Similar Questions

• PS6210xs and PS6210x in the same pool?

  Hello. We have a hybrid of PS6210XS and two models of PS6210X in a group. They are all current firmware 8.1.4, and they are all in separate categories. The XS is running accelerated RAID6 and X models are running RAID6. Together, these models will all play in a pool despite the correct raid accelerated/no levels accelerated,?

  In addition, members use about 30 TB out of the 58 available to, but it is not evenly distributed. I know that I can not remove the default pool, but I want to put everything in one of the other pools. If I can move the Member Pool2 in Pool1 (and it doesn't look as if I had enough space in Pool1 to do), then, I can move the default pool member in Pool1 and leave default empty, correct?

  ETA: And remove Pool2 after this member is moved in Pool1, before moving the default pool member.

  Thank you.

  Hello

  First of all, you don't have to remove all of the pools.  You can always merge pools.  The change will happen immediately, but it will take time to balance the pages between members.

  I'm always careful about the fusion hybrid with other non-hybrid.  Sometimes, the hybrid is much smaller than the other members.  Especially in the case where the drives are NL - SAS.  Which tends to mitigate the benefits of the hybrid, being much more data on the NL - SAS members.

  I would like to look at SANHQ to see what the charges are of different members.

  If you decide to merge the members, I would like to start by merging the X models.  If you select a pool, there is an option "merge pools".  Then, you must select the Member that you want to add tot this pool.

  You can also open a support case and ask for help.  They can examine the data SANHQ and table diagnostics.

  Fusion of members is quite easy, it breaks the new, which can be more difficult.

  Kind regards

  Don

• Can we do "image moves with the text" the default behavior when you paste an image into a page of text?

  in a text in 'pages' document - copy - paste an image in a body of text automatically seems to do with 'image remains on the page' and 'automatic', which makes the image stays in place when later editing / adding text... so the picture does not end with the original text that belongs to it.

  Can we do the setting "Fix '-' with text Move' -' Inline with the text" setting by default, then it will automatically stick a new image without having to go through a few clicks every time?

  Thanks muchly, everyone who might have an idea

  Peter

  You can insert and to scale an image of your choice, set its object Placement and dressing of your choice and then do a placeholder image. You save then this as a model. When you create a new document based on this template, any image that you copy/paste or drag/drop on this placeholder image will now have your preferences of positioning of the object and the skin. Other that that, you cannot change the default settings of v5.6.1 Pages.

• Can I change the default settings such as the number of seconds that each picture is displayed in windows movie maker?

  Can I change the default settings such as the number of seconds that each picture is displayed in windows movie maker? Now she comes up a 7 seconds... I would like to change it to 6 seconds.

  Hello

  My friend John Papa - MVP - is the expert on Windows Movie Maker.

  PapaJohn.org
  http://Papajohn.org/

  PapaJohn - online tutorials
  http://www.Papajohn.org/mm2-online-tutorials.html

  Windows Movie Maker Tutorials - check the sounds of the addition in the left menu and others on the
  main screen.
  http://www.windowsmoviemakers.NET/tutorials/

  Windows Live Movie Maker help & how-to and Forums are good sources of information:

  Windows Live Movie Maker that works in Vista and Windows 7
  http://Windows.Microsoft.com/en-us/Windows-Live/Essentials-Help-Center?T1=T3

  Official Support of responses - Movie Maker Forums site-
  http://answers.Microsoft.com/en-us/windowslive/Forum/MovieMaker?tab=no

  ====================

  These might help:

  Getting started with Windows Movie Maker

  Import video, photos and audio on Windows Movie Maker

  Import video from a videotape

  Get a movie in Windows Movie Maker

  Make a movie quickly in Windows Movie Maker (AutoMovie)

  Publish a movie in Windows Movie Maker

  I hope this helps.

  Rob Brown - Microsoft MVP<- profile="" -="" windows="" expert="" -="" consumer="" :="" bicycle=""><- mark="" twain="" said="" it="">

• How to increase the default bit rate/band width for movi calls?

  Hi, Expert

  As the subject, don't know which is the default configuration, but the movi calls to each other in the LAN can reach only 352 * 288, with bitirate set up 314 kb/s in statistics during the call

  See picture below:

  Hi, I've tested this in our lab as soon as possible and the call flow is Jabber--> VCS - C--> C40 endpoint. Please see the model snpshot TMS Jabber, VCS - C parameters of bandwidth, connected calls rate details on C40.

  

  

  

  As stated previously, the bandwidth of Jabber for iPad has been limited to 384 Kbps maximum since that's all the current iPad hardware is capable.

• Tab is selected as the default movement?

  I have a ton of text items in my calendar. Whenever I made a setting I need to select the item, and then select the tab query effective controls and then I can move text in the program monitor.

  What would really speed things up, is if I could simply select the item in the timeline panel and then move the text elements in the program monitor (without having to select the query tab, in effect options).

  My question is, is it possible to have the query tab, in the effect options highlighted by default when an item in the timeline is selected?

  Bonus question: is he still select more than one item of overlapping text in the script (text on v1, v2, and v3 at the same time for example) and move them as a group to better screen placement?  Are we still not able to do?

  Thank you.

  Double-click the text (or image that you want to move) in the program monitor.

  Should light wired to the image and you can then move.

  About your second question, I'm not aware of how to do it.

  You can file a feature request:

  http://www.Adobe.com/products/wishform.html

  MtD

• Image change by default do not apply at the office pool View Manager 4

  When I try to change a pool of offices to change the default Image, everything seems fine. I chose the snapshot I want to use and apply without any error. However, when I restart the desktop computers in the pool, they are still on the old default Image. I can tell quite easily because that new images flash plugin but the previous does not work. Everything on view eating seems correct, it shows the correct Parent virtual machine and good Image. Is there anything else I need to do?

  Thanks for all the help!

  It is the persistence of one or a pool not persistent?

  If it is a persistent pool you must also do a recomposition (under the image) to update virtual machines, followed by a reboot, etc.

  If there is no persistent pool, just restart desktop does nothing. The new image will only be used on the new computer desk/clones. Need to remove the old desktop computers.

• How can I move the default location of my PSE catalog?

  Can I move the default location of my catalog (currently: C:\ProgramData\Adobe\Elements Organizer\Catalogs) to another drive?  It turns out that I don't have the space on the C drive to perform a migration.  I have been using PSE for some time on my Windows system (Vista) and running version 9.  I recently installed version 10 and failed to install during the migration of catalog.  I went back to 9, repaired the catalog, provided to all media was found and repeat the attempt to load to 10.

  The system configuration:

  Drive (SSD) C - 7 GB free, default program location, the catalog size 18 GB

  D drive - media location, total size 36 GB

  Drive E - desired location to the catalog

  Any other suggestions?  I'm stuck here.

  Open the catalog and use the help... System Info to see the exact location of the catalog directory.  Use Windows Explorer to copy the entire catalog directory and all of its subfolders to your desired location.  Open PSE and use the file... Catalog to open the Catalog Manager and select "Custom location" and then navigate to the new location.

  I'd do it in PSE9, and once you are unsure that the new location works perfectly, you can use Windows Explorer to remove the former location of the catalog.

  Then you can try PSE10.

  Ken

• How to change the default e-mail account

  I have 4 email accounts configured in Mail.app. When you compose a new message, it will be by default the account for the selected mailbox, which is great. However, when no particular mailbox is selected (when you view the Inbox combined for example), it is the default account. I want the default to another account.  How can I tell Mail.app account to use?

  Changing the order of the mailbox makes no difference. There is a preference that would allow me to have all new messages come from a certain account, but I don't want that. I want to its default value of the box running mailbox if it exists. I want to just change the value by default when there is no current mailbox selected.

  It is has got to be a way to do that, right?

  Mail > Preferences > accounts (select your main account) > account number > AccountType IMAP 'email address '.

  In your list of aliases move to the top of the list, your primary e-mail address.

• Addition of Google Chrome, now Safari does not open, impossible to link electronic mail links.  Just received message "Safari is closed."  Tried deleting 3rd party add ons. Is went into preferences, Safari is the default browser, but it does not open.

  Add Google Chrome, now Safari opens Cannot link e-mail links.  Just received message "Safari is closed."  Tried deleting 3rd party add ons. Is went into preferences, Safari is the default browser, but it does not open.

  Third party extension and plug-ins?

  If Safari is slow, unresponsive, which closes unexpectedly, or has other issues

  The problem may be caused by a Safari Extension, Internet plug-in or another add-on.

  The safari Extensions, Internet plug-ins, and other modules are designed to improve or customize the browsing experience. Modules are widely available on the Internet, and some are installed as part of an application or other software. If you have Add-ons installed, an add-on might be at the root of the issue.

  If the problem is the unwanted pop-up windows, advertisements and graphics while surfing on the web, discover how to remove the ad-injection (adware) from your Mac software.

  Disable the Safari Extensions

  You can disable Extensions Safari to learn if all are causing the problem.

  1. In the Safari menu, choose Preferences.
  2. Click the Extensions icon, and then select an extension from the list.
  3. Uncheck the box enable disable this extension.

  If turning off an extension solves the problem, look for updates of the extension by clicking Update in the lower left corner of the window. Or remove the extension by clicking on the button uninstall.

  Remove Internet plug-ins and other add-ons.

  You can remove Internet plug-ins and other add-ons to see if everything is the origin of the problem. To find them, quit Safari and open these folders in library:

  • The library folder at the top level of your hard drive. Open it from the Finder by choosing go > go to folder in the menu bar. Then type /Library and then click OK.
  • The record library in your home folder. Open it by organizing the Option while choosing go > library in the menu bar.

  The folders in the library contains the following folders for modules. Move all the files in these folders to the trash.

  • Internet Plug-Ins
    Do not remove the default Browser.plugin, nslQTScriptablePlugin.xpt, Composer.webplugin of Quartz or QuickTime Plugin.plugin.
  • Input methods
  • InputManagers
  • ScriptingAdditions

  If the removal of the files in these folders solves the problem, quit Safari again and gradually put the files until you find the one at the origin of the problem:

  1. Open the Recycle Bin and select one of the files that you removed. Chose file > back up. The file back to its folder.
  2. Open Safari and see if the problem returns.
     • If the issue is returned, you have identified the add-on causing the problem. Do not use or contact its manufacturer for an updated version.
     • If the question does not return, quit Safari and put back another file.

• Why Yahoo is now the default Firefox search engine?

  I'm curious to know why Mozilla decided to move the engine of Firefox default to Yahoo search, without initially to provide an explanation to users. Specifically, how does this change benefits users? »

  Hello ariel, please fill in this question. the reasons to change the default search provider in firefox are explained in https://blog.mozilla.org/blog/2014/11/19/promoting-choice-and-innovation-on-the-web/

  of course, users are free as always to set their search engine preferred as default choice: use the Firefox search bar

• How can I Zoom in other than the default %? I want to do 85% on some pages and can't get there.

  I do not like the new feature tools, like the better toolbar. I can zoom in is no longer the necessary %, is only in whole numbers of dozens. Sometimes to do between setting of to get the pages to display right and be legible. Can not know how to do this. You cannot click in the box to 100% and change it, only the + and - buttons.

  He was previously a control that allow you to dial in any size that you liked? I don't know who... he could control add-on? To see if you have still this control, you can use customization feature and optionally drag it to your toolbar.

  • button '3-bar' menu > customize

  For the function integrated + and - buttons, you can change the steps. By default, the enlargement options:

  1.1 => 110%
  1.2 => 120%
  1.33 => 133%
  1.5 => 150%
  1.7 => 170%
  2 => 200%
  2.4 => 240%
  3 => 300%
  

  The default mitigation measures are:

  .9 => 90%
  .8 => 80%
  .67 => 67%
  .5 => 50%
  .3 => 30%
  

  To add additional steps, you can modify the list in Firefox about: config preferences editor. Here's how:

  (1) in a new tab, type or paste Subject: config in the address bar and press ENTER. Click on the button promising to be careful.

  (2) in the search box that appears above the list, type or paste the zoom and make a break while the list is filtered

  (3) double-click the preference toolkit.zoomManager.zoomValues and edit it as you wish. Since it's a little difficult to read, you can copy it to a word processor or another program where you can zoom text, modify it, and then copy the revised version.

  For example, to add 85% as a step, you should insert it here:

  .3,.5,.67,.8,.85,.9,1,1.1,1.2,1.33,1.5,1.7,2,2.4,3
  

  Note #1: After having OK'ing this change, it will come into force in any new windows that you open. Existing windows/tabs seem to remember the implementation at the time you opened the. (To move a tab into a new window, click on the tab on the tab bar > move to the new window.)

  #2 Note: If the preference becomes a mess, you can right click > reset to restore the default value.

• Re: Satellite NB305 - restore the default value of my internet browser

  I don't know where to post this request.
  Took forever to find words 'post new topic' and only clicking like to respond to a thread.

  I want to return to the default value of my internet browser.
  I know where to do it. Stupid question, but I can not display OK or apply in the dialog box.

  Does not show, you use a smaller font, or try to move the dialog box does not work.
  I actually want to google by default but tried in vain several times.
  Says I do not have seplt correctly but I http: identical www.google.com/ appears on my desktopPC.

  Question 2: Bought this in the United Kingdom but I live in Australia.
  How do I set up to reflect the Aussie not UK? Guess I have now will not kknow how to find answers to this.

  Also when I log in here the grey line saying profile connection House is in middle of screen so hard ro read the words above and below.

  > I want to restore the default value of my internet browser.
  What internet browser do you use? What is MS Internet Explorer?
  Internet Explorer settings can be defined by default very easily.
  Go to tools-> Internet Options
  You will find different tabs as general, security, confidentiality, etc.
  Visit the unique tabs and you will find Reset buttons or omissions.

  In addition, you can change the display
  Here, you should check out Style-> default Style

  > Question 2: bought this in the United Kingdom, but I live in Australia.
  > How do I set up to reflect the Aussie not UK? Guess now, I don't know how to find answers to this.

  I'm afraid, that I have no idea what you want to change it...

• change the default location of the application

  I installed an SSD and put my system on it. I don't want not used for applications or documents. How can I change the default values of systems use applications and the doc in my HARD disk drive?

  If you move the Applications folder on the SSD, then this means that your applications load more slowly. Leave it where it is.

  How to use an SSD with your HARD drive If you want to use an SSD as boot with your existing HARD disk drive, as the disk 'data', here is what you can do. After installing the SSD, you need to partition and format the SSD using disc utility disc. Then install OS X on the SSD. Once installed OSX boot from SSD. Startup disk preferences to set up the SSD as the boot volume. Open the preferences users and groups. Click the lock and authenticate you. Or CTRL - RIGHT click on your username account list in the sidebar and select Advanced Options in the context menu. You will see a field called "Home dir: ' on the far right, you will see an Edit button. Click on it. In the file dialog box, navigate to the location in house now located on the HARD disk (disk HARD/users/user_name /.) Select the folder, click the Open button. Restart the computer, as shown. When the computer starts, it will now use the home located on the HARD drive folder. Another more technical method involving the Terminal and the alias is discussed in depth here: using OS X with a SSD and HDD - Matt Gemmell configuration. It's my preferred approach because I can choose which records of the House, I want to on the HARD drive and I don't want to. For example, I like to keep Documents and library files on the SSD because I frequently access their content. Make sure that you keep the bootable system entirely on your HARD drive where you need it.

• Windows move to the main screen when sleeping Satellite-S50T-B

  Satellite S50T-B, Windows 8.1. Whenever my laptop sleeps, it moves all the icons and windows open on the secondary external monitor on the laptop monitor. Like a lover double screen, it's extremely annoying. I keep having to set up my work space.

  I expect that there is a bug in the video driver, which means that she sees the monitor off as a result of the command 'sleep' of the laptop as a monitor "unplugged" and it is reported to the operating system for the operating system moves all the icons and windows on the main screen, so when I turn again, they are all in the wrong place.

  Please note that the disappearance of the screen as a direct result of it being sent a sleep command should not be interpreted in any way other than the monitor to sleep as said.

  The graphics driver is old way... When can we expect an update?
  When I can see a fix for this frustrating problem?

  Hello

  If you would google for this problem, you will find a lot of discussions and information about this system.

  From my point of few this issue is linked to the State in sleep mode. There are the States of sleep mode (S0, S1, S2, S3, S4)

  S3 is generally the default standby mode, while the S4 is generally the mode of hibernation by default.
  Here all the details:
  http://msdn.Microsoft.com/en-us/library/Windows/hardware/ff564575

  You can use the PowerCfg command to change these settings
  http://TechNet.Microsoft.com/en-us/library/cc748940%28V=WS.10%29.aspx