MS Vista Gadget - Feed Headlines date not displaying does not correctly

Similar Questions

• Vista Data Execution Prevention does not let me play tractor simulator 2013

  Vista Data Execution Prevention does not let me play tractor simulator 2013

  Moved from feedback

  Hi, Tractor1o1,

  If you choose to protect all programs, you can always turn off DEP for individual programs. If you think that a program does not run correctly when DEP is enabled, check for a compatible version of the DEP program or an update from the software publisher before you change your DEP settings.

  http://Windows.Microsoft.com/en-us/Windows-Vista/change-data-execution-prevention-settings

  Please do not duplicate messages.  It is a violation of the Code of conduct.  See the article "Please Don't ':

  "Post questions that are identical or similar to the questions you have already posted. When someone has an answer to your question, that person will respond. »

  http://answers.Microsoft.com/en-us/page/FAQ#faqCodeConduct

  Thank you.

• By connecting to Vista, get error mdata.dat file not found

  When you connect to windows vista I get the file error 'MONTANA. DAT"not wetting. I can not tell whence error or how to fix it.

  Hi Jameswithey,

  1 did you recent hardware or changes to the software of the system?

  This error message usually refers to the mouse. If you have recently installed a new mouse on your computer, you may need to remove the software that came with your mouse and see if the problem persists.

  Step 1:

  Uninstall the mouse in programs and features

  a. click on start

  b. type appwiz.cpl in the start search

  c. search for all mouse software packages, right click and uninstall.

  Once it is removed, reconnect your mouse, restart your computer, and update the drivers.

  You can also consult the website of the manufacturer of mouse and try to update the latest version of the drivers.

  Updated a hardware driver that is not working properly

  Step 2:

  If the step above does not work, you can try to perform a clean boot and check.

  A clean boot to check if startup item or services to third-party application is causing this issue.

  You can read the following article to put the computer in a clean boot:

  How to troubleshoot a problem by performing a clean boot in Windows Vista or in Windows 7

  After the troubleshooting steps, please refer to clean the boot link to put the computer to normal startup mode.

  Hope this information is useful.

• How to display correct sRGB images in applications unmanaged Vista with a wide range of display?

  Hi all

  This isn't a simple question, and I don't expect the answers to be simple either.

  1. I have vista home premium
  2. I have a wide range of LCD, a screen with a significantly wider than the sRGB color profile (sometimes incorrectly called a display Adobe RGB)
  3. I have it calibrated with a Spyder3Elite
  4. Images look GREAT in color managed applications (including the windows photo gallery)
  5. Photos have air saturated outside color management applications, even if they are sRGB images.

  Here's what I need.  If an application is not color management then Vista should apply the sRGB profile AND map it on my monitor profile.

  What is happening now is the image is mapped directly to the color space of the monitor and let the oversaturated colors. The end result is that all images within windows and Internet Explorer are saturated. The only solution for navigation is to use a plugin to make the management of the colours of firefox or use safari.

  BTW. Even if windows photo gallery is the color of the slide show management is not argghhh.

  I have looked at the Advanced tab on the Vista color management, but did not find ANY documentation on the 'device profile' or 'View profile status' settings. They seem to be associated with what I need, but there is nothing in the help about it. What do mean? second question, sorry)

  Concerning
  JzE

  PS. I checked the color management using the 4 images at http://www.color.org/version4html.xalter. I have saved their drive and use them as a reference to quickly check if an application is successful or not color.

  I received this reply from Michael Bourgoin. Thank you, Michael, we now have at least one answer...

  Hi J___,.

  I wish I could give you some good news, but the fact is that most of the components of windows and the Windows desktop are always not color management. The Windows Photo Gallery and Windows Live Photo Gallery are the only elements of the Windows color reach the display profile. Most office applications will honor profiles embedded in images, source but then they convert to sRGB and throw it on the screen. And IE is not even honor profiles embedded in images...

  That you have determined, the settings in the color management control panel affect only the applications of color management. The settings in the tab Cpl Advanced CM are used to provide default values for the missing profiles needed for the creation of color transformation for WCS in color management applications. Again not to help.

  Regarding the application non-management of color management color "behind their backs" goes, it's very difficult to do in general. There is no easy way for the OS to tell if the color data that renders an application has already been color managed, or not.

  We have a technology called high color which will be in Windows 7 that aims to solve this problem. Color high-definition given color are first converted into a color space extended which uses the sRGB primaries, but which allows the values less than 0.0 and 1.0 above (let's call it sRGB-XR). Colourful is closely related to xvYCC and X.v.color of Sony. Range wide color data can be converted in this space with no loss. Displays (and maps) that support colourful are necessary to convert this space sRGB-XR internally to their native color space. With color high definition, the United Nations - RGB color management is treated as sRGB, which is unchanged when converted to sRGB-XR space (it's all in the [0.1] part of the encoding). But then peripheral compatible High Color will map correctly that in their native space, so the sRGB data never get oversaturated in being treated as if she was already in wide range native of screen space (as happens now). And any image content real wide range gets correctly mapped to take advantage of the wide range of the screen. The plumbing for High Color is under Windows 7. However, the Desktop Window Manager could not implement a high color support in time (this requires the use of a fixed or floating point rendering surface), if the Bureau will not use color high definition, however, in Win7. Maybe the next time.

  I would like to be able to give more excuses, explanations and communities.

  Best regards

  Michael Bourgoin
  Program Manager | Experience Windows & Imaging Team color
  Microsoft Corporation

• Lack of drive DVD Vista - Oh, no it's not!

  I failed to find a similar question already answered that fits my particular set of circumstances.

  I just lost my CD/DVD on my Sony Vaio laptop equipped player of Vista 32 bit SP2.

  It does not appear in Windows Explorer, but it appears in the device as Manager works correctly.  He also appears in the management of the computer as drive G, which is what it was before, and even the name of the volume of the CD that is loaded is displayed correctly.

  It plays BluRay and movies on standard DVD and music CD discs in Media Player.  However, it does not seem to read data disks, (although the volume name is indicated in CM as I said) and is not available in Explorer.

  I removed upper and lower filters in the registry, removed the drive and cleaned the contacts and uninstalled and reinstalled the drivers.

  I have a feeling that if it were possible to establish why its drive letter does not appear in the Solution Explorer, then all problems would be solved.

  Any ideas please?

  PS. I also realized that my two disks of built-in removable storage, E and F are missing in Explorer Windows even if they are reported as working properly in Device Manager and have their correct drive letters in computer management.  When I insert a memory card in one of them, the management of the computer recognizes his presence.  My readers HD (C and D) work fine in Explorer.  Oh, and autoplay (or autorun) no longer works when I insert a CD or a memory card.

  (When I talk about the drive letter, I mean that the disk is missing, not only the letter).

  I HAVE IT SOLVED!  (And it was simple - it's not always the way?)

  I have Tweak VI installed, and for some reason any he had deselected the three discs that I had lost.  I don't know how it happened but when I ran earlier, I found that in the utility 'Hide the Explorer disk drives', only hard drives have been checked and all other checkboxes disc were empty.  I checked those I've been away, restarted the computer and they were there.  Same AutoPlay works fine now.

  I hope it's useful to someone else with the same problem.

• VISTA DRIVER DOWNLOADS, BUT WILL NOT ACTUALLY INSTALL...

  A few weeks ago, I was on my computer and it will randomly stop. When I tried to turn it back on, it just kept power off.  Finally, he gave the option to start Windows normally or start Windows repair. I tried to boot normally, it did not work. My computer felt hot so I let it alone for a while. It restarted a few hours later, but this time launched Windows Repair. It has not always worked, so he allowed me to restore to a date, he has already worked correctly.

  Now, it will not install THE drivers or update ALL drivers.  (I have four obsolete drivers).  He will say it's install software device driver, I chose the choice to locate and install the driver. It looks in Windows update. But then he leaves these messages every time: Windows encountered a problem installing the software driver for your device. GOLD Windows found driver software for your device, but has encountered an error trying to install it. Sometimes it is said: the process cannot access the file because another process is used.

  HP has been little or no assistance, given that my laptop is now out of warranty.  They told me to run the Windows File Checker utility, and the results, said: Windows Resource Protection found corrupt files but was unable to solve some of them.  I was also told to perform an audit of the memory and hard drive, but everytime I try, my computer just turns off!  I try to run the Diagnostics but I saw several devices that have been disabled, and I don't know how they got that way.  The final result with HP is always restore your computer to its factory settings, but I don't understand why I should do before I know if it's a hardware or software problem.  If I restore to factory settings, I lose all my programs installed? How do I get those back?  How can I find the facilities? And if I restore, Windows Vista still work properly?  I don't know what to do and I am at my wits end, can anyone help?

  I have a HP Compaq Presario CQ60 - 215DX Notebook PC

  AMD Athlon Dual-Core QL-62 2.00 GHz 32-bit.

  Windows Vista Edition Home Premium. Service Pack 2

  Hello

  Who "felt really hot" worries me. If you have a store of the local computer (the one that is internal
  repairs and not a leek and display a Best Buy or other stores) or HP Support I
  have so look to it. Frankly you should first return it to factory specs and see if
  It works correctly and if not ask such technical assistance indicated previously

  We might be able to help solve the problems, but that would be unnecessary if the heat has
  damage to the computer, which makes it look like is the case. Added that this process of repair is not likely
  work and would take longer to restore the system back and reinstall your programs.

  You need to get your programs from the same source, that you did initially. Make sure that you have
  the product keys needed to install everything. Have your sources and your keys aligned in front of you
  begin the review.

  Compaq - support, drivers and documentation online
  http://www.Compaq.com/country/cpq_support.html

  Compaq (HP) - Forums
  http://h30434.www3.HP.com/PSG/=.

  You can save your files by putting the drive in another computer as a 2nd disk (best) or external
  Drive USB enclosure and then backup to removable media such as CD, DVD or other USB drives.
  Of course a real store of the computer or the manufacturer of your system can help to recover the files.

  Or you can use a boot Ubuntu CD to back up data.

  Use Ubuntu Live CD to backup files from your Windows computer dead
  http://www.howtogeek.com/HOWTO/Windows-Vista/use-Ubuntu-Live-CD-to-backup-files-from-your-dead-Windows-computer

  I hope this helps.

  Rob Brown - Microsoft MVP<- profile="" -="" windows="" expert="" -="" consumer="" :="" bicycle="" -="" mark="" twain="" said="" it="">

• "The network adapter is not correctly configured to use the ip Protocol" problem on Vista

  Hello. My PC has recently came across this problem "the network adapter is not correctly configured to use the ip Protocol", every time I click on diagnose & repair. I don't know how to fix it. Please help, thanks in advance. Magic

  Hello X-x_MaGiC_x-X,

  Thank you for visiting the website of Microsoft Windows Vista Community.

  Try the rest of the stage in this article:

  System restore points are created automatically when the following occur:

  • When you install a new application or driver.
  • When you uninstall or install some programs.
  • When you install new updates
  • Automatically on a daily interval
  • Manually by creating a.
  • If you choose to use system restore to restore to a previous restore point, System Restore creates a new restore point before you restore a previous state in case something goes wrong. If you are restoring to a previous state in Mode without failure, a restore point will create for the current state.

  So that the restoration of the system to work, you must have 300 MB of free space for each hard disk that monitors the system restore. System Restore will also use up to 15% of disk space on each disk that it monitors. That hard disk space runs out, older restore points will be deleted as newer ones. It is also important to note that you must be logged in as an administrator in order to use the system restore. Now that you understand the basics of the system restore, you must continue to the next section to learn how to use it.

  Restore Windows Vista to a previous state

  In the case of a problem on your computer that cannot be solved by normal means, you can restore your computer to a previous working state. To do this, you need to start restoring the system so that you can choose the restore point to restore. If you currently have Windows Vista boot problems, you can use the system restore in Windows recovery environment. Instructions on how to do it in this tutorial can be found: System Restore using the Windows Vista recovery environment.

  If you can connect to Windows Vista, you must follow these steps.

  1. Close and save any documents that you have opened.
  2. Click the Start button to open your Start Menu. The Start button looks like this:
  3. When the Start Menu open click on the menu option all programs.
  4. Click once on the Start Menu Accessories group.
  5. Click once on the System Tools Start Menu group.
  6. Click once on the icon of the system restore. After you click the icon, if a user account control window opens, click on the button continue.

  You will now be on the screen as shown below in Figure 1 system restore. From this screen, you can specify the restore point that you want to restore.

  1 screen of system restore

  By default, Vista will be already selected the restore recommended option. This restore point is one followed a new pilot program, or update has been installed. If you do not want to use this restore point, you can click on the button next to start the restore process. On the other hand, if there is a more recent restore point that you want to restore you should select choose a different restore point and press the next button. This will bring you to a screen, as shown in Figure 2, which contains a list of all available restore points that you can restore.

  2. the list of available restore points

  You must select the restore point that you want to restore, and then press the button next to start the restore process. Vista will display a window showing your selected restore point and asking you to confirm that it is that you want to restore.

  3. confirm the selected restore point

  If you want to select a different restore point, press the Back button. Otherwise, you can press the Cancel button to exit the system restore or the button finish to begin the restore process. If you have selected finish, Vista will display a second prompt asking you to confirm that you want to continue restoring.

  4. second Confirmation

  If you are sure you want to restore, then press the Yes button. Vista will now log you off the computer and start the system restore process, as shown in Figure 5 below.

  5. restoration of a restore point

  When the restore is complete, your computer will be restarted and when Vista starts it backup will be restored to its previous state. When you open a Vista session for the first time after the restore, you will see a message indicating that the restore was successful.

  6. system restore was successful

  If there are problems with your computer because the last restoration, you can return to your previous settings to ebb in the system restore utility and select Undo system restore by pressing the next button.

  7 undo the last system restore

  Your computer should now work correctly again.

  With the help of the restoration of the system in the Windows recovery environment

  Manual creation of Restore Points

  As mentioned previously, it is also possible to create manual restore depending on points. Some popular designs to create manual restore points are when you have your computer configured perfectly and I would save the State in case of problems in the future. To create a manual restore point, you must follow these steps:

  1. Click the Start button to open your Start Menu. The Start button looks like this:
  2. Click on the control panel menu option.
  3. Click the option menu system and Maintenance.
  4. Click on the system menu option.
  5. Click on the System Protection in the list on the left.

  You will now be at the System Protection tab in the system control panel. This tab allows you to enable and disable the system restore as well as making the new manual restore points.

  8. the System Protection tab

  To create a manual restore point, you must click on the button create. When you press this button a prompt asking you to give a title to this manual restore point.

  9. Enter the manual restore point title

  Type a title for the manual restore point and press the button create. Vista will now create a restore point manually and once finished, post a notice that it was created successfully.

  10. Manual restore point has been created

  Now that you have finished doing the manual restore point, you can close the system window.

  Try to download the correct and up-to-date drivers.

  This should solve your problem.

  Let us know if these steps solve your problem.  I hope the information is useful.

  Kind regards

  Anthony
  Microsoft Answers Support Engineer
  Visit our Microsoft answers feedback Forum and let us know what you think.

• Firefox will not correctly display some web pages and addons can not be installed.

  I just installed firefox to the computer after the installation of the Windows 7 operating system.
  It does allow me to install an addon in the browser. In addition, it does not display the page addons firefox and github.com. (only plain html is displayed without CSS any kind of things)
  I tried to remove cookies, remove stuff history and running in safe mode. None of the methods worked.
  The web pages above perfectly displayed in other browsers on the same computer.

  Hello deamonpog, please make sure that your system date, time and timezone are correctly set!

• Where are the Windows Vista Gadgets

  Hello:

  Microsoft used to have a link with a lot of downloadable gadgets for Windows Vista.

  I'm not finding it more.

  Is there a link (internal or external to Microsoft) who has "trust worthy" gadgets for download?

  Thank you

  DaleB

  Hi Dale,

  Thanks for posting the question in the Microsoft Community!

   

  You want a link to download gadgets for Vista.

   

  We want to focus on the exciting possibilities of the newest version of Windows, the Windows hosts site is more gadget gallery.

  I would say as you to see the site:

  Google Desktop Gadgets

  http://Windows.Microsoft.com/en-us/Windows/downloads/personalize/gadgets           

   

  If you need any other assistance, let us know and we would be happy to help you.

   

• Message: "the Security Center service cannot be started. I am running Vista, fully up to date with AntiVirus & Anti Malware, & others. Unable to change the center of security of people with DISABILITIES.

  Message: "the Security Center service cannot be started. I am running Vista, completely up-to-date with Avira AntiVirus, Malwarebytes - Anti-Malware, MS/scans of Windows Security Center (for example MS Fix It programs Center), etc. No Malware has been found. Despite me trying to re - set the Security Center using start > Services > SecurityCenter > change to "Automatic (delayed start)" people with disabilities > start > output the re-creation is not the owner and I'm back with no security - with the same message as the original. I spent hours trying to deal with this. There is no known new applications/programs, and the problem started about 3 days ago. Help requested - thanks. JohnG - Sydney

  Hello

  ·         Are you can change the Security Center service parameter by using a different user account on the computer?

  I suggest you to make sure that Windows Defender is running. Follow the below mentioned articles and check.

  Follow the suggestions below for a possible solution:

  Method 1: I suggest you perform the clean boot and check.

  How to troubleshoot a problem by performing a clean boot in Windows Vista or in Windows 7

  http://support.Microsoft.com/kb/929135

   

  Note: After troubleshooting, be sure to configure the computer to start as usual as mentioned in step 7 in the above article.

  Method 2: If the method above is not enough, then I suggest refer you the link try the steps and check if that helps:

  How to perform an upgrade on the spot on Windows Vista, Windows 7, Windows Server 2008 & Windows Server 2008 R2

  http://support.Microsoft.com/kb/2255099

   

  Note:

  You can back up data to an external hard drive and no CD. It is essential to back up data even if you do an upgrade on the spot.

  If you are using the original computer and the new laptop image, you will need to purchase a product key to activate the copy of windows installed on the laptop.

  Hope the information is useful.

• When I try to burn a music disc player is registered as a DATA reader and does not allow me to copy music files that I can play on an external source

  I have computer aGateway running Vista Home Edition and something happened with WIndows Media Player.   I have the DVD/RW internal drive and external DVD/RW as a player.  I use them mainly to copy music files and it has always worked fine until yesterday.

  When I try to burn a music disc, the player is registered as a DATA reader and does not allow me to copy music files that I can play on an external source (such as the CD or car drive).  Worked fine Saturday and had burned discs Saturday night recognizes the two drives as data drives.

  Is it something that needs to be reset or changed?

  In WMP, please click the button burn up and make sure that the Audio CD is selected. Then try burning the CD again, they now play on a standalone CD player too.

• Weather in Vista gadget

  My weather in Vista gadget no longer works in Los Angeles.  Funny is that it works in Celsius, not Fahrenheit.  I am constantly 66 F (never changes).  Other cities are working fine.

  Anyone who could help would be appreciated!

  Hello

  No help, but here is the best weather gadget I've seen and another program of free time
  I like even better.

  Gadget proWeather - best one I've seen by far
  http://Gallery.live.com/liveItemDetail.aspx?Li=b14d68bb-71ee-40CD-8CF5-c95b63503d00&BT=1&PL=1

  ProWeather on the list 10 here - see figure D
  http://blogs.TechRepublic.com.com/10things/?p=446

  and:

  WeatherPulse - free (this can add a Desklet on your desktop even better than a gadget and more info)
  A Tip - If you install it when he asked city or ZIP in town and not the zipper.
  http://tropicdesigns.NET/weather_pulse.html

  You can use both.

  I hope this helps.
  Rob - bicycle - Mark Twain said it is good.

• My display does not illuminate.

  My screen will not turn on, all I get is a black screen.

  Hello

  You can access Mode safe? Repeatedly press F8 as you start? If yes you can try Control Panel - device
  Manager - graphics card - Double click on - driver tab - click on UPDATE driver - then right click
  on devices and UNINSTALL - REBOOT.

  Another method to try to get to the desktop (try in normal Windows Mode without failure)
  CTRL + ALT + DELETE and on the tab process EXPLORER.exe and COMPLETE the PROCESS on this subject - then
  on the Applications tab - lower right - new task - type in EXPLORER.exe. Safe mode is reached
  by tapping F8 as you start several times.

  First check this thread in case it is simple and if not to come back to this thread.

  http://social.answers.Microsoft.com/forums/en-us/vistaprograms/thread/50247d5e-0ae0-446c-A1bd-11287fd1478a

  Black screen problems are extremely difficult to repair and all patch is usually on a base hit or miss.
  That there is no information on a black screen as it is on a blue screen just adds to the
  Difficulty. Often using a restore point or Startup Repair will have no effect. You can try a
  Google to see the proposed repairs, whom some have worked however these cover a wide
  field efforts.

  Here's a video of one of them.

  http://www.Google.com/search?hl=en&q=black+screen+of+death+Vista&btnG=search&AQ=f&OQ=&AQI=G1

  Here's another fix
  http://blogs.PCMag.com/SecurityWatch/2008/12/the_mysterious_black_screen_of.php

  You have a Vista disk? You can try restoring the system to it. If you do not have your system disks
  manufacturer will sell them at low prices. Or try in safe mode if you can get there.

  How to make a Vista system restore
  http://www.Vistax64.com/tutorials/76905-System-Restore-how.html

  You can create a recovery disc or use someone even version (to do the system restore there only to)
  being bootable).

  How to create a Vista recovery disk
  http://www.Vistax64.com/tutorials/141820-create-recovery-disc.html

  ------------------------------------------------

  These require the correct Vista discs since you can not start safe mode.

  Try the Startup Repair tool-

  This tells you how to access the System Recovery Options and/or with a Vista disk
  http://windowshelp.Microsoft.com/Windows/en-us/help/326b756b-1601-435e-99D0-1585439470351033.mspx

  Try recovery options Startup Repair

  How to do a startup repair
  http://www.Vistax64.com/tutorials/91467-startup-repair.html

  -----------------------------------------------

  Here are a few Google searches where many have found different solutions:

  Vista black screen - check that a 1st
  http://www.Google.com/search?hl=en&source=HP&q=Vista+black+screen&AQ=f&OQ=&AQI=G10

  Vista black screen Solution
  http://www.Google.com/search?hl=en&q=Vista+black+screen+solution&AQ=f&OQ=&AQI

  Vista black screen Fix
  http://www.Google.com/search?hl=en&q=Vista+black+screen+fix&AQ=f&OQ=&AQI

  -----------------------------------------------

  If necessary and you can access all ordinary Windows.

  You can try an In-Place Upgrade (hopefully save programs and data) or a repair installation (if all goes well
  saves the data, and you need to reinstall the programs). Be sure to do a good backup or three.

  You can use another DVD that are not protected but you will need to copy you have the product key.

  On-site upgrade
  http://vistasupport.MVPs.org/repair_a_vista_installation_using_the_upgrade_option_of_the_vista_dvd.htm

  If nothing works, you can make a repair facility that must save the data but you will need to
  Reinstall the programs. This also requires correct Vista disks especially for OEM versions. You will be
  need to know your product Code.

  This tells you how to access the System Recovery Options and/or a Vista DVD
  http://windowshelp.Microsoft.com/Windows/en-us/help/326b756b-1601-435e-99D0-1585439470351033.mspx

  How to perform a repair for Vista Installation
  http://www.Vistax64.com/tutorials/88236-repair-install-Vista.html

  ---------------------------------------------------------------------------

  Another method that works sometimes: at the command prompt, type of Vista startup disk:
  (type in a single line or copy / paste a line at a time and then press enter - type no parenthesis)
  or "BOLD")

  c:

  cd\

  CD c:\Windows\System32\winevt (there is a space between cd and C :)
  
  Ren LogsOLD Logs (there are spaces between ren and newspapers and Logsold)

  RESTART Windows

  I hope this helps.
  Rob - bicycle - Mark Twain said it is good.

• Some planning reviews don't show all the data. "no data to display.

  Hello

  As I changed the policy for oversized VM, planning does not seem to work.

  For example, I have 6 power VM off, but in the planning - views - Machine virtual Powered-Off, I have nothing other than a small text at the bottom: "no data to display.

  

  As you can see on the left of the screenshot, I have a few VM power - off, and I guess that Vcops know because it display the logo "off voltage VM', but still, to planning - finds out, he does not list these VM.

  I don't know if it's because I change politics for oversized VM, but I put back it by default, and the problem is still there.

  Thanks in advance for your help.

  (And sorry if my English is approximate)

  Sorry, I did not explain my problem very clearly:

  The engine out of sight the listed me, some VM before I get a parameter to the default value of policy, but then: no VM more not listed in the display. Even after you return, I changed this setting to normal, the virtual machine has not p showed in the sight of power off.

  But still, the problem is "solved", it works now, I just had to wait. I think that Vcops recalculat every thing when you change something in politics, and it took more time than I have.

  In any case, thanks mark.j

• CustomObjectTreeModel displays does not correctly

  Hello
  
  
  I created a Database Explorer tree model. It seems my attempts to try to make it as simple as possible got the best of me.
  
  I created a generic object that has a property name with a get accessor and a Set accessor, I also override the ToString method to return the name as well as a summary get icon method for tree cellrenderer.
  
  I created other objects, the table, schema and the field objects that inherit from this object.
  
  I decided against store a list within each of these object, to remedy this, I did the generic object inherit from ArrayList.
  

  public abstract class GenericObject extends ArrayList<GenericObject> {
      
      private String name;
      
      /**
       * 
       * @param name 
       */
      public GenericObject(String name) {
          this.name = name;
      }
      /**
       * 
       * @return 
       */
      public String getName() {
          return this.name;
      }
      /**
       * 
       * @param name 
       */
      public void setName(String name) {
          this.name = name;
      }
      /**
       * 
       * @return 
       */
      @Override public String toString() {
          return this.name;
      }
      
      public abstract ImageIcon getIcon();
      
      }

  Basically, the JTree does not display objects properly (Yes, the root of the jtree object inherits from GenericObject too).
  
  I wonder if my generic typing is not correct, or if the JTree can not handle this type of object (which doesn't seem likely).
  
  I don't know if I'm supposed to do that "public class GenericObject < E extends GenericObject > extends ArrayList ' or if it should be as in the example above?
  
  Also, when I created the 'picture' of the class - "Table/public class extends GenericObject < field >"-should I do this?
  
  This simplifies the TreeModel as everything I do is the following:

      /**
       * Returns the child of the parent
       * @param parent
       * @param index
       * @return Object
       */
      @Override public Object getChild(Object parent, int index) {
          return ((GenericObject) parent).get(index);
      }

  How I did it, means all objects must be fully recursive.
  
  Technically, it should be a hierarchy, something like this:
  
  Root > databases > patterns > Tables > fields
  
  Because each object stores a child of the GenericObject.
  
  Kind regards
  Michael

  That_Gui wrote:
  Basically, the JTree does not display objects properly (Yes, the root of the jtree object inherits from GenericObject too).

  The problem is probably somewhere in your TreeModel (or even simpler your not to load the data that you are). Hard to say where the since you did not have this zip code.

  I wonder if my generic typing is not correct, or if the JTree can not handle this type of object (which doesn't seem likely).

  I don't know if I'm supposed to do this ' GenericObject class /public extends ArrayList ' or if it should be as in the example above?

  Also, when I created the 'picture' of the class - "Table/public class extends GenericObject "-should I do this?

  Looks like you are looking for

  public class GenericObject extends ArrayList {}
  public class Table extends GenericObject {}