MRI / sealing server / authentication / Active Directory

Similar Questions

• vCenter server to active directory

  According to best practices of VMware.

  You must add the vcenter server to active directory?

  Yes, it is recommended. However, I usually deploy vcenter for my tests and almost 99% of the time, I didn't add VM vCenter to the domain and it works perfectly for me in the test environment. Later, I use to add domains as the source of identity to give permission to the domain users.

  If the production environment, it is always better to add to the domain.

• Three companies using Windows Server 2008 Active Directory and physical locations?

  The research of three companies using Active Directory in Windows Server 2008 and also how many physical locations?

  Answers forum is addressing issues technical home user.

  If you don't have a technical question, you can try to use Bing to search for the information you are looking for.

  If you are having problems with Active Directory, you can create a new post on the TechNet forums for assistance.
  http://social.technet.Microsoft.com/forums/en/category/WindowsServer/

• New authentication active directory on wlc 2504

  Hello

  There is problem with very often a new authentication for servers active directory. Every time only if:

  -loose client wlan/wifi because of the wifi hole or low RSSI

  -output of build for a while customer

  -wlan loose customer due to problem with homelessness (slow, not perfect)

  There is possibility to keep authenticated users? I had hope that options: sleep customer, max session timeout, max idle timeout

  help, but they do not work for me :(

  My access point (2702) are all in a group flexconnect. WLC 2504 (8.1.102.0). My security in WLAN config is:

  Layer2: wpa + wpa2, PSK

  Layer 3: web policy, authentication with LDAP servers + asleep on client

  I always try to improve the radio covers n fast roaming (11 k, r, v) but if someone leaves the area wifi, to do authenticated which is a little annoying...

  Thanks for any advice or an index

  Peter

  You want people who re - attach to your network for to re-authenticate.  It's a good thing.  We do not want people using the old credentials, or expose you to a security breach.

  This behavior is by design - and good.

• Is - it possible/supported to join a vCenter Server Appliance for a Small Business Server 2011 Active Directory Windows?

  Hello experts,

  I wonder if it's possible/supported to join the vCenter Server Appliance for a small business 2011 Active Directory Windows Server (basically a Microsoft Windows Server 2008 R2 Active Directory).

  Any help will be greatly appreciated.

  Thank you and best regards,

  Massimiliano

  You can... However, it would be, at least in what we saw, more easy to reach the device in the announcement via the CLI

  http://KB.VMware.com/kb/2002626

• How the Network Server 2003 Active Directory, DNS, DHCP with other virtual machines

  Hi ~

  I am trying to create a network within the workstation test environment. I did research on everyday and can't find a direct answer. I want to do is use the Server 2003 functions and create my own private network with the 2 other VMS XP Active Directory domain controller. I want both of these XP machines to be able to log into the domain of the 2003 server. I have never used or learned 2003 server, that's why I do this.

  What do I need to create a custom network? can I use bridged, host-only, nat? Stop the service DHCP from Vmware workstation?

  What is your host operating system and how to get its IP address? What is the result of: ipconfig/all in Windows or Linux ifconfig-a?

  Disable the firewall during installation.

  I don't think that the network connection is all that matters (if you care on the internet or a local area network LAN) for guests, while they are the same. I always use filled but the only thing that really counts, IMHO, is that the host, guests of the XP and W2003 prompt are all on the same subnet and the server has a static IP address.

  I almost always use open for all guests. I put all the guests for static IP addresses on the same subnet as the host. I put the DNS server for XP clients to the IP address of the host to W2003. I have install the DNS role on W2003 server and then install the role of domain controller (AD), with the help of a domain name like lousdomain.local. Then you should be able to join XP guests to this area.

  It's all exactly the same as if it was real machines.

  My default installation is filled with the IP host is defined on 10.0.3.5, a gateway of 10.0.3.1 (my ADSL router), my server W2003 (or W2008) the 10.0.3.4 value and guests XP, the value to something like 10.0.3.6, 10.0.3.7 etc. Again, once again, is not the same as little care as long as they are on the same subnet.

  What are the errors you get when you try to set up?

  What you get from ipconfig/all on each of the guests?

  Lou

• How to create server in Active Directory

  post the anser to * address email is removed from the privacy *.

  Hey Zahurus,

  The Microsoft Answers community focuses on media consumption. For THIS Pro related questions please join the TechNet community for assistance. The link below will take you to Windows Server forum that focuses on Directory Services:
  TechNet - Windows Server - Directory Services

• authentication Active Directory iDrac 6 - test ok but the connection failed

  Hi all

  I try to activate the AD authentication on my iDrac6 (v1.97).

  When I run the test after you have configured it, everything is ok. But when I try to log in with the ad on iDrac user I've always had a "connection error. Failure of the credentials. Please Try Again ".

  Am I missing something? I have to active anything else? Where can I get more newspaper?

  Thank you in advance for any help

  --

  Alex

  My bad, it was a certificate error which seems was not a problem for the tests, but was a true for connection...

  Now, everything works fine now

• WINDOWS SERVER 2012 - ACTIVE DIRECTORY DOMAIN CONTROLLER

  Hi all

  I created AD - DS server in 2012, I want to add all my client computer windows developer, but they are in different network? Is it possible to connect? If means pls answer

  Hello

  Please post your question in Server TechNet Forums.

  http://social.technet.Microsoft.com/forums/WindowsServer/en-us/home?category=WindowsServer

  See you soon.

• Authentication Active Directory for Jabber video

  Hello

  I managed to configure my control of VCS to join my AD domain name, so now my video Jabber authenticate accounts with the credentials of the AD.  I downloaded certificates appropriate for VCS to make connecting to AD is encrypted TLS.

  I use the Provisioning Extensions on X7.2 and TMS 13.2.1.

  Before the addition of the VCS to the domain AD and passage to TMSPE, Movi accounts would authenticate on the (Agent of TMS) database on the VCS control, regardless of the authentication request came control VCS, or has been transferred from the highway of VCS.  Now Jabber clients trying to authenticate on the highway to VCS fail if the default Zone or subzone default are set to "verify the credentials.  If I change the settings of the area to be "treat as authenticated"... it works, but they are not actually be authenticated, since no matter what password is accepted.  Of course, this isn't a good idea.

  So my question is basically, what I'm missing?  Am I supposed to join the motorway VCS to AD as well?  Given the external location of the highway, it's a less-than-desirable solution; No there is no way to pass authentication to AD requests to the VCS control?

  I read 'Cisco_VCS_Authenticating_Devices_Deployment_Guide_X7-2' and the relevant sections of the Admin Guide VCS and I don't know if I'm missing it but I can't find information to lead me in the right direction here.

  Hi Anthony,.

  It is not necessary to join the motorway to listing! Highway should pass any authentication control and should be able to register without the need to join the domain.

  Ideally, requests authentication from the highway should be sent to the control and control put in question the user for credentials.

  for authentication of clients jabber by highway, you should put the area crossed the vcs control to check the credentials and on Highway information, keep the default zone do not check the credentials.

  Also check if you set the ADS services on the highway? If so, turn it off...

  Thank you

  Alok

• Windows Server 2008 R2, with two Windows Storage Server 2003 Standard: How can I add the MAC authentication on top of Active Directory authentication for a storage servers?

  I have two running Windows Storage Server 2003 storage servers in a domain R2 Windows Server 2008 Standard.  On top of the Active Directory authentication, I want to add authentication of MAC address for the access to one of the storage servers.  In this scenario, an authenticated user is unable to log on to the target storage server unless the user is also on one of the computers MAC address accepted.  All domain users will have access to other folders and files as configuration storage server in Active Directory.  I already have a user access to installation by the permissions for folders on the storage server target, but I still want to restrict access to specific computers as well.  For what it's worth the server hardware is HP Proliant DL360 G5 for the Standard Server 2008 R2 and server HP Proliant DL185 G5 for two Storage Server 2003 computers.  I don't want to have MAC address authentication as the main means of access control to the network, only for the storage server a as an addition to control Active Directory.

  Hi Kerry,

  The question you posted would be better suited in the TechNet Server Forums since we have dedicated to this support; We recommend that you post your question in the TechNet Forums to get help:

  http://social.technet.Microsoft.com/forums/en-us/category/WindowsServer

  Keep us informed on the status of the issue.

• OAM and MS integration Active Directory on non-Windows Server environment

  I begin by saying that I'm dealing with a heterogeneous environment here where several systems are managed by different management levels. Our Oracle systems chose to go all * nix (Solaris Oracle and Red Hat Linux) and so we do not have a single Windows Server in our Oracle services and would really like to keep it this way that we prefer to keep a uniform platform in all of our Oracle servers.  However, the side our Department Office has chosen to use Microsoft Active Directory, and now we want to integrate and perform authentication against it for our protected sites OAM.  We are in the initial phase of installation, but we didn't want to implement a critical server like OAM on the Windows platform and focus rather OAM running on a Red Hat Linux server to Active Directory.  We will also use OID as run us portal but do not want to use it as our authority for Oracle products authentication (local policy is that Active Directory is the authority of the credential is valid on the site as we head towards the true Single Sign On our desktop and web applications).  I have a few questions.
  
  1. it is possible using native or to run the version of Windows of OAM?
  2. If you must run OAM on Windows to use AD for authentication, is it possible to install the Windows of OAM version as kind of an interface for our main server of OAM running under Red Hat Linux to make the AD Auth?
  3. can it be done using some kind of interface such as Oracle Virtual Directory in interface with the interface LDAP to Active Directory MS?

  Hi David,

  Answers online

  1. it is possible using native or to run the version of Windows of OAM?
  You can run all servers in OAM on * nix and just point to AD as a source of data on the machine: port AD running on OAM. There is no need for the components of the OAM on Windows.

  2. If you must run OAM on Windows to use AD for authentication, is it possible to install the Windows of OAM version as kind of an interface for our main server of OAM running under Red Hat Linux to make the AD Auth
  As above, this is not necessary.

  3. can it be done using some kind of interface such as Oracle Virtual Directory in interface with the interface LDAP to Active Directory MS?
  Yes, it is quite possible. Even if it is not necessary in your situation, it provides more flexibility front the user store with OVD, for example when the addition/change of name of Windows domains, or by specifying some branches for users and so on.

  Kind regards
  Colin

• Windows server 2003 users automatically gets an email when I set up in Active Directory?

  Original title: Windows Server 2003

  It comes to the associated user account.  I need to add users that I know how to do, but they will automatically get an email when I set up in Active Directory? The e-mail server has been implemented.

  I suggest you post your question on the TechNet Forums, where we are the support technicians who are well equipped with knowledge about Windows Server and Active Directory. I've added the link below on the home on TechNet forums.

  http://social.technet.Microsoft.com/forums/en-us/home

  See you soon!

• authentication Microsoft Active Directory iDRAC 7

  Hello

  I installed Microsoft Active Directory on iDRAC 7 with some very basic options (no certificate, no Single Sign-On, not Kerberos Keytab, the Standard schema). Everything works fine.

  The problem is that we have 2 forests with full trust configured between them and iDRAC is not able to authenticate the users of both of them.

  Basically, we have the single domain on 1 security group and pair the users of these two forests (1 and foret2). If I add domain (DC) IPs for two areas-forest controllers, authentication fails on the first domain controller, if the user is a different domain (check does not reach the second DC IP to verify the user). The error I get:

  ERROR: failed to bind: Invalid credentials, 80090308: LdapErr: IDDM-0C0903A9, comment: AcceptSecurityContext error, 52nd data, v1db0: [email protected] host = 192.168.0.1.

  [email protected] - 1 user
  192.168.0.1 - foret2 DC IP

  Does IDARC support AD authentication for users of forest separated couple?

  Thank you

  iDRAC do not support authentication Active Directory for the domain of the unique forest.

• Setting of Windows Active Directory LDAP in OBI

  Hello
  
  I wonder if someone has an experience of connection authentication active directory windows in BI of Oracle 11 g 11.1.1... Release. I have set up the LDAP with Microsoft AD (2003 Server) Protocol but I can connect with the main single user (who is a member of the ad group), but I can't connect through any other user in this group.
  
  I appreciate any advice/help in this regard.

  Hello
  Not this one.please check it you LDAP team and get the

  good user and details of group objects. If you have permission you are LDAp server you find the user and group

  and then just right click and select object tab here you could see * (look at the canonical name of the object) * this path of the particular user structure... also you can generate the file LDIF.txt and find you're object.

  Thank you

  Deva