Satellite Pro P100 (PSPAEA) and the 64-bit virtualization

Similar Questions

• Satellite Pro P100 PSPAEA - irritating noise of the fan

  Hello

  I have a Satellite Pro P100 PSPAEA and need honestly the laptop more irritating I have ever owned.
  The problem is the cooling fan which tends to regularly turn up to maximum, sat there for a few seconds then turn down.

  Rather than simply successively increase to cool a little screaming for a second or two, then reduced speed. It can do like all the 15 seconds and is driving me crazy especially in a silent room. I am running Windows Vista and the latest version of the BIOS V4.4. I am ready to throw this thing on the door and never buy Toshiba again.

  But before I do that does anyone know a solution?

  Thank you

  I think the BIOS v4.4 requires a newer graphics NVIDIA driver.

  Install the latest graphics driver from the Toshiba site and see how it goes.

• How to enable virtualization on Satellite Pro P100-PSPAE

  HY uall,
  I have a Satellite Pro P100-PSPAE with a CPU T5600, it is a core 2 duo CPU with Intel virtualization technology (B.t.w was one the reasons I chose this laptop in particular).

  Now my XEN-Manager tells me that this technology is not enabled in the BIOS but I can't find any switch to enable it in the BIOS. What I am doing wrong?

  Greetings Michael

  Hello

  Virtualization can be enabled in the BIOS.
  But several versions of BIOS don't support such function.

  If your BIOS does not have option, then you will not be able to activate!
  Sorry to say it buddy, but there is not much to do! :(

• Satellite Pro P100 - GPU and CPU temperature question

  Hello

  I took my Satellite Pro P100 totally out, clean the radiator and vents.
  Also applied new thermal paste.

  The GPU is idling around 50 ° C fan always on
  The CPU is idling around 40-45 ° C fan always on

  To my other Qosmio G30 with a Geforce Go 7600, I got Idle at 35-38 ° C and about the same CPU!

  Then, normal time for the satellite pro or are there settings that I could use to reduce times?
  BIOS is the last of Toshiba, toshiba driver and win 7 power managemnt powersaving...

  Kind regards

  > The GPU is idling around 50 ° C fan always on
  > The CPU is idling around 40-45 ° C fan always on

  I put t think its too high in my opinion the temperature seems ok.

• Satellite Pro P100 - screen and sound problems after upgrade to Windows 7

  Hi all

  I got my Satellite Pro P100 (model number is PSPAEE-00C006EN and the second digit of the serial number is '7') upgraded from Vista to Windows 7, and since then, some bugs seem to have had place - can someone help me on the following:

  -L' screen DIMS increments, irrespective of the fact that I have saved my power settings to stay on FULL (battery or sector)

  -No sound. Once or twice, the sound card worked and settings to say this works correctly (and you can see the movement of the graphic equalizer).
  In terms of PC knowledge, I would be 5/10 (so not a dummy, but certainly not a pro! and we tried a lot of the more obvious things)

  Thank you all

  Hello

  1.) if the screen dim option doesn't properly work, I recommend you to reinstall Toshiba Value added Package. This package controls these functions, the keys FN and others. Visit the Toshiba page for an update!

  2.) did you check if the sound is muted if the equalizer work? In addition you can also try to update the audio driver might it work ;)

• Satellite Pro P100: Brands on the palmrest

  Hello

  I've had my Satellite Pro P100 for barely 6 months now... I bought it again and its has a less than one average amount of usage. Its always been neat, always clean, always take off my watch so it's not scratching the surface, etc. etc. But now I've noticed marks indicating where to rest my palms.

  I expect this from a mobile phone 2nd hand that gets very intense use, but I do not expect this news!

  http://www.Nottingham.AC.UK./~cczcp1/pics/palm-rest.jpg

  Someone else had a the same problem and what is the chance of getting sorted by Toshiba?
  Cheers for any help.

  Hello

  These similar marks appear on my laptop 4 years old. That s nothing unusual.
  It appears after several times because the hands are still on this sector for laptop.
  What to say that are simply signs of use

• Satellite Pro P100: What is the part number for Toshiba for a 2 GB memory module

  Unable to find any sort of emailing this issue so I posted on the forum. Of course this info should be more easily accessible without having to ask.

  What is the number of part of Toshiba for a 2 GB for a PSPA4E-00F007 memory module. It's a satellite Pro P100 T2400

  http://UK.computers.Toshiba-Europe.com/cgi-bin/ToshibaCSG/JSP/SUPPORTSECTION/discontinuedProductPage.do?service=UK&BV_UseBVCook ie = Yes & PRODUCT_ID = 115421

  Gives memory crucial me this module - is that correct?
  http://www.crucial.com/UK/store/mpartspecs.aspx?mtbpoid=A332E10BA5CA7304

  Found, via the Kingstons site - is this okay?
  http://www.dabs.com/ProductView.aspx?QuickLinx=4P3V

  Would be really grateful for official clarification here.

  Thank you very much

  It must be PA3513U-1M2G. Please check whether this module is compatible with your model of laptop. I think so.

  In any case I recommend to buy products of high quality like Kingston modules.

• Satellite Pro M10 overheating and the fan runs loud

  I have a Satellite Pro M10 and when it is the fan on the power grid comes shortly after the start and makes a horrible noise - this has only started happening recently. I tried spraying compressed air (dust) to the air outlet and still have the same problem.

  Other postings say to clean the fan, but I don't know how to access it. I'm worried about overheating problems I work in Africa much of the time and the laptop is subject to hot temperatures.

  Hi Hannah,

  The easy way to clear the dust and debris from the cooling system is to use a vacuum cleaner hose placed on the admission air grids that are usually in the bottom of the laptop (covered by a grid). For maximum effect, I usually place a rag around the pipe to maximize the flow of air through the fans.

  This causes air suction through the radiator CPU the wrong way and ensures that all debris are not pulled into the heatsink, but are removed by fans. You can see a ball of down under the grates that you need to try to clear little by little.

  This technique will not void your warranty since no disassembly of the unit is necessary.

  Kind regards

• Satellite Pro 6000 freezes and the screen is weird random pattern

  Hello

  I recently bought a SP6000 second-hand advertised as having "graphics problems". After 10 minutes or use the laptop freezes and the screen has a strange random pattern all acorss it. The speakers are also a strange hum. I have to stop the laptop and restart.

  I've updated the bios and drivers for card video from the toshiba site, but he always does. Can anyone help?

  Hello

  It's not easy to say why this problem occurs. You have purchased a second hand unit. It is possible that your device has a hardware malfunction, but I can't give you an answer why it is happening. I suppose that temperature increases after 10 min of use.
  Maybe this could be a problem. It could also be a fault of the motherboard. But these are just suggestions. In my opinion, you should ask the service for detailed information.

• Satellite Pro L300-152 and the task bar freezing

  Hello

  The taskbar seems to freeze whenever I use my laptop. I try to click on something like the volume and it freezes, I then gives me the option to restart windows Explorer, close windows Explorer, or waiting for the program to respond. Once it has rebooted the icons for volume and Wi - Fi connection disappear from the lower right corner and are not available through any other means.

  There seems to be no consistency to this incident - it happens when programs are running or not, regardless of how many times I use the laptop either hours or minutes, and there is no delay between the taskbar being insensitive (sometimes it doesn't freeze again, sometimes it freezes just after the restart). I did virus, spyware/adware/mallware scans, clean my laptop, and it had made no difference.

  All I have this problem or knows what could be causing it and how it can be stopped? Any suggestions would be welcome thanks

  Kind regards.

  Hello

  Googling around you will find many forums where people write about this problem of gel. It is obviously related to Microsoft and that there must be a few patches.
  I also found the link to a fix that should help you.
  Visit http://support.microsoft.com/kb/932406/en-us and if this can help you.

  Please let us know if this will help.

• Satellite Pro P100 - cannot boot from external USB DVD

  My internal DVD player on my Toshiba Satellite Pro P100 failed, and my windows is broken.
  So I bought an external DVD drive to boot from, so I can recover the system using the product recovery DVD.

  Now, he actually goes ahead and starts from the DVD. But once in the setup it gives me the message: "ERROR: file Setenv.ini D:\Setenv.ini or X:\Tools\Setenv.ini not found!

  So I went ahead and checked if the file was... it was... but it is on Drive E:\ (probably because it's a USB device I'm starting from)

  -J' did some research and found that I needed to run the command: X:\tools\recogui /FE: say the recovery my files were actually on drive E:-which has helped a little... until I got a new error where it was always looking for the *. TPA file on drive D: eventhough I have via recogui had specified otherwise.

  Now what do I do to understand everything is to the recoveryprocedure on drive E: and not D:, as he seems to think?

  As I am in the middle of a period of review, quick response would be GREATLY appreciated :)

  Bad new boyfriend!
  Boot from external DVD USB drive is NOT possible!

  You can start only from the inside, ODD, HARD, LAN disk and external USB FDD (floppy)

  Greetings

• Official release of the drivers XP and Vista for Satellite Pro P100 - 465 PSPAEE

  When will it be available for XP and Vista for the PSPAEE drivers? Currently there are drivers for the PSPA4E, some of whom work, others do not, no operating system. Yes the laptop is preinstalled with the Vista Upgrade and pilots work, but two of the pilot applications are blocked by Defender (NDSTRay / ConfigFree and VolControl). I couldn't get no option to allow to these (not yet classified MS so they are locked) told me to disable Defender technical support!
  I tried a clean install of my own version of Vista business and had problems of drivers with that as well.

  I would like to run XP until Vista is, shall we say, more effective I would use drivers specifically for her, so time would be very useful.

  I would also like to know why there is a where a finger scanner could go under the 0 on the keypad, and a blocked stop lower PCMCIA port (PCI-E?) when any of these are available as an upgrade option? I missed these upgrade options or is it a case of recycled from another model, they exist? If the latter then it is quite cheap for a new machine :)

  Hello

  We have all the users here can suggest only it seems that Vista and XP drivers are already available for Satellite Pro P100 PSPA4E
  So in my opinion the next drivers for the next series should follow in the near future

  I don t see it differently as to wait

  Of course, you can test different drivers from different series as Sat P100.
  Many laptop models use the same devices and therefore different unique pilots could be compatible

• Satellite Pro P100 - BIOS 3.80 with ACPI and the sound?

  Is the problem with the GPU fan resolved? Can I use ACPI and its now also without hacking DSDT?

  Satellite Pro P100 - Modell Nr.: PSPAHE - 002001GR with the 3.80 BIOS

  Post edited by: renewehle

  Hello

  I put t know any problem with the graphics card, cooling module, but I found this thread on a similar theme.
  http://forums.computers.Toshiba-Europe.com/forums/thread.jspa?threadID=22998

• How can I "downgrade" the BIOS on Satellite Pro P100 - 160 (PSPAE)

  I have just flashed the BIOS on my Satellite Pro P100 4.8.

  The CPU runs at 100%. (90% + for windows explore)

  Only a single core is recognized by my Vista gadget.

  85 CPU temperature

  How can I "downgrade" the BIOS? Where are the older versions?

  When the new BIOS version is available to download older versions are not available more.
  What Satellite Pro P100 you exactly (model name, model number)?

• Satellite Pro P100: losing picture on external monitor when using the DVI - D connection

  Guys,

  I have a Samsung SyncMaster 940MW LCD TV and a Satellite Pro P100 (Geforce Go 7600), recently I bought a DVI - D cable to link them together.

  Now the problem is that when I connected to 1400 x 900 LCD TV screen goes to a black screen several times (usually when there is a lot of activity or I'm resizing windows to the maximum to the minimum).

  Now, I would have thought it would be the LCD TV doesn't do not signal or refresh rate however I connected using a VGA cable and its fine - no problem just no matter how much I minimize my windows or put a lot of activity on the screen. To complicate matters even more, when I run the screens in "Dual screen" mode instead of "Clone" if I put one of them 1400 x 900 to 59hz in 16 bit it works fine...?

  Can someone help please that it made my head that I can't understand what the hell is the cause!

  I've included a list below all the different resolutions / screen modes I tried it and the result.

  Thanks for your time & help.

  Concerning

  Craig.

  1440 x 900 on Samsung 940MW Toshiba set to clone (with 32-bit color) using 3 m DVI
  59Hz - constantly flashing black screen
  60 Hz - constantly flashing black screen
  75 Hz - screen flashes black only when resizing windows

  1280 x 1024 on Samsung 940MW Toshiba set to clone (with 32-bit color) using 3 m DVI
  59Hz - works great
  60 Hz - works fine
  75 Hz - works fine

  1440 x 900 Toshiba on Samsung 940MW set on dual screen (with 32-bit color) using 3 m DVI
  59Hz - screen flashes black only when resizing windows
  60 Hz - screen flashes black only when resizing windows
  75 Hz - screen flashes black only when resizing windows

  1280 x 1024 on Samsung 940MW Toshiba set to clone (with 32-bit color) using 3 m DVI
  59Hz - no option
  60 Hz - works fine
  75 Hz - works fine

  1440 x 900 Toshiba on Samsung 940MW set on dual screen (with 16-bit colors) using 3 m DVI
  59Hz - works great
  60 Hz - very rarely flashes black when resizing.
  75 Hz - intermitantly flashes black when resizing.

  1440 x 900 on Samsung 940MW Toshiba set to clone (with 32-bit color) using 2 m VGA
  59Hz - works great
  60 Hz - works fine
  75 Hz - works fine

  1440 x 900 on Samsung 940MW Toshiba set to dual screen (with 32-bit color) using 2 m VGA
  59Hz - works great
  60 Hz - works fine
  75 Hz - works fine

  Hello

  I hope that you have enabled user s manual supplied with your device. On page 148, you will find a very interesting picture on the supported display resolution.

  I have to be honest with you and say that I am no expert DVI because my LCD doesn't have this port, just HDMI but if I have understood you as soon as you have problem with a resolution of 1440 x 900 only. This resolution is not listed as supported, and I presume that it is not unusual to have a problem.

  Sorry, but I think that you should use maximum supported only resolution 1280 x 1024.