Similar Questions

• Windows server 2003 users automatically gets an email when I set up in Active Directory?

  Original title: Windows Server 2003

  It comes to the associated user account.  I need to add users that I know how to do, but they will automatically get an email when I set up in Active Directory? The e-mail server has been implemented.

  I suggest you post your question on the TechNet Forums, where we are the support technicians who are well equipped with knowledge about Windows Server and Active Directory. I've added the link below on the home on TechNet forums.

  http://social.technet.Microsoft.com/forums/en-us/home

  See you soon!

• WLC 5508 Active Directory / LDAP integration to authenticate

  Hello

  I am redundant deployment WLC 5508 with 4 VLANS and 4 SSID matches it, everything works fine, now I have to do the below, then please put your valuable comments and advice.

  1. I need all users authenticated with existing Active Directory/LDAP wireless

  2. I create accounts invited in my ad and go to the guests, so comments should only Internet access except the company's resources

  2. How can I get my VoIP VLAN for wireless phones. I want to only wireless phones to connect to VLANS voice. No internet access on VLan VoIP

  Concerning

  Dinesh

  Hello

  1. I need all users authenticated with existing Active Directory/LDAP wireless

  2. I create accounts invited in my ad and go to the guests, so comments should only Internet access except the company's resources

  YEARS 1 & 2 - the link below provides the example config and also the memorandum of understanding on the conditions depth, please go through the link atleast once...

  http://www.Cisco.com/en/us/products/ps6366/products_configuration_example09186a0080a03e09.shtml

  2. How can I get my VoIP VLAN for wireless phones. I want to only wireless phones to connect to VLANS voice. No internet access on VLan VoIP

  YEARS - you can configure the auth required for WLAN voice and then NAT this interface VLAN so that he won't get out of the internet!

  Let me know if that answers your question and please do not forget to rate traore useful messages!

  Concerning

  Surendra

• Windows Active Directory

  Can I use Radius AAA on an ASA 5505 to block outbound access by user name of users in a group? Thank you

  Hello

  I think you might be interested on the verification of the new feature of 8,4 ASA: Firewall identity

  Identity of firewall

  Generally, a firewall is not aware of the identity of the user and, therefore, impossible to implement identity-based security policies. The identity of the ASA firewall provides more granular control of access based on the identity of users. You can configure access rules and security policies based on the user and groups rather than name names by source IP addresses. The ASA applies security policies based on an association of IP addresses to the Windows Active Directory connection information and reports on the events based on the names of mapped instead of IP addresses of network users. Identity firewall integrates with the Active Directory window in conjunction with an external Agent of Active Directory (AD) that provides the mapping of the real identity. The ASA uses Windows Active Directory as a source to retrieve the identity information of the current user for specific IP addresses. In a company, some users log on the network using other authentication mechanisms, such as authentication with a web portal (passage of proxy) or by using a VPN. You can configure the firewall of identity to allow these types of identity-based authentication under access policies. We introduced or modified the following commands: user-identity enable user-default-domain identity, user-identity domain, logout-probe user-identity, user-identity inactive-user-timer, user-identity poll-import-user-group-timer, user-identity netbios-response-fail action, user-identity user-not-found, user-identity ad-agent-down action, user-identity action mac-address-mismatch, user-identity domain-controller-down action, user-identity ad-agent active-user-database, user-identity ad-agent hello-timer, user-identity ad-aaa-server agent, user-identity update user import-, user-identity static user, ad-agent-mode, dns domain-lookup, dns poll-timer , dns expire-entry-timer, user of the object-group, show the identity of the user, see the dns, Configure clear - user identity, clear dns, debug the identity of the user agent test ad-aaa-Server.

  Please find the Configuration Guide Chapter referring to the firewall attached identity.

  Hope that does you in the right direction.

  Kind regards.

• MS-Windows Active Directory

  Version of forms: Forms [32 bit] Version 10.1.2.3.0 (Production)
  
  Is there a way to access Active Directory of MS Windows in my version of forms?
  
  
  Thank you
  
  Added the: my goal is to save a database table referenced on the Directory user active directory.
  
  Published by: DM 6 Sep, 2010 15:08

  Active Directory users are stored in a LDAP directory. a simple way would be to use the dbms_ldap package:

  http://download.Oracle.com/docs/CD/B10501_01/AppDev.920/a96612/d_ldap2.htm#1019412

  for example:
  http://www.Oracle-base.com/articles/9i/LDAPFromPLSQL9i.php

  see you soon

• Installation of Active Directory LDAP for the editor

  I hope it is easy.
  I have 10.3.4.1 BEEP and answers/dashboards. Answers/dashboard currently use active directory for authentication. I would like to do the same thing with BEEP.
  How can I do?
  Since I have now two products I have to go to a place of business?
  
  
  Article links would be fine. There is nothing in the manual of the editor on LDAP or Security (really). The websites I found display a file xml with a series of parameters, but they seem to refer to an earlier version of publisher.
  
  Should be easy points.

  Did you check this: http://download.oracle.com/docs/cd/E12844_01/doc/bip.1013/e12188.pdf?

  Your version is 10.1.3.4.1?

  Thank you!

• active directory (LDAP) access with PL/SQL

  I'm doing using the DBMS_LDAP PL/SQL Package.
  http://download.Oracle.com/docs/CD/B10501_01/network.920/a96577/dbmsldap.htm#1003287
  
  
  The bind_simple function requires a user name and password.
  I don't know what to spend.
  I had 0 output if I use my logn to windows.
  
  SET SERVEROUTPUT ON
  
  declare
  ldap_host VARCHAR2 (256);
  ldap_port VARCHAR2 (256);
  ldap_user VARCHAR2 (256);
  ldap_passwd VARCHAR2 (256);
  ldap_base VARCHAR2 (256);
  my_message DBMS_LDAP.message;
  my_attrs DBMS_LDAP.string_collection;
  ma_Session dbms_ldap. SESSION;
  retval PLS_INTEGER;
  
  Start
  ldap_host: = 'abc.com ';
  ldap_port: = '389';
  ldap_base: = "dc = abc, dc = com';"
  
  ma_Session: = dbms_ldap.init(ldap_host,ldap_port);
  
  DBMS_OUTPUT. Put_line (RPAD ('Ldap session', 25,' ') |) ': ' ||
  RAWTOHEX (substr (my_session, 1, 8)).
  '(retourné depuis init)");
  
  -bind to the directory
  retval: = DBMS_LDAP.simple_bind_s (ma_Session, ldap_user, ldap_passwd);
  
  DBMS_OUTPUT. Put_line (RPAD ('simple_bind_s Returns', 25,' ') |) ': '
  || To_char (retval));
  
  -publish research
  
  
  end;
  /

  I don't see where you set the variables ldap_user or ldap_passwd at all. I'm assuming that you didn't post your credentials, even if we are all friends here ;-) If you were not their definition, the binding will fail unless your LDAP allows anonymous binds.

  You must define ldap_user and ldap_passwd with the values that you use to connect to the LDAP server. I don't know AD, but for the OID the ldap_user would be a LDAP, for example "cn = orcladmin' full name, not just"sleep. "

  Good luck, Andy

• SSL VPN - ASA - Active Directory LDAP

  Hello

  Scenario: ASA 8.0 (3) running SSL VPN for remote users. LDAP also authenticates access and connect to the ASA.

  For some reason any (we had a power failure, but the problem may be caused by other reasons as well), I can not connect to the ASA, as my login ID does not work, and remote users get connection error when trying to authenticate via SSL VPN web gui.

  I have rebooted the ASA and AD without any change in the situation. This service worked very well before and the problem happened suddenly. No one has all the changes for the configs. Customer do not have a backup configuration. Any suggestion on what would be the best next action to solve this problem? I'm not expert on the Microsoft LDAP configuration, and if anyone knows where I can check in Microsoft windows server 2003 for the possible LDAP problem, that would be greatly appreciated.

  Thank you

  rdianat

  the ldap bind account is just a normal user account. He didn't need even administrative permissions. If you want to use ldap for password changes he needs to password change permissions, but otherwise just a normal user account - make sure it cannot be locked in AD or the password never expires none of this things. you will see the name of the ldap account in the config of the SAA.

  LDAP-login-password *.

  LDAP-connection-dn *.

• Can OBIEE on UNIX OS - we use LDAP using Microsoft Active Directory for UNIX OS?

  We are looking at options to run OBIEE 11 g on a UNIX server.

  Can we use authentication using Microsoft Active Directory LDAP for authentication OBIEE?

  Short answer: Yes.

  Longer answer: Yes you can. Operating system has no influence on that. All you need is the ability to connect to LDAP, and it's pure networking.

• Version of Cisco ACS 5.1.0.44.3 integrate with active directory server from Microsoft windows 2012?

  Version of Cisco ACS 5.1.0.44.3 integrate with active directory Microsoft windows 2012 R2 server?

  Unfortunately, it does not support R2 2012

  5.1 ACS supports all editions of:

  Windows Active Directory (AD) 2000

  Windows AD 2003

  Windows AD 2003 R2

  Windows AD 2008

  Source

  Windows AD 2012 R2 is supported after ACS 5.5 patch 1 and following.

  Source

  Please find below the steps to go from 5.1 to 5.5 hotfix 1:

  STEP	FILE	COMMAND
  Apply the 5.1 patch 6	5-1-0-44 - 6.tar.gpg	ACS patch install repository 5-1-0-44 - 6.tar.gpg ftp_repository_name
  Apply 5.3	ACS_5.3.0.40.tar.gz	application upgrade ACS_5.3.0.40.tar.gz ftp_repository_name
  Apply the patch 5.3 8	5-3-0-40 - 8.tar.gpg	ACS patch install repository 5-3-0-40 - 8.tar.gpg ftp_repository_name
  Apply the sharp Patch	Pointed-PreUpgrade-CSCum04132-5-3-0-40.tar.gpg	ACS patch installs Pointed-PreUpgrade -CSCum04132- 5-3-0 - 40.tar.gpg repository ftp_repository_name
  Apply 5.5	ACS_5.5.0.46.tar.gz	application upgrade ACS_5.5.0.46.tar.gz ftp_repository_name
  Apply the patch 5.5 1	5-5-0-46 - 1.tar.gpg	ACS patch install repository 5-5-0-46 - 1.tar.gpg ftp_repository_name

  Best regards ~ jousset

• Oracle DB not Windows and MS Active Directory

  Question:
  How can we configure a Microsoft Active Directory (LDAP compatible directory
  Service) with an Oracle database if the database is hosted on a unix Server
  without the need of the Oracle LDAP? Is this possible? If so, please explain.

  If you do not have OIDS that can be synchronized with the AD, but want to integrate with AD, then the way to go is OVD.
  You will find lots of information in this white paper. Majors scenarios are described.

  http://www.Oracle.com/technology/products/OID/PDF/dirsrv_eus_integration.PDF

  HTH
  Chris

• Download Dell C2665dnf of addresses in Active Directory

  Does anyone have this or a printer similar book download of email addresses on a Microsoft Active directory LDAP.

  The manual is light on the data from the example and I have been unable to cross due to lack of connection error.

  As seems to be the case with this config for web printers, there is probably the settings and other outside screens LDAP, that I did not set up correctly. Maybe

  • The port settings
  • Authentication system
  • Kerberos,
  • SSL/TLS,

  Or something that I completely forgot... I'm not a complete novice to Dell printers or LDAP integration. I have validated my settings with the help of a third-party LDAP and AD Explorer apps and everything should work... but of course this isn't :-)

  I tried both SSL/TLS 4 all the usual ports, authentication Kerberos and LDAP, etc. and all combinations of these options, but no progress beyond the error message from the printer in the user interface.

  Screenshots or listed to a working configuration settings would be greatly appreciated.

  Neil.

  Thanks to ThunderGod2 to confirm that this function works really, unfortunately the recommended change did not work for me... BUT... knowing it was possible... I continued to try different options, and this is the configuration that finally worked for me.

  The setup I have is a domain controller on 192.168.1.3 running Active Directory and Windows 2008 R2 (there are other domain controllers in the network, but it's one I usually authenticate on printers, and Web sites).

  Go to the web interface of the printer and configure as follows...

  1. menu: print server settings > print server settings > Port settings

  Set the "updating address book" box to check for on and apply.

  2. menu: print server settings > Security > authentication system

  The value 'Authentication system settings' LDAP and apply.

  3. menu: print server settings > Security > SSL/TLS

  Clear the checkbox "LDAP - Communication of SSL/TLS" and apply it.

  4. menu: print server settings > Security > LDAP server

  Define "IP address / name of host and Port" to the IP address of you DC/AD server (in my case 192.168.1.3)

  Set the port number of 389

  Set the "Search directory root" at the location where your users are. In my setup, the path was something like this: OR = users, OU = FOO, DC = FOO, DC = local

  It is a FOO.local domain that has an organizational unit FOO with a unit of sub - org called "Desktop users"

  You can get the address of your own ad using a free tool called ADExplorer from SysInternals (Microsoft Corporation)... Link: https://technet.microsoft.com/en-us/library/bb963907.aspx the ADExplorer app you can navigate through the directory active directory in a configuration type LDAP, and once you have located the correct OU just right-click on it and select "exemplary object name.

  Together: "login credentials to access LDAP server" system

  Together: "Login Name" to a user valid for authentication, you may need to add the field as a suffix, for instance [email protected] for the user joe in my example

  Together: "Password" and "re-enter Password" password of the user for authentication.

  Together: "Address book server" check on... then apply and restart the printer.

  Leave all other LDAP or LDAP mapping to the default settings and you should be good to go. My setup allows me to use the no-SSL/TLS connection on port 389, this can be checked with ADExplorer or other tools of the LDAP Explorer free on the web.

• vCAC 6.0.1 ASD Active Directory Endpoint

  I am creating and Active Directory endpoint in the 6.0.1 vCAC designer of advanced Service that uses SSL.  I am able to configure endpoint on port 389 or 3268 with success, but when I try to connect using 636 or 3269 it fails with an error wonderfully misspelled...

  Failed to create endpoint type AD vCO. Reason: Error: retriving server certificate. (Workflow: manage SSL certificates / certificates of the URL (item0) #6)

  
  

  It's not really doesn't tell me much.  I can say that it is having a problem for a reason, get the certificate of the server, but what prevents it from working?  I have a vCO connected to the same domain controller using SSL with no problems, although I import the certificate in vCO and restart the system before creating the connection AD it.  I had a colleague to look at the workflow vCO and noticed that the Manage "Workflow" certificates for the AD ASD Endpoint and he noticed an error undefined ADCertificateUtil().  This is a VMware built class which should be part of the AD Plugin in vCO.

  
  

  This led me to try and load a previous version of the AD Plugin in vCO, but I quickly discovered that no other version of the plugin AD that comes with the 5.5.1 unit will operate.  So I demoted vCO to 5.1.2 to give a try.  I loaded the version 1.0.3 plugin that has the class in the structure of the plugin files, but then discovered that no end point appear in the drop-down list in the DSA in vCAC 6.0.1.  GREAT!  So, I try to use vCO device version 5.5.0 which I remembered did not ship with a version of the plugin and then tried to download the AD Plugin once again, that worked.  Once I connect vCAC to this instance of vCO, I at least see Active Directory as an option.  I start working on it and I get the same wonderful error as described above.  Still digging into the workflow also shows the same of undefined ADCertificateUtil().

  
  

  I'm about to options for what I know to try and wish assistance.  The main reason for working through this problem is so I'm able to move from a field of AD password for password resets and the new creation of the user of a Service of Onboarding in vCAC.  Can someone help me with this?  I think I tried everything my mind can come with and now chosen to harass the communities for answers.  Thanks in advance.
  

  vCAC provides it's own series of workflow for configuring plugins different vCO. The workflow is a modified version of the original workflows plugin configuration. In this case, it seems that the workflow that ASD matters in the vCO and is trying to use for the configuration of the AD is an older version, the vCO is a more recent version of the plugin AD, where it seems that ADCertificateUtil has been removed in favor of the workflow of the library "import a certificate from URL". This is why it fails vCAC and it will also fail of the vCO.

  If it's OK for you, I would say to set up the Active Directory end point through vCO. If this isn't the case, then you can try to redirect the workflow that is used for the configuration of the parameters of AD. The configuration is a file that is located in ' / etc/vcac/vco-endpoints-workflows.xml '. You must change the endpoint "ad" to point to a workflow can configure an Active Directory server. You can try to configure create and update the workflow to point to the workflow rescue (the default configuration workflow that comes with the plugin AD) or create your own workflow and point to him. This however requires a restart of the 'advanced-designer-service' to pick up the new settings.

• Integration of EBS 11i with Microsoft Active Directory

  Hi all
  
  Please suggest how can I integrate EBS 11i with Microsoft Active Directory (LDAP), since we have regiterd SSO.
  
  Thank you.

  Please see these documents.

  Integration of Oracle E-Business Suite Release 11i with Oracle Internet Directory and Oracle Single Sign-On [261914.1 ID]
  Installation of Oracle Application Server 10 g with Oracle E-Business Suite Release 11i [ID 233436.1]
  Oracle Application Server with Oracle E-Business Suite Release 11i FAQ [ID 186981.1]
  Oracle Application Server 10g with Oracle E-Business Suite Release 11i troubleshooting [ID 295606.1]

  Thank you
  Hussein

• MRI / sealing server / authentication / Active Directory

  Hello
  
  I want to use 11g "Sealing Server" to unsealing documents.
  
  Documentation:
  "The current version supports basic HTTP authentication.
  http://download.Oracle.com/docs/CD/E17904_01/user.1111/e12326/isvsealedcontent002.htm#sthref46
  
  Is it posible to use authentication Windows Active Directory with "sealing Server?
  
  
  Thank you.

  Hello

  The authentication scheme supported only for sealing services is basic authentication.

  Kind regards
  Frank.