Movement of the taskbar to a different location on the desktop

Similar Questions

• How can I MOVE buttons on taskbar to a new location without having to close all programs and resume in the order I want?

  I like to keep the buttons in my taskbar has organized with the browser and messaging on the left, followed by Windows Explorer and other items. If they get out of order or programs are loaded into a different order, how can I MOVE the buttons to a new location without having to close all programs and resume in the order I want? In addition, sometimes, one of program buttons seems in itself to migrate out of place and I need to get back to where it should be: same problem.

  Hi shohareZohre

  Thank you for using the Microsoft Answers Forums!

  The task bar is the horizontal bar at the bottom of your screen time. In contrast to the office, which can get obscured by the windows on top of it, the taskbar are visible nearly all the time. It includes four main sections:

  ·         The Start button, which opens the start menu.

  ·         The Quick Launch bar, which allows you to start programs with a single click.

  ·         The middle section, which shows you what programs and documents you have open and allows you to quickly switch between them.

  ·         The notification area, which includes a clock and icons (small pictures) that communicate the status of certain programs and computer settings.

  Add or remove programs on the Quick Launch toolbar

  The Quick Launch toolbar is located on the task bar and is a convenient way to open programs. You can add or remove program icons in the Quick Launch toolbar so that you have easy access to the programs that you use frequently.

  To add a program icon to the Quick Launch toolbar

  Click the icon for the program to add (you can find most icons of programs on the start menu or the desktop) and then drag it to the Quick Launch toolbar.

  Note: If you don't see the toolbar tools quick launch, right-click on an empty area of the taskbar, click Toolbars, and then click quick launch.

  To remove a program to the Quick Launch toolbar icon

  Right-click on the icon of the program and then click Remove.

  Notes: ·         Delete an icon from the taskbar does not remove its corresponding computer program.

  ·         If you want to stop showing a toolbar on the taskbar, right-click an empty area of the taskbar, point to toolbars, and then click the item that you want to stop broadcasting.

  NOTE: The ability to move the programs in the taskbar is not possible in windows Vista but the same functionality is available in Windows 7. Please see the link below.

  http://www.Microsoft.com/Windows/Windows-7/features/Windows-taskbar.aspxand

  Check out these links for more information:

  http://support.Microsoft.com/default.aspx/KB/253679

  http://Windows.Microsoft.com/en-us/Windows-Vista/add-or-remove-programs-on-the-Quick-Launch-toolbar

  http://Windows.Microsoft.com/en-us/Windows-Vista/show-or-hide-icons-in-the-taskbar

  Hope this information was useful.

  Let me know if it worked.

  All the best!

  Thank you and best regards,

  R uma - Microsoft technical support.

  Visit our Microsoft answers feedback Forum and let us know what you think.

• Physically, move a server blade in a different location - best practices?

  Hello

  Is there a best practice to move a physical blade to another location?  I can't find a document about it.

  We want to move a slide to another location due to keep grouped similar environments but do not want to disassociate the profile.

  Can we just unassign, and then take it out and put in another location and let it automatically reactivate.  The profile will remain with the server?

  You say - associate profile and then re - associate profile again?

  Thank you

  A

  Hi Adrien,.

  Thank you for poining, I guess I wrote too soon.

  Yes it takes the decomission.

  Here are the steps to update:

  (1) shut down the operating system on the blade,

  (2) Disassocite the service profile, wait dissociate it in full (check the status on the WSF of the blade tab)

  (3) Decomission the blade of the UCSM (check the status on the tab of the WSF for the process)

  (4) to remove the blade from the current location,

  (5) move the blade into the slot again.

  (6) wait for blade to discover fully (even once, check the condition of the WSF of the blade tab), you may be required to validate / recognize the slot to accept the blade and trigger the discovery.

  7) once discovered associated with the profile back

  (8) start the dos operating system.

  I would check the documents and let you know.

  . / Afonso

• You can move the inserted text to a different location on the picture, if yes how?  How can I put the character and the Panel clause up in the photo shop when you type test?

  You can move the inserted text to a different location on the picture, if yes how?  How can I put the character and the Panel clause up in the photo shop when you type test?

  Yes.  I find it easier to type text, and then use the move tool (shortcut V) (looks like an arrow) to place it where you want.

  To bring up the character and paragraph panels go to WINDOW > CHARACTER or WINDOW > PARAGRAPH.

  I hope this helps.

• Cannot move the shortcut on my desktop icons to different locations on the desktop

  I can't move my shortcut icons on my desktop.  Think it has something to do with function self-centring - how to fix this?

  Right click on the desktop, click view and uncheck Auto Arrange icons. Ramesh Srinivasan . The Winhelponline Blog
  Microsoft MVP, Windows desktop experience

• The same drive letter may point to different locations for different processes?

  The same drive letter may point to different locations for different processes?

  Our users have the E: drive mapped to one place. But I need a scheduled task in order to use the E: drive to point to a different location at the same time, without affecting the mapping of moose for logged in users.

  There is no work around this need of ours. This is because users are working 24 X 7 update of our data files on the E: drive, and a log file is made. We plan prevent users for a minute every night while move us / save the log file and then allow users of the resume and allow a new log file to create. Then take the saved log file and apply it to a real set of monthly backup of data files, so the backup files will be ready for a recovery after disaster. The program that applies the transactions recorded in the data files is able to apply operations to files that are considered as being in the same exact location.

  I know that's not possible without resorting to the application logs a set of files on a completely different machine. But I ask.

  Thank you

  Dan

  Hello

  The question you posted would be better supported in the TechNet Forums. I suggest you to ask your question in the TechNet Forums.

  http://social.technet.Microsoft.com/forums/en-us/w7itpronetworking/threads

  I hope that helps!

• Windows Movie Maker cannot publish the movie to the specified location

  From: patiotaiza

  Message: I have a 5-minute project and trying to publish it on my PC I get the following message:

  "Windows Movie Maker cannot publish the movie to the specified location. Verify that the original source files used in your movie are still available, that the publishing location is still available, that there is enough available disk space, and then try again. »

  I have enough space available in my PC (8 GB on the left), search for the missing files and they are all OK, tried several different locations, editing... and it still doesn't work. I'm sad, can someone help me please?

  Thank you!

  De : John Inzer

  You may have some incompatibility issues with your source files. Take a look at the following articles:

  Movie Maker 2 - problem solving - "cannot record a movie.

  http://tinyurl.com/yjvztz

  or

  http://www.Papajohn.org/mm2-issues-CantSaveMovie.html

  Type of file with Movie Maker compatibility

  http://tinyurl.com/v8tee

  or...

  http://www.myvideoproblems.com/tutorials/MovieMaker/File_type_compatibility.htm

  What file type should I use in Movie Maker?

  http://tinyurl.com/6n66g3

  or...

  http://www.myvideoproblems.com/tutorials/MovieMaker/WhichFileTypeInMovieMaker.htm

  John Inzer

  MS Digital Media MVP

  View

  This isn't a technical support

  I'm a volunteer

  Solutions that work for

  me I work for you

  Proceed at your own risk

  Another response of the community of Windows Vista discussion groups

• I have five Airport extreme with their network of people names different location home.  I have a brighthouse router that I use to connect to all the extremes of the airport.  I experienced the problem of connection to the internet.

  I have five airport extreme, with their network of people of names in a different location in the House.  I have a brighthouse router that I use to connect to all the extremes of the airport.  I experienced the problem of connection to the internet.

  Are all connected to the Brighthouse router by Ethernet extremes? Are all of the extremes configured as bridges?

• can I use 2 Mac Pro, the old and the other from different locations with the same apple ID?

  can I use 2 Mac Pro, the old and the other from different locations with the same apple ID?

  Yes. The only problem that I see if Macs were different countries. The method of payment in the account/ID must be associated with the country where the unit is located and you can only buy Apps from the store of the country where the computers are located

• PCI-7730 does not move in the order of driving different directions?

  I have a 7330 motion control card that I'm driving a shaft on both (so never 1 d moves). I need to be able to move in both directions, which is fairly easy to do using a change (modified to include the limits and home) example VI (I think it was the example of 1 d linear motion). To effectively run my stepper motor for my application, in step/direction mode, when moving to the direction of stage negative (for me it is the 'Blue' in my dye laser) I need to overshoot and then come back so that the engine always ends with a movement from the red. I tried several solutions to this problem, including:

  1. in a VI copy/paste on the screws under necessary motion in order, but specify a 'number of steps to move' for the second piece

  2. call the same Subvi sequentially (so rather than a long VI a VI with calls to conduct main proposal sub - VI) with various implementations of delays and sequencing

  The problems I encounter are:

  When using a single move VI (then go one direction up to the complete removal), I can almost always move properly, be it positive or negative direction. Occasionally, and especially when you try to go in a different direction than the previous move, the engine is not. I can watch it on my oscilloscope monitoring steps returned by the engine. The stages of start-up, but about 4 pulses in the VI closes with no error reported (and with the release of that word because, it seems that the program thinks that the move is successful). However, when you use the VI that he calls one way and then the other, I can * never * get the second move (the opposite of the direction) to happen. In 20 years, I even put delays between them in a structure of flat sequence without result. However, I can move one direction, and then immediately the same direction successfully with the same code.

  I can't find a 'free channel' or the ability to set regardless of the behavior of management (for example, direction set out to a negative displacement before the negative move, then reset for a positive move before the move is necessary in fact). It is quite possible, Miss me a crucial part in my VI main motion, but then I think that the repeated movements of single direction would fail more frequently.

  Is there a way to define the direction prior to a move? Or has anyone else encountered this problem and found a solution more "elegant"?

  Thank you!

  A. Berke

  Note: in order to generate enough current to power my motor (it has optically entered remote), I added my own resistance to the stage and the wiring of the direction as they head towards the engine.

  I solved this in case someone else has a similar problem. It turns out that he should be careful with the card ID. It can only be called once (so multiple calls to secondary screws using the same ID Board in a "main" program does not work unless the ID is passed to higher level) in a program.

• How can I prevent the desktop icons move arround whenever a different profile is open?

  We have windows vista with 2 user profiles that are the main ones used.

  How can I add/remove/move the desktop icons on my profile without moving/remove on the profile of other people?

  What is the point of having 2 different profiles, so everything I do on my effects profile profile of others?

  also is it possible to add/remove programs (games, downloads) without doing the same for the other profile of people?

  Hi JexterMaxim,

  1. what type of user accounts that you use?
  2. don't you log on as an administrator?
  3. don't you make changes to the agreement of the issue occur?

  When you install a program, you will need to select the installation option in particular only to user accounts. Not in user accounts. You can try the following steps.

  Desktop shortcuts are stored in one of two places:
  (a) in c:\Users\Public\Desktop. These shortcuts are shared and are visible to the user ever.
  (b) in c:\Users\UserName\Desktop. These shortcuts are not shared and are visible to the user.

  When you right click on a shortcut, and then click general, then you can see where this particular shortcut is stored.

  To make a shortcut of the group a) visible to yourself, do this method:
  a. drag the shortcut to the side with the right button of the mouse.
  b. Select "copy". You have now two seemingly identical shortcuts.
  c. delete the original shortcut.

• Movie Maker error: cannot save the movie to the specified location.

  When I wanted to save my movie on my computer, I received an error at 0%, it is said:

  "Windows Movie Maker cannot save the movie to the specified location. Verify that the original source files used in your movie are still available, that the backup location is still available, and that there is enough available disk space, and then try again. »

  There is nothing about it, I even 20 GB of free space, the video is only 1.24 MB. and files original source is always available.

  Someone HELP me please! I use Windows Vista Home Basic.

  original title: Windows Movie Maker 2.6 problems during the recording of movie files

  There are to many free converters that you can
  downloaded on the net, but for a few
  MP3 files... There are free converters online.

  The following site may be worth a try:

  Convert online
  http://www.online-convert.com/

  Open the drop window in the field of Audio Converter.

  Select... WMA

  In the next screen, left click on the Browse button and
  Navigate to the MP3 you want to convert

  Left, click Convert.

  When the file is converted will prompt you to
  download it.

• Everything was fine until my Windows 10, lost the start feature, if I ever go back to Windows 7, in this process, I lost my Adobe Reader software, I tried about ten times with different versions and different locations, all with the same download error

  Please forgive me for not knowing how to use this forum, I am an old man and not good at computers, I called Adobe, they said it was my only hope!

  Sorry to repeat

  Everything was fine until my Windows 10, lost the start feature, so I had to go back to Windows 7, in this process, I lost my Adobe Reader software, I tried about ten times with different versions and different locations, all with the same error message that is download "the feature you are trying to use is on an unavailable network resource"... are looking for It seems that it does not find when I search there, and I no longer seem to have the AcroRead.msi... the most difficult file, I try, I get deeper and deeper into things I don't know... I am looking for a simple solution!

  When it gets to this point, it is probably better to start from scratch.

  First of all, download, install and run Adobe Reader cleaning tool to get rid of all remains little. Here is a link to the tool: Download Adobe Reader and Acrobat tool - Adobe Labs

  Then go to the following link to download the full installer for the reader.

  https://get.Adobe.com/reader/Enterprise/

• How can I upgrade my property in the cloud? I'm now 20 giga, because I work on different locations, I need more, but I can't find any upgradeplan

  How can I upgrade my property in the cloud? I'm now 20 giga, because I work on different locations, I need more, but I can't find any upgradeplan

  You need go to a TEAM account, which has 100Gig

  - https://creative.adobe.com/plans?plan=team team plans

  -http://www.adobe.com/creativecloud/buy/business.html

  -https://helpx.adobe.com/contact/creative-cloud-teams.html using the team

  -manage your account http://forums.adobe.com/thread/1460939?tstart=0 team

• Move materials project to a different location?

  Is it possible to move all project documents to another location on the computer? I sometimes use video and audio directly from the desktop, but when I finished my project I want to move my files to an external drive, but as you know used Premiere Pro can find the files then, is it possible to pack everything to another drive? The function is called 'pack Materials project' to Powerdirector.

  Take a look in the project manager.