I have used backup catalogs as well dating back to the period of time, well before the problem appeared.  I am running Windows 7 Professional with Service Pack 1, 64-bit OS

  Any suggestions greatly appreciated.  I feel like I'm under low on things to try.  Thanks - Jeff

  This could be caused by a defective monitor profile.

  As a diagnostic tool and possibly a temporary solution, try to set the monitor to sRGB profile.

  Go to control panel > color management and define the sRGB as the default profile.

  If this solves the problem, you should ideally calibrate your monitor with a standard material.

  

• data is plotted on the graph of absolute time delay

  Hi all

  I'm plot data on a graph of absolute time and I find 2 hours difference between the data displayed by the debugger (left) and data on the graph (X - SCALE AUTO).

  The time saved in ptTime, was acquired by using the function 'time' and the PC has Amsterdam, Berlin, Rome as time zone.

  Here, under a screen shot that implemented the code, the debugger and the result.

  The debugger is also showing the version in good time!

  Can anyone suggest me how to process data in order to have the same result on the debugger window and on the graph?

  A big thank you and best regards

  Sergio

  Question: in the CVI debugger show you, the time_t variable appears as a double, while its definition in 'time.h' is ' typedef unsigned int time_t; "so I am a little confused.

  Response: I did something nonsense in this screenshot: I took a variable of type double (it happened to be a UIDateTime, actually) and configured the debugger to format as if it were a time_t variable. The formatted values that the debugger shows me, therefore, are not valid, of course. But I just wanted to show the time_t format, because it corresponds to what you have in your screenshot, and I was already suspicious that you use time_t variable to pass to the curve.

  Furthermore, if you are not familiar with the way in which you can change the formatting in the debugger, this is how you do it:

  

  Usually, the debugger can automatically pick the best format to use, based on the data type of the variable (for example, with variables of time_t). But in this case, what the debugger calls a variable "Date Time" is all just a double. The debugger cannot assume that you want to display all your double variables as a 'Date Time', and so you need to replace yourself.

  Question: I was not able to find UIDateTime using the ICB type, this is the value returned by GetCurrentDateTime(double *)?

  Response: There is really no such thing as a type of data "UIDateTime". I've been a bit remiss with my terminology. Unfortunately, when you're dealing with dates and hours, there are several possible representations of these quantities in the world of C, and it is important that you use the correct the intended variant you use for. In this case, the chart controls expect that you pass the time format used by the library of user interface, that is, one that is returned by the GetCurrentDateTime or MakeDateTime functions. The underlying C for this representation of the time data type is simply twice, and so it is not a good name to refer to it. That is why I used UIDateTime, but I should have been clearer than that.

  Question: Y at - it a function to convert time_t values UIDateTime values

  Response: Yes. You can use the functions of the programmer's Toolbox following two, in exactly this order:

  CVIAbsoluteTimeFromCVIANSITime (time_t ansiTime, CVIAbsoluteTime * absTime);

  CVIAbsoluteTimeToCVIUILTime (CVIAbsoluteTime absTime, double * uilTime);