MSC 'CLIPP.

Similar Questions

• EverNote Web Clipper doesn't work anymore

  I used Evernote Web Clipper for a long time, but today it has stopped working and there is a black spot immediately under the figure of the elephant in the Evernote Web Clipper icon on the toolbar of Safari.

  I uninstalled and reinstalled the extension including restart Safari.  I tried this and my MBP is restarted.

  It still does not work.

  I use OS X El Capitan 10.11.16 with Safari 9.1.3 (11601.7.8), Evernote Web Clipper 6.9 and Evernote Premium 6.8 (Direct 453748).

  Any suggestions?

  Thank you

  Steve

  There are several discussions in the forum of Evernote Web Clipper (covering several years until these days) that suddenly does not work. Here is a discussion and looking back on it, there may be several different causes. You can start at the end and see if anything helps: https://discussion.evernote.com/topic/51677-safari-web-clipper-not-doing-anythin g-when-clicked /? page = 5

• Evernote web Clipper cannot set the laptop to save

  I'm under OSX11.05 El Capitan.

  The web of Evernote Safari Clipper has no option to choose the laptop to save pages. It records everything in the General evernote notebook, after which I have to manually move elsewhere.

  This feature was available in the past and is still on other browsers.

  Can pick us up?

  Try to contact the developer.

  https://EverNote.com/

• I have the Evernote web Clipper. It does not appear on the Firefox menu. What should do?

  Evernote web Clipper is correctly installed. The version is exactly for Firefox. The icon does not appear as promised on a toolbar, so I can't webclip my pages of Mozilla.

  Kind regards

  Andris Ozols

  Hello

  Have you seen this article on firefox customization controls, buttons, bar?

  • Customize toolbars, buttons, and commands of Firefox

  But I see a lot of comments about Evernote doesn't work well with Firefox 25 and 26:

  • See comments

  If it is the first time that you have installed the Evernote, check if you have correctly installed:

  • Install Evernote

• AMDS found on services.msc

  I faced problem when connecting my iPhone to the laptop after the new set iTunes to update so I uninstalled and installed again since then I can't find my iphone on iTunes and I checked the services.msc , I can't find the file AMDS & in programs and features. I tried to re-download iTunes several times, but again I can't find SMA on my laptop.

  Please help me!

  To uninstall iTunes correctly, you must follow all the steps detailed here:

  Remove and reinstall iTunes and software for Windows 7 and later versions - Apple Support components

• can I download an Evernote Web Clipper for use with firefox Mobile for the droid?

  Is there an Evernote Web Clipper I can download to use with firefox mobile?

  It does not resemble a version for Firefox mobile. You can ask Evernote to support mobile Firefox in their extension. https://www.EverNote.com/about/contact/support/

• Satellite NB10T: Want to install Win 7 but cannot change the UEFI in MSC mode

  Hello

  I know that it isn't the best article at the post office, but there is no instance void for my computer (Satellite NB10T) series and this problem is bound to win 8
  I'm stuck at the moment: I disentailed 8 victory because I want to go back to 7

  I am aware of
  http://APS2.toshiba-tro.de/KB0/TSB2C03F80002R01.htm
  The problem is that I did not mode Boot under advanced system configuration option; the only thing I can do is enable or disable secure under the Security tab, startup mode which isn't enough

  I also added a supervisor password. It adds a clear keys for secure boot option, but still nothing on the Advanced tab to move to the Csm.
  Clearing keys does not work too.

  I tried to boot multiple linux distro and win7 on usb bootable (theses work on other computers), but no luck. Boot order usb first value of course).
  What can I do?

  Edit: will put some pictures of the uefi

  You posted the screenshots of the configuration of Toshiba utility.
  The boot mode must be changed in the BIOS settings.

  To access the BIOS of the laptop must be turned off.
  Then put the unit BUTTON and press F2 to enter the BIOS.

  In the BIOS, you will find the necessary options: secure boot must be disabled and the UEFI mode must be changed to MSC mode

• Satellite C40 - cannot select MSC option at startup

  Hi all

  I can't boot from ANY external USB drive as I can't select the MSC option in the boot menu in the BIOS. IT is flawed in the UEFI and is grayed out. I disable secure boot, have tried all the suggestions of what I could find. Is there a way to boot from anything except internal SSD? I can't believe that Toshiba would make such a choice disabling!

  My laptop is Toshiba Satellite C40-C-10 q

  Thanks for any help
  Greg.

  Posted by gbursson
  

  Hi all

  I can't boot from ANY external USB drive as I can't select the MSC option in the boot menu in the BIOS. IT is flawed in the UEFI and is grayed out. I disable secure boot, have tried all the suggestions of what I could find. Is there a way to boot from anything except internal SSD? I can't believe that Toshiba would make such a choice disabling!

  My laptop is Toshiba Satellite C40-C-10 q

  Thanks for any help
  Greg.

  Yes, I have the same problem as well. And have requested such assistance. Toshiba does not help this problem. I even paid technical support and they couldn't deal with it. But the only thing I've found works is that if you convert the hard disk to format GPT format, then maybe the laptop detects the hard drive via a usb connection, which you have described.

  before PROCEEDING I must warn you that if you do one of these things that YOU back UP THE information PRESENT ON OUR SSD, OKAY.

  So try and have access to a command prompt.

  You could just hit escape in your keyboard while making a start cold.

  Or even boot from a usb thumbdrive image operating system to access the repair options.

  Then try to access the command prompt.

  Type "diskpart" in command prompt. Then press

  Enter "list disk" in command prompt. Then press

  Find your hard drive from the list of hard drives. Make sure that you fit the hard drive on the list with the size of the disk ssd.

  Once you do this, note the number of the disk.

  Once you make a note of it, select this drive by following these steps:
  Enter "Select disk (for example" select disk 3 ' would be a good example, but it depends on YOUR disc for your ssd number). " Then press

  Enter the command 'convert to GPT", press

  You will see a message response to leave the command prompt you stating the conversion process succeeded in TPG.

  And if you get a message that it could not be converted, then maybe it's because you have information on him and he needs to be formatted to convert format MBR to GPT format.

  ALright. Well he he converted to GPT, and then we continue:

  (1) of type "exit".

  (2) the first step to exit the command prompt.

  (3) restart your computer.

  (4) try to install windows from usb media and ensure that your hard drive is detected in the installation menu.

  Note: If you still don't see not your hard drive then convert the hard disk MBR format in the same way that I told you to do it with the conversion to the GPT format. Then you can consider making a virtual hard drive partition on the SSD, as TPG VHD format and simply boot from your usb thumbdrive and access os repair to have access to the cmd prompt to attach the virtual hard disk options.

  type diskpart. Press ENTER.

  NOTE make sure your hard drive designated virtual name.

  type of the select vdisk file = ------------.

  Type "attach vdisk" press ENTER.

  It will spit out an answer saying that you attached with success.

  type of flight from the list, and then press enter

  find the letter of your thumbdrive os install.

  Once you find it, hold that thought in your head.

  Press exit.
  type followed by a colon ( press enter)

  as in the following line type the word "setup".

  You should get a pop-up of the start screen for the installation of your windows operating system. Yes, click on setup. Agree to the terms. Do a custom installation and NOW YOU WILL SEE your virtual hard drive partition and now you could install os windwos on it.

  Please note: it worked only with image bootable usb windows 8.1 carrier os and not for windows 7 and it may work for windows 10, but I'm not too sure that it will work because it has not worked for me.

  I hope this helps. If you still have problems with detecting the ssd or HDD virtual so I don't know what to tell you. I must warn you that if you do one of these things that YOU back UP THE information PRESENT ON OUR SSD, OKAY.

• When I turn on my new macbook air, the fan starts to make the strong nose. I got this less tha a month ago and I took good care of yhis. I'm tired of ressetting as MSC, but it did not work. Help, please

  When I turn on my new macbook air, the fan starts to make the strong nose. I got this less tha a month ago and I took good care of yhis. I'm tired of ressetting as MSC, but it did not work. Help, please

  If you got less than a month ago, it is still under warranty of 90 days (I think), so take it back to the Apple Store you got OR no matter what Apple Store close to you if you bought it online.

• Satellite L300-1BV - put 'gpedit.msc' on Vista Home Premium

  Hello.

  I did a search on involvement gpedit.msc on vista Home premium, there are a few methods to do, now it works for some people, but other people have problems.
  I was just checking to see if someone similar to me and has a similar laptop, has managed to achieve this.
  I saw had a link and was about to try this method until I saw the comments at the bottom, where the people had stuck and some had managed to do...

  http://www.techmynd.com/enable-grouppolicy-gpedit-for-Windows-Vista-Home/

  So basically instead of trying me this method, I have while I post this question to see if you can actually do this, or are - this all simply not possible...

  There are already files in the system32 folder, such as "gpedit.dll" "gptext.dll" "fde.dll" "wsecedit.dll".
  And I also have the LmCompatibilityLevel registry '3 '.

  But even if some people have managed to do this, it must be possible...

  Thanks for the replies.

  Vista Home premium 32-bit

  Thanks for the link. In the past, I didn't come through this theme, but this seems very interesting to me.
  Let's see if someone here can write comment or experience with this.

  By the way: I am not so familiar with this and would like to know what you expect if it should work?

• Msconfig vs services.msc in win7

  I was then trying to decide if I should use config to control my start-up, start-up deactivation etc, or is it better to use services.msc? What's the difference/consequences of both.

  Any thoughts greatly appreciated.

  Ken

  Services.msc may only provide the access to the services. However, MSCONFIG gives you access to programs from startup, boot options and services also. I suggest that use you MSCONFIG to control your desktop.
  Here is a link that gives you detailed explanations on the MSCONFIG tool and its use:
  http://netsquirrel.com/Msconfig/index.html

• Problem with Gpedit.msc - local Intranet Sites

  Hi all

  I have a Server Windows 2008 R2 with IE 11 (latest update).

  I had a problem with my local Intranet Sites.

  On my server, I added these parameters on gpedit.msc:

  User-computer configuration (both)---> administration model component Windows---> Internet Explorer---> Internet Control Panel Security Page---> Site to the list of assignment---> active---> 192.168.50.226 box--->--->: value 1

  but it seems that nothing has changed.

  I want that when I go to this site (192.168.50.226), it will automatically log in with my credentials. I've already put this setting on Internet Explorer Option:

  

  But it is still asking me the credentials.

  The strange thing I did it work on another server (same OS, same version of IE, same settings gpedit, same everything) and works. Not here.

  If I go to Internet Options---> local Intranet Sites, on my server I see this:

  

  Site window all is greyed out.

  The window on the other server (the working one) is like this:

  

  I do not understand why, I did the same things...

  Maybe someone knows why?

  Thank you very much.

  This issue is beyond the scope of this site (for consumers) and to be sure, you get the best (and fastest) reply, we have to ask either on Technet (for IT Pro) or MSDN (for developers)

  *

  http://social.technet.Microsoft.com/forums/en-us/home s/fr-U.S./Accueil
  http://social.msdn.Microsoft.com/Forum

• Windows 2k8R2 - receiving error when you connect (MMC cannot open the file: C:\Windows\system32\ServerManager.msc)

  Windows 2008 R2 - I just started getting this when I connect, and also when I try to manage the machine:

  MMC cannot open the file:

  C:\Windows\system32\ServerManager.msc

  It is perhaps because the file does not exist, is not an MMC console, or was created by a later version of MMC. This may also be because you don't have sufficient access to the file.

  It always worked before and work for other users simply not me on this particular area. It is a production company, and I need a quick resolution please. Thanks in advance.

  PM

  Hello

  Your Windows is better suited for the public of Windows Server on TechNet. Please post your question in the TechNet Windows server forum.

  http://social.technet.Microsoft.com/forums/en/category/WindowsServer

• Windows Server 2008 windows Firewall is not running and service are not not in services.msc, how do I solve this problem

  as I have found our service of windows windows Server 2008 firewall does not and I checked services.msc and I couldnot find service of windows firewall in the list of services at all. Windows firewall & advance sercurity give error 0x6D9 code. Please let me know how to solve this problem.

  Post in the Windows Server Forums:
  http://social.technet.Microsoft.com/forums/en-us/category/WindowsServer/

• Windows cannot find "secpol.msc".

  To enable or disable application Setup detection I run secpol.msc.  But Windows cannot find "secpol.msc". What should I do?

  Hello

  • What version of windows is installed on your computer?
  • Why do you want to run secpol.msc?
  • What you try to do it on your computer?
  I want to tell you that the local security policy is not available on starter Home premium sound available only in Ultimate, professional company.

  You can use following methods that can help you solve your problem, if you are using full, Enterprise, professional edition:

  Method 1: Run the blocked program or the blocked service

  After Windows Vista starts, you can run programs blocked or blocked services by following these steps:

  1. click on the blocked startup programs in the notification area icon.

  2. tap on the blocked programand then click the program or service in the list that you want to start. Collapse this includes this image if you are prompted for an administrator password or a confirmation, type the password or click continue.

  Method 2: Disable the blocked program or the blocked service

  To disable a program or a service during the Windows Vista startup process, follow these steps:

  1. click on the blocked startup programs in the notification area icon.

  2. click on show or remove blocked startup programs. This starts Software Explorer in Windows Defender.

  3. Locate and then click to select the startup program or the boot service that is in Software Explorer.

  4. click on disable, and then click Yes in the confirmation dialog box.

  For more information, please see the following article:

  Error message when you start a Windows Vista-based computer: "Windows has blocked some startup programs".

  http://support.Microsoft.com/kb/930367