For Cloud SGD LDAP authentication for users and administrators

Similar Questions

• option on the general tab is different for users and administrators

  I run under a user account and noticed that the general tab, under options is different then when I run under administrator. There is no tabs under general on behalf of user network, update, encryption. Before the recent update I thought these tabs available when running as a user? I'm wrong, things have changed or get a Firefox error?

  In the address bar, type Subject: preferences #advanced< enter >

• I want to connect to a computer laptop win 7 with a xp pc, but she keep asking for user and pass?

  I want to connect to a computer laptop win 7 with a xp pc, but she keep asking for user and pass?

  Hi Maysambagheri,

  The description of the problem seems a little unclear and I wish I had a better understanding before you start working on it. I would really appreciate if you could answer the following questions:

  1. how you try to connect with two computers?

  2. What is the error message that is accurate or complete?

  3. do not connect you to your Windows 7 laptop as administrator?

  4. have you made any recent hardware or exchange of software on your computer before the show?

  Please provide us with more information on the specific question to help you to fix as soon as possible.

  For reference:

  Networking of computers running different versions of Windows:

  http://Windows.Microsoft.com/en-us/Windows7/networking-home-computers-running-different-versions-of-Windows

  Your response is very important for us to ensure a proper resolution. Please get back to us with the information above to help you accordingly.

• Security ADF of application using DB tables for users and roles

  Hello
  I followed the below documents to use SQL authentication instead of jazn.
  
  http://Biemond.blogspot.com/2008/12/using-database-tables-as-authentication.html
  
  
  http://Biemond.blogspot.com/2008/12/using-WebLogic-provider-as.html
  
  The second paper after completing the ADF Security Assistant, there are steps to create roles and application below at point
  
  * "We need to use myrealm as Kingdom and not jazn.com. Create the role of valid users. "
  
  Could someone suggest where to put these roles?
  
  Thanks in advance!
  Vinod

  Hi Vinod,

  If you set up SQLAuthenticator in the JDeveloper's integrated Weblogic Server, so what happened to your case is expected, because you deleted the Weblogic instance where SQLAuthenticator has been configured. Yes, you have deleted the domaine_par_defaut instance that is located in the directory specified above. JDeveloper will recreate a new instance (not configured) the next time you run.

  To avoid reconfiguring SQLAuthenticator, you must set it up on a stand-alone instance of Weblogic (which is not located on the JDeveloper/systems user... folder.

  Kind regards

  Pino

• Installer of creative cloud rejects the name of user and password! Help, please!

  Well, so I downloaded the free trial version for Adobe Photoshop CC which is Adobe Creative cloud on my iMac Apple (OS X Yosemite) and then he tells me to double click on "Creative Cloud Installer", so I did. Creative cloud Setup opens and says "Creative Cloud Installer wants to make changes. Type your password to allow this. "So, I listened to the text and typed in my good username I use on Adobe and my good password that I use on Adobe. I left clicked on "OK" to apply, but it won't let me and give this jerk Animation who pointed out that the user name or password that I just typed is incorrect. I changed my password of atleast 3 times so far here, and still no luck...! For the last three days, it did not work. I looked on Safari for Solutions to this problem and follow the Instructions, but still does not work! (It's probably a not common problem) I've tried EVERYTHING. The Info is all is correct, I do not understand... I use this exact Info for Log-in on the official Adobe site, and it works every time... I even reset my password and make new ones, it still works for the Log-in on the site, but why it does not work on the installer of creative cloud...? ! I'm so confused right now, I've changed my password of at least 7 times now, I don't have any Plan for Adobe/Creative Cloud, what is the problem...? Y at - it something I do wrong...? Please help me, I am so depressed right now, I really want to use Adobe Photoshop CC...

  Hello

  As you try to install, please use your Mac administrator password.

  I hope this works!

• LDAP managed to users and groups

  I hope it's an easy question.  I need clarification on how connected ldap groups and users work to vCloud Director.

  If I import a LDAP group in an organization, this group has no users when I look at its properties.

  If I import a LDAP user in the same organization, which is located in the group I just added, then this user appears in the list of users in the group properties.

  I have to manually add each user in this group?  If so, why bother with groups?

  Additional information:

  I use Active Directory.

  The group contains users in Active Directory.

  The group is a Domain Local security group.

  When you import a group, it does matter not all users in vCloud.

  If a group is imported, the membership is validated when the user connects to the vCLoud site... then automatically imported as required (successful validation of membership + references).

  That's why you see the 'group' being present, but no users.

  Try to import the group, and then sign in as a member of the group.

  Observe.

  =)

  Best regards

  Jon Hemming

• Responsibility to allow only for user password resets (for personal help from the front desk)

  Hi all
  
  Someone managed to create a responsibility to allow only the password resets? The idea is to assign this responsibility to our office staff help password reset requests. They will not have the opportunity to do anything outside of search for users, and then reset the password. This would allow a large number of the number of tickets to be processed directly by our help desk staff.
  
  Any information would be greatly appreciated.

  Hello

  Create a custom liability (similar to the system administrator), which only has the (security > user > set) screen.

  Why don't you use reset them password 'features' "that comes with the application? See (Note: 399766,1 - FAQ of the Reset password feature) and (Note: 763352.1 - how to set "password forgotten"to work without treatment in 11i?) For more details.

  Kind regards
  Hussein

• Portege R500 - cannot remove the password user and supervisor

  Hoping someone can help me with a problem,

  I voluntarily put a password for user and supervisor on one of our Portege R500.
  I know what the password is, but I just want to remove so that I am not prompted for the password whenever the laptop is turned on.

  I seem to be unable to disable this feature, which is a problem that the laptop is about to be reassigned to a differnet use that would be impractical for users to have to put a password on startup.

  He must have a way to disable the password requirement.

  Of course, you can disable this password. Just use the same way you used to.
  It can be done using Toshiba Assist > Secure. You used this way to get into these options, you?

• Change the attributes of the user and configuration of resources

  Hello
  
  For the first look, I have a simple question. Where can I see changing attributes of the user and information about the history that did? I can see a upa_fields of the table, but there is no information on directors who did it.
  And the same question on resources. I need to get a way how to display information on the directors who provided resources for different users and administrators who have made changes in these resources. Y at - it all tables that can help me in it?
  Is there other variants of this information?
  
  I use OIM 11 g R1.
  
  Thank you.

  If you need only to know which revoked a resource, you can use this:

  Select usr.usr_login, obj.obj_name, ost.ost_status, rev.usr_login 'Revoker.
  Ouedraogo, usr, obi, obj, ost, usr rev
  where oiu.usr_key = usr.usr_key
  and oiu.obi_key = obi.obi_key
  and obi.obj_key = obj.obj_key
  and oiu.ost_key = ost.ost_key
  and oiu.oiu_updateby = rev.usr_key
  and ost.ost_status = 'revoked '.

  -Kevin

• ERROR: No session file or name of user and password provided

  Hey guys,.

  I wrote (tried) to create a script that counts my CPU, carrots, son of my vcenter.

  I get the following error message "ERROR: no session file or name of user and password provided.

  My Code:

  #! / usr/bin/perl - w

  use warnings;

  use VMware::VIRuntime;

  use VMware::VILib;

  1. to connect to the server and connection

  Util::Connect();

  My $cpucount = 0;

  My $corecount = 0;

  My $threadcount = 0;

  1. Get all the hosts to the group title

  My $host_view = Vim::find_entity_views (view_type = & gt; "HostSystem',);

  {foreach (@$host_view)}

  Print "hostname:", $_ - & gt; name, "\n";

  Print "CPUs:", $_ - & gt; hardware - & gt; cpuInfo - & gt; numCpuPackages, "\n";

  $cpucount = $cpucount + $_ - & gt; hardware - & gt; cpuInfo - & gt; numCpuPackages;

  Print "CPU cores:", $_ - & gt; hardware - & gt; cpuInfo - & gt; numCpuCores, "\n";

  $corecount = $corecount + $_ - & gt; hardware - & gt; cpuInfo - & gt; numCpuCores;

  Print "CPU Threads:", $_ - & gt; hardware - & gt; cpuInfo - & gt; numCpuThreads, "\n";

  $threadcount = $threadcount + $_ - & gt; hardware - & gt; cpuInfo - & gt; numCpuThreads;

  Print "\n";

  }

  Print "Summary: \n";

  Print "CPUs:", $cpucount, "\n";

  print ' Cores: ", $corecount,"\n ";

  Print "Threads:", $threadcount, "\n";

  1. close the connection to the server

  Util::Disconnect();

  You are missing your credentials section to collect the user name and password and I guess that by default to waiting for you provides a session file that includes the user name and password. Take a look at one of the sample scripts vCLI, you'll want to add the following:

  Opts::parse();
  Opts::validate();
  Util::connect();
  

  This will force the script to validate for - server, - username and password - if you have not already specified.

  =========================================================================

  William Lam

  VMware vExpert 2009,2010

  VMware scripts and resources at: http://www.virtuallyghetto.com/

  Twitter: @lamw

  repository scripts vGhetto

  Introduction to the vMA (tips/tricks)

  Getting started with vSphere SDK for Perl

  VMware Code Central - Scripts/code samples for developers and administrators

  VMware developer community

  If you find this information useful, please give points to "correct" or "useful".

• Separation of monitor only and Admin for Cisco ASDM (ASA) access for users authenticated via LDAP

  Hello

  We have two groups of ads on network Admins, one for the system administrators group. The network Admins will get Priv lvl 15 the other Priv lvl 3.

  This is the setup I use:

  TestASA # sh run ldap-attribute-map of test4
  Comment by card privileged-level name
  map-value comment fw - ro 5
  map-value comment fw - rw 15
  memberOf IETF Radius-Service-Type card name
  map-value memberOf "cn = s-FW-Admin, OR = security groups, DC = 802101, DC = local" 6
  map-value memberOf "cn = s-fw-ro, OR = security groups, DC = 802101, DC = local" 5

  The user in both groups can connect ssh and asdm but all users get the same rights priv lvl 15.

  Someone at - it an idea?

  You must visit the listed link below to configure ASA to only read access and access admin. not sure, if you have already been there.

  https://supportforums.Cisco.com/docs/doc-33843

  ~ BR
  Jatin kone

  * Does the rate of useful messages *.

• Hi I'm window7 user, I bought a creative cloud for students and teachers. but all the downloadable test app. That's why I tried 'buy now' button, "that assign the right to use" CC redownloading but "unlicensed" pop up. Help me.

  Hi I'm window7 user, I bought a creative cloud for students and teachers. but all the downloadable test app. That's why I tried 'buy now' button, "that assign the right to use" CC redownloading but "unlicensed" pop up. Help me.

  Hi decoen,.

  Your subscription is activate kindly try to disconnect from Creative Cloud app and reconnect.

  Please consult Creative Cloud applications unexpectedly back in the test mode. CCM, CS6

  Troubleshooting FAQ: What should I do if I have a subscription, but my application acts as if I had a trial?

  It could be useful!

  Rayyan

• Authentication failed for users of the AD and work for users of OID using OAM 11 G

  Hi all
  
  
  I have deployed an Application in OSH where the doors of the web are installed. In OAM 11 G, I created the Userid as OVD store and created policies for that. and I was able to protect the application.
  
  But authentication works very well for users of the OID. But does not not for users of the AD (saying ID user and password are incorrect)
  
  Part of the OID, AD with TPM. but the AD authentication does not work.
  
  
  could someone help me with this.
  
  
  
  Thank you
  Kiran

  Hi Kiran,

  Check that the name attribute of such user as defined in the Data Source is mapped in TPM attribute AD that you plan to hold the user name. Perhaps, it is use usrprincipalname instead of the samaccountname, or something like that? The oam_server1 - diagnostic.log, or newspapers OVD, may give more clues as to which is the problem.

  Kind regards
  Colin

• AnyConnect user using the user certificate authentication and LDAP authentication

  Hello

  I'm trying to implement the Anyconnect VPN for my office. Now, I want the user to authenticate the user certificate based (which is install user local system are we) CN value and LDAP authentication. A help how to achieve this requirement. We install Certificate ROOT and INTERMEDIATE Godaddy and even already installed ASA. Also, we have the user certificate installed on each system user to authenticate the user.

  Any help please.

  Hi subhasisdutta,

  This link will certainly help you with the configuration:

  http://www.Cisco.com/c/en/us/support/docs/security/AnyConnect-secure-mob...

  Hope this info helps!

  Note If you help!

  -JP-

• WebLogic with problem supplier Active Directory Authentication: &lt; DN for user...: null &gt;

  I have a java application (SSO via SAML2) using Weblogic as an identity provider. Everything works fine using created users directly in Weblogic. However, I need to add support for Active Directory. Thus, according to the documents:

  -J' set an Active Directory authentication provider

  -changed it's order in the list of authentication providers so that it is first

  -l' control indicator value SUFFICIENT and configured the specific provider; Here's the part concerned in the config.xml file:

  <sec:authentication-provider xsi:type="wls:active-directory-authenticatorType">
          <sec:name>MyOwnADAuthenticator</sec:name>
          <sec:control-flag>SUFFICIENT</sec:control-flag>
          <wls:propagate-cause-for-login-exception>true</wls:propagate-cause-for-login-exception>
          <wls:host>10.20.150.4</wls:host>
          <wls:port>5000</wls:port>
          <wls:ssl-enabled>false</wls:ssl-enabled>
          <wls:principal>CN=tadmin,CN=wl,DC=at,DC=com</wls:principal>
          <wls:user-base-dn>CN=wl,DC=at,DC=com</wls:user-base-dn>
          <wls:credential-encrypted>{AES}deleted</wls:credential-encrypted>
          <wls:cache-enabled>false</wls:cache-enabled>
          <wls:group-base-dn>CN=wl,DC=at,DC=com</wls:group-base-dn>
  </sec:authentication-provider>
  
  
  

  I configured an instance of AD LDS (Active Directory Lightweight Directory Services) on a Windows Server 2008 R2. I created the users and a user admin "tadmin" that has been added to the members directors. I've also made sure to set the msDS-UserAccountDisabled property.

  After the restart Weblogic, I see that users and groups in AD LDS are properly recovered in Weblogic. But, when I try to connect to my application using Username:tadmin and the password: <>... it doesn't.

  Here's what I see in the log file:

  <BEA-000000> <LDAP Atn Login username: tadmin>
  <BEA-000000> <authenticate user:tadmin>
  <BEA-000000> <getConnection return conn:LDAPConnection {ldaps://10.20.150.4:5000 ldapVersion:3 bindDN:"CN=tadmin,CN=wl,DC=at,DC=com"}>
  <BEA-000000> <getDNForUser search("CN=wl,DC=at,DC=com", "(&(&(cn=tadmin)(objectclass=user))(!(userAccountControl:1.2.840.113556.1.4.803:=2)))", base DN & below)>
  <BEA-000000> <DN for user tadmin: null>
  <BEA-000000> <returnConnection conn:LDAPConnection {ldaps://10.20.150.4:5000 ldapVersion:3 bindDN:"CN=tadmin,CN=wl,DC=at,DC=com"}>
  <BEA-000000> <getConnection return conn:LDAPConnection {ldaps://10.20.150.4:5000 ldapVersion:3 bindDN:"CN=tadmin,CN=wl,DC=at,DC=com"}>
  <BEA-000000> <getDNForUser search("CN=wl,DC=at,DC=com", "(&(&(cn=tadmin)(objectclass=user))(!(userAccountControl:1.2.840.113556.1.4.803:=2)))", base DN & below)>
  <BEA-000000> <DN for user tadmin: null>
  <BEA-000000> <returnConnection conn:LDAPConnection {ldaps://10.20.150.4:5000 ldapVersion:3 bindDN:"CN=tadmin,CN=wl,DC=at,DC=com"}>
  <BEA-000000> <javax.security.auth.login.FailedLoginException: [Security:090302]Authentication Failed: User tadmin denied
    at weblogic.security.providers.authentication.LDAPAtnLoginModuleImpl.login(LDAPAtnLoginModuleImpl.java:229)
    at com.bea.common.security.internal.service.LoginModuleWrapper$1.run(LoginModuleWrapper.java:110)
  
  
  

  So, I tried to watch why did I: < DN for user tadmin: null >. The Apache Directory Studio I have reproduced the ldap search request used in Weblogic, and of course, I get no results. But, change filter only "(& (cn = tadmin)(objectclass=user))" (NOTICE, no userAccountControl), it works; Here is the result of Apache Directory Studio:

  #!SEARCH REQUEST (145) OK
  #!CONNECTION ldap://10.20.150.4:5000
  #!DATE 2014-01-23T14:52:09.324
  # LDAP URL     : ldap://10.20.150.4:5000/CN=wl,DC=at,DC=com?objectClass?sub?(&(cn=tadmin)(objectclass=user))
  # command line : ldapsearch -H ldap://10.20.150.4:5000 -x -D "[email protected]" -W -b "CN=wl,DC=at,DC=com" -s sub -a always -z 1000 "(&(cn=tadmin)(objectclass=user))" "objectClass"
  # baseObject   : CN=wl,DC=at,DC=com
  # scope        : wholeSubtree (2)
  # derefAliases : derefAlways (3)
  # sizeLimit    : 1000
  # timeLimit    : 0
  # typesOnly    : False
  # filter       : (&(cn=tadmin)(objectclass=user))
  # attributes   : objectClass
  
  
  #!SEARCH RESULT DONE (145) OK
  #!CONNECTION ldap://10.20.150.4:5000
  #!DATE 2014-01-23T14:52:09.356
  # numEntries : 1
  
  
  

  (the "[email protected]" is defined as userPrincipalName in the tadmin on AD LDS user)

  As you can see, ' numEntries #: 1 "(and I can see as a result the entry ' CN = tadmin, CN = wl, DC = in, DC = com ' in Apache Directory Studio interface); If I add the userAccountControl filter I get 0.

  I read the AD LDS does not use userAccountControl but "uses several individual attributes to store the information contained in the userAccountControl attribute flags"; Among these attributes is msDS-UserAccountDisabled, which, as I said, I already have the value FALSE.

  So, my question is, how do I run? Why do I get "< DN for user tadmin: null >"? What is the userAccountControl? If this is the case, should I do a different configuration on my AD LDS? Or, how can I get rid of the userAccountControl filter into Weblogic?

  I don't seem to find the configuration files or in the interface: I don't have that "user of the name filter: (& (cn = %u)(objectclass=user))", there is no userAccountControl.»

  Another difference is that, even if in Weblogic, I put compatible ssl false flag, the newspaper I see ldaps and ldap, I noticed (I don't mean to install something ready for production and I don't want SSL for the moment).

  Here are some other things I tried, but doesn't change anything:

  -other attributes '-FS' were not resolved, so I tried their initialization to a value

  -J' tried other users defined in AD LDS, not tadmin

  -in Weblogic, I added users who were imported from AD LDS into the policies and roles > Kingdom roles > Global roles > roles > Admin

  -J' removed all occurrences of userAccountControl I found xml files in Weblogic (schema.ms.xml, schema.msad2003.xml)

  Any thoughts?

  Thank you.

  In the case of some other poor soul will fall on this issue: I did this job by configuring a generic ldap authenticator.

  See also:

  Re: could not connect to the WLS console with the user of the directory