Similar Questions

• A text in a moving image...

  I did not take the photo, but if I want to move a text that is on the image, how can I do it without touching the bottom?

  Because I don't have the photo, I have no layers to this issue.

  Thank you!

  There is no direct way to do it - you believably paint text, pretending visually the image information which does not currently exist.

  Please forgive me for mentioning it, but people sometimes ask how to remove the watermark that says things like "Copyright ©", "do not use without Permission", etc..  Don't do this. If someone is selling the image and want to use it, please pay them money for it.

  -Christmas

• The device icon and text missing in the imaging devices Manager

  The device icon and text missing in the imaging devices Manager

  I'm running MS Vista Ultimate.

  The imaging device icon and the wording are missing in Device Manager are missing. A device is listed in the box as installed missing icon.

  The other devices in Device Manager normally appear and I can compare what is supposed to be there for another computer running the same version of windows.

  However, the device will not work and will not reinstall.

  When you try to reinstall the device an error indicates that Setup does not work and to contact the manufacturer of the device.

  Yet once, however, this happens when I try to install any imaging device.

  I'm unable to locate information about the imaging devices in the registry.

  I think that some registry entries are missing.

  It is not the missing peripheral individual. This is the section in Device Manager.

  The image error is logged:

  "Windows didn't load setup." Contact your hardware vendor. »

  This happens with any device inaging of anyone.

  Hi henrymullersr

  What imaging device do you use?

  We can try a few steps and check if it helps you.

  Try to run the hardware and devices Troubleshooter: http://windows.microsoft.com/en-US/windows7/Open-the-Hardware-and-Devices-troubleshooter

  If the result of the Troubleshoot utility is negative, then reinstall the device. And also be sure to uninstall the previous contents of the device driver by running utility windows install cleanup:

  http://download.Microsoft.com/download/e/9/d/e9d80355-7ab4-45b8-80e8-983a48d5e1bd/msicuu2.exe

  Now follow the following steps:

  1. Save the Windows Installer Cleanup Utility package on your computer

  2. right click on the Windows Installer Cleanup Utility and run as administrator

  3. follow you prompt in the installation wizard. Once completed the installation, click on the Start button

  4. click on all programs. Click on Windows Install CleanUp Utility.

  5. click on the device driver (if on list) in the list of programs.

  6. click on Remove. Click OK

  7. click exit

  Restart the computer for the changes to take effect
   
  Then try to install the device driver and check the result: http://windows.microsoft.com/en-US/windows-vista/Install-a-USB-device

  After back and let us know if it helped to solve your problem.

  Thank you and best regards,

  R uma - Microsoft technical support.

  Visit our Microsoft answers feedback Forum and let us know what you think.

• Some images do not appear after moving images from one folder to another

  Lost photo should find I was moving images from one folder to another.  He said that I had this picture in the folder.  Then he asked if I wanted to replace the existing image.  I said yes.  Now I miss several photos and cannot find anywhere - but some went through.  I need these photos in return.  Any ideas on how to get back them?  Thank you

  I was moving images from one folder to another.  He said that I had this picture in the folder.  Then he asked if I wanted to replace the existing image.  I said yes.  Now I miss several photos and cannot find anywhere - but some went through.  I need these photos in return.  Any ideas on how to get back them?  Thank you

  ======================================
  The dialog box asking if you want to "replace the existing image.
  occurs when the target folder contains a file with the same
  name that you are moving.

  Unfortunately... when a file is overwritten (replaced) with another
  file of the same name... the original is unrecoverable.

  There is a slight possibility... If the photos had been altered in
  Windows Live Photo Gallery... the unreleased original versions which
  could be cancelled in may still be in the following folder:

  C:\Users\\Appdata\Local\Microsoft\Windows Gallery\Original photos.

  Good luck...

  Volunteer - MS - MVP - Digital Media Experience J - Notice_This is not tech support_I'm volunteer - Solutions that work for me may not work for you - * proceed at your own risk *.

• I need a Korean font available in Adobe Muse as text and not as image.

  I need a Korean font available in Adobe Muse as text and not as image.  I went to Adobe Typekit and raise police SOURCE HAN WITHOUT KOREAN.  I chose the 'use' police, police has been sync and it is available in Muse, but not in the form of text, just like the picture.  HOW can I use this font in text form? He is listed as the system font. ??? Help, please.

  I had the same problem when I wanted to use the Source Han San for the Chinese.

  Muse apparently does not yet support languages.

  The only way is to use a hosted free font: Add self-hosted web fonts | Adobe Muse CC tutorials

• Fill text with a picture and zoom so that we can "dive" into the text to see the image in full scale

  Hello

  I made a text filled with an image, and I'd like to zoom in on the letter, as if we can "dive" into the letters, then see the whole picture in full scall (my resolution is 1920 x 1080). Do you know how to make such an animation?

  

  Here's a screenshot to show you what I did.

  I assume you are using the 2 as a track matte for an image. I can only imagine because you gave us no details or a screenshot of your computer with all the properties changed all of the layers has revealed. I assume you want to reveal the image below rather than pushing into it.

  If this is the case, then you can make the layer containing the number 2 a 3D layer and animate the position so that it moves to and in front of the camera or you can leave the 2D layer and animate the scale the layer. If you use the 3D trick, you will get a more natural look. You can consider to move the anchor point of the layer to the part of the 2 that you want to be at the center of the revelation. This is what a basic 3D displacement would look like.

  

• Is there an easy way to create "the mouse on the text, to display the image" without coding it? I want an image to appear only when you move to a line of text. I found the code for it but I want to find an easier way. Thank you!

  Is there an easy way to create "the mouse on the text, to display the image" without coding it? I want an image to appear only when you move to a line of text. I found the code for it but I want to find an easier way. I'm creating a home page with a list of text links. I want to design as well as in the overview of one of the text links, a corresponding image is displayed to the right of the page. I also need a default image to rest all the time unless one of the other links text is hovered over. Thank you!

  Try to use a Widget for Composition in the Adobe Muse Widgets Panel.

  I would like to start with a blank publication.

  Place your text in the button area.

  Place your image in the display area.

• Hello! I am a beginner Photoshop - how I 'color above' text on a jpeg image - then match the color background - then retype the new text above? If someone can give me really basic step by step intstructions - I would be happy!  With our thanks!

  Hello! I am a beginner Photoshop - how I 'color above' text on a jpeg image - then match the color background - then retype the new text above? If someone can give me really basic step by step intstructions - I would be happy!  With our thanks!

  Hi Donnas,.

  Content-aware fill is your best friend in this case.

  Just make a selection around the word and go to edit-> Fill-> Content-Aware.

  This usually done a very good job.

  Then you can either return to it several times (maybe in smaller sections) with Content-Aware fill to clean it, or you can play with the Spot Healing Brush tool (J) or the tool clone stamp (s).

  Please see the following link for more information 3 ways to delete the text to a picture in Photoshop - wikiHow

  http://www.WikiHow.com/add-text-in-Photoshop

  Let us know if it helps.

  Concerning

  Sarika

• How to extract text from a GIF Image?

  I have 47 lines typed text parsed as (.gif) image file.  I want 47 lines of text from the image, so it can be edited in MS Word. I've attached an example image file. I have several of the same format image files. How to extract text from an image using Photoshop CS2. In Photoshop CS2 image text layer is locked. During extraction using OCR it gives words and symbols, should be a lot of words spruced up. Kindly help to extract text using Photoshop CS2. Thank you.

  

  This has nothing to do with PS. Others are simply limits to all OCR process and you will have to live with it, especially since your image is extremely low resolution and the font used is not particularly suitable for OCR, either - too many thin areas will be ignored or interpreted as gray. Whatever it is, it took me 2 minutes to write this response at this very moment a bad typist like me might have re typed your text from scratch, just access it so...

  Mylenium

• How do I change text in photo portfolio image content?

  How do I change text in photo portfolio image content?

  If you go to the gallery in the admin... Select an image - you will see a field appears to put/change this text.

• Animation of the PNG files for move of moving images?

  Hi, I have a small project right now and want to go a little overboard with the PNG animation files.

  So I have a moving image, I'm standing on a skateboard and shoot down the floor see photo:

  

  And the picture is rolling forward for about 10 seconds, and I want to animate a work of artists around the Board. See photo (photoshop gross just to show you)

  

  So that the work is in PNG format and I want to animate it such that the Council continues to roll, by animate, I mean simply move or "jiggy" it, is difficult to explain.

  What are my options?  I thought maybe After Effects, but I'm not even too hard on this one here.

  Any help appreciated.

  so maybe it's time to yourself in after effects a little

  Try this, if you want to learn a bit of sequels:

  (it takes about 5 minutes)

  (so much worse that this screenshot is in German, you will find your way around)

  1 duplicate the video clip of skateboarding in your tieline on a video on track (Alt + drag) [just to keep a copy of it below, if you might need it]

  2. right-click the new clip in the timeline panel and choose "replace with After Effects Composition.

  After effects opens (if not already open) and you get a new composition based on your first - chronology.
  Import your artwork, make sure that it is big enough so you can turn without seeing its edges...
  -Drag in the composition above the clip.

  3 right-click in the left part of your composition window, and then choose "new solid" to do a matte.

  4 turn off the visibility of the layer ("eye-icon")

  4B. take the tool pen (P) and draw a mask around skateboarding. (= add mask mode)

  5. set the work track matte layers to ' Alpha 'name of your matte.

  6. with the "pan behind"-tool (shortcut: y) [work layer must be selected] move the anchor point to where you want as the center of rotation to be.

  7. with the layer of the work still selected, press R to display the parameters of rotation.

  8 alt-click on the stopwatch for the rotation animation

  9 type time * 36 in the expression window. (the number will be the degree of rotation per second, so 36 you will get a full evolution by ten seconds. change this value, according to the needs: plus = faster.)

  10. keep

  11 Preview ram (zero on the numeric keypad) and see if you like what you've done...

  12 economy

  13. head back to creation and happy editing.

  

  ... 14 after effects CC tutorials | Learn how to use after effects CC

  15: learn After Effects, get help and support. Adobe After Affects CC

  16. after effects basic training

• How to place a text box on an image in a specified location?

  Hi all!

  I am an intermediate user of Dreamweaver and try to learn the CSS I created my Web site.

  My problem is that no matter what position specified I returned to the text box using the implementation of style, the results are far from what I'm looking for.

  I built my website using tables and want to place the text box on an image that is embedded in a cell.

  So, here's what I've done so far:

  CSS stylesheet:

  #abouttext {do-family: Arial, Helvetica, without serif;}     do-size: 16px;     make-style: normal;     make-weight: normal;     color: #FFF;     text-decoration: none;     background-color: #D0DF4A;     padding: 5px;     height: 260px;     Width: 180px;     overflow: hidden;     visibility: visible;     border: 1px solid #D9E46B;     right: auto;     bottom: auto;     z-index: 1;     resize: none;     position: absolute;     left: 331px;     top: 289px; } //below is the assigned div.

  < div id = "abouttext" >

  < p align = "center" > this text is enclosed in an < /p > box.gdsgsfgzfdgfg

  < / div >

  I know I'm missing something, and it's probably something to do with the investment. I don't get how to assign the up, down, left and right values.

  Could someone please explain?

  Thanks in advance!

  ~ THE

  Hello, I'm newer than you if do not have a go if it is nonsense - I tried!

  But I discovered this week that to make the absolute position of the work the containg div must have the relative value.

  I have a #container defined, div.  The #content div is then positioned compared to this div container using an absoulte position.  Move it around to adjust the position absolute - in my case I used left = 0 top = 0 to put it at the top left of the div container I used Panel click CSS styles on the div #content and there standing in live mode view - I can not yet write code.

  ?????

• Question on text overlay on an image

  Hi - I'm trying to place a layer of text on a ghost image that I imported into ID of Photoshop.  I mean by 'ghost' image has a fill layer white which has been set at 50% opacity.  ID let not text be layered on top of the imported image, regardless of how many different ways I tried to achieve.  It will allow another image to be superimposed on top of text.  If I place a text block on the letter of even an image and the ghost, the red warning icon type overset text is displayed.

  I tried to apply the text in Photoshop and that works very well until the file is imported in ID, how the text looks awful, which is somehow degraded in transit.  I'm relatively new to the ID and the PS and would appreciate any useful input.

  Thank you!

  ~ Artemis

  It seems that the dressing is applied to the image or the image above, or both. Eihter disable it if you don't need it for other reasons, or for the image that you want to use on top of it, open the Options of text block and check the box ignore the skin in the lower left corner.

• Need to insert text next to the image in the pop-up window.

  Hello. I picked up a wall to free image here:

  http://tympanus.NET/Codrops/2011/08/30/automatic-image-montage/

  It works fine, but now I play with her.

  I managed to get the images, or at least the first one to open in a popup, great. Problem is I want to be able to have the text next to the image in the pop-up window. < Title > I tried to see if I could do it with a ToolTip, which could have trouble, but did not work anyway. I do not see where to put the text and how? < h1 > doesn't work either, it flashed up before the opening of the imagewall.

  Here's the code for popup:

  <!-- starts here--><script type="text/javascript">
              function newPopup2(url) {
          popupWindow = window.open(
          url,'popUpWindow','height=700,width=800,left=10,top=10,resizable=yes,scrollbars=yes,toolbar=no,menubar=no,location=no,directories=no,status=yes')
          }
          //]]>
          </script><a href=
                  "JavaScript:newPopup2('images/1.jpg');"><img src="images/1.jpg"></img></a>

  I think I should use a legend, but God knows how. I think I could do a second image with the text included next to him like a popup, but that's a dress rental store and that would imply photoshopping the second image, whenever a change has been made. I want text editable in a text editor.

  I also want to add a link from the context menu.

  Long live the people

  The problem is that you open a .jpg image in the context menu.

  

  All that works... all you get is an image.

  A better way to make the popup is to create a page HTML Web new, small containing your image as any text or other content that you are interested in. Because it's just a standard HTML page, you can style the text and presentation page (including links) with CSS, just as you would any other Web page.

  then you href should look like this:

  For working example:

  http://www.worldbarefootcenter.com/

  Highlight at the bottom of page and see several popups, each being a small HTML Web page just displayed in a pop up window instead of a new tab view source if you want more information. I use a slightly different method to open the context menu, but the idea is, use an HTML page rather than just an image.

  Best wishes

  Adninjastrator

• Registration in PDF format makes black text appear when inserted images

  Hello! Please if someone could help with my bug. I use InDesign CS 5.5 now, but the same thing also happens when I try to save a Word document as a PDF (MS Word 2010).

  This only happens when I insert images into a page. Record in PDF format, black text appear when inserted images. Please see the pictures attached the text normal and abnormal in the case of an inserted picture. I also installed Acrobat X Pro. I have no printer connected to my PC.

  Please if someone could tell me how to fix this bug?

  Thank you very much in advance!

  

  PNG should work fine (even if it is not designed as a print size). If is not the image in question format (thought jpeg does not support transparency in the image itself), jut the fact that there is a form any transparency on the page.