Problem with Gpedit.msc - local Intranet Sites

Similar Questions

• Unable to connect to the local intranet site now with 40 Firefox on OS 10.10.4, what has changed?

  We have a local intranet site and I get in this very well, but go to click on a link that goes to another internal site for our list of phone and it does not ask for my credentials get into the page, it is just straight up with a 401 error, as I entered the wrong credentials. Things were fine with 39.0.3 and I have since then returned to her. Using Firefox 40 on Windows 7, he asked for credentials. I was wondering if there is some sort of bug in the OS X version?

  I have not registered and not connected to other windows or tabs already passwords.

  Something has changed in Firefox 40, but don't know what. I watched the news of the changes, but haven't seen anything coming out that may have caused this.

  If you control the environment, then you could try to operate by affecting network.auth.allow - subresource-auth 2 as proposed in the article.
  I know too little about the question of why it would work in a windows environment, but not on os x - it's a bit confusing...

• Hello! The new version of Firefox, I have a problem with the opening of the site VKontakte. The browser displays the following error message: "Firefox has determined that s.

  Hello!
  The new version of Firefox, I have a problem with the opening of the site VKontakte. The browser displays the following error message: "Firefox has determined that the server redirects the request for this address in a way that it will never end." How to solve this problem? Please excuse me for my English.
  Sincerely, Vsevolod.

  This can be caused by corrupted cookies or cookies that are not sent or otherwise blocked.

  Clear the cache and cookies from sites that cause problems.

  "Clear the Cache":

  • Tools > Options > advanced > network > content caching Web: 'clear now '.

  'Delete Cookies' sites causing problems:

  • Tools > Options > privacy > Cookies: "show the Cookies".

  See also:

  • http://KB.mozillazine.org/The_page_is_not_redirecting_properly
  • http://KB.mozillazine.org/cookies

• Problem with youtube and other video sites

  I have a problem with youtube and other video sites:

  Everything is up-to-date (flash, FF, my plug ins.) but I get crashes when loading the video. I can hear the sound but I see only the first frame of the video.

  I've reinstalled flash/firefox or tried updating them again for about 4 times now and my cookies/cache has also been errased which i usually don't do. If i enter FF's safe mode it also freezes.
  

  I hope someone can help, I looked for answers on google before and I tried everything I saw, but it did not help.

  GRTS,
  agrash

  I had the same problem, I uninstalled the plugin Flash player (Adobe Flash Player 11.0.1 152) and the problem is solved. I installed the plug-in again and the problem came back. So right now I have no flas Player liked-in, but I don't have too much problem. I hope that I will not find another problem, but it seems that everything is OK.

• Problem with links in Dreamweaver CS3 site root

  I have problems with the links from the root of the site when I'm working on my localhost with Dreamweaver CS3.
  
  I'm building a site with PHP, MySQL using the WAMP server. I have a page (www.site.com/index.php) I want to copy in the subdirectories (e.g. www.site.com/about/index.php) then I want to do the copy as painless as possible by using the links from the site root (e.g. /about/index.php). It works on the internet but NOT on localhost.
  
  Why is this? What can we do? Is there a fix if it is a bug? This seems like a simple thing, but it's such a problem.

  > Why is it?

  Because when your (local) server see is you run to the
  ROOT, he goes to ITS root, and rather than the Web site root (for example, htdocs or Inetpub).
  You can work around this by using virtual hosts (google it).

  --
  Murray - ICQ 71997575
  Adobe Community Expert
  (If you * MUST * write me, don't don't LAUGH when you do!)
  ==================
  http://www.projectseven.com/go - DW FAQs, tutorials & resources
  http://www.dwfaq.com - DW FAQs, tutorials & resources
  ==================

  "KBwebpro" wrote in message
  News:fr6g48$GS4$1@forums. Macromedia.com...
  > I have a problem with links from the root of the site when I'm working on my
  > localhost with Dreamweaver CS3.
  >
  > I am building a site with PHP, MySQL by using the WAMP server. I have a page
  > (
  (> www.site.com/index.php) I want to copy in the subdirectories (for example
  (> www.site.com/about/index.php) if I want to make as painless print
  > as
  > possible using links from the site root (e.g. /about/index.php). He
  > works
  > on the internet but NOT on localhost.
  >
  > Why is it? What can we do? Is there a fix if it is a bug? This
  > seems
  > like a simple thing but it's such a problem.
  >

• problem with the easy line of site Web

  I have a problem with a site called easy line. It's using words on my ebay page to link to advertisements.

  No idea how I can get rid of him?

  Do a check with some malware malware, analysis of programs on the Windows computer.
  
  You need to scan with all programs, because each program detects a different malicious program.
  
  Make sure that you update each program to get the latest version of their databases before scanning.

  • http://www.malwarebytes.org/mbam.php - Malwarebytes' Anti-Malware
  • http://www.superantispyware.com/ - SuperAntispyware
  • http://www.microsoft.com/security/scanner/en-us/default.aspx - scan Microsoft Security
  • http://www.microsoft.com/windows/products/winfamily/defender/default.mspx - Windows Defender: Home Page
  • http://www.safer-networking.org/en/index.html - Spybot Search & Destroy

  Alternatively, you can write a check for an infection rootkit TDSSKiller.

  • http://support.Kaspersky.com/viruses/solutions?QID=208280684

  See also:

  • "Spyware on Windows": http://kb.mozillazine.org/Popups_not_blocked

• I stupidly wasted with "gpedit.msc" to prevent some programs from popping up on some user profiles in Windows 7. Now every single program is limited and precise for me to contact a system administrator (which is me).

  I tried to restrict a program like already said, but I messed up with the gpedit.msc, now all but one program is limited to me and I tired to go back to the gpedit.msc but it is too limited. I currently use Windows 7 Ultimate 32 bit version.

  Thanks for your advice, but I'll just format my hard drive and reinstall Windows. Thank you very much however.

• I have a problem with access to a Web site on the computer.

  I just had to Comcast replace a defective modem/router this morning & now there's a site I can't access it on my desk. I can access it fine without thread through my Smartphone or tablet. But not through my office. I have no problem with all other sites as far as I KNOW

  I managed to find the cause of my own. There is no error message, no timeouts. Just went to a blank window. I have disabled the Microsoft Virtual WiFi Miniport card & Realtek PCIe FE Family controller & it solved the problem

• Problem with calendar UpTo on mobile site

  I'm having a problem with UpTo calendar on a mobile site. When scrolling to once the thumb hits the calendar she bounces the page upward. Is there any solution for this?

  Well, after searching in the code, I thought I had accidentally copied and pasted some scroll fx on the page. Once I removed these all worked well. Triadrob, I would like to check if you have to scroll fx on the page. Apparently him don't work well with the up to incorporate.

  Good luck!

• Newbie problems with getting a local server from the BFC set

  It started in another post by me about what I thought, it was a problem with port 8500. I had looked at the getting started with video CFB, and on that, he used localhost as the server name and as the host name. He then assigned port 8500 as the Port of the Web server.

  When I do that it is in the windows as stopped servers. If I try to start it the error I get is

  'Start-up localhost' has encountered a problem

  Make sure that the server is not already running or any application does not use the port of the Web server.

  So as an experience, I changed the port 80, because the admin page doesn't work in http://127.0.0.1/CFIDE/administrator/index.cfm

  The server at the bottom of the BFC window then shows a server running.

  I create a small "Hello World" index.cfm page and when I touched one of the tabs of the browser, Firefox and IE in my case, I get the following error.

  Error during preview generation:

  There is no server configured for the project myproject , to which belongs the index.cfm file. Configure a server in ColdFusion in ColdFusion server settings before you continue.

  What Miss me?

  Thank you

  Dennis

  You must specify the BFC BFC server must use in order to preview the file.

  If you need to associate a server with this project. To do this, right-click on the project-> properties-> ColdFusion server settings.

  Here in the "Server" dropdown list, select the server that you have added in CFB.

  Once this is done, make sure that your project is in the root of the document from the server in your case, that could be the Inetpub\wwwroot.

  Once this is done, the preview should work.

  -Bhakti!

  Adobe ColdFusion team

• problem with Ezvpn and VPN from Site to Site

  Hello

  I want to set Ezvpn and VPN Site to another but the problem is that the EasyVpn that would only work at the Site to the Site does not at all

  I have set up 1 card for two VPN with different tagged crypto

  I had execlude the traffice to NOT be natted to, and when I remove the Ezvpn site to another work well

  crypto ISAKMP policy 100
  BA aes
  md5 hash
  preshared authentication
  Group 2
  !
  crypto ISAKMP policy 10000
  BA aes 256
  preshared authentication
  Group 5
  key address 123456 crypto isakmp (deleted)

  ISAKMP crypto client configuration group easyvpn
  easyvpn key
  domain ezvpn
  pool easyvpn
  ACL easyvpn
  Save-password
  Split-dns cme
  MAX User 9
  netmask 255.255.255.0
  !

  Crypto ipsec transform-set esp - aes 256 esp-sha-hmac vpn

  Crypto-map dynamic easyvpn 10
  Set transform-set dmvpn
  market arriere-route
  !
  !
  address-card crypto easyvpn local Dialer1
  card crypto client easyvpn of authentication list easyvpn
  card crypto isakmp authorization list easyvpn easyvpn
  client configuration address card crypto easyvpn answer
  easyvpn 100 card crypto ipsec-isakmp dynamic easyvpn
  easyvpn 1000 ipsec-isakmp crypto map
  defined by the peers (deleted)
  Set transform-set vpn
  game site address

  interface Dialer1
  the negotiated IP address
  IP mtu 1492
  NAT outside IP
  IP virtual-reassembly
  encapsulation ppp
  Dialer pool 1
  PPP authentication chap callin pap
  PPP chap hostname
  PPP chap password
  PPP pap sent-name to user
  easyVPN card crypto

  DSL_ACCESSLIST extended IP access list
  deny ip 100.0.0.0 0.0.0.255 101.1.1.0 0.0.0.255
  deny ip 100.0.0.0 0.0.0.255 70.0.0.0 0.0.0.255
  IP 100.0.0.0 allow 0.0.0.255 any
  refuse an entire ip
  easyvpn extended IP access list
  IP 100.0.0.0 allow 0.0.0.255 70.0.0.0 0.0.0.255
  IP extended site access list
  IP 100.0.0.0 allow 0.0.0.255 101.1.1.0 0.0.0.255

  Best regards

  The sequence number of card crypto for the static mapping crypto (site to site vpn) should be higher (ie: sequence number must be lower) than the ezvpn (map dynamic crypto).

  In your case, you must configure as follows:

  map easyvpn 10 ipsec-isakmp crypto
  defined by the peers (deleted)
  Set transform-set vpn
  game site address

  map easyvpn 150 - ipsec-isakmp crypto dynamic easyvpn

  Hope that solves this problem.

• I've been using firefox 15.0. I have a problem with character encoding in the sites of gmail and youtube

  I have check the character encoding, but another site work fine.now my character encoding showing unicdoe (UTF - 8)
  I tried to change the iso (88591) West, but it does not change the symbol question mark filled diamond site. symbol of the diamond showing gmail page with an exclamation mark.

  Hello rashgang, enter Subject: config in the address bar of firefox (confirmed the message information where it appears) & get preference named network.http.accept - encoding -right click and restore the default value for that entry.

  If this does not solve the problem already, please also go through the steps to the Web sites look bad or appear differently than they should.

• Problems with blackBerry Smartphones College Web site

  Hello again. It's sort of a specific problem.  I'm going to ICC (college central illinois) to east peoria it.  On our site there is a link for "Blackboard", which is our access to grades, email and taking the online quiz.  I tried to access this site from my BB, a 8330 with verizon running OS 4.5, by using the same user name and password, but it says that my information is not found.  Does anyone else have a problem like this?

  H! And welcome to the forums!

  I had a few VERY good party at your school!

  Ask your grandparents

  If the site looks normal on the browser?

  You can get the connection options but when you

  is that it does not recognize your data? U send the link to test,

  but in the meantime see the webmaster and see if your

  account is valid. Ok?

  Thank you

  Bifocals

• Problems with signature Muse beta Web site

  I am a member of the community of beta of Muse at museprerelease.com. I was able to connect until about a week ago. Now when I go to museprerelease.com and get redirected to a login page Adobe and enter my credentials, I get redirected to sso.museprerelease.com/signin.html. I can connect to the Web site of Adobe and Muse software, but this is just the beta community that I can not connect to. This happens in the browser Chrome and Safari. I also had the same problem when I tried to sign in with a different account. I tried to get help from the cat Adobe support and they directed me to the helpline and then I was directed to another agent, and then he said to ask about it on the forum. If anyone an idea what is happening?

  Can you please email me at [email protected]? Since it is on the beta forums, we cannot discuss in public forums. Thank you

• Problem with the stylesheet in my site

  Hi all

  New user here. I am a novice when it comes to Dreamweaver, I have just started on a degree in computer science. Our first project is to create a website and I use Dreamweaver. My problem is with CSS style sheets. I created my homepage in php format using DIV tags I have a wrapper, header, sidenbar, main area and footer, as well as a solid color background.

  In the CSS panel, I've selected all the tags, right click and you click on move CSS rules. From there on, I created a new .css document and saved under the folder root of the site. I created a new php page and tried to apply the .css, but all that is to come is the solid color background. Other tags such as the header, main area etc do not appear on the page, but they are in the css Panel.

  Someone has an idea what could be the cause? Am I missing something here?

  Thanks in advance!

  There are several ways to get it:

  1 do it manually by creating a 'home' page and use it to start to add the content of each page.  You must remember to always use the FILE | Save as... to avoid replacing your basic however page.  I can never do it!

  2. allow DW for you do this by using the model function.  By all means, please read the F1 help on what are the models and how to use them before trying them in fact.  There are a lot of unexpected behaviors involved when using them.

  For what it's worth, I use templates on almost all the sites I build.  Others do not.  It's a thing of personal style more than anything else, I guess.