Movie Clip Visible after 5 sec

Similar Questions

• jerk strange movement clip directly after having chained transition

  Hi guys,.

  I was going along very well add clips to a timeline, then adding a transition 'cross dissolve"between each of them. each clip is about 3 to 6 seconds.  These video clips are added to the timeline on the top audio locked with a song about it. I use the "overlay" feature to add the clips.

  On some clips, there is a strange movement jerky at the beginning of the clip and just after the transition. the scene seems to jump to any 2-3 images.

  so, I deleted the fade ran into and reinforced through each image one by one.  No jerkiness.  then I put in the transition and it's just after the beginning of the clip during the transition.

  This does not happen on all of them, some. I tried to cut some framing away the video choppy, reducing it.  Add the transition, now choppy new part is there.

  Has anyone seen this? What is a setting? I use PPO5.5 on a Mac OS 10.6.6 / Intel 2.66gz / 8 GB of memory. a free 1 TB with 600Gig drive.

  Thanks for any input or advice!

  OPP creates the handle? If so, it is not doing things.

  The "handles" are there in the original media, all right.  The problem is the part of the clip is another blow, this is what you see in the transition.  You must shorten the time you use.  Developed at least half the length of your transition spent the beginning of the photo you want to use and end (point) at least half the length of the transition before the next shot.

  Yes, the Ripple Edit can be used to do this.  The help file will have the details.

• only one of the visible movie clips

  I have a few video clips on stage. I don't want a single video clip visible in each interval.  Please help.

  You are welcome.  Mark this thread as answered, if you can.

• HTML5 Canvas move one image after a period of time

  I'm new to JavaScript and html5 Canvas and you want to move one image after a period of time, for example, after an audio clip is finished playing.

  I tried: setTimeout (function () {this.getStage () .getChildAt (0) .gotoAndPlay (2);}, 36000);

  This code does not work.

  The equivalent AS3 is: function wait() {stop (); var myInterval = setInterval (function () {play (); clearInterval (myInterval);}, 36000) ;} / / end of the function wait();}

  Thank you.

  Is to understand "extended", who looks much more like the ActionScript 2.0. The word 'this' as you have it does not refer to what you think it does. Because it is inside a function (anonymous function for setInterval you did), it comes to this scope.

  Two ways to resolve this problem, assign the current scope and use inside the anonymous function or use the shortcut of exportRoot.

  affect the scope

  This.Stop ();

  var _scope =;

  {setTimeout (function ()}

  _scope.getStage () .getChildAt (0) .gotoAndPlay (2); using the reference _scope retained by the top

  (}, 36000);

  Or this shortcut in the root scope:

  {setTimeout (function ()}

  exportRoot.gotoAndPlay (2);

  (}, 36000);

• AS3: see the hide the elements of the movie clip, single button array.

  Hello and please forgive my Noobdity I teach myself AS3 and stuck on what are obviously the basics.

  I did the simple animations for years without using any AS3 at all, the time has come to take seriously.

  I read the daylights out of all reference documents Adobe now but I am stuck on this task.

  I have 4 objects of movie clip whose visibility I control with two buttons.

  First button, two of these visible clips and the other two will make visible = false

  For example: Mc1 and Mc2 > visible, Mc3 and Mc4 > visible = false

  The second button run the same function but in reverse

  Eg: Mc1 and Mc2 > visible = false, Mc3 and Mc4 > visible

  I've determined correctly or incorrectly reading endless and looking for a table should be the best way to do it.

  I may have to use the child feature add but * shrugs, I'm lost atmo

  I've been blunders on the code for the first of two simple buttons.

  I start slowly form a mindmap what should be done, but it's early days.

  Here is my code and please feel free to

  Last attempt tries to use the mouse on the trigger to control the visible state of the second two clips.

  var wcArray:Array = [myMovieclip1, myMovieclip2];

  var acArray:Array = [myMovieclip3, myMovieclip4];

  acComp_btn.addEventListener (MouseEvent.CLICK, _acComp);

  internal _acComp(e:MouseEvent): void {}

  for each {(var point: MovieClip dans acArray)}

  Item.visible =! item.visible;

  }

  }

  acComp_btn.addEventListener (MouseEvent.MOUSE_OUT, _wcComp);

  internal _wcComp(e:MouseEvent): void {}

  for each {(var point: MovieClip dans wcArray)}

  Item.visible =! item.visible = false;

  }

  }

  Currently run 1050 error: impossible to assign a value, not reference.

  The text in blue works with 2 clips of film acArray of course, where the attempt to use the mouse on.

  Any advice on the solution or the best method to implement would be greatly appreciated.

  For what you're trying to make a table is more complication than a solution, you have already divided in two arrays anyway probably due to this tax... and have two buttons to do isn't necessary, but you may already be knowing that since you have only code for one of them in any case.

  All you need is a button that activates the visible properties to their opposites.

  var array: Array = [myMovieclip2, myMovieclip3, myMovieclip1, myMovieclip4];

  myMovieClip1.visible = myMovieclip2.visible = false;  or the other two... depending on what initially as invisible

  btn.addEventListener (MouseEvent.CLICK, _acComp);

  function _acComp(e:MouseEvent): void {}

  for each {(var point: MovieClip dans tableau)}

  Item.visible =! item.visible;

  }

  }

  LF, you must have two buttons to do the opposite, as you say, then clicking on buttons must end up affecting all the buttons, no not only one of the tables you have done.  If each button should do what you say, then you should not use the! operator since that can go the opposite of what you intend, so you must assign the desired state.

  var wcArray:Array = [myMovieclip1, myMovieclip2];

  var acArray:Array = [myMovieclip3, myMovieclip4];

  acComp_btn.addEventListener (MouseEvent.CLICK, _acComp);

  function _acComp(e:MouseEvent): void {}

  for each {(var point: MovieClip dans acArray)}

  Item.Visible = false;

  }

  for each {(var item2:MovieClip in wcArray)

  Item2.Visible = true;

  }

  }

  wcComp_btn.addEventListener (MouseEvent.CLICK, _wcComp);

  function _wcComp(e:MouseEvent): void {}

  for each {(var point: MovieClip dans wcArray)}

  Item.Visible = false;

  }

  for each {(var item2:MovieClip in acArray)

  Item2.Visible = true;

  }

  }

• Move clips on the timeline each in its own way?

  Hello

  IM asking it's once again on its own thread, I hope someone can answer.

  How can I move clips from the bin of media in the timeline so that each clip runs on its own track instead of one after the other on a track?

  Thank you

  Saami

  Select items in the project window,

  Right click and click on Create Multi cam source sequence.

  You now have a multicam sequence in the project window.

  Click on this and open it in the timeline.

• Can't see Movie clip on stage in swf

  Why can't I see the berries of movie clip of gameLoop running with the code below?

  The film clips show perfectly when he was in another class file.

  I made that is not just behind other graaphics turning enything remains off.

  I know gameLoop runs because all his trace statements work.

  All I changed was the code below. There is no error message:

  package

  {

  import flash.display.MovieClip;

  import flash.text.TextField;

  import flash.events.Event;

  import flash.utils.Timer;

  import flash.events. *;

  / public dynamic class WordArray extends MovieClip

  {

  public var wordtext:wordText = new wordText;

  var activeWordArray:Array;

  public var wordsL1:Array = ['elephant', 'a', 'of', 'off', 'walk', 'no', 'got', 'in', 'East', 'it'];

  private var tf:TextField;

  public var letterArray:LetterArray;

  public var tileTimer = new Timer (500,384);

  the constructor code

  public void WordArray(_tf:TextField)

  {

  TF = _tf;

  nextWordF();

  * Run letter tiles Start *.

  letterArray = new LetterArray();

  addChild (letterArray);

  tileTimer.addEventListener (TimerEvent.TIMER, gameLoop);

  tileTimer.start ();

  }

  public void gameLoop(timerEvent:TimerEvent):void //This gameLoop a movieclips in

  an array that must be run in the swf file.

  All trace instructions work,

  but it is certainly not visible on the screen.

  {

  trace ("tile timer started");

  letterArray.gameLoop ();

  }

  * end of letterTile code *.

  You should not code in hard activeArray.  You must pass this LetterArray activeArray.

• hide the external swf movie clip

  Hello.

  I have my main.swf and in the second frame, I load an external swf called first.swf with this method:

  [AS] var loader: MovieClipLoader = new MovieClipLoader();

  this.createEmptyMovieClip("myGalleryContainerproducts",5);

  myGalleryContainerproducts._lockroot = true;

  loader.loadClip ("first.swf", myGalleryContainerproducts);

  myGalleryContainerproducts._y = 86;

  myGalleryContainerproducts._x = 50;

  [/ ACE]

  In first.swf, I have two clips with instance names ena and dyo

  I want in main.swf in the third frame to hide these clips of first.swf (only the movie clips is not the entire .swf) or move (change x and y values) so they hide practically.

  All solutions?

  Thanks in advance

  After the ena and dyo are instantiated, you can use:

  myGalleryContainerproducts.ena._visible = false

  myGalleryContainerproducts.dyo._visible = false;

• Clickable button inside the movie clip symbol?

  I would like to know how I can have clickable buttons inside a movie clip symbol.
  
  
  Thank you.

  Your problem is mainly code compared to the location of objects location. When you start the file, the keys 1 to 8 are classified under code because they are visible, while the 9-11 thru buttons are not because they live in a non-current setting of the miniature timeline. When you switch to the side MORE things, these buttons is not any code assigned to them, and when you come back, the same is true for the first eight buttons because they were out of the picture and lost their connection to any code (the previous assignments have been already spent to frame 1 of the main timeline).

  What you should probably do is locate your button code for frames where the buttons in the thumbnail movieclip. In this way, their code is always where they are. The code of the keys 1 to 8 will be in frame 1 of the miniature clip and the code for 9 to 11 will be in frame 2. You need to change the code for the form:

  thumb1.onRelease = function() {}
  _parent.gotoAndPlay("1");
  };

  And you're going to do you a favor if you do not use the numbers of the labels.

• Images of iPod touch - volume of the .mov clips

  Hello

  When I use an iPod touch pictures, the .mov clips sound volume is too low, even if I turn as hard as possible in Final Cut. How can I get stronger?

  Thank you!

  Unfortunately, it really isn't that you can do. You could make a new project and put just the clips that need to be more strong in there, then set volume as loud as it goes, then export than as a video, and then import that new video in your regular project (except that it is strong this time) and you can increase the volume at maximum again. If all goes well, which should help. However, the quality may be slightly reduced.

• Firefox.As of today 21/05/10 when I use Firefox (after 10 sec.) it produces crazy noises. Siren, etc.

  Firefox 3.6.3 as of this morning, when I'm near the top of Firefox, (after 10 sec.) I have crazy sounds. Type of siren, crazy game notes of sounds. (They stop) This happens even before everything you are looking for.
  I wonder if anyone else has this same problem?

  This has happened

  Each time Firefox opened

  is 21/05/10

  never thought I'd use internet Explorer once again.

• Satellite A100-599 exactly stop after 60 sec

  Hello

  I have an unusual problem with my laptop
  It turns off after exactly one minute/60 sec.

  I tried with another ram, with or without battery, without hard drive in the Bios Setup.
  No matter what I do it turns off after 60 seconds exactly, and I don't know what to do!

  So it's not to randomly turn off the coast, but exactly 60 seconds!
  What could be the problem?

  I can't find Bios anywhere on the internet and I m not exactly sure if I could flash even in time of 60 seconds...
  ...

  Hello

  Strange in my experience the laptop would be off automatically due to the higher temperature.
  Have you noticed a temperature higher during this 60 sec?

  It is possible that your cooling fan is not working properly, which lead to the overheating of the CPU and automatic shut downs
  But its weird that this happens always exactly after 60 sec

  In any case, try to clean the cooling fans using a jet of compressed air. Dust can affect cooling performance, so his challenge worth a try.

  The thermal grease could be renewed too, but this procedure is more complex and should be done by someone who knows how to disassemble the laptop and replace the thermal grease.

  But this is just theory I don't very well if the problem is related to a higher m temperature

  With regard to the update of the BIOS:
  This is not possible given that the laptop turns off and it could interrupt the BIOS update. In this case, this could damage the MEDIA module and the motherboard.

• Cannot open PDF files, it turns off after 10 sec.

  Original title: pdf file

  When I open a PDF file it turns off after 10 sec.

  How can I reset it so I can read or print the PDF file.

  Thank you.

  Ron.

  Hello

  1. What is the exact error message or error code?
  2 are you facing this problem with a particular PFD file?
  3 is that the question is limited to PDF files?

  I suggest you uninstall and reinstall PDF program and check if it helps.

  Uninstall a program: http://Windows.Microsoft.com/en-us/Windows7/uninstall-or-change-a-program

  Install a program: http://windows.microsoft.com/en-US/windows7/Install-a-program

  Note: With the help of third-party software or a link, including hardware drivers can cause serious problems that may prevent your computer from starting properly. Microsoft cannot guarantee that problems resulting from the use of third party software or link can be resolved. Using third-party software or a link is at your own risk

  If you still have the problem then I recommend you to contact the program vendor and check if it helps.

• I watch a movie, and then after 10 minutes or if the video is empty.

  I watch a movie, and then after 10 minutes or if the video is empty. How can I continue to see the video until it's over?

  I watch a movie, and then after 10 minutes or if the video is empty. How can I continue to see the video until it's over?

  Watch a movie about what?

  In other words - you look a the Internet via Netflix movie streaming?  A video streaming via Hulu?  A video that is saved on your hard drive?  A video that is stored on a shared network is accessible on your local network?  What is a DVD?   BluRay?  He plays using SilverLight?  Adobe Flash Player?  QuickTime?  RealPlayer?  Or something more local like WIndows Media Player or VLC?  Something else?

  I would like to say - in general...

  (1) uninstall all of the aforementioned Internet plugins.  Reset.  Download and install the latest versions (Adobe Flash Player, Microsoft SilverLight, Apple QuickTime, or RealPlayer).  Reset.  Try again.

  2) update your video card/device driver from the manufacturers of video cards and devices web page.  (You probably have a nVidia or ATI/AMD video card processor).

  (3) check the settings of your screensaver and Hibernate...

• typed letters are not visible after the end of the custom field in editfield

  class CustomEditField extends EditField {}

  CustomEditField (String text) {}

  Super("",Text);

  }

  public void layout (int width, int height) {}

  Super.Layout (getPreferredWidth (), getPreferredHeight ());

  setExtent (getPreferredWidth (), getPreferredHeight ());

  }

  public int getPreferredHeight() {}

  Return super.getPreferredHeight ();

  }

  public int getPreferredWidth() {}

  return (Display.getWidth () * 2/3);

  }

  }

  It's my edit custom field.

  When I type on this field and reached end of the field, can't see the letters after that, but I can type (the only thing is to type letters are not visible after the end of the field)

  What is the solution

  I'm sure that you must explicitly enable scrolling. See Manager javadocs.

  In addition, you limit the scope of your field, which may also fail to scroll.