My display does not illuminate.

My screen will not turn on, all I get is a black screen.

Hello

You can access Mode safe? Repeatedly press F8 as you start? If yes you can try Control Panel - device
Manager - graphics card - Double click on - driver tab - click on UPDATE driver - then right click
on devices and UNINSTALL - REBOOT.

Another method to try to get to the desktop (try in normal Windows Mode without failure)
CTRL + ALT + DELETE and on the tab process EXPLORER.exe and COMPLETE the PROCESS on this subject - then
on the Applications tab - lower right - new task - type in EXPLORER.exe. Safe mode is reached
by tapping F8 as you start several times.

First check this thread in case it is simple and if not to come back to this thread.

http://social.answers.Microsoft.com/forums/en-us/vistaprograms/thread/50247d5e-0ae0-446c-A1bd-11287fd1478a

Black screen problems are extremely difficult to repair and all patch is usually on a base hit or miss.
That there is no information on a black screen as it is on a blue screen just adds to the
Difficulty. Often using a restore point or Startup Repair will have no effect. You can try a
Google to see the proposed repairs, whom some have worked however these cover a wide
field efforts.

Here's a video of one of them.

http://www.Google.com/search?hl=en&q=black+screen+of+death+Vista&btnG=search&AQ=f&OQ=&AQI=G1

Here's another fix
http://blogs.PCMag.com/SecurityWatch/2008/12/the_mysterious_black_screen_of.php

You have a Vista disk? You can try restoring the system to it. If you do not have your system disks
manufacturer will sell them at low prices. Or try in safe mode if you can get there.

How to make a Vista system restore
http://www.Vistax64.com/tutorials/76905-System-Restore-how.html

You can create a recovery disc or use someone even version (to do the system restore there only to)
being bootable).

How to create a Vista recovery disk
http://www.Vistax64.com/tutorials/141820-create-recovery-disc.html

------------------------------------------------

These require the correct Vista discs since you can not start safe mode.

Try the Startup Repair tool-

This tells you how to access the System Recovery Options and/or with a Vista disk
http://windowshelp.Microsoft.com/Windows/en-us/help/326b756b-1601-435e-99D0-1585439470351033.mspx

Try recovery options Startup Repair

How to do a startup repair
http://www.Vistax64.com/tutorials/91467-startup-repair.html

-----------------------------------------------

Here are a few Google searches where many have found different solutions:

Vista black screen - check that a 1st
http://www.Google.com/search?hl=en&source=HP&q=Vista+black+screen&AQ=f&OQ=&AQI=G10

Vista black screen Solution
http://www.Google.com/search?hl=en&q=Vista+black+screen+solution&AQ=f&OQ=&AQI

Vista black screen Fix
http://www.Google.com/search?hl=en&q=Vista+black+screen+fix&AQ=f&OQ=&AQI

-----------------------------------------------

If necessary and you can access all ordinary Windows.

You can try an In-Place Upgrade (hopefully save programs and data) or a repair installation (if all goes well
saves the data, and you need to reinstall the programs). Be sure to do a good backup or three.

You can use another DVD that are not protected but you will need to copy you have the product key.

On-site upgrade
http://vistasupport.MVPs.org/repair_a_vista_installation_using_the_upgrade_option_of_the_vista_dvd.htm

If nothing works, you can make a repair facility that must save the data but you will need to
Reinstall the programs. This also requires correct Vista disks especially for OEM versions. You will be
need to know your product Code.

This tells you how to access the System Recovery Options and/or a Vista DVD
http://windowshelp.Microsoft.com/Windows/en-us/help/326b756b-1601-435e-99D0-1585439470351033.mspx

How to perform a repair for Vista Installation
http://www.Vistax64.com/tutorials/88236-repair-install-Vista.html

---------------------------------------------------------------------------

Another method that works sometimes: at the command prompt, type of Vista startup disk:
(type in a single line or copy / paste a line at a time and then press enter - type no parenthesis)
or "BOLD")

c:

cd\

CD c:\Windows\System32\winevt (there is a space between cd and C :)

Ren LogsOLD Logs (there are spaces between ren and newspapers and Logsold)

RESTART Windows

I hope this helps.
Rob - bicycle - Mark Twain said it is good.

Tags: Windows

Similar Questions

  • The Satellite A200 display does not illuminate after being idle for 15 minutes!

    Hello!

    I just bought a Satellite A200 1 - AX PSA6 and install Windows XP SP2 + upgrade of bios for winxp.
    After 15 minutes of unactivirty (no not pressing the keys or moving the mouse), I set in power options in Control Panel - what must power OFF display.
    After this time display is switched off (black)!

    But I can't wake up my laptop!
    I'm press any key or move the mouse, but the screen is always black!
    But laptop works!
    I can ping and then by network or remote access connection.

    One way to solve this problem:
    Laptop open and close!
    A200 - "standby mode" and wake up with swithches on screen...

    Hello

    It seems that Windows XP Home edition does not work perfectly on the new laptops designed Vista. Before you live your laptop try to change profile settings (extended battery) power and test the parameters of this profile.
    Tomorrow I'll try to install Windows XP Home on my A200 and I'm really interesting if I even notice.

  • Satellite M100-164 display does not illuminate after hibernation

    After the computer wakes up from hibernation by lifting the display panel (cover) and the LCD screen turns off due to power management settings, display shows the Toshiba logo and does not return after a key is pressed and the keyboard is not responding.

    I turned - power & removed the battery without success-.
    OPS: windows XP.
    Help, please.

    Hello

    You have removed the battery but wait you a bit?

    If please plug the laptop and remove the battery.
    Wait 15-20 min and then plug the AC adapter and put the battery in the laptop.

    Then try again!

  • I have the lS PowerShot SX30 after recharging the battery, the display does not illuminate?

    Hello, I hope someone can help me! I have not used my camera in several months so I recharged the battery and for some reason that the screen does not light. I'll be honest, I'm a little bit challenged with this device. Can someone help me please? Thank you, Vickie

    I have two batteries, so I just put in the other battery and it works now! I also put the other battery I thought I had reloaded on charger. Thank you for your response. Have a blessed day.

  • display does not illuminate

    can anyone help. I have a Pavilion dv7 (1 month) every now and then when the laptop was closed, I open him and slide my fingerprint. The laptop turns on and you can see the home page but with no backlight. Nothing it will bring, the only way is to hold the power button until it turns off, then restart. He always lights up as usual. What is a fault or a setting that I can change.

    See you soon

    Hello

    I suggest that you update the BIOS to the latest version. Normally issues such as you describe are set in the BIOS updates.

    I don't know if it is a widespread problem.

    As test, consider removing the password on wake up to see if it works always without verification of fingerprints required.

    Best regards
    ERICO

  • try to install GEFORCE GTX650 in my HP Pavilion p6 - 2413 has but the display will not illuminate.

    Try to install the GEFORCE GTX650 in my HP Pavilion p6 - 2413a, I plugged everything in and the fan seems to work but the display does not illuminate.

    There is another cable with 2 multi 1 6 end plug but I can't work out where to connect.

    I tried to find it on youtube but can't see where he's going to help me please.

    Hello

    You need a greater power to support a PCI-E power connector 6 pin. Try a Corsair CX500, or CX600. The image below is that of a NVIDIA GTX 650 which shows where to connect the PCI-E 6-pin connector to the graphics card.  Most of the HP PC which have a greater power or 460 watt have they support for the PCI-E power connector 6-pin.

  • BlackBerry Smartphones BB does not illuminate

    Hello please help me my blackberry 9900 display does not illuminate. the device lights up red liught comes off and her but he just using the screen please help

    Hello nihalbbman1

    This nuked BB. Take it to a hardware technician.

  • Satellite M30X-127 does not illuminate

    Hello

    Need help!
    My satellite M30X 127 does not illuminate. When I push the power button, it is DIRECTED in turn. But nothing comes on the screen. There is no sound and the fan does not start. I took it to a repair center and they told me the motherboard is fried and it will cost me 400 pounds to fix.
    The guy there offered my 100 pounds for to buy me.
    Please a little help. What should I do?

    Hello

    Otherwise you will search in ebay for the second hand with the good motherboard unit.
    Sometimes people sell books with the failure to display or other parts of damage, but the motherboard is ok.
    You can try to use second hand motherboard in your laptop.

  • Windows Vista does not illuminate

    Hello

    My computer does not illuminate. I have a Dell XPS M1530 with Windows Vista. The problem started yesterday when I left my computer unplugged. When I got home, the screen was blank and I just assumed it was gone to sleep. I pressed the power button and the power light turned on for a brief moment, and then turns off again. Then I turned off the computer by pressing the power button. When I tried to turn on the computer again, the lights on top of my computer, such as A / V controls, enlightened to the mode of the normal sequence, the player makes the usual click and the power button lights up for a short while before leaving. The computer turns on then with the fan running and the little power on the front (not the power indicator main on top), but light a screen empty. Thanks to all this, the screen remains empty, including turning point works manually.

    By pressing the power button when the computer is turned on gives the same result as the first time, where the main power light on the power button lights up briefly, then turns off again without result. Pressing F8 when starting the computer also does not work. I don't know how I'm supposed to solve this problem, the screen never showed any activity during all this. Help please!

    I should note that when I turn on the computer, it would seem she's asleep sleep and rest, as the little light on the front of the computer and the fan turns slightly, while the power led is off.

    Remember - this is a public forum so never post private information such as numbers of mail or telephone!

    Ideas:

    • You have problems with programs
    • Error messages
    • Recent changes to your computer
    • What you have already tried to solve the problem

    It seems you might have a hardware failure, as nothing is displayed on your screen at any time after power on.

    If under warranty, contact the manufacturer of your computer.

    If not under warranty, contact a local and trusted computer repair Shop (not a type of chain stores to the repair facility).

    See you soon.

    Mick Murphy - Microsoft partner

  • Photosmart C309a does not illuminate and its power adapter 0957-2259 LED flashes.

    I have a Photosmart all-in-in-one C309a.  A few days ago I started to receive messages from the ink system dailure, with the 0xc19a003e code.  I followed it to corresponding to a unit of printhead failed, so I ordered a replacement parts HP UK store on Friday, October 14, and it came today, Monday the 17th. Great rotation of the order of HP UK - thank you.

    When I came to adapt to the new print head today, the printer does not illuminate.  No sign of the power of the power button, the buttons command or display.  The power adapter (model number 0957-2259) has a green LED which was (and still is) very quickly - flashing several times per second.  After that the power had been in the power adapter for a while (several tens of minutes I think, I wasn't timing it) noise started coming from the inside of the printer.  It is a kind of regular knocking and seems to echo the led blinks - but there was still no sign of power - including no movement of the ink/printhead assembly.

    I tried to find suggestions online and I've seen a few posts on some websites that suggest that the adapter can be unloaded in some way - but they are almost exclusively on the PC.  Posts read as if there is some kind of capacitor which accumulates (too) charge and discharge it restores the adapter to the operating state.

    I just reconnected the power again to see if there is no change.  After about 10 minutes, hit him coming back for a few moments then stopped.  I noticed that the LED on the AC Adpater was green fixed so I tried the power switch on the printer and it began to start.  But then hit him came back, the display panel started flashing white light and then complete disappearance of signs of life (other than sound knocking, which became intermittent, maybe 5-15 seconds each time).  The LEDs returned to.

    And then after maybe 20-30 minutes with the power, the printer finally tried to start, the light of the AC adapter / CC has been stable and my computer thought that the printer was (briefly) online.

    But the adapter light started blinking and now the printer behaves as if it has no power.

    It seems to me that the symptoms is due to a problem with the AC adapter.  Then

    (A) that seems reasonable?

    (B) is there a way to release or otherwise 'fixing' the adapter?

    or (C) is it better/more safe to replace the adapter?

    TIA,

    Chris

    The adapter can be reset as described here.

  • 13-inch early 2011 macbook pro. light green mag extremely shoddy security cordon, macbook pro stopped charging bought new magsafe. and the led does not illuminate or strings. SMC reset now mac does not recognize battery. unplugged

    13-inch early 2011 macbook pro. light green mag extremely shoddy security cordon, macbook pro stopped charging bought new magsafe. and the led does not illuminate or strings. SMC reset now mac does not recognize battery. disconnected the battery and security cordon mag, maintained hold button / stop for 5 seconds, nothing. Another SMC reset and it is the only way Mac powered on that she has no back light for the keyboard and the fan works on high all the time, please can someone HELP, thanks.

    This is the Office Mac Pro forum. I asked that your post be moved to the MacBook Pro laptop forum.

  • iPhone6 the wifi button does not illuminate.  I want to download the new update.  I restarted the phone, my router is active.

    iPhone 6 with iOS9.3.4.

    WiFi button does not illuminate.  I rebooted the phone.  How can I make this button of the device?

    You can always update your firmware with iTunes. But it seems you might have a larger, likely hardware problem with your phone.

    Try to restore the firmware with iTunes. If this does not help, make an appointment with a genius at the Apple Store.

  • My MacBook Air does not illuminate

    MY MacBook Air does not illuminate?

    Nothing happens when you try?

    Power light?

    Tones? Startup chime?

    If you connect to the charger, which is LED color on the card?

  • iMAC does not illuminate

    MY iMAC, which is several years old does not illuminate

    Take the test/diagnosis. Nobody here can 'pull' hardware problems.

    Barry

  • 2009 iMac 21.5 does not illuminate

    My 2009 iMac monitor is black and does not illuminate.  It has been connected to different computers, macbook pro and a mac mini with the same result. Is there something that can be done or is it just toast?

    Try to zap the PRAM or reset the SMC.

    Board: https://discussions.Apple.com/docs/doc-3603iMac SMC and the PRAM reset   

    Otherwise, take the model to your local store from Apple or a DAD.

Maybe you are looking for