Move the video folder to another drive

Similar Questions

• Move the Users folder to another drive or partition under Vista 64

  I want to move my full users folder to another drive or partition under Vista 64-bit.

  I found these instructions to do with Windows 7 and confirm that they work very well on a Windows 7 computer I set up yesterday.
  http://Lifehacker.com/5467758/move-the-users-directory-in-Windows-7
  ROBOCOPY, RMDIR, MKLINK programs all exist in Vista and have all the command line switches such as specified in section of Windows 7.
  I want to use junction points as described in the article, rather than messing around with search-and-replace in registry. The use of junction points is cleaner and easier to reverse if I ever need to move the Users back folder to its original location.
  These same instructions for Windows 7 works with Vista 64 bit to move my users folder to a different hard disk or partition?

  Well, I couldn't wait any longer for a response.

  So I gave him a test and Windows 7 instructions work perfectly with Vista 64 - bit word. Hope it will be useful to someone else.

• Change the location of the TEMP folder on another drive

  1. What are the steps (dialog) to change the files TEMP system Windows7 on drive C for one of my other drives local HHD? Now, I have only a 160 GB SSD for my boot (C - drv) and want to keep the WRITE/ERASE SPO to a minimum.

  2. is it a security risk to modify the TEMP Internet folder of the hidden/protected area on the C drive to another local HHD? I read that there are built-in virtual paths and protections on both the system and registry that tends to protect Internet files TEMP containing viruses, rootkits, etc. to easily reach areas critical. Norton likely also verifies signatures in these default fields for the TEMP files.

  Thanks in advance.

  Core i7-975 3.33 GHz, 12 GB of RAM, nVidia GTX280m, Win7 Ultimate64

  Hi Mike,.

  To change the location of the system Temp folder, follow the steps below.

  1. right click on computer and click Properties. In the window that appears with the basic information about your computer

  2. click on settings system advanced on the left panel, resulting in a dialog box click on the Advanced tab one

  3. click on the button marked down from Environment Variables.

  4. you can see listed in the TEMP and TMP variables user (account). It's common place; each different login account is assigned its own temporary location.

  5. in the Variable value box, you can specify the path to the Windows directory and many other programs use for temporary files.

  Remember and repeat this process for the TMP and TEMP.

  You'll need to restart all programs that are running for the new value to take effect. In fact, you will need to restart Windows for it to start to use the new value for its own temporary files.

  To change the location of the Temp Internet folder, follow the steps below.

  Note: That Internet Explorer moves cookies to the new folder and the old folder is deleted. In addition, the following message appears when you try to move the Temporary Internet Files folder:

  Warning: The location of your Temporary Internet Files folder will delete all your subscription data.

  1. Create a new folder to store the files. For example, if you want to store the files in a folder named Ietemp on drive D, create the following folder:

  D:\Ietemp

  For more information on how to create a folder, click Start, click Help, click the Index tab, type the new folderand then double-click the topic "folders."

  1. Start Internet Explorer.
  2. On the Tools menu, click Internet Options.
  3. On the general tab, click settings.
  4. Click move folder.
  5. Click the folder that you created in step 1.
  6. Click OK, click OK, and then click OK again.
  7. Restart your computer

  You can change the location of the temp Internet folder explore; There is no threat to the security of your computer.

  Hope this information is useful.

  Amrita M

  Microsoft Answers Support Engineer
  Visit our Microsoft answers feedback Forum and let us know what you think.

• Move the mail folder to another internal HD

  2 questions

  FIRST

  I use an SSD as a boot and I try not to fill it with files and its constant use

  Can I move my mail folder and others if necessary, the user library and place an alias pointing to the new location instead

  I know that it is impossible for the virtual memory, but what of the rest? If located same applications to start the drive others don't work...

  The SSD is the only one with a system, all the others are just for data

  My Mac is a MACPRO 4,1 2009 with 32 GB of RAM and a NVIDIA card for my second screen

  SECOND

  I tried several times to post a link on this forum using Chrome, but I could not get into the question for some reason.

  I am quite experienced with Apple software I have used their products for the Apple]]

  I had no problem with Safari instead,

  I do something wrong or this is some kind of Apple's policy?

  Thank you

  Tip: Create a lean, fast boot disk

  .

• WSSF - can you move the vod folder to another location?

  I have my server configured so that installation is on c:, and the multimedia files on d:.  First of all, I tried streaming files in the original installation location, and it worked.

  I've now moved the vod - D:\applications\ folder: and updated the FMS.ini file accordingly seek the applications on the D: folder and restarted the server.  The Administration console is to correctly identify applications VOD and LIVE on the new site, but all streams have stopped working. No idea why?

  These two variables application.xml points, which should be in your fms.ini file (they are by default). So not really sure why they are not here, unless manually removed someones.

  You can put them in your fms.ini or you can change the application.xml so instead of

  / ; ${VOD_COMMON_DIR}
  / ; ${VOD_DIR}

  you have

  / ; $d:\apps

  / ; $d:\apps

• Win7: How can I move user folder to another drive

  (with all its tentacles of registry supported)

  Related to this issue but a little different (using Win7 RC)
  I would like to move the folders from the user for all members of the family to E:\
  What is the best way?
  When I cut and paste, I am warned a bunch of system folders. In addition, I don't see the LOCATION tab when I click on properties.

  When you create a clean installation, using the combination of a system SSD drive and a conventional disc, such as a data reader, there is a way to 'move' the users folder (normally, C:\Users) and the hidden ProgramData folder (normally C:\ProgramData) for the conventional disc, or the data reader, using an answer file, or an unattend.xml file for an unattended Setup, as mentioned above.

  For a person making a unique, one-time Setup, trying to figure out how to create an answer for fully automatic, just installation file to accomplish this small one, is average, far too much trouble.  It is also not necessary.

  It is possible, during an installation of conventional and interactive disc installation or USB thumbdrive, to enter what we call, 'Mode of Audit', until the computer is called or a created user name and perform the necessary reallocation.

  (1.) a conventional facility.  If you are using an SSD, at the point the installation process where you are asked where you want to install Windows, you must use disk Options to delete all partitions on the SSD drive, before you select the SSD drive as a target.  Do not manually partition or format the drive before installation.  Windows 7 will do and must do, because Windows needs to align the logical format with the characteristics of the physical drive, and, also, Windows wants a small system partition for its own purposes.

  2.) when installation stops, waiting for you to give a user name and a computer name, the computer are not!  Press Ctrl + Shift + F3, and the computer will restart in... (wait for it!) "Audit mode '!  Basically, Windows create a disposable administrator account and log in, as this disposable administrator.  Hurt you, with regard to this temporary user survive complete the installation, but the computer works normally, and you can install the drivers and software.  Every time that the computer starts in Audit mode (you are allowed to restart), a version of Sysprep.exe GUI will pop up, offering to restart the computer in OOBE (out of box experience).  OOBE is where you were a moment before - that is to say, where you create a username and computer name and installation is complete.  Do not restart in OOBE, until you are ready to complete the installation.

  3.) he should know what drive letter (or the location of the folder) will be assigned to your disk Datadrive.  So, it's time, in audit mode, to understand this.  If you need to partition or format the datadrive, do so now.  On the Start Menu, right click on "Computer" and select Manage from the context menu, go to the computer management console.  In the management console of the computer, storage/disk management, you will find tools to change drive letters, partition, etc.

  4.) you need only a minimal answer file.  It is an xml (text file) file created in Windows System Image Manager application.  You can call what you want.  I would say: folders.xml.  Here are the contents of a folders.xml file, which is re - locate users and ProgramData to D:\

  
  
     
         
             
                  d:\Users
                  d:\ProgramData
             
         
     
     
  

  I'm going to imagine a scenario where you make this file on another computer, and transfer to the computer when the installation is done using a USB key, which, when it is connected to the computer in Audit Mode, is attributed to the extra drive letter:

  You could probably just copy the text above into Notepad and save it as a text file with the .xml extension and be good to go, as long as you wanted to use d:\Users and d:\ProgramData as your Datadrive locations.  (I used this answer file, with success; I do not guarantee that it will work for others.)

  5. to use the folders.xml, located in the root directory of your flash drive, plugged and visible under U:\ form, you must open a command prompt, access c:\windows\system32\sysprep and give this command:

  Sysprep.exe /audit /reboot /unattend:U:\folders.xml

  This will cause the reboot of the computer, but you will end up right back in Audit Mode.  As long as you're still in Audit Mode, re-location of these dossiers is not complete, because the temporary administrator useraccount still has his stuff in C:\Users and there are still a few active databases in C:\ProgramData.

  6.) now, you need to say goodbye in Audit Mode.  Remember that a graphical interface for the use of Sysprep to initialize the OOBE appears whenever you re - boot into Audit Mode.  "So after restart you 5.) you will have your chance to run it.  (If it comes to your personal computer, do check the box "Generalize" in the GUI of Sysprep).

  7.) finishing your Windows installation, create a permanent user name and giving the computer a name, etc.  When you're finally running, go get to C:\  C:\Users should have disappeared.  C:\ProgramData is probably still there, but it is normally hidden, so you won't know, until you go to Folder Options and check Show hidden files and folders.  D:\Users and D:\ProgramData (hidden) must also exist.

  8.), I like the idea of using junctions to intercept any program crazy enough to hardcode to c:\users or c:\programdata you will need to delete or move C:\ProgramData, before creating a junction to C:\ProgramData pointing to D:\ProgramData.  The command line tool, mklink, is useful here.  Open a command prompt, and then type mklink /? to get instructions.  If you want a right click GUI tool, you can check:http://schinagl.priv.at/nt/hardlinkshellext/hardlinkshellext.html

  After you create junctions, I think you could use regedit to edit the ProfileList key to the locations of origin C:\.  Folders.XML will have changed the Folderlist key, so that everything points to D:\ instead of %systemdrive%\ or C:\   I'm not sure what would be the point, but you couldn't.

  HKEY_LOCAL_MACHINE\SOFTWARE\Microsoft\Windows NT\CurrentVersion\ProfileList

• Can I move the OEM folder on my D: drive to free up space on the ssd drive?

  With 10 windows can update requiring 20 GB of space for the 64-bit version, I need to free as much space as possible on the ssd - I move the oem folder in the d: drive, at least temporarily?

  Any other clues about how to free space - all the documents/picuture on D: already move and have disabled the hibernation.

  Why don't you create the Acer erecovery support, so you can delete the OEM folder and the Acer recovery partition?

  http://Acer--UK.custhelp.com/app/answers/detail/A_ID/29925/~/use-Acer-eRecovery-Management-to-ReSTOR...

• Is it possible to move the video of a prelude to another project?

  Is it possible to move the video of a prelude to another project?

  Hi Lekepistol,

  Thank you to try prelude workflows.

  Prelude working with one project at a time. He cannot communicate between different projects. You just need to close the current project, open the other and ingest the file to use.

  Customer feedback is important for us to improve the workflow and functionality. We are working hard to implement the features desired among our products.

  Please fill out the following form with accuracy. We will discuss the suggestions.

  Feature request/Bug Report Form

  Thank you

  Mayjain

• what I do move each photo in windows movie maker or can I just move the entire folder in one step

  I have 150 photos that I want to load in Windows Vista Movie Maker. They are all in a folder. What I need to move each photo in windows movie maker or can I just move the entire folder in one step. In other words to move the entire folder and it will enter in each space and also if I use the same transition and effect, can I just do it in one step instead of indiviualizing each photo? Try to reduce the huge amount of time to make this DVD with music (dvd composeepar)

  Select a photo and type Ctrl + A to select
  Everything on the left then click on the import button.

  ... Choose a photo in the Collections
  pane and type Ctrl + A to select all, then left
  Drag the group to the timeline.

  Now... to... Storyboard...

  Select a photo and type Ctrl + A to select all...

  Reach... Video transitions...

  The Transition you want in all the pictures right click...
  In the menu... Choose... Add to storyboard table.

  You can do the same thing with effects...

  Now... Publish your project.

• Error when you try to move the cloudvolumes folder in a different data store

  OK, so I'm moving my App volume 2.10 cloudvolumes folder of datastoreA on vcenterA on datastoreB on vcenterB, because we want to separate us from our VDI of our basic infrastructure.

  We are able to access the two vcenters on the web client.

  I tried to just copy the folder datastoreA to datastoreB cloudvolumes and received the following error.

  Copy of the file object has already been deleted or has not been entirely created

  
  

  I've seen this error in Veeam before when moving virtual machines from a data store. The solution is to remove and readd the virtual machine in the inventory.

  
  

  Everyone tried to move the cloudvolumes folder?

  
  

  Any help would be appreciated.

  
  

  Thank you
  

  
  

  
  

  I would never move the folder because there are files that will always be accessible or are not in read/write mode.

  I suggest you copy the files from the 1 folder to another, or maybe add an additional data store to the manager Appvolumes and let the files (appstacks at least) copy automatically.

• Thunderbird accounts disappeared after having copied the .thunderbird folder in another folder for backup (always went after the removal of duplicates)

  Hello

  I copied the .thunderbird folder to another folder on my computer (Ubuntu on Dell Laptop) for back up, re-open Thunderbird: accounts all parties; asking me to set up an e-mail account. I deleted the duplicate folder, but Auditors have always disappeared when I restart (.thunderbird original file still in the original location).

  I tried to use the profile to find/reactivate Manager profile as suggested on the support page (creating a profile with my name instead of the random.default profile) online - but it did not work.

  I'm reasonably computer literate but not a developer/programmer normal language would be appreciated!

  Thank you.
  Adrian

  It me - confused things fixed which happened, but fortunately I have lay profile .default right in the end!

• I deleted the video folder to recycle bin. How to restore the video folder?

  Original title: deleted video folder

  I deleted the videos folder, also from the Recycle Bin. How to restore vista Brown file type record not just thanks kev.

  Hello

  Unfortunately, Windows is unable to recover the deleted data from the Recycle Bin. You have to search the Web and use third-party software that could help you recover your deleted video folder.

  WARNING OF THIRD PARTY
  Using third-party software, including hardware drivers can cause serious problems that may prevent your computer from starting properly. Microsoft cannot guarantee that problems resulting from the use of third-party software can be solved. Software using third party is at your own risk.

  Azeez Nadeem - Microsoft Support [If this post was helpful, please click the button "Vote as helpful" (green triangle). If it can help solve your problem, click on the button 'Propose as answer' or 'mark as answer '. [By proposing / marking a post as answer or useful you help others find the answer more quickly.]

• Smartphones blackBerry how to create a new folder in the video folder in the media

  Hi, I'm trying to figure out how to create a new folder in the video folder in the media. I can easily create new folders in the pictures folder, but not in the videos... Why? Thanks in advance for your help.

  well I'm sorry, I think that I have not read your emails correctly.

  The media application doesn't care about records at all. It will read the files, the tags when they are available, playlists, but it will not show the files. with the exception of the pictures.

• How can I move or move the 'Show desktop' to another location in my taskbar?

  Original title: I am running Win 7 pro - 64 bit. How can I move or move the 'show desktop' to another location in my taskbar?

  I'm running Windows 7 pro 64 bit on a Lenovo Thinkpad T520. Any suggestions on how I can move or move the 'show desktop' icon in my taskbar. Please note that this already exists on the right side of my taskbar. I would like to add it or move it to the left side.  Thank you

  The only way next to what has been offered, is if you put the taskbar on the left side of your screen instead of the lower part.

  Right-click on the taskbar and select Properties, the options are there.

• Is it possible to move the BuildCache folder?

  I am running into a problem of path of file name length in the BuildCache directory, which is currently located at "C:\Documents and Settings\ & lt; user & gt; Settings\Application Data\Thinstall\BuildCache. "I want to move it to a shorter path, but have failed.  I tried setting the env variable THINAPP_CACHE_DIR., but it had no effect.  I am running the latest version of ThinApp.  Any help is appreciated.  Thank you.

  Currently, it is not possible to move the BuildCache folder, its location is always % AppData%\Thinstall\BuildCache Local.

  I'm a little surprised that you run into a problem of path length. That means either you have a user name very long or very long file name (original path does not matter, the name of the file itself must be large enough)?