moving images

Similar Questions

• Some images do not appear after moving images from one folder to another

  Lost photo should find I was moving images from one folder to another.  He said that I had this picture in the folder.  Then he asked if I wanted to replace the existing image.  I said yes.  Now I miss several photos and cannot find anywhere - but some went through.  I need these photos in return.  Any ideas on how to get back them?  Thank you

  I was moving images from one folder to another.  He said that I had this picture in the folder.  Then he asked if I wanted to replace the existing image.  I said yes.  Now I miss several photos and cannot find anywhere - but some went through.  I need these photos in return.  Any ideas on how to get back them?  Thank you

  ======================================
  The dialog box asking if you want to "replace the existing image.
  occurs when the target folder contains a file with the same
  name that you are moving.

  Unfortunately... when a file is overwritten (replaced) with another
  file of the same name... the original is unrecoverable.

  There is a slight possibility... If the photos had been altered in
  Windows Live Photo Gallery... the unreleased original versions which
  could be cancelled in may still be in the following folder:

  C:\Users\\Appdata\Local\Microsoft\Windows Gallery\Original photos.

  Good luck...

  Volunteer - MS - MVP - Digital Media Experience J - Notice_This is not tech support_I'm volunteer - Solutions that work for me may not work for you - * proceed at your own risk *.

• Animation of the PNG files for move of moving images?

  Hi, I have a small project right now and want to go a little overboard with the PNG animation files.

  So I have a moving image, I'm standing on a skateboard and shoot down the floor see photo:

  

  And the picture is rolling forward for about 10 seconds, and I want to animate a work of artists around the Board. See photo (photoshop gross just to show you)

  

  So that the work is in PNG format and I want to animate it such that the Council continues to roll, by animate, I mean simply move or "jiggy" it, is difficult to explain.

  What are my options?  I thought maybe After Effects, but I'm not even too hard on this one here.

  Any help appreciated.

  so maybe it's time to yourself in after effects a little

  Try this, if you want to learn a bit of sequels:

  (it takes about 5 minutes)

  (so much worse that this screenshot is in German, you will find your way around)

  1 duplicate the video clip of skateboarding in your tieline on a video on track (Alt + drag) [just to keep a copy of it below, if you might need it]

  2. right-click the new clip in the timeline panel and choose "replace with After Effects Composition.

  After effects opens (if not already open) and you get a new composition based on your first - chronology.
  Import your artwork, make sure that it is big enough so you can turn without seeing its edges...
  -Drag in the composition above the clip.

  3 right-click in the left part of your composition window, and then choose "new solid" to do a matte.

  4 turn off the visibility of the layer ("eye-icon")

  4B. take the tool pen (P) and draw a mask around skateboarding. (= add mask mode)

  5. set the work track matte layers to ' Alpha 'name of your matte.

  6. with the "pan behind"-tool (shortcut: y) [work layer must be selected] move the anchor point to where you want as the center of rotation to be.

  7. with the layer of the work still selected, press R to display the parameters of rotation.

  8 alt-click on the stopwatch for the rotation animation

  9 type time * 36 in the expression window. (the number will be the degree of rotation per second, so 36 you will get a full evolution by ten seconds. change this value, according to the needs: plus = faster.)

  10. keep

  11 Preview ram (zero on the numeric keypad) and see if you like what you've done...

  12 economy

  13. head back to creation and happy editing.

  

  ... 14 after effects CC tutorials | Learn how to use after effects CC

  15: learn After Effects, get help and support. Adobe After Affects CC

  16. after effects basic training

• Create a DVD combining Jpeg photos and moving images MP4

  With a camera Sony DSC H 70, we took still photos, panoramic shots and and animated images that are in the MP 4 format.

  With PMB, we can see the images in motion like a reading of films.

  How can we create a DVD that reads in fashion Pan panning and moving like a movie images.

  With a camera Sony DSC H 70, we took still photos, panoramic shots and and animated images that are in the MP 4 format.

  With PMB, we can see the images in motion like a reading of films.

  How can we create a DVD that reads in fashion Pan panning and moving like a movie images.

  ==========================================

  You can do the Panning... with Photo Story 3.

  (FWIW... it's always a good idea to create a system)
  Restore point before installing software or updates)

  PhotoStory 3 for Windows
  http://www.Microsoft.com/download/en/details.aspx?ID=11132
  (works on XP, Vista and?) Win7?)

  This is not a full tutorial, but should be enough to help you started...

  First be sure that the photo is less than 7200 x 7200 pixels pixels.

  Import a panoramic photo in Photo Story 3 and move on
  the screen "tell your photos and customize the animation."
  (do not remove the black borders)

  On the left, click Custom animation...

  Check the box on the screen to customize the animation...... "specify
  Start and end Position of the movement "." Resize and reposition the
  Start management Position and final Position you prefer and
  on the left, click the Preview button to see the result.

  Also you can import multiple instances of a photo and
  Pan from point A to point B in the first instance,... then point B
  point c on the second instance and so on.

  When the effects of movement are completed you can add music if
  you want and go to the screen "Save Your Story."

  You can left click on the 'Settings' button for several choices of
  resolution... the profile of 1024 x 768 is perhaps a good choice.

  Also... Choose a backup location and a name for your video.

  To save the project as a. WMV video file... click Next
  last time.

  Then you can import that video as well as other photos and
  video clips in DVD Maker to create your DVD. If you have
  problems with the video clips you may need to convert to MP4
  paste them into WMV format before importing in creation of DVD.

• LR5 not moving images between volumes

  This morning it worked always, tonight I can't move images between volumes more in lightroom. A dialog informs me that the images can be copied or moved to the selected destination.

  It works from the finder without problems, which indicates that the permissions are OK. What else could be wrong?

  Move the pictures in your operating system, reconnect in Lightroom using Adobe Lightroom - find folders and files moved or missing

• Confused! Moving images one directory to another VM...

  VMWorkstation v6.5.5

  Host operating system: Vista Ultimate all MS updates

  Guest OS: Windows XP Pro

  I created a virtual machine image for Windows XP Pro and initially placed the files under C:\Users\MyUserName\Documents\Virtual Machines\OriginalLocation\.  Without going into the details of my desire to move these files out of the Documents folders together, I compressed the whole above the folders and files in May.  I just restored today and they work fine.  After that I copied the files and I went to the Options of Workstation WM redirected pointer images VM directory to point to my NEW location of C:\VMWare\NewLocation.  I copied (not moved) all files and folders under the C:\Users\... OriginalLocation\.  I can still see the ORIGINAL location when I hover over the name of WM picture under the sidebar in VM Workstation.  In addition, I just renamed the C:\Users\...\OriginalLocation in C:\Users\...\0-Original Location\ but now I can't start my VM image.  Obviously, I need a pointer to my new location and get the free C:\Users\...\OriginalLocation ot THE folders and files of VMWare.

  I just wanted to move the files to a NEW location on my HD... simple!  BUT... ;-(((

  I checked in VM Workstation help and he says:

  **************************************************************
  Move a Virtual Machine
  You can take a virtual machine that was created using the workstation and move it to a different computer or to a different location on the same computer. You can even move a virtual machine to a host running another operating system. For example, you can move a virtual machine from a Windows host to a Linux or ESX Server host computer.
  In general, moving a virtual machine means move the files that make up the virtual machine to. Names in path for all files associated with a virtual desktop computer are related, which means that the path of each file is relative to the directory of the virtual machine. For example, if you are in the directory of the virtual machine, the relative path to the virtual disk file is < nom_machine > hard.
  **************************************************************
  This seems to CONFIRM my approach, but my approach does NOT work. [underlined above]  Using above said nothing about restoring the link through the Options tab!
  What I am doing wrong?  ARG!  ;-))  & :-(((
  BTW, VMTools is updated, FYI!
  TIA

  The "stock", so to speak, is shown in the Favorites.  In terms of getting the VM moved upward and just running, double-click the .vmx config file which resides in the folder that contains the files that make up the Virtual Machine. (It has an icon of 3 squares overlapping).    Or do as you would in any other application, and then click file > open, and then navigate to the location you moved and select the .vmx config file.  It then displays in a tab and you can click on the name of the Virtual Machine on the tab and select Add to Favorites.

• How do I reduce the data file after the moving images to another data file

  All,
  
  I did a test of simepl to see how should I reduce my data file after the transfer of the objects thereof.
  
  I had an image in my data file USER_image, which is about 9 GB in size. I created the new data under the new tablpespace file and moved all the images in this new space of tables. So my old tablespace of image with its data file is now empty. At least there is not all user objects.
  
  Now I tried to resize the old datafile (USER_image) to a smaller value, but I keep this error
  "ORA-03297: file contains data beyond the value required to RESIZE.
  
  The file size is 9 GB and I tried to resize to 8 GB but it still does not allow me.
  
  Is it possible to resize a data file after moving all its purpose?
  I'm something wrong or missing something?
  
  Thanks in advance.

  If you old image tablespace is indeed empty (you need to run a statement against DBA_SEGMENTS to check) then you can bring it, data files included.
  After this, you can create a 'new' tablespace with the old name and desired data file sizes.

• error 0 x 80070571 when of moving images from my mobile phone cards in a file on my external hard drive

  Original title: error 0 x 80070571 download of photos from my mobile phone this morning card and transfer them to a file on my external hard drive

  I was downloading pictures from my mobile phone card this morning and their transfer to a file on my external hard drive.  Whenever I tried, I got this error message.  I don't think this is the card for mobile phone I can transfer on my laptop.  How can I fix?  Sherill

  Hello

  1. don't you make changes to the system before the show?

  2. were you able to transfer before that?

  3. How do you connect the card to the PC?

  4 is confined to the transfer of images on external hard drive.

  5. what happens if you try to transfer the photos to the hard drive internal?

  Method 1: Perform a clean boot.

  To perform a clean boot and see if the problem still occurs, follow the steps in the below link.

  http://support.Microsoft.com/kb/929135

  Note: once you are done with the boot, follow step 7 in the link to your computer in normal mode.

  Method 2: Perform a disk check.

  Follow the link below and look for errors.

  http://Windows.Microsoft.com/en-us/Windows-Vista/check-your-hard-disk-for-errors

  Important: When running chkdsk on the drive hard if bad sectors are found on the disk hard when chkdsk attempts to repair this area so all available data on this risk to be lost

  In addition, you can check out the link and check if it works.

  http://Windows.Microsoft.com/en-us/Windows-Vista/how-do-I-get-pictures-from-my-camera-to-my-computer

  http://Windows.Microsoft.com/en-us/Windows7/how-do-I-get-pictures-from-my-camera-to-my-computer (Applies to Windows Vista)

  It will be useful.

• Positioning of moving image

  I have a field that extends BitmapField (called AnimatedGIFField) and an AnimatorThread (which extends from Thread) who does the work of a loop through the images GIF, image current and crippling incrementing field, which calls the method object to draw the following picture (resulting in animation).  The animation code works very well, but my problem is in the method object of the AnimatedGIFField class.  I call "graphics.drawImage ()" and I can't get the stations suitable for x and y (the first two args to drawImage()).  Positioning of the AnimatedGIFField works and is made by substituting 'getPreferredWidth()' and 'getPreferredHeight().  The corresponding code is here:

  public class AnimatedGIFField extends BitmapField {
  
      /**
        The current frame in the animation sequence; the AnimatorThread
        increments this so paint() knows which frame to draw.
      */
      private int currentFrame;
  
      public AnimatedGIFField(GIFEncodedImage image, long style) {
          super(image.getBitmap(), style);
          this.image = image;
          this.preferredWidth  = this.image.getWidth();
          this.preferredHeight = -(this.image.getHeight() * 4);
      }
  
      protected void paint(Graphics graphics) {
          // Calling super draws the first background frame.
          super.paint(graphics);
  
          // Don't redraw if this is the first frame.
          if (this.currentFrame != 0) {
              // Draw the animation frame.
  
              /* getFrameLeft() and getFrameTop() both return the top left-most position (0, 0). */
              /* graphics.drawImage(this.image.getFrameLeft(this.currentFrame), */
              /*                    this.image.getFrameTop(this.currentFrame), */
              /*                    this.image.getFrameWidth(this.currentFrame), */
              /*                    this.image.getFrameHeight(this.currentFrame), */
              /*                    this.image, this.currentFrame, 0, 0); */
  
              /*
                Currently trying some hackish nonsense like this to position the frame, although
                it probably won't scale properly across different devices/screen sizes.
              */
              int x = (this.getManager().getWidth() / 2) - 45;
              int y = (this.getManager().getHeight() / 2) + 83;
  
              graphics.drawImage(x, y,
                                 this.image.getFrameWidth(this.currentFrame),
                                 this.image.getFrameHeight(this.currentFrame),
                                 this.image, this.currentFrame, 0, 0);
          }
      }
  }
  

  Unfortunately, what you are trying to reach is not very clear. Where exactly you want to position your image? You want all managers to paint in the same place (I assume you are)?

  On the default width / height favorite:

  • You have a very strange calculation for this.preferredHeight.
  • You don't show your getPreferredWidth/getPreferredHeight methods.
  • Even if you have some perfect getPreferredWidth / getPreferredHeight methods, they are irrelevant for your field positioning and size. It's ironic but true.

  Anyway, here is an approach to work more:

  1. as you extend a BitmapField, you need to define your size, the default width and height preferred - it will automatically solve of the superclass.

  2 x and compared to the internal coordinates of the field, you have to put two zeros here (literally, drawImage (0, 0,...))

  3. instead of the substitution of object, you can easily call setBitmap (image.getBitmap (currentFrame)) and it will work only (setBitmap modifies the bitmap and invalid field).

  4. If you use setBitmap, you need not to extend BitmapField - use the native one and do all the manipulation of the image in the animation thread.

• Moving images to release drive distinguished

  With the help of the LR5. Left photos internal mac HD to external hard drive in order to preserve space. After the move, internal hard disk space has not changed. How can I do then?

  jeffd17174930 wrote:

  MI

  I moved the files in LR5

  Well now, you must delete the original file and you will get back your space. Check move you (copy) the file indeed and it is in the new location preferred until you delete it!

• Moving images, lightroom mobile for external hard drive - how?

  Hey all,.

  I'm mobile synchronization of images from Lightroom and the images are so not in my normal hard drive folder structure.  Periodically, I offer my images on my main hard drive to two external drives.  How can I manage this process of getting the images synchronized to an external hard drive?

  Thank you

  Andrew

  Hi André,.

  You can specify the location of Lightroom Mobile images to be stored in the Lightroom preferences > Lightroom mobile tab > check "Specify a location for the mobile Lightroom images" > click on select, then select the location

  Kind regards

  Claes

• Text on a moving image

  Hey,.

  I want to spend a bit of text on an image (in this case the h1). I know that you have a background image on a piece of text but if I do that I can't do a transition for the text. Which is what I want to do. But if I have the text in the div for same as picture and move the text to the top with the 'margin' he does not remain in its place. It moves around when I resize the page. I tried the relative and absolute position and it still doesn't work. All I'm looking for is a big picture, (I have a < img src = "...) ") with a piece of text in the middle of what I can fade when you pass the mouse over it. The bit of transition I know how to do. I just need to get the text on the image and I need to stay in the middle of the image and not move to the top or the bottom of the page that resize you the page. I'm in dreamweaver CC, but I think that the solution will be the same for older versions of dreamweaver.

  Can someone help me with this?

  You will need to use CSS positioning and z-index. See the link below for more details.

  Sensitive images with text overlay - http://alt-web.com/

  Nancy O.

• 6.2 Lightroom crashes on moving images

  While others have reported various accidents of the latest version of Lightroom (6.2 build 1044713) I discovered that sequence animated images in Lightroom leads also repeatedly crashing.

  By selecting a group of images, and then try to move them from one folder to another in the existing Lightroom Catalog led (usually but not always) to accidents.  I have to go back to the previous version, until Adobe can clean or is there another solution?

  Richard

  Yes, you can return to the old version of LR CC/6. Search for 'The Queen of Lightroom' Victoria Bampton. It has steps you need to take to return to LR CC 2015.1.1 or LR 6.1.1

• Lightroom CC - Moving images from phone to the PC and I messed up!

  Good evening

  I was wondering if someone could offer some advice on how I have gone wrong here. I know now I should probably had recourse to a central workspace, but in my method of madness, I made a hash of it!

  I added a folder of images, I was working on fine in Lightroom CC on my PC. They are all RAW images and I've made a few changes to some and forced to half way and I was going there for a few days I copied the folder of images on a memory stick and taken with me to work on my laptop. I made all the changes to all images and now I'm Home I wanted to transfer to my PC. Here now the problem lies. All the parameters of the image have not copied across to the PC. I look on my laptop and all files are modified but the PC ones are they not still show where I had up front. I copied through the FIRST two and. XMP files. I tried to remove them altogether on my PC and 'import catalog' then 'Add' in the Lightroom folder but it presents itself to where I had before and no new image changes I did it on my laptop.

  I would like any advice or suggestions, that everyone has.

  Thank you very much

  By default, Lightroom takes its develop adjustments and stores it in the catalog, and so the XMP files you have transferred is not changes in LR on the laptop.

  For that LR catalog in the XMP files changes, you will want to select the photo, and then choose metadata > save metadata to file (Ctrl-S).

  

  You may need some time for LR to write the changes to the files. Then, copy all of the XMP files that should now be updated on the PC.

  On the PC, select the photos and choose metadata > read metadata from file. This should transfer the XMP data in the LR catalog. Note that until you read the metadata changes, you may notice a new icon on your tiles in LR and hovering over the icon indicates that the metadata has changed outside:

  

  By clicking on the icon for a single photo does appear a dialog box to allow you to bring the new parameters (reading) or overwrite parameters (writing), which is the same effect as using the menu:

  

  This is the advantage of the menu you can set read/write a grid full of images at once.

  I hope that helps!

  Mike

• Moving Image plus external hard drive portable hard drive

  I am not anything change in my system.  I use windows 7 and will continue.  No change in the elements version (10).  Please give me a step by step instructions on how to move my pictures from my hard drive to an external hard drive (it won't be a return to the top) but the primary locaton for my photos.  I'll keep the program items on my computer and when I want to work on my photos or download more pictures from my camera I'll connect the external hard disk.

  My questions are to be read in your writing

  When I drag and drop my photos I look at my pictures in the elements Organizer?

  No, there are two ways to see your folders PSE11 and PSE12: I have PES 10 it would be the same?

  By default, it's point of view "my images". It shows a simple list of all the files containing the images recorded in the catalog; the entire record of the last level, without the Organization of the tree. You may have missed (like many, many users... Yes I guess I certainly missed this cause I can not find even today) the window of 'Images' you get by clicking on the little yellow icon in the title bar of "my pictures". You will see all of your folders and subfolders, all your different disks. It is very close to the Windows Explorer folder view, and you can do most of what you would do in Solution Explorer.  This 'my images' am I looking at?  In windows 7 or when I'm in post-secondary education?  If in windows 7 and I watch 'my pictures' I don't see the yellow icon in the title bar of "my pictures" I don't see such a thing in the element in the Organizer either.

  You will understand better if you take the time to play with the 'Photos' mode, where you can reduce or expand subfolders or do a right click to view 'show all files' when they are reduced.