movie from DVD to AVI on Windows 10 files

Similar Questions

• How can I move from Vista Home Premium to Windows 7 hp? Is it better to buy the software disk or download the software?

  My Hp Pavilion Elite M9340F desktop PC was the best computer I've ever owned five computers desktop and portable three. Not only use the personal media drive Bay and two bays of lightscribe disc, I upgraded the video card and the power supply because I run also three external hard drives more (which actually a total of six hard drives run continuously).  I want to spend all or just possibly the main hard drive and Windows 7 Home Premium personal multimedia hard disk.  Is it better to buy the disc or download the software?  In addition, how is it difficult to make the switch?  Even with good backups, I have heard horror stories of losing part or all of the files or have things so scrambled that it is almost impossible to find what you are looking for.  ANY help will be greatly appreciated.  Thank you, Mr. w. Dillon * address email is removed from the privacy *.

  Hello

  It's always a good idea to have a paper copy of a disc (for resettlement and repairs).

  And Yes, backup all your data as 'can' happen during an upgrade that is supposed to be easy.

  This is a very good guide for what you want to do:

  Make sure you go from Vista 32 bit to Windows 7 32 bit to be able to do an upgrade.

  «How To Upgrade from Vista to Windows 7 Edition Home Premium»

  http://www.howtogeek.com/HOWTO/6892/how-to-perform-an-upgrade-from-Vista-to-Windows-7/

  And follow these steps first:

  Go to the HP website and see if Windows 7 drivers are available for your make and model computer / laptop.

  http://WWW8.HP.com/us/en/support-drivers.html

  If this is not available, Windows 7 will not properly work for you.

  Run the "Windows 7 Upgrade Advisor.

  http://www.Microsoft.com/en-US/Download/details.aspx?ID=20

  Check if your specifications are compatible for Windows 7:

  "Windows 7 system requirements"

  http://Windows.Microsoft.com/en-us/Windows7/products/system-requirements

  "Windows 7 Compatibility Center" for software and hardware:

  http://www.Microsoft.com/Windows/compatibility/Windows-7/en-us/default.aspx

  Windows 7 upgrade paths:

  http://TechNet.Microsoft.com/en-us/library/dd772579 (v = ws.10) .aspx

  And the Microsoft Store where you can get an idea of the price of Windows 7:

  http://www.microsoftstore.com/store/msstore/en_US/list/CategoryID.50726100

  For other questions about installing Windows 7, there is a Forum specifically for that because it is the Forum of Installation of Vista, you're in.

  http://answers.Microsoft.com/en-us/Windows/Forum/Windows_7-windows_install?page=1&tab=all

  See you soon.

• Is there an EASY way to make a DVD from Movie Maker DVD Maker charged in Windows 8? I'm so disappointed. I did a lot of movies of family vacation and now I'm screwed.

  I always did of family films.  In recent years I have very happily used Windows Movie Maker and Windows DVD Maker.  But the old computer is dead and now I had to buy one with Windows 8 (boo, hiss).  Breath of this OS.  It is difficult to use, source of confusion, screwed up and above everything else, did NOT create DVD.  "Burn DVD" is more a choice in Movie Maker.  WTF?  How can I make a movie without resorting to downloading some programs by night, that I do not trust.

  Yes, well, I did. I did some research and looked at DVD Styler, Nero, VLC, and DVD Shrink. Nothing works. Regarding the DVD Styler, it didn't he download something called 7Zip who then simply sits on the desk until I open it, after which he there just some more showing me a menu that said things like 'computer', 'C' drive and drive "D". I am not techie enough to understand this. I was perfectly happy with the creation of DVD and the choice of "burn a DVD" on Movie Maker. I wish the technies who write such things would realize that most of us did not give a * on the stupid tiles and apps and want just a system that does what we want. As to burn the DVD. sigh.

  You then download DVD Styler.  Read the web page and click on in the appropriate places.  ;-)  This is not a technical problem - it is a "slow down and read more carefully ' a.
   
  Here's the direct link:
  http://sourceforge.net/projects/DVDStyler/Files/DVDStyler/2.4.3/DVDStyler-2.4.3-Win32.exe
   
  Download it, run it to install and installation - do what you might have missed doing on the web page download and READING and CHOOSE wisely.  ;-)

• Can't boot from DVD or USB! Windows 8

  It then it really starts to bug me! I tried to solve this problem for a few hours now, and this is absolutely not the case! So I want to do a clean install of Windows 8. I did all the steps to get it on a dvd and a bootable USB.  That was the easy part.  At first I tried to boot into DVD, I went to the Bios and the value of the first boot priority CD/DVD. After that and several reboots I get nothing! I went into F12 and it said to start from the hard drive. Good if it does not work. I go to copy the Windows 8 ISO on a USB key. Good in fact, it was easy, I can go into the Bios again and don't see an option for USB FLASH directly, but see other options start USB, such as USB, FLOPPY USB, DVD, AND USB HARD DRIVE. I first select USB DVD, after several reboot nothing! Went to F12 (boot options) and still nothing! Then, I chose USB HARD DRIVE, exactly the same thing! So now I am on my knees and gave up! I ask for help in my community and I hope that you guys can understand this.

  I just bought the computer 3 weeks ago its a new Aurora R4. I don't know whether it is a hardware problem, it seems. I tried to boot from the CD/DVD with the re - install OS AlienWare gave me and it read perfectly. So if it fills up it should work right? Then I tried several blank DVDs and even went out and bought some new! Still nothing! Ahhh, sorry it's really bugging me. Something so simple, but I'm so lost.

  Thanks for any help from friends!

  Dave, :)

  Press f2 to enter setup, disable the option "password at startup" and to record changes... now boot... you're done. Thank you

• Install windows from DVD removes the original windows supplied with my notebook recovery?

  recently I formatted my laptop with a DVD of Windows 8.1 only language, but I want to install windows and settings that came with my laptop.

  recently I formatted my laptop with a DVD of Windows 8.1 single language but I want to install this windows and settings that came with my laptop.

  Hello

  It may or may not.

  We have no idea how you have it installed.

  When you install from the DVD, you choose what happens with partitions.

  If you don't know what you're doing, look in disk management and see what are the partitions on your hard drive, even if the recovery partition is still there.

  And maybe it's still there does not say that it is still accessible after you do what you were doing.

  Ask the manufacturer what key/s support to start reinstalling the OS and see if it still works or not.

  See you soon.

• Great migrations: move from vCenter 5.1 on Windows 2008R2/SQL 2008 5.1 or 5.5 on 2012 2012 Windows/SQL

  In anticipation of the end of mainstream support for Windows Server 2008 R2, I want to migrate an installation vCenter to a whole new server and MS SQL Server.

  It is a virtual machine running in my host cluster. There Server vCenter Update Manager, Converter Standalone and some services not VMware that I can handle it myself. ADAM is installed as part of the vCenter Server requirements, and it is also attached to an AD domain where I use AD, single sign - on.

  The host cluster is four 5.1 ESXi hosts that are up to date, and helped HA and DRS. They use also switches distributed to all of their network connectivity, including vMotion, management, fault tolerance (although I do not use FT) and virtual machines.

  I did upgrades on-site to vCenter before and I replaced SQL Express with SQL Standard on the same server, but I did not move before vCenter. I'd make some drastic measures, as I understand:

  * Complete backups (of course) of SQL in the server itself, ADAM

  Installation of a new server operating system and SQL 2012

  Withdrawal of databases and reinstall them on the new server

  * Restoration of ADAM on the new server

  Installation vCenter, Update Manager, etc.

  * Hoping the host cluster is mounted on the new server, and nothing breaks

  I'm not all that worried about maintaining statistics, so maybe it is possible to install a new server vCenter Server and simply move the host cluster from the old server to the new. I moved one vCenter to another host, but that was before I put in place of distributed switching.
  --

  I found this on a related post:

  Migration in a new vCenter VMware environment. IT diversifies

  This manual seems to echo what I've read so far, I had to disassemble the distributed switches until I can migrate any host to a new server vCenter. Yuck. Well, I've migrated from the standard to the switches distributed without downtime before, so I can do the opposite.

  --

• If you use vista, how to move from one account to another windows messaging?

  My set cable company in place for e-mail accounts.  One for my wife and one for me.  My wifes account is the default value.  How to switch from one account to another?

  I searched through default settings, account information, etc. anything. I believe that under XP, you could choose an account or another.

  OE has the option of identities, Winmail opener does not work. Unless you have separate Windows logons, you use the same instance of WinMail and share the same Inbox, unless you create another and divert the mail with message rules. The only "switch" you have at the moment is when you compose a new message, there is an arrow down to the right of the field to choose the account, the message will be.

• Windows Movie Maker & DVD Maker stop responding when you import a .avi file

  Help, please.

  The two Windows Movie Maker DVD Maker & allow me to import .avi files I ask, but then I get a message that the program has stopped working. I have Windows Vista Home Premium and I a novice in computer science.

  Thank you.

  Tommy

  Hello

  ·        Have you been able to import before avi files to your Windows movie maker and the creation of DVD?

  ·        You are able to import another file without any problem format?

  Try to import another file type (format) and check if the problem persists.

   

  Step 1:

  Damaged codec is often a cause of crashes with Windows Movie Maker and Windows DVD Maker.

  If possible, use a program to convert your Windows Media movies first and then try to import it.

  Step 2:

  If the movie maker was working properly before, I suggest you to reset the windows movie maker settings. Follow the steps in the article mentioned below.

  Restore defaultWindows Movie Maker settings

  http://Windows.Microsoft.com/en-us/Windows-Vista/restore-default-Windows-Movie-Maker-settings

  Problems with importing files into Windows Movie Maker

  http://Windows.Microsoft.com/en-us/Windows-Vista/problems-importing-files-into-Windows-Movie-Maker

  For more information, see the article mentioned below.

  http://support.Microsoft.com/kb/923122

  Thanks and regards.

  Thahaseena M
  Microsoft Answers Support Engineer.
  Visit our Microsoft answers feedback Forum and let us know what you think.

• Having a problem of home movie from Director of Windows on a dvd.

  I'm trying to publish a movie on dvd.  The encoding has frozen.  So, I'm now trying to publish to this computer.  That won't happen either.  It says the following: WMM cannot publish to the specified location.  Check the original source files in your movie are still available, the publishing location is still available, enough free disk and try again.  There is enough free space on my computer, the location of publication is the computer and the used files are still there.  Help, please.  Do not know what to do to get this movie on DVD.

  Hi regshan,

  Welcome on the site of Microsoft Windows Vista Community.

  Causes of the error message:
  -Moved or renamed the files or folders you used original
  -Computer memory inadequate for the complexity of your project, combined to tasks other than your computer is done as it makes the movie.
  -By using the source files that do not work with Movie Maker, or are corrupted.
  -Required Codec may be corrupt / missing
  -Most of the problems of this type are linked to source incompatible, ether video, audio or image files

  Suggestions to overcome the error message:

  1: reduce the size of the movie file
  2: reduce the Movie setting size
  3: increase the size of the swap file
  4: save the movie in smaller Sections
  5: save the movie in a lower resolution.
  6: Download and install the latest video codec pack to fix.
  7: converted all files in .wmv files and works well.

  I also suggest you to reference the link to the KB article that has the error message when you try to publish a movie using Windows Movie Maker in Windows Vista: 'Cannot complete publish movie': http://support.microsoft.com/kb/930435

  Check reference links:

  Publish a movie in Windows Movie Maker: http://Windows.Microsoft.com/en-us/Windows-Vista/publish-a-movie-in-Windows-Movie-Maker
  Solve problems with publishing a movie to your computer: http://Windows.Microsoft.com/en-SG/Windows-Vista/troubleshoot-problems-with-publishing-a-movie-to-your-computer

  Let me know if it worked.
  Hope it will be useful.

  Thank you and best regards,
  Vijay K - Microsoft Support
  Visit our Microsoft answers feedback Forum and let us know what you think.

  [If this post can help solve your problem, please click the 'Mark as answer' or 'Useful' at the top of this message.] [Marking a post as answer, or relatively useful, you help others find the answer more quickly.]

• Save an AVI with Windows Movie Maker

  When I try to record an AVI with Windows Movie Maker saves the file with what I wanted, but then, instead of stopping, he continues to play the part of the beginning of the file, I tried to do, sometimes 3èmes once3 and with a table of contents as the screen saying inbetwwne directed by: and created using Windows Movie Maker. Help?

  Thanks for the link, they're talking about the CPU activity, when you save a file, what is that and how to see what they are talking as in "...". the CPU activity will show pushed upward and down like Movie Maker is thinking and planning. "I now have a problem trying to save sections of the entire project that I then want to add together to make a video with about 500 pictures a.625 and between each picture, there is a fondu.25, I broke down to 100 images at the time and was able to save them as MSWMM files but now when I try and save them as files video it acts like it's going to save , but the timeline never begins to show progress and finally just fails. I know I have enough space on the computer and the images I use have not been moved from their original folder. I save all the original JPEG as BMP files files and who had worked to make videos with but now with the bland added he won't save a video.

  Thank you

  ===================================
  To see the activity of the UC... Open the Windows Task Manager
  and select the performance tab.

  Four ways to launch the Task Manager.

  (1) type... CTRL + Alt + Delete

  (2) type... CTRL + Shift + ESC

  (3) right click on the Windows taskbar and select... Task Manager

  (4) go to... Start / run... type or copy/paste... taskmgr.exe... Press on... Come in

  According to your description of the issue... your projects are
  too large or complex for your system resources.

  Volunteer - MS - MVP - Digital Media Experience J - Notice_This is not tech support_I'm volunteer - Solutions that work for me may not work for you - * proceed at your own risk *.

• I am trying to burn a dvd on windows media player movie, but all I get is a desktop file burned on the dvd

  I am trying to burn a dvd on windows media player movie, but all I get is a desktop file burned on the dvd and that's all what he'll do it just ejects and the session is over

  Hi Barbara,

  You can use the player to burn a mixture of songs from the library of the drive or your computer to an audio CD, after which you can play the CD in any standard CD player. Alternatively, you can burn files on CD and DVD data. It is not possible to burn the live streams, such as radio stations, on a CD or a DVD.

  Follow the steps in the link below.

  Burn a CD or DVD in Windows Media Player: frequently asked questions:

  http://Windows.Microsoft.com/en-us/Windows-Vista/burn-a-CD-or-DVD-in-Windows-Media-Player-frequently-asked-questions

  If you need further assistance on this topic, let know us and we will be happy to help you.

• Windows DVD Maker avi file is invalid or damaged

  I have a Toshiba Satellite and am running Vista Home Premium, 64-bit version. When I try to add files to Windows DVD Maker avi, I get an error message saying that the file is invalid or damaged. I no for a fact that there is nothing wrong with the file they open and play very well in one of my players and the same exact files were burned using create DVD Windows on an another Toshiba Satellit (owned by my brother) I was serching hollow these forums for a few weeks now trying things that have worked for other people. I installed ffdshow, but also mentioned in another reply vista codec pack. I have also run the sfc/scannow command in the prompt nd at the end he told me that the corrupted files have been found, but not all of them could be fixed. I have no no that much about computers of operation but I suspect that it is a bigger problem then just DVD Maker because when I try to put these files in Movie Maker, they're fine, but then when you play them or drag them to the timeline is no sound or picture. I've only had this computer for a few months and reallly wish I can use DVD Maker because all I have not use it and really like it. Please help me

  Hello Snowboarder,

  Thank you for using the Microsoft answers Forums.

  > Try using . FIXER AVI

  > Download and install a. Fixer for AVI and try to use, which should solve the problem for you.

  Thank you. UDAY $012 please let me know that whether the solution worked or not, I thank you and appreciate your comments.

• Windows Movie Maker-impossible to publish and burn a movie on DVD

  In creation of DVD, I meswsage: "the temporary directory is not accessible.

  I never had this problem before. What should I do to be able to burn DVDs from my MOVIEMAKER

  I never had this problem before. What should I do to be able to burn DVDs from my MOVIEMAKER

  =================================
  I can only imagine that some of your sources files have
  have been moved or deleted.

  Try Publishing (save) your Movie Maker project
  in the format .wmv movie to a folder on your hard drive
  drive. Then import the .wmv video in DVD creation.

  Windows Vista-
  Publish a movie in
  Windows Movie Maker
  http://Windows.Microsoft.com/en-us/Windows-Vista/publish-a-movie-in-Windows-Movie-Maker

  Windows Vista-
  Creating Windows DVD
  Burn a video disc
  http://Windows.Microsoft.com/en-us/Windows-Vista/burn-a-DVD-video-disc

  Volunteer - MS - MVP - Digital Media Experience J - Notice_This is not tech support_I'm volunteer - Solutions that work for me may not work for you - * proceed at your own risk *.

• Can't make a dvd of multimedia from a file in DVD Maker .avi

  I struggled for days. I bought an Insignia digital camcorder and use a card to camera 4 meg for storage memory. All I want to do is import a file from my camera and make a DVD from the file that anyone can stick to their DVD player and watch it on TV. When I try to import the creator of the file said DVD the file is either corrupt or is of the wrong type. I did the DVD by other methods which play on my computers okay but a home dvd player can't read the files. Please help and put an end to my misery. This must be a simple process but of course I did hard.
  Vista Home Premium
  Thank you

  Hello, pcbeach

  Please use the Forum for answers!

  You have installed the software for your camcorder?
  Are you able to play the AVI with Windows Media Player?

  If you are not able to play the AVI file, you probably need to install the codec/software suitable for your camera.

  There is a video on the following Windows Help link which will guide you through the steps to create a DVD using Windows DVD Maker: Demo: create a DVD-video disc.

  We can't wait to hear back on your part.

  David
  Microsoft Answers Support Engineer
  Visit our Microsoft answers feedback Forum and let us know what you think.

• I'm looking to move from Windows/Apple/logic and Cubase Cubase. My questions have to do with the current (2014) Mac mini, specifically the i5 $999 2.8 GHz with 8 GB of RAM. This computer will be powerful enough to run the current logic without any pr

  I'm looking to move from Windows/Apple/Logic Pro X and Cubase Cubase.

  My questions have to do with the current (2014) Mac mini, specifically the i5 $999 2.8 GHz with 8 GB of RAM.

  This computer will be powerful enough to run Logic Pro X DAW and Cubase 8 courses without any problem?

  I would say yes, but I post here too:

  Logic Pro