Move the file to the vm to a logical unit number to another logical unit number

Similar Questions

• move the folder to a vista user account to another user on the same computer account

  How to move the file from one user to another

  How to move the file from one user to another

  Place the file in the Public folder.

  Public folder is accessible by all users. For the benefits of others looking for answers, please mark as answer suggestion if it solves your problem.

• How to move the program non-system to C: directory to another

  My c: directory is running out of space. So, I need to move some non-system files/folders to a different directory, namely the d: drive.

  I don't know how to do it.

  I use to have a program that could do it for me, but I can't find the CD he was on, and I don't remember the name of this program.

  I need detailed instructions on how to do what I have to do.

  There are a few MS programs I have ever used either but they are part of the system (Vista) program. Is it possible to remove them? This could free up a lot of spave on my c: drive.

  My c: directory is running out of space. So, I need to move some non-system files/folders to a different directory, namely the d: drive.

  I don't know how to do it.

  I use to have a program that could do it for me, but I can't find the CD he was on, and I don't remember the name of this program.

  I need detailed instructions on how to do what I have to do.

  There are a few MS programs I have ever used either but they are part of the system (Vista) program. Is it possible to remove them? This could free up a lot of spave on my c: drive.

  Hey billch42

  Make sure your partition d: is not your recovery disk

  If there are between 9-19gbs, which is normally a recovery partition and should not be touched, except to make recovery disks

  3rd party programs must be uninstalled and then reinstalled to the other partition

  When programs are installed they are not just placed in the folder programs

  they are distributed throughout the system operating in the accessibility of the registry by other programs, etc.

  You cannot remove the programs that came as part of the vista operating system

  but you can disable some of them

  http://www.Vistax64.com/tutorials/67732-Windows-features.html

  but you can move your files and data

  http://www.vista4beginners.com/move-user-files-folders-to-another-partition?page=2

  and the restoration of the system takes up to 15% of your hard disk space

  You can change that to a smaller amount

  http://www.Vistax64.com/tutorials/76227-system-restore-disk-space.html

  http://www.vista4beginners.com/system-restore-space-used

  and use panoramas disk cleanup

  http://Windows.Microsoft.com/en-us/Windows-Vista/delete-files-using-disk-cleanup

  If the d: drive is NOT the recovery partition, you can save the data on it then delete it and expand drive c: in the allocated d: today occupied by you giving a disc more

  Here's how to do it

  http://www.Vistax64.com/tutorials/95418-disk-management-delete-extend.html

  Walter, the time zone traveller

• How to move the label of a bottle of wine to another image?

  I shot two images of a bottle of wine.  We got the dark bottle, we label brilliantly flashed (so of course the bottle is not dark).  I can open both images in CS5, side by side, but no tutorial but managed to move the light dark bottle label, mainly because I am real new to this layers tips and tutorials most seem to leave out some key step or assume I know how to do the steps they mention.

  I'll open the two images side by side, select the light label, select the move tool and enter this label, move it to the other image, and it disappears behind the second image.  You all know what I am doing wrong, please help!  I want the light on the dark bottle label so I can keep as a final image.  Thanks for your help.

  Hello!

  So, I started using the Rectangle selection tool.

  I made a selection around the label:

  

  Then, right-click on the selection and choose "Layer Via Copy"

  

  Now, is right that new layer, and then choose Duplicate layer...

  

  When the duplicate later pops up, choose the image dark wine to move the layer to the other file:

  

  Now, you can see the light on the dark bottle label!

  

  Now for the fine tuning...

  With the new layer selected, click on Select > change mode quick mask...

  

  Now, the paint on the unwanted image to the layer parts:

  

  Click on window > edit in Quick Mask Mode to switch back again and click on the ""Add a layer mask ' icon: "

  

  Then, double-click on the layer and add a gradient overlay to simulate the shadow:

  You can try these settings:

  

  Now your label has a nice shadow!

  

  To follow...

• How do I move the express email outlook from one computer to another

  Hello

  How can I move my mail express outlook from one computer to another?

  Thank you!

  Assuming that the other machine is using Outlook Express too...

  Backup restore &:
  http://www.insideoe.com/backup/

  Backup and cloning of your OE identities:
  http://www.insideoe.com/backup/clone.htm

  In other words if you wish is to create folders on the desktop and do drag OE messages to these folders. Copy them to the Office on the new machine and then drag messages in office files to the OE files.

• How can I move the photo folders of a user account to another account of user inside a shared computer?

  I need to close a user profile, but I want to save my photos.  How can I move them to a new user profile?

  The same way you would to move or to copy any other file - copy on a USB key or a folder outside the records of user documents and then log in as a new user and backup.

  "ktownbambam" wrote in the new message: * e-mail address is removed from the privacy... *

  I need to close a user profile, but I want to save my photos.  How can I move them to a new user profile?

• move the project to a rcloud storage calculation > on another computer

  Hi all

  I am very new to AE but very excited about the prospects. Have created a project on my laptop, I need to move my cloud storage, then my stupid office for a fast rendering etc. How is that possible? I looked for the option "collect files" under the file menu, but not here.

  Thanks for your help in a very basic question.

  See you soon

  DCMaton

  File > addictions > collect files

• Question of Layer palette. I choose a layer and when I use move the tool on that layer PSCC jumps to another layer

  I use Photoshop CC 14.2.1x32. When I select a layer in the layers palette, then use the move tool to reposition an item on this layer PS force one jump to another layer. The only way I can put it back is by using free transform on the layer, I want to work. What happens with PS CC? Help, please. About to dump CC and return to the CS 6

  Uncheck the automatic selection in the move tool Options bar. That should do it.

• What is the process to move the VCenter SQL DB from one server to another?

  I read the threads for the displacement of vCenter Server and it's local database from one server to another. My situation is a little different.

  VirtualCenter Server 2.5 build 174768 has it's SQL database on another server.  We're going to retire that SQL server only and move just the DB to a new SQL Server - current vCenter server will not be affected.

  I'm trying to figure out how knowledge current vCenter once used SQL server (DCMNMSSQL02) DB is now on the server DCMSQL07 - which all on stays of DB.

  Hello.

  You must update the DSN on the server vCenter.  See the article kb 7960893 for more information.

  Good luck!

• Windows 8 will not let me move the AppData\Local folder to new drive

  All,

  I wanted to get my user account files from C drive which is a smaller SSD drive at most of my hard drive. I encountered several problems.

  A lot of trial and error, I was able to move each file of folder of the user account to an identical structure on my drive D (a "spinner"). Once I worked on all the kinks, everything worked without problems.

  However, I was unable to move the hidden AppData folder. I discovered there are three subfolders: roaming local and LocalLow. I was able to move LocalLow and roaming without problem. However, Local gave me problems.

  I discovered that the Local had some folders and files under it for which I have no permissions. Once I gained permissions for them, I thought I was on my way. The command to move the folder (using the Properties dialog box) has started working on the transition of 79 000 files. He moved all but 19 of them. He choked on all 12-15 files that have been opened and used by the system and the balance of the 19 had too long of a file name. So, I was disappointed.

  I then decided to create another administrator account and the sign of the current account and connect to the temporary administrator account that I had just created. I thought that I could then move the files because they would not be opened and used by the system. But, when I open the Properties dialog box, the LOCATION tab was gone, so I could not move the files.

  I need answers to two questions:

  • Why Microsoft would give the user a LOCATION tab with a NAVIGATION button, if it was impossible to move the AppData\Local folder?
  • Is there another way that a layman like me can change this setting? Can someone direct me to here? (Such as it is, 2 of the 3 AppData files are on drive D and 1 is always the SSD C drive.)

  Thank you.

  Matt

  OK, I fixed using a symbolic link. I moved my complete record of users. Here are the steps I used:

  • Create a folder on the "C" drive, called "this_is_c" and create a folder on the disk "D", called "this_is_d" - it is only for identification purposes in the later stages.
  • Boot from the Windows 8 Pro disc. (In other words, will not start hard drive.)
  • Do not choose 'Install now' - choose ' repair you computer.
  • Then choose troubleshooting
  • Choose Advanced Options
  • Then choose command line
  • The player that appears corresponds to the player 'X' - which is the recovery disk.
  • Type "C:" to switch to the 'C' drive
  • Type "Dir" and see if you see the folder "this_is_c".
  • If you do not, continue to change letters until you see this folder.
  • It worked that the 'C' drive during this "repair" was maybe the same as my 'C' drive when I boot normally.
  • Find the "D" drive through the same process - that is, try to find the folder "this_is_d".
  • It worked that the "D" drive during this "repair" was maybe the same as my "D" drive when I boot normally.
  • Type this command: xcopy/e/k/o/h/b c:\Users d:\Users see the next chip
  • First drive name must be the name of the drive as the "repair" attributed to your normal boot drive 'C '. The second disc should be burned as it would be during a normal boot. So, in my case, these conditions were the same. Note: use a capital 'U' for users instead of lowercase 'u' in users.
  • Type "D" when prompted.
  • Type the following command: rd /s c:\Users
  • Type this command: mklink /d c:\Users d:\Users
  • Type this command: exit
  • Continue to start.

  This will create a symbolic link that will redirect all actions to or from users on 'C' folder in the new folder users on "D". In regards to windows system knows, he is still sending the disk of 'C '. It is just redirected.

  This works perfectly for me. I installed apps and run programs without problem.

  It's a sort of understand. But it works for me.

  Matt

• Move the library file to new mac, as well as metadata

  If I had to move my library of Photos to another mac, all the metadata (faces, keywords, etc.) will come with it? Not in terms of the timing, but the library of faces real itself, etc. Is it as simple as move the photo library file to the new location or is there an official way to do this?

  Thanks as always!

  Just drag it to the new computer or transfer using a hard drive in Mac OS extended (journaled) format

  LN

• Move the file in the folder of the same name in AppleScript

  I had a problem with the script below. Basically, on the execution of the script, I want to create folders based on the name of the file and move the files in the files of autocorrelation. However, at the minute, that I'll have to choose the folder in which the script should run.

  Folder to choose a folder

  say application 'Finder '.

  located fileList to the name of every file in Folder with name extension is "m4v".

  end say

  the value point text delimiters to ".".

  Repeat with dittos in list of files

  get each text element of dittos

  masterFile defined in the point 1 of the result

  say application 'Finder '.

  create a new folder to Folder with properties {name: masterFile}

  move (each file from the folder Folder whose name contains masterFile) will cause

  end say

  end Repeat

  Ideally, I would like it to run automatically, but the folder is on an external hard drive. (\Volumes\Lacie\Movies). and I had problems to use the POSIX and 'alias' to properly re-create the path of the file desired.

  Any help would be greatly appreciated. Thank you!

  Hello

  You can try something like the AppleScript script which is a simple shell script wrapper.

  set d to (choose folder)'s POSIX path
  do shell script "/bin/bash -s <<'EOF' - " & d's quoted form & " 2>&1
  cd \"$1\" || exit
  shopt -s nullglob
  for f in *.m4v
  do
      m=${f%.*}
      [[ -d $m ]] || mkdir -p \"$m\" || continue
      mq=$(sed 's/[^[:alnum:]]/\\\\&/g' <<< \"$m\")   # quote meta characters for regex
      find -E . -depth 1 -type f -iregex '.*/'\"$mq\"'.[[:alnum:]]+$' -print0 | xargs -0 -J% mv % \"$m\"
  done
  EOF"
  

  For example, given that you choose/path/to/directory in the folder - source

  Input state:

  /path/to/directory/abc.m4v
  /path/to/directory/abc.txt
  /path/to/directory/abcd.m4v
  /path/to/directory/abcd.txt
  

  Status of the output:

  /path/to/directory/abc/abc.m4v
  /path/to/directory/abc/abc.txt
  /path/to/directory/abcd/abcd.m4v
  /path/to/directory/abcd/abcd.txt
  

  Briefly tested under OS X 10.6.8 but no guarantee of any kind. Please make sure that you have a full backup of the original files and directories before you run this kind of script.

  Good luck

  H

• Firefox 6 need to move the cache (files temporary folder) to a specific file

  Hello I need to know how to move the temporary file for firefox folder 6. I managed to do it easily for IE as it can be done from the settings tabs for firefox but, I need to access the topic: config so I understand. However after that I implemented browser.cache.disk;D:\Temporary Internet Files and browser.cache.offline;D:\Temporary Internet Files, nothing seems to happen like firefox still uses the original place

  Pref is correct browser.cache.disk.parent_directory - does not exist by default, the user needs to create.

• on the new program go/linkup can I move a file from desktop to laptop?

  You just bought the Pavilion HPE it came with GB/linkup. I put in place and wanted to move some files I have scanned my laptop. Can it be done?

  Yes, it can be done. Consult the following link which will help you to do:

  http://support.HP.com/us-en/document/c02540572

• How to move a file to the rear using the Terminal

  Hello world

  I just recently started to learn how to use the terminal in OS X I learned how to move files from one directory to another, but I don't know how to move a file back again. Here is an example:

  (I'm already in the Desktop directory) In my office, I have a folder named "music" and a file called "algo.rtf". In order to move the "algo.rtf" file in the "music" folder, I type the following command: "musica algo.rtf mv / '. That works perfectly fine, when I check, the file is now in the new folder.

  But what happens if I want to move the file "algo.rtf" which is now in "musica" on the desktop? I can't understand. I tried the following:

  'cd musica' (so now I'm in the folder where the file is) and from there I typed: "mv algo.rtf Desktop /" (but then it is said; no such directory not found)

  I understand that he says no "found" because it is looking for a folder named "Desktop" in the folder named "music" and this is why it does not work.

  But that still doesn't help me much because I still don't know how to bring it back to "Desktop". If anyone knows how to do this, I would be very happy for your response!

  Thank you.

  Use:

  MV algo.rtf...

  (140623)

• Move the files ipa

  Need help to understand the 'Mobile Applications' folder and files *.ipa.

  I'm about to upgrade my this SSD to a larger. According to Samsung SSD primary must be 20% vacuum, which is a big problem, to be able to clone the drive. Is there a way to temporarily move the Mobile Applications folder and/or all its files incl. app-files?  And then move everything back again once the new drive after swapping.

  When I see the little cloud symbol in Appstore I really feel that the applications are really located on a remote server. Is it not the case?

  PS I have a laptop Windows 7/64 pro.

  See make a library of portable split.

  TT2