New authentication active directory on wlc 2504

Similar Questions

• MRI / sealing server / authentication / Active Directory

  Hello
  
  I want to use 11g "Sealing Server" to unsealing documents.
  
  Documentation:
  "The current version supports basic HTTP authentication.
  http://download.Oracle.com/docs/CD/E17904_01/user.1111/e12326/isvsealedcontent002.htm#sthref46
  
  Is it posible to use authentication Windows Active Directory with "sealing Server?
  
  
  Thank you.

  Hello

  The authentication scheme supported only for sealing services is basic authentication.

  Kind regards
  Frank.

• authentication Active Directory iDrac 6 - test ok but the connection failed

  Hi all

  I try to activate the AD authentication on my iDrac6 (v1.97).

  When I run the test after you have configured it, everything is ok. But when I try to log in with the ad on iDrac user I've always had a "connection error. Failure of the credentials. Please Try Again ".

  Am I missing something? I have to active anything else? Where can I get more newspaper?

  Thank you in advance for any help

  --

  Alex

  My bad, it was a certificate error which seems was not a problem for the tests, but was a true for connection...

  Now, everything works fine now

• Authentication Active Directory for Jabber video

  Hello

  I managed to configure my control of VCS to join my AD domain name, so now my video Jabber authenticate accounts with the credentials of the AD.  I downloaded certificates appropriate for VCS to make connecting to AD is encrypted TLS.

  I use the Provisioning Extensions on X7.2 and TMS 13.2.1.

  Before the addition of the VCS to the domain AD and passage to TMSPE, Movi accounts would authenticate on the (Agent of TMS) database on the VCS control, regardless of the authentication request came control VCS, or has been transferred from the highway of VCS.  Now Jabber clients trying to authenticate on the highway to VCS fail if the default Zone or subzone default are set to "verify the credentials.  If I change the settings of the area to be "treat as authenticated"... it works, but they are not actually be authenticated, since no matter what password is accepted.  Of course, this isn't a good idea.

  So my question is basically, what I'm missing?  Am I supposed to join the motorway VCS to AD as well?  Given the external location of the highway, it's a less-than-desirable solution; No there is no way to pass authentication to AD requests to the VCS control?

  I read 'Cisco_VCS_Authenticating_Devices_Deployment_Guide_X7-2' and the relevant sections of the Admin Guide VCS and I don't know if I'm missing it but I can't find information to lead me in the right direction here.

  Hi Anthony,.

  It is not necessary to join the motorway to listing! Highway should pass any authentication control and should be able to register without the need to join the domain.

  Ideally, requests authentication from the highway should be sent to the control and control put in question the user for credentials.

  for authentication of clients jabber by highway, you should put the area crossed the vcs control to check the credentials and on Highway information, keep the default zone do not check the credentials.

  Also check if you set the ADS services on the highway? If so, turn it off...

  Thank you

  Alok

• authentication Microsoft Active Directory iDRAC 7

  Hello

  I installed Microsoft Active Directory on iDRAC 7 with some very basic options (no certificate, no Single Sign-On, not Kerberos Keytab, the Standard schema). Everything works fine.

  The problem is that we have 2 forests with full trust configured between them and iDRAC is not able to authenticate the users of both of them.

  Basically, we have the single domain on 1 security group and pair the users of these two forests (1 and foret2). If I add domain (DC) IPs for two areas-forest controllers, authentication fails on the first domain controller, if the user is a different domain (check does not reach the second DC IP to verify the user). The error I get:

  ERROR: failed to bind: Invalid credentials, 80090308: LdapErr: IDDM-0C0903A9, comment: AcceptSecurityContext error, 52nd data, v1db0: [email protected] host = 192.168.0.1.

  [email protected] - 1 user
  192.168.0.1 - foret2 DC IP

  Does IDARC support AD authentication for users of forest separated couple?

  Thank you

  iDRAC do not support authentication Active Directory for the domain of the unique forest.

• DMVPN and active directory (logon)

  Hi all

  We have a DMVPN configuration between a few sites and everything seems fine, except that the logons through the VPN for a new domain active directory are very slow (10-15 minutes). I believe that the problem may be with the fragmentation of tunnel and packages such as AD is configured correctly.

  I am looking for some recommendations or advice on the MTU and TCP MSS settings see if it solves the problem.

  both the hub and the spokes are currently with the following settings MTU and MSS (ive removed some irrelevant information) Tunnel0 was originally a mtu of 1440 but if whatever it is 1400 is even worse.

  Thank you

  interface Tunnel0

  IP 1400 MTU

  IP nat inside

  authentication of the PNDH IP SP1

  dynamic multicast of IP PNDH map

  PNDH network IP-1 id

  IP virtual-reassembly in

  No cutting of the ip horizon

  source of Dialer0 tunnel

  multipoint gre tunnel mode

  0 button on tunnel

  Profile of ipsec protection tunnel 1

  interface Dialer0

  MTU 1492

  the negotiated IP address

  NAT outside IP

  IP virtual-reassembly in

  encapsulation ppp

  IP tcp adjust-mss 1452

  Dialer pool 1

  Dialer-Group 1

  Darren,

  In general the prolem is due to Kerberos on UDP traffic.

  There are several ways you can solve the problem:

  (1) transition to Kerberos over TCP. (suggested)

  (2) setting the MSS on the interface of tunnel not on telephone transmitter (recommended)

  (3) allowing the PMTUD tunnel (strongly recommended).

  M.

• Setting of Windows Active Directory LDAP in OBI

  Hello
  
  I wonder if someone has an experience of connection authentication active directory windows in BI of Oracle 11 g 11.1.1... Release. I have set up the LDAP with Microsoft AD (2003 Server) Protocol but I can connect with the main single user (who is a member of the ad group), but I can't connect through any other user in this group.
  
  I appreciate any advice/help in this regard.

  Hello
  Not this one.please check it you LDAP team and get the

  good user and details of group objects. If you have permission you are LDAp server you find the user and group

  and then just right click and select object tab here you could see * (look at the canonical name of the object) * this path of the particular user structure... also you can generate the file LDIF.txt and find you're object.

  Thank you

  Deva

• unloading of feature to make dhcp off the WLC and put it on Active Directory.

  I need to use the feature of unloading to dhcp off the WLC and put it on Active Directory.  Someone at - it a walkthrough or a page for this?  I know it's just a checkbox and a redirect to the new dhcp server, but where the hell is the configuration on the WLC?

  Thank you!

  -anne

  You can go there.

  http://www.Cisco.com/c/en/us/TD/docs/wireless/controller/7-4/configuration/guides/consolidated/b_cg74_CONSOLIDATED/b_cg74_CONSOLIDATED_chapter_01001001.html

  Point to your existing ad integrated DHCP server.

• Active Directory users are authenticated web-auth (web-auth has only LOCAL users)

  Hello

  I have a model WLC 4404 with software version 4.2.205.0.
  I have 2 SSID: Wireless and invited
  -Wireless: using [WPA + WPA2] [Auth (802. 1 X)]
  -Guests: use Web-Auth

  In the guests of SSID (WLAN-> Edit > AAA security servers I have not all enable server - option there is NOT and not activated-).

  I do not understand that the request for authentication is attempted ONLY locally to the WLC but not in the ACS (ACS has been configured in security-> RADIUS-> authentication).

  When a user authentication Web Page inserts user and password of SSID wireless (users who need to be authenticated in Active Directory via ACS) it is authenticated.

  I need to change this behavior.

  There are a few options depending on what you are using the code.

  6.0 and higher, there is an option in the WLAN directly, select only LOCAL.

  5.2 below, under Radius authentication servers, uncheck the box for the user of the network.  This check box allows the WLC to use the servers in the world, which means that if it is not precisely defined under the WLAN, it can / will still be used

• WLC 5508 Active Directory / LDAP integration to authenticate

  Hello

  I am redundant deployment WLC 5508 with 4 VLANS and 4 SSID matches it, everything works fine, now I have to do the below, then please put your valuable comments and advice.

  1. I need all users authenticated with existing Active Directory/LDAP wireless

  2. I create accounts invited in my ad and go to the guests, so comments should only Internet access except the company's resources

  2. How can I get my VoIP VLAN for wireless phones. I want to only wireless phones to connect to VLANS voice. No internet access on VLan VoIP

  Concerning

  Dinesh

  Hello

  1. I need all users authenticated with existing Active Directory/LDAP wireless

  2. I create accounts invited in my ad and go to the guests, so comments should only Internet access except the company's resources

  YEARS 1 & 2 - the link below provides the example config and also the memorandum of understanding on the conditions depth, please go through the link atleast once...

  http://www.Cisco.com/en/us/products/ps6366/products_configuration_example09186a0080a03e09.shtml

  2. How can I get my VoIP VLAN for wireless phones. I want to only wireless phones to connect to VLANS voice. No internet access on VLan VoIP

  YEARS - you can configure the auth required for WLAN voice and then NAT this interface VLAN so that he won't get out of the internet!

  Let me know if that answers your question and please do not forget to rate traore useful messages!

  Concerning

  Surendra

• Cisco Secure ACS groups 5.1 Active Directory and RSA Authentication Manager 7.1 for profiles

  / * Style definitions * / table. MsoNormalTable {mso-style-name: "Table Normal" "; mso-knew-rowband-size: 0; mso-knew-colband-size: 0; mso-style - noshow:yes; mso-style-priority: 99; mso-style - qformat:yes; mso-style-parent:" ";" mso-padding-alt: 0 cm 0 cm 5.4pt 5.4pt; mso-para-margin: 0 cm; mso-para-margin-bottom: .0001pt; mso-pagination: widow-orphan; font-size: 11.0pt; font family: 'Calibri', 'sans-serif"; mso-ascii-font-family: Calibri; mso-ascii-theme-make: minor-latin; mso-fareast-font-family:"Times New Roman"; mso-fareast-theme-make: minor-fareast; mso-hansi-font-family: Calibri; mso-hansi-theme-make: minor-latin ;}"}

  Hello

  I'm deploying an ACS connected to an RSA AuthManager (that is connected to an Active Directory domain)

  I create several groups within the Active Directory server, I try to give to users for their groups different access rights.

  I tried to define an access policy "NetOp/NetAdm" and two authorization rules:

  Rule-1 AD - AD1:ExternalGroups contains all dir. INTRA/groups/NETOP 'Auth for net operators' 0

  Rule 2 AD - AD1:ExternalGroups contains all dir. INTRA/groups/NETADM 'Auth net admin' 0

  Default: refuse

  In the identity, I have configured the RSA identity source, so that users get authenticated by the RSA Authentication Manager.

  But I still refuse to get access, RSA authentication is successful, but the group membership, active directory does not work, even with the unix attributes or group principal defined for the user.

  My question is this valid configuration scenario? Is there another way to define several profiles according to the Group of users of external source?

  The stages of monitoring:

  Measures

  Request for access received RADIUS 11001

  11017 RADIUS creates a new session

  Assess Service selection strategy

  15004 Matched rule

  Access to Selected 15012 - NetOp/NetAdm service policy

  Evaluate the politics of identity

  15004 Matched rule

  15013 selected identity Store - server RSA

  24500 Authenticating user on the server's RSA SecurID.

  24501 a session is established with the server's RSA SecurID.

  24506 check successful operation code

  24505 user authentication succeeded.

  24553 user record has been cached

  24502 with RSA SecurID Server session is closed

  Authentication 22037 spent

  22023 proceed to the recovery of the attribute

  24628 user cache not enabled in the configuration of the RADIUS identity token store.

  Identity sequence 22016 completed an iteration of the IDStores

  Evaluate the strategy of group mapping

  15006 set default mapping rule

  Authorization of emergency policy assessment

  15042 no rule has been balanced

  Evaluation of authorization policy

  15006 set default mapping rule

  15016 selected the authorization - DenyAccess profile

  15039 selected authorization profile is DenyAccess

  11003 returned RADIUS Access-Reject

  Thank you

  Christophe

  I think you need to do is to create a sequence of identity with RSA as a selection in

  Authentication and recovery research list of attributes and AD in the additional attribute list recovery research. Then select this sequence as a result of the politics of identity for the service

• How to disable authentication for application installation in active directory

  I'm a rookie,

  I am system admin at my company and I've implemented active directory in my company.

  every time an employee application, then ask his user name and password and it's good.

  However, there are some users VIP who doesn't want that. So, how can I disable it only for some users so that they can install applications.

  Please help me.

  I am a new joinee in my company and want to learn a lot of things.

  Please help me to provide the best it services my copmpany.

  All want to help me, then please write to me on

  Kind regards

  Faraz

  Hi Faraz,

  Thanks for posting your question in the Microsoft Community forums.
  The description of the problem, I see you want to disable authentication to install applications in active directory for some users.
  As the computer is connected to the domain network, the question you posted would be better suited to the TechNet community. Please visit the link below to find a community that will provide the support you want.
  http://social.technet.Microsoft.com/forums/en/w7itpronetworking/threads
  Hope this information helps you. If you need additional help or information on Windows, I'll be happy to help you. We, at tender Microsoft to excellence.

• LobbyAdmin authentication via Active Directory

  Hi all

  I have a requirement to apply webauth on my network of comments and therefore need to configure the functionality of lobbyadmin. We will have several users login (Help Desk, receptionists, etc.) using an account of lobbyadmin and from a management point of view I prefer simply to drop existing users in a group active directory that grants them access to the rights of the lobbyadmin.

  I know the authentication can be done through RADIUS - but is it possible using AD?

  See you soon

  Rob

  No I don't think so.

  Since the lobbyAdmin are like the users who try to access the WLC through management. That's why somebody has to tell the WLC what privilege therefore have user account. Basically, LDAP can provide this info is why you ought to use the radius server if you want to use external users from an LDAP.

  But if what you want is to authenticate users AD in your authentication on the web, it can be done:

  http://www.Cisco.com/en/us/products/ps6366/products_configuration_example09186a0080a03e09.shtml

  Let me know if it answers the question.

• OBIEE 11.1.1.7.0 works is not after you have configured to use authentication MSAD (Active Directory)

  Hi all

  I'm trying to configure OBIEE 11 g to use the MSAD (Active Directory) authentication. I followed the instructions of Configuration Oracle BI with Oracle Internet Directory , but after a restart all services, I do not get connect OBIEE. I've hearded that there is a bug in this version (11.1.1.7.0) when you rearrange the suppliers and put the new (that you created) as the frist, followed by DefaultAuthenticator and DefaultIdentityAsserter providers.

  Someone had this problem? How to resolve that? Is there a URL or DocID teach how this is set correctly?

  Thanks in advance,

  Concerning

  is even if you have 10 k + users it will show only 1000, this is the limitation, but you can still find the users from the top by clicking on customize the table, it options you give the criteria in filter and view display, you can select the column by which you can search for example: by using the name or description, or Provider(AD or Default) in this path , you can search for specific users you want to see or Alvaro * so it will give u the list whose name start with Alvaro

  I hope it helps brand if not

• Windows 7 crashes when adding a new active Directory user

  When I try to add a new user if user (connected to active directory) when I type accounts manage user accounts, it hangs it loads for more than 5 minutes. Then, when I try to add a new user, he is suspended for another 5 minutes, then I can choose the type of account (Standard or Admin) it hangs for more than twenty minutes. Then the following error message appears:

  The user could not be added because the following error has occurred:

  The trust relationship between this workstation and the primary domain failed.

  This issue is beyond the scope of this site and must be placed on Technet or MSDN

  http://social.technet.Microsoft.com/forums/en-us/home

  http://social.msdn.Microsoft.com/forums/en-us/home