Mowed by Wi - Fi
I have a wireless connection for the internet set up to my neighbors House and although my pc says that between us, there is a good signal, I often lose my internet connection, especially when Microsoft have downloaded an update. I am sure that the problem lies in my own pc.
When this happens, I have to use system restore every time to restore the internet link.
The number of defects that appears is: 80072ee7, I being a surfer of money have no idea what this means or what to do about it.
Can anyone help?
PS: I think I'm very lucky to have gotten this far... !
In fact, the problem may be with their router if it is old and is not compatible with Win7. Since you do not give the information the router, all I can do is suggest you make sure that the router is compatible and that the encryption is at least WPA or WPA2-Personal-even better.
You mentioned that you lose the signal when MS updates are involved. You install the wireless network card drivers mistakenly? Don't, don't. Set your Windows Update to let you know when updates are available and watch them before installing them. If you think that this is the case, then post back with the make and model of your computer or, if it is a generic construction instead of a laptop, the make and model of your wireless network adapter. MS - MVP - Elephant Boy computers - don't panic!
Tags: Windows
Similar Questions
-
Hello
All those put implement IPC using mower portlets? My problem is a bit like the problem described in [this thread: http://forums.oracle.com/forums/thread.jspa?threadID=965532 & tstart = 0].
Let me try to explain the problem: we have an existing j2ee web application running on wls 9.2. This application is used its pages in 2 sections, a header (which has navigation tabs), then the content. We used 2 mowers - a cutting of the tab header menu (lets call it the portlet header) and the other for the body content (lets call it the portlet content from body). 2 portlets are available on the same page of the portal. Now, when a user clicks on a tab on the mower header portlet, should refresh the entire page and the content portlet body mower should be used as the content of the link clicked in the header portlet.
I understand the way it would be to generate a custom event by clicking on a link in the portlet header and have a handler in the portlet body listen to the event, retrieve the event payload (that would be the url of the clicked link) and then cool off with the content of the link clicked. It is somewhat similar to the approach described by Kevin forum user in the other thread.
I know how to listen to an event in the portlet body and attach a method in an event handler and al. What I need help on is to understand the methods of life cycle in the backup file of the header portlet where I need to get this custom event. I have tried to create a generic portal (onRefresh) event and attached a handler who listens to its own instance only (as a test), but the method of backup file never take a shot even if the page refreshes with the new clipped content.
Thank you for taking the time to read this post.
see you soon,
RAM memory.Hello Ram,
The best way to check if the initial state for the Clipper portlet has been set would be to put the following code in your backup file event handler method:
com.bea.netuix.servlets.controls.portlet.backing.PortletBackingContext pbc = com.bea.netuix.servlets.controls.portlet.backing.PortletBackingContext.getPortletBackingContext(request); com.bea.netuix.servlets.controls.application.backing.DesktopBackingContext dbc = com.bea.netuix.servlets.controls.application.backing.DesktopBackingContext.getDesktopBackingContext(request); String portletLabel = pbc.getLabel(); String desktopLabel = dbc.getDefinitionLabel(); String sessionKeyName = "clipperState:::" + desktopLabel + ":::" + portletLabel; javax.servlet.http.HttpSession session = request.getSession(true); Object clipperState = session.getAttribute(sessionKeyName);
-the variable "demand" must be the HttpServletRequest object. If the variable 'clipperState' at the end is not null, the clipper portlet has been initialized and you devriez be able to put the remote URL using the ClipperHelper API, unless something I messed up with the classpath by putting pots patch directly in your WEB-INF/lib directory. If "clipperState" is null, then the initialization is not happened for a reason, and we can explain the NullPointerException you get when you call the ClipperHelper API - although we would still need to understand why initialization has not yet happened.
Kevin
-
Jabra to blackBerry Smartphones mower - unable to pair up with BB 9900
Hello friends,
I recently got a headset Jabra Clipper BT + A2DP stereo headphones.
Unfortunately, I am not able to pair the Jabra Clipper with my BB 9900 phone :-(
I tried pairing with Nokia 5230 and it works perfectly ok and able to listen to music on it.
So I'm sure that the headset is functionally works ok.
I tried several options to pair the headset with my BB 9900 BT. The BB just 9900 do not discover the Jabra Clipper at all!
Please advice anyone, what I have; Mr. lack I can't believe that I have; ve wasted money on Jabra Clipper never working on BB 9900 :-(.
Help!
OK - Please ignore this problem, I am now able to pair the Jabra Clipper successfully without problem.
The trick is to long press on & hold the center of jabra clipper button, until the pairing is completed. (And you will hear a beep when the connection is successful)
What I was doing earlier-pressing the Center button once and the flashing light blue away... If the pairing never went thru.
-
Mower esxcli the values that are returned in Powercli
Hi guys,.
Has anyone managed to adjust the value returned when executing esxcli via powershell
For example
$myhost = get-vmhost-name esx01
$esxcli = get-EsxCli - VMHost $myhost
$esxcli.system.coredump.network.get () | FT Enabled
I'm looking for Trim the true -Enabled - to output html.
Any idea?
Concerning
Cliff
Not sure I have the question, but the output of the Get-EsxCli commands are objects.
You can not just do?
$myhost = get-vmhost-name esx01
$esxcli = get-EsxCli - VMHost $myhost
$enabled = $esxcli.system.coredump.network.get () | -ExpandProperty allowed to select
-
What mower CC2015 first grinds to halt
Hello-
I installed CC2015 and take a ride on a small project before converting officially during my longer and larger projects.
In general, CC2015 goes well, except when I CUT. When I CUT (by dragging the mouse or using the window trim) there is a HUGE SHIFT for several second which makes my job impossible the preview, and then it take 10-20 seconds after I released to the program monitor back to the timeline view. It's an obvious slowdown because the program, in general, is very responsive on my system,
I know it's CC2015 problem because I am in CC2014 every single day and not see problems like him. I am able to cut with ease. My computer configuration is not super fast, but it certainly should be able to handle this.
Intel Xeon W3565 3.2 GHz CPU
24 GB Ram
nVidia Quadro FX 3800
All the updates of Windows 8.1, run
OS / Apps on SSD
Project (images H.264) on hard disk 7200 RPM external connected via USB 3.0
Cover media on separate 1 TB 7200 RPM drive working.
Hi Ryan,
Can you try disabling the option "Preview Composite during"Trim '?" In the timeline panel under the menu 'key '. This makes cut better work?
In addition, you use the GPU acceleration? Isn't it better if you go to rendering software in your project settings, while leaving the active Composite preview? Have you updated your drivers GPU?
-
Mowing of automatic line with above forms (fillings)
Hello guys
I have a very complex 3D rendered scene wireframe 2D
The exported file I have the scenes as happy lines
the lines are never that fills up, but there are WHITE fillings used to hide some other objects behind them
I need the scene without fills up, but if I simply removed them then it will be transparent and whatever objects behind will appear
So I need a way to remove the white fill so that what's behind without using a line tool, or
This cant just be done manually
Please find the attached photo for a better understanding
You can only automatically out of Illustrator. You can't do that without a lot of manual work.
-
Mower to several objects?
Hello! I need to cut the part above the red line and place it on another place. Thing is that there are several objects, probably around 5-6 of them. This is the package template that someone else created. So, how can I do?
Copy the whole lot, paste on a new layer and draw a clipping for her mask. clip the rest with an inverse of this mask.
-
Splitting, mower, editing images - how?
Hello
Without much knowledge of technical terms of Captivate, I struggled to find all the right messages on this point-apologies if this has been covered before in detail (and I'm sure it has)
I've been dealing with Captivate 4 and recorded simulations of simple software of an activity of powerpoint for a training video.
On one of the slides that I created, I want only the first seconds or "frames" of an animation as a 'fixed image' that I can add subtitles and audio in-basically I don't need the rest of the animation that Captivate created for this slide (which is a mouse cursor expand the comments pane in powerpoint). Obivously I can't remove the slide itself.
Is there a way to see the Captivate animation created in the form of frames, so that I can split the video and / or remove any moving images I don't want? I used a calendar in iMovie and Final cut express (movie Mac edition programs) and found it very easy to do. I'm sure that Captivate will be much richer than one of these two editors of consuumer, but now have the idea how!
Any help will be much appreciated.
See you soon
Hello
Your question, I detect that you had the demonstration captured full recording of moving images? Or that you're talking about a part that has been registered by CP in FMR. You see a 'camera' on the slide icon (in the film strip)? If this is the case, open the library window, click with the right button of the mouse on the slide and choose 'search the library '. The TMF will be selected in the library (Media folder), click with the right mouse button and choose "Edit with FMR-editor. However, editing options are limited.
It might be easier to catch the 'fixed' image you want. Don't forget to select the "auto-save" (still camera, second button in the toolbar of capture) or possibly manual recording (button fourth, with the icon of mountains). Press Printscreen to get a desired image.
Hope you don't mind my explain somehow the natural workflow in CP? Unlike other screencapture software, CP excels in capturing still images every time that a change must be recorded and only switches to FMR (video mode) when really necessary, e.g. for drag and drop or other activities of the mouse. This is what we call the "AutoSave" mode Not only is resulting in much smaller that a total video recording, but the editing possibilities are much more important: you can add bearings, text captions, images, objects and their time to your wishes. This gives you much more control.
If you need more explanation, fire away, I'd be happy to help you.
Lilybiri
-
I have a field name in my DB, which can have more than one name separated by spaces. I want to cut this field name to one word all in output.
Example:
"Michael Theodor John".
Was released as simply
"Michael".
I work with trimming and find, but not quite to do things. Anyone suggestions?
Thank you very much
HenrikYou can treat the name as a list delimited by spaces and use the ListGetAt function to get the first item in the list:
#listgetat([youqueryname].name, 1, "") #. -
Human resources management stops when I raise the heart rate
I'm not talking exercise here, but something like mow the lawn. When the level of my heart going up to maybe 60% of my max (just above), my Apple Watch stops just save my heart rate. When I sit back it starts again.
If I'm actually exercise using the app it works well
What gives?
Hello
In General everyday wear, Apple Watch is designed to measure your heart rate regularly only when you're still / no active - it is normal for the readings not to take when you are active.
When recording a workout through the training app, your heart rate is rather measured continuously.
More information:
Your heart rate. What it means, and where on Apple Watch you will find. -Apple Support
-
Everything was ok, for years, then Powerpoint crashed, VLC did the same thing and I was unable to really do anything else since.
Do some research here, did reset the SMC, started in safemode, turned off and unplugged, made an another RAM reset, check the malware (Nothing) and did the EtreCheck (which I can not decipher).
I uninstalled the application Memory Cleaner, but no change.
Any suggestions?
EtreCheck version: 2.9.12 (265)
Report generated 2016-06-19 12:38:04
Download EtreCheck from https://etrecheck.com
Duration 66:34
Performance: Poor
Click the [Support] links to help with non-Apple products.
Click [details] for more information on this line.
Problem: Beachballing
Description:
Beach ball all the time, literally 3 times just writing this... While and it causes to the beach ball
iMac (27 inch, mid 2011)
[Data sheet] - [User Guide] - [warranty & Service]
iMac - model: iMac12, 2
1 2.7 GHz Intel Core i5 CPU: 4 strands
8 GB of RAM expandable - [Instructions]
BANK 0/DIMM0
OK 4 GB DDR3 1333 MHz
BANK 1/DIMM0
OK 4 GB DDR3 1333 MHz
0/DIMM1 BANK
Vacuum
BANK 1/DIMM1
Vacuum
Bluetooth: Old - transfer/Airdrop2 not supported
Wireless: en1: 802.11 a/b/g/n
AMD Radeon HD 6770M - VRAM: 512 MB
iMac 2560 x 1440
OS X Yosemite 10.10.5 (14F1808) - since the starting time: 3 hours
ST31000528AS disk0: (1 TB) (rotation)
EFI (disk0s1) < not mounted >: 210 MB
Macintosh HD (disk0s2) /: 999,35 go-go (618,79 free)
Recovery HD (disk0s3) < not mounted > [recovery]: 650 MB
HL-DT-STDVDRW GA32N)
Apple internal memory card reader
Computer, Inc. Apple IR receiver.
Apple Inc. FaceTime HD camera (built-in)
Apple Inc. BRCM2046 hub.
Apple Inc. Bluetooth USB host controller.
Apple Inc. Thunderbolt_bus.
/ etc/hosts - number: 20
Mac App Store and identified developers
/ Library/Extensions
[loading] net.telestream.driver.TelestreamAudio (1.1.1 - SDK 10.8 - 2016-06-18) [Support]
[loaded] 5 tasks of Apple
[loading] 150 tasks Apple
[operation] 57 tasks Apple
[loaded] 47 tasks Apple
[loading] 136 tasks Apple
[operation] 79 tasks Apple
[no charge] com.adobe.AAM.Updater - 1.0.plist (2014-09-14) [Support]
[loading] com.google.keystone.agent.plist (2016-03-03) [Support]
[loading] com.radiosilenceapp.agent.plist (2011-08-04) [Support]
[failure] com.adobe.fpsaud.plist (2016-04-16) [Support]
[loading] com.google.keystone.daemon.plist (2016-03-03) [Support]
[loading] com.microsoft.office.licensing.helper.plist (2010-08-25) [Support]
[loading] com.radiosilenceapp.nke.plist (2011-08-05) [Support]
[loading] com.adobe.AAM.Updater - 1.0.plist (2014-09-14) [Support]
com.apple.CSConfigDotMacCert [fail]-[...] @me.com - SharedServices.Agent.plist
[loading] com.citrixonline.GoToMeeting.G2MUpdate.plist (2016-05-27) [Support]
TomTom MySports connect Application (/ Applications/TomTom MySports Connect.app)
iTunesHelper Application (/ Applications/iTunes.app/Contents/MacOS/iTunesHelper.app)
Dropbox application (/ Applications/Dropbox.app)
Hidden Google Chrome application (/ Applications/Google Chrome.app)
[operation] com.adobe.PDApp.AAMUpdatesNotifier.94888.F89F4ED3-C0DB-4DB1-8C9A-F8252D2C7362
com.fiplab.MemoryCleanHelper [loading]
[ongoing] com.fiplab.memoryclean.118460
[ongoing] com.getdropbox.dropbox.14232
[ongoing] com.google.Chrome.13664
[ongoing] com.TomTom.mysportsconnect.1168
[loading] 370 tasks Apple
[operation] 158 tasks Apple
AdobeAAMDetect: AdobeAAMDetect 1.0.0.0 - SDK 10.6 (2014-09-14) [Support]
FlashPlayer - 10.6: 21.0.0.226 - SDK 10.6 (2016-04-22) [Support]
QuickTime Plugin: 7.7.3 (2016-05-23)
AdobePDFViewerNPAPI: 11.0.0 - SDK 10.6 (2012-09-24), [Support]
AdobePDFViewer: 11.0.0 - SDK 10.6 (2012-09-24), [Support]
Flash Player: 21.0.0.226 - SDK 10.6 (2016-04-22) obsolete! Update
Default browser: 600 - SDK 10.10 (2015-09-27)
o1dbrowserplugin: 5.41.3.0 - 10.8 SDK (2015-12-16) [Support]
SharePointBrowserPlugin: 14.4.2 - SDK 10.6 (2014-06-04) [Support]
googletalkbrowserplugin: 5.41.3.0 - 10.8 SDK (2015-12-12) [Support]
JavaAppletPlugin: 15.0.0 - 10.10 (2013-07-31) check the version of the SDK
CitrixOnlineWebDeploymentPlugin: 1.0.105 (2013-04-26) [Support]
Video Converter - Wondershare - http://www.wondershare.com (2013-11-27)
Flash Player (2016-04-16) [Support]
Time Machine not configured!
7% systemstatsd
7% Google Chrome
2% WindowServer
2% launchd
1% kernel_task
Top of page process of memory: ⓘ
1.05 GB Google Chrome Helper (10)
648 MB kernel_task
Softwareupdated 483 MB
Finder 246 MB
229 MB Google Chrome
1.05 GB of free RAM
used 6.94 GB RAM (1.79 GB being cached)
Used Swap 0 B
June 19, 2016, 09:25:25 ~/Library/Logs/DiagnosticReports/G2MUpdate_2016-06-19-092525_[redacted].crash
/ Users/USER/Library/Application Support/CitrixOnline / * / G2MUpdate
19 June 2016, 08:14:57 self-test - spent
June 18, 2016, 14:06:25 ~/Library/Logs/DiagnosticReports/G2MUpdate_2016-06-18-140625_[redacted].crash
June 18, 2016, 13:33:07 ~/Library/Logs/DiagnosticReports/quicklookd_2016-06-18-133307_[redacted].crash
/ System/Library/Frameworks/QuickLook.framework/Versions/A/Resources/quicklookd. App/Contents/MacOS/quicklookd
June 18, 2016, 11:07:08 ~/Library/Logs/DiagnosticReports/fontd_2016-06-18-110708_[redacted].crash
/System/Library/frameworks/ApplicationServices.Framework/versions/A/frameworks/ ATS.framework/Versions/A/Support/fontd
June 17, 2016, 19:56:20 ~/Library/Logs/DiagnosticReports/com.apple.photomoments_2016-06-17-195620_[reda DECT] .crash
/System/Library/PrivateFrameworks/PhotoLibraryPrivate.Framework/versions/A/fram eworks/PhotoLibraryServices.framework/Versions/A/XPCServices/com.apple.photomome nts.xpc/Contents/MacOS/com.apple.photomoments
June 17, 2016, 06:40:22 PM/Library/Logs/DiagnosticReports/App Store_2016-06-17-184022_ [redacted] .hang
/ Applications/App Store Store.app/Contents/MacOS/App
June 17, 2016, 03:56:34 PM/Library/Logs/DiagnosticReports/El Capitan Cache Cleaner_2016-06-17-155634_ [redacted] .hang
/ Applications/El Capitan Cache Cache Capitan Cleaner.app/Contents/MacOS/El cleaner
June 17, 2016, 15:49:07 /Library/Logs/DiagnosticReports/TextEdit_2016-06-17-154907_[redacted].hang
/Applications/TextEdit.app/Contents/MacOS/TextEdit
June 17, 2016, 15:05:33 /Library/Logs/DiagnosticReports/VLC_2016-06-17-150533_[redacted].hang
/Applications/VLC.app/Contents/MacOS/VLC
June 17, 2016, 15:05:33 /Library/Logs/DiagnosticReports/uTorrent_2016-06-17-150533_[redacted].hang
/Applications/uTorrent.app/Contents/MacOS/uTorrent
June 16, 2016, 09:10:52 PM/Library/Logs/DiagnosticReports/MP3 Trimmer_2016-06-16-211052_ [redacted] .hang
/ Applications/MP3 Trimmer.app/Contents/MacOS/MP3 mower
June 16, 2016, 09:10:51 PM/Library/Logs/DiagnosticReports/Microsoft PowerPoint_2016-06-16-211051_ [redacted] .hang
/ Applications/Microsoft Office 2011/Microsoft PowerPoint PowerPoint.app/Contents/MacOS/Microsoft
When you see a beachball cursor or the slowness is particularly bad, note the exact time: hour, minute, second.
These must be run as administrator. If you have only one user account, you are the administrator.
Run the Console application in one of the following ways:
☞ Enter the first letters of his name in a Spotlight search. Select from the results (it should be at the top).
☞ In the Finder, select go utilities ▹ of menu bar or press the combination of keys shift-command-U. The application is in the folder that opens.
☞ Open LaunchPad and start typing the name.
The title of the Console window should be all Messages. If it isn't, select
SYSTEM LOG QUERIES ▹ all Messages
in the list of logs on the left. If you don't see this list, select
List of newspapers seen ▹ display
in the menu at the top of the screen bar.
Each message in the journal begins with the date and time when it was entered. Highlight date back to the time you noted above.
Select the messages entered since then until the end of the episode, or until they begin to repeat, whichever comes first.
Copy messages to the Clipboard by pressing Control-C key combination. Paste into a reply to this message by pressing command + V.
The journal contains a large amount of information, almost all this is useless to solve any particular problem. When you post a journal excerpt, be selective. A few dozen lines are almost always more than enough.
Please don't dump blindly thousands of lines in the journal in this discussion.
Please do not post screenshots of log messages - text poster.
Some private information, such as your name, may appear in the log. Anonymize before posting.
When you post the journal excerpt, an error message may appear on the web page: "you include content in your post that is not allowed", or "the message contains invalid characters." It's a bug in the forum software. Thanks for posting the text on Pastebin, then post here a link to the page you created.
If you have an account on Pastebin, please do not select private in exposure menu to paste on the page, because no one else that you will be able to see it.
-
Is it possible to stop firefox linux sometimes leaving a process running after output?
I run Firefox 29, 0 - 5.fc19 on a BONE of 19 Fedora fully updated with the KDE Plasma desktop.
When I want to listen to the radio from BBC iplayer service, I open firefox and go to the site http://www.bbc.co.uk/radio4 and click on 'Listen Live', and a retractable player creates and begins to play.
If I don't want to see anything else, I close the firefox browser main leaving the retractable mower (child) firefox window, playing the Live BBC radio stream. But, if I may close this pop-out, I find that I can't restart Firefox because error message says that firefox is already running.To restart the browser, I use ksysguard to kill the process firefox - usually around 120 000 K in size - first.
I have this a known bug?
The only solution seems to be to launch another main firefox window before closing the iplayer pop-out player and then close firefox main. It is a problem because I do not always go through this rather obscure way of doing things.Hello, unfortunately it's currently a bug in the current version of firefox when you set your story to be erased at the stop of firefox (under options > privacy)-which is studied and train of attaches by the developers of mozilla with a high priority.
-
springpad icon missing after ff upgraded 23.0.1
Springpad icon does not appear in my toolbars tools or options to add again to my toolbar. When I open the page Add - ons I see it is now activated, but I can't use it.
I looked into this a little further. The Springpad extension has been removed from the site add-ons and Springpad has launched a new extension named Springpad Clipper.
According to the page versions to the old extension Springpad (in Google's cache), of 23/08/2013, this was published by Springpad on 21/12/2012:
"This is the latest version that we expect to get out of this Add on Springpad Firefox. ... Soon, we will publish a new add-on based on the mower. At this time, we invite you to start using the new add-on trimmer as well as the web application at Springpad.com, where we will continue to make frequent updates to the support of all of our users. »
More information about the change:
- Springpad the browser Extensions: New Extension of Clipper to replace the old features -Springpad blog
- https://addons.Mozilla.org/en-us/Firefox/addon/springpad-Clipper/
You may need to disable the old extension (apparently broken) to avoid a conflict with the new. You can do so here:
Firefox orange (or the Tools menu) button > addons > Extensions category
-
Watch a video on youtube and went to a daily on forge Empires. I couldn't connect to forge Empires, but the video has stopped and I could not connect. FlashDrive stopped 3 days ago or not worked since. Everything is up-to-date. I uninstalled and reinstalled, I have same uniinstalled and downgraded, still does not work. Never had any problems with it before
I posted the answer on another thread - basically, I'm having the same problem and I did everything everyone suggested and it still does not - but I also find that my lawnmower for Polyvore is also is no longer works on Firefox - in fact, it starts to work and then just - stops every hour every time. I downloaded a new lawn mower and still the same problem - the two problems (Flash and polyvore) started at the same time - worked well before and both work very well on IE - which I hate to say that I may just have to-if anyone has this problem and managed to fix it please tell me how - I want to stay with Mozilla.
-
HP Envy 750-129ns: HP Envy 750-129ns not find Wifi hardware
So I finally got the windows 7 installed via ports usb3 with Paul on this forum. My problem now is that some drivers have not installed right, and my pc cannot see my 'Realtek RTL8723BE and RTL8188EE 802.11b/g/n Wireless LAN', so I can't connect to the internet.
Ive looked online, tried to download some drivers from the HP Support for windows 7, but still can't make it work? must I just keep downloading all drivers windows 7 for my PC and install them, well those who have a yellow triangle, or they have a fix for eaier?
Thanks again for any help
Alex
Hey, Alex:
The list of parts for your PC shows that it comes with the wireless card INT 3165 m2 MOW 11ac.
http://PartSurfer.HP.com/search.aspx?SearchText=P3H74EA
You need these drivers for this model wlan card...
Wireless:
This package contains drivers for the Intel Wireless LAN card of supported models running a supported operating system.
FTP://ftp.HP.com/pub/SoftPaq/sp76501-77000/sp76890.exe
Bluetooth:
This package contains the installation package driver for the Bluetooth of Intel in the laptop models running a supported operating systems.
Maybe you are looking for
-
Language issue in Outlook Express
I just started using my new laptop. Outlook Express has been pre-installed. The language is correct in the Panel, but is set to french in Outlook. It is not an option to change it in options > spelling. Anyone know how I can change the setting to
-
I recently had my hotmail account blocked.
I clicked on the menus of the various media and was in a hot mail page when I received an IM message and then very quickly I had someone take control away from my computer. I was told they were techincial in favor of microsoft. As they were cleaning
-
Windows 7, my printer HP 7410 says "failed to parse. Tried to download the software and driv er at hp, my systems says no driver. where can I get the driver for scanning
-
The EqualLogic PS6100 firmware update
Hello We have EqualLogic 6100 with SAS drives and want to update the firmware of 5.2.2 to version 6.0.5. It is a simple process? Thank you
-
Could not connect to the? ManageGroups by using the credentials of weblogic
Hi allWe have implemented a new environment of OBIEE (OBIEE 11.1.1.1.9) in a linux environment. I was faced with some problems in the editting BI Publisher reports that have migrated from 10g environment.I found a useful information from the discussi