Movie Clip tinting

Similar Questions

• Images of iPod touch - volume of the .mov clips

  Hello

  When I use an iPod touch pictures, the .mov clips sound volume is too low, even if I turn as hard as possible in Final Cut. How can I get stronger?

  Thank you!

  Unfortunately, it really isn't that you can do. You could make a new project and put just the clips that need to be more strong in there, then set volume as loud as it goes, then export than as a video, and then import that new video in your regular project (except that it is strong this time) and you can increase the volume at maximum again. If all goes well, which should help. However, the quality may be slightly reduced.

• Cannot move clips to the timeline.

  Mac OSX: 10.11.2

  Premiere Pro: 10.4.0

  I had problems with Premiere Pro on 10.3 and 10.4. At this point, I just want to get either version working.is curr

  10.3 hangs at startup despite uninstalling all my Red Giant Software

  10.4 opens but when I try to move clips no matter where it just doesn't happen. Cannot move bins clips or timeline. And when I opened an old project, I can't move clips autour on the timeline even if they are already there.

  Any help is greatly appreciated. I know there are many of you who know what it's like to not be able to get the software you paid for work. It's frustrating say the least!

  Removal of the preferences has worked. So far, 10.4 works!

• [JSFL] Have a name binding class by name of movie clip

  Hello

  I have a few question doing this. As I do this for some time, I wanted to try a jsfl script instead of doing it manually every time.

  My library will look like this every time.

  

  What I would like: ave in the end:
  

  

  What I want is simple, I want to just take the name of each clip and paste it into the link attribute.

  If the name was easy enough, but as it was the full path, I needed to cut it, so I used the substring.

  But then, despite my attempts, I can't paste the name into the binding attribute.

  It won't take my last sentence: "fl.getDocumentDOM (). library.items [i] .className = newClassName;

  Any ideas?

  Here is the code:

  function init()

  {

  fl.outputPanel.clear ();

  var i = fl.getDocumentDOM (). library.items.length;

  var lib = fl.getDocumentDOM () .library;.

  While (i)-

  {

  If (fl.getDocumentDOM (). library.items [i] .itemType == "movie clip")

  {

  getName = fl.getDocumentDOM () var. library.items [i] .name;

  newClassName = getName.substring (20, getName.length);

  FL.trace (newClassName);

  () fl.getDocumentDOM. library.items [i] .className = newClassName;

  }

  }

  }

  init();

  Finally got my code works with a few more lines.

  Well, I just needed to add "item.linkageExportForAS = true;". Of course...

  function init()

  {

  var i = fl.getDocumentDOM (). library.items.length;

  var lib = fl.getDocumentDOM () .library;.

  While (i)-

  {

  var point = lib.items [i];

  If (lib.items [i] .itemType is "movie clip")

  {

  if(Item.linkageExportForAS==false)

  {

  getName var = lib.items [i] .name;

  newClassName = getName.substring (20, getName.length);

  item.linkageExportForAS = true;

  item.linkageClassName = newClassName;

  }

  }

  }

  }

  init();

• 2 problems with CS6 - Movie Clip not seen & interpolations added to the library

  Occasional user of Flash. I need to edit a project which began in CS6, so I prefer to leave in this version. Once I started to edit the project, I noticed two things happening. Video clips animate not when previewing in the program. However, the Movie Clips animate properly in the preview publish and published format. The second question, each classic Tween I create is added to the library. I don't remember these two questions when originally, I worked on the project. Is there something I could have changed (preferably, option, etc.) to cause these issues? TIA

  There the scripts inside the movieclip? The instance is defined as a movieclip or a chart?

  Something in the way, as long as you have not used the OS TLF or IK, you should be able to work on the file in CC and still open ok in CS6 later.

• Using CS4 Flach and action script 2.0 how to move a specific frame in the main timeline when a movie clip instance come at the end of his chronology?

  Using CS4 Flach and action script 2.0 how to move a specific frame in the main timeline when a movie clip instance come at the end of his chronology?

  code on the last frame of your movieclip instance:

  _root.gotoAndStop ('whatever_frame');  will work unless this swf is loaded into another swf.  in this case, you must use a relative path to the main timeline (for example, _parent or _parent._parent etc.).

• I can't move clip source window to the timeline by grabing it with the mouse.

  I can't move clip source window to the timeline by grabing it with the mouse. I can cut it short it. Once that there I can't move at all

  If first is weird, restart your computer, open the first while pressing SHIFT + alt up to the Welcome screen.

  See if this will help.

• AS3: see the hide the elements of the movie clip, single button array.

  Hello and please forgive my Noobdity I teach myself AS3 and stuck on what are obviously the basics.

  I did the simple animations for years without using any AS3 at all, the time has come to take seriously.

  I read the daylights out of all reference documents Adobe now but I am stuck on this task.

  I have 4 objects of movie clip whose visibility I control with two buttons.

  First button, two of these visible clips and the other two will make visible = false

  For example: Mc1 and Mc2 > visible, Mc3 and Mc4 > visible = false

  The second button run the same function but in reverse

  Eg: Mc1 and Mc2 > visible = false, Mc3 and Mc4 > visible

  I've determined correctly or incorrectly reading endless and looking for a table should be the best way to do it.

  I may have to use the child feature add but * shrugs, I'm lost atmo

  I've been blunders on the code for the first of two simple buttons.

  I start slowly form a mindmap what should be done, but it's early days.

  Here is my code and please feel free to

  Last attempt tries to use the mouse on the trigger to control the visible state of the second two clips.

  var wcArray:Array = [myMovieclip1, myMovieclip2];

  var acArray:Array = [myMovieclip3, myMovieclip4];

  acComp_btn.addEventListener (MouseEvent.CLICK, _acComp);

  internal _acComp(e:MouseEvent): void {}

  for each {(var point: MovieClip dans acArray)}

  Item.visible =! item.visible;

  }

  }

  acComp_btn.addEventListener (MouseEvent.MOUSE_OUT, _wcComp);

  internal _wcComp(e:MouseEvent): void {}

  for each {(var point: MovieClip dans wcArray)}

  Item.visible =! item.visible = false;

  }

  }

  Currently run 1050 error: impossible to assign a value, not reference.

  The text in blue works with 2 clips of film acArray of course, where the attempt to use the mouse on.

  Any advice on the solution or the best method to implement would be greatly appreciated.

  For what you're trying to make a table is more complication than a solution, you have already divided in two arrays anyway probably due to this tax... and have two buttons to do isn't necessary, but you may already be knowing that since you have only code for one of them in any case.

  All you need is a button that activates the visible properties to their opposites.

  var array: Array = [myMovieclip2, myMovieclip3, myMovieclip1, myMovieclip4];

  myMovieClip1.visible = myMovieclip2.visible = false;  or the other two... depending on what initially as invisible

  btn.addEventListener (MouseEvent.CLICK, _acComp);

  function _acComp(e:MouseEvent): void {}

  for each {(var point: MovieClip dans tableau)}

  Item.visible =! item.visible;

  }

  }

  LF, you must have two buttons to do the opposite, as you say, then clicking on buttons must end up affecting all the buttons, no not only one of the tables you have done.  If each button should do what you say, then you should not use the! operator since that can go the opposite of what you intend, so you must assign the desired state.

  var wcArray:Array = [myMovieclip1, myMovieclip2];

  var acArray:Array = [myMovieclip3, myMovieclip4];

  acComp_btn.addEventListener (MouseEvent.CLICK, _acComp);

  function _acComp(e:MouseEvent): void {}

  for each {(var point: MovieClip dans acArray)}

  Item.Visible = false;

  }

  for each {(var item2:MovieClip in wcArray)

  Item2.Visible = true;

  }

  }

  wcComp_btn.addEventListener (MouseEvent.CLICK, _wcComp);

  function _wcComp(e:MouseEvent): void {}

  for each {(var point: MovieClip dans wcArray)}

  Item.Visible = false;

  }

  for each {(var item2:MovieClip in acArray)

  Item2.Visible = true;

  }

  }

• Using the ActionScript 2.0 Movie Clip Variable Array

  I just want to use several movie clip attached as table, btw, it's the simple code:

  if(_Global.pLevel == 0)

  {

  var box1:MovieClip = _root.attachMovie ("flip_box_lg", "fb1", this.getDepth () + 5, {_x:100,_y:100});})

  Box1._width = 100;

  Box1._height = 40;

  Box1._x = 60;

  Box1._y = 80;

  var box2:MovieClip = _root.attachMovie ("flip_box_lg", "fb2", this.getDepth () + 6, {_x:100,_y:100});} ")

  Box2._width = 100;

  Box2._height = 40;

  Box2._x = 170;

  Box2._y = 80;

  this.onEnterFrame = assignF;

  }

  Can I just making it like that?

  for (var i = 0; i < 6; i ++)

  {

  [i] var box: MovieClip = _root.attachMovie ("flip_box_lg", "fb" +(i+1), this.getDepth () + 5, {_x:60+(i*110),_y:80});})

  }

  Thank you before

  use:

  var box: Array = [];

  for (var i = 0; i)<>

  {

  Box.push (_root.attachMovie ("flip_box_lg", "fb" +(i+1), _root.getNextHighestDepth (), {_x:60+(i*110),_y:80}));}))

  }

• Movie Clip Visible after 5 sec

  Hello

  I have 3 Movie clips foam1, foam2, foam3

  they are visible after 5 sec on the hit with scratch movieclip test

  scratch.onEnterFrame = function() {}

  this.startDrag (true);

  };

  scratch.onRollOver = function() {}

  If (this.hitTest (_root.soap1)) {}

  foam1.gotoAndPlay (2);

  }

  else {if (this.hitTest (_root.soap2))

  foam2.gotoAndPlay (2);

  }

  Else if (this.hitTest (_root.soap3)) {}

  foam3.gotoAndPlay (2);

  }

  };

  then use

  setTimeout(visibleF,5000,whatever)

• Cannot add event listener to instantiated Movie Clip

  Hi guys,.

  I have a clip that I'm loading dynamically in my scene when a key is pressed.  Then, I would like to add a mouse event listener to the Movie Clip object so it can trigger a function when clicked.  I get an error when you try to do this and cannot find a solution anywhere.

  Here is my code:

  newLayerBT.addEventListener (MouseEvent.CLICK, newLayerBT_CLICK);

  function newLayerBT_CLICK (MouseEvent): void {}

  layerCount = layerCount + 1;

  Make a new object in my class BlankLayerMC

  var newLayer:BlankLayerMC = new BlankLayerMC;

  addChild (newLayer);

  Position the new object

  newLayer.y = prevY + newLayer.height;

  Change the text inside the object in order to take account layerCount courses

  newLayer.layerName.text = 'Layer' + layerCount;

  newLayer.layerNum = layerCount;

  prevY = newLayer.y;

  My problem occurs with this line...

  newLayer.addEventListener (MouseEvent.CLICK, moveSelection);

  layerArray.push (newLayer);

  }

  function moveSelection(e:MouseEvent):void {}

  var t = e.target;

  layerSelectedGraphic.x = t.x;

  t.y = layerSelectedGraphic.y;

  }

  Any help would be greatly appreciated

  change:

  function newLayerBT_CLICK (MouseEvent): void {}

  TO:

  function newLayerBT_CLICK(e:MouseEvent):void {}

• Move clips on the timeline each in its own way?

  Hello

  IM asking it's once again on its own thread, I hope someone can answer.

  How can I move clips from the bin of media in the timeline so that each clip runs on its own track instead of one after the other on a track?

  Thank you

  Saami

  Select items in the project window,

  Right click and click on Create Multi cam source sequence.

  You now have a multicam sequence in the project window.

  Click on this and open it in the timeline.

• Can't see Movie clip on stage in swf

  Why can't I see the berries of movie clip of gameLoop running with the code below?

  The film clips show perfectly when he was in another class file.

  I made that is not just behind other graaphics turning enything remains off.

  I know gameLoop runs because all his trace statements work.

  All I changed was the code below. There is no error message:

  package

  {

  import flash.display.MovieClip;

  import flash.text.TextField;

  import flash.events.Event;

  import flash.utils.Timer;

  import flash.events. *;

  / public dynamic class WordArray extends MovieClip

  {

  public var wordtext:wordText = new wordText;

  var activeWordArray:Array;

  public var wordsL1:Array = ['elephant', 'a', 'of', 'off', 'walk', 'no', 'got', 'in', 'East', 'it'];

  private var tf:TextField;

  public var letterArray:LetterArray;

  public var tileTimer = new Timer (500,384);

  the constructor code

  public void WordArray(_tf:TextField)

  {

  TF = _tf;

  nextWordF();

  * Run letter tiles Start *.

  letterArray = new LetterArray();

  addChild (letterArray);

  tileTimer.addEventListener (TimerEvent.TIMER, gameLoop);

  tileTimer.start ();

  }

  public void gameLoop(timerEvent:TimerEvent):void //This gameLoop a movieclips in

  an array that must be run in the swf file.

  All trace instructions work,

  but it is certainly not visible on the screen.

  {

  trace ("tile timer started");

  letterArray.gameLoop ();

  }

  * end of letterTile code *.

  You should not code in hard activeArray.  You must pass this LetterArray activeArray.

• How to change the alignment of the existing "Movie Clip" symbol Point?

  Hi all

  by:  Adobe Flash Professional CS6

  My Flash program contains a 'Symbol' MovieClip and then to the breast of this "Movie Clip" there are 3 layers, which are about 6-7 long chassis.

  Right now is size of video Clip "1680 x 1050" and it is centered on the stage. But the registration point is in a strange situation. It seems

  as it is biased a bit and to the right.

  I was wondering if there was a way to change the point of alignment in the same way as when you create the symbol (* that is when it shows you the )

  points of type "grid" which you click on one of them and it becomes its registration point)? I read about how you can change the registration Point of

  by clicking on the Clip and then clicking on Edit > Edit Selected/symbol/In_Place. But when I try that it's really hard to get where I want it to be...

  What I want is the upper-left corner of the symbol for the registration Point, which is the top-left corner is "0,0"

  Anyway I can do without having to "Hands-free" move image to the Point of alignment... ?

  Any ideas/suggestions would be greatly appreciated!

  Thanks in advance,

  Matt

  You can always create another movieclip that you (select the mc and choose create MovieClip) and when you specify the upper left corner to be the alignment point.

• Movie Clip should stop when that date back to the 1st scene (Web page)

  The .fla file:

  http://www.2shared.com/file/r_u9xlp1/home.html

  The problem is the graph of movie clip. It must show that on the 2nd stage (page), but when I go back to the 1st scene (page), it continues to display.

  I hope someone can help me. Thanks already for your time.

  Greetz

  scorro_ht

  use:

  function fl_ClickToGoToScene(event:MouseEvent):void

  {

  removeChild (graphMc);

  delete graphMc headphones, if there is

  graphMc = null;

  MovieClip (this.root) .gotoAndPlay (1, "scene 1");

  }