MSE device not responding

Similar Questions

• Interruption of the WiFi connection.  Green light is the Airport Express. Settings Network said the cable for the Wi - Fi connection is not connected or the device at the other end does not respond.

  Interruption of the WiFi connection.  Green light is the Airport Express.  Settings Network said the cable for the Wi - Fi connection is not connected or the device at the other end does not respond.  Tried to reset Airport Express, but remained light amber or orange flashing.  I unplugged it and waited and plugged back into the light turned green.  Rebooted computer (Mac Pro). Parameters of said the same thing.  Managed to create a WiFi "network with the ethernet in the network settings section, and yet I am wireless.  I am online but not wired and WiFi settings still says not connected, and either the cable for the Wi - Fi is not plugged or the device at the other end does not respond. I don't understand this situation.  My original WiFi name disappeared.  How I am on the internet?

  What is the brand and model of the modem Internet you have the AirPort Express directly connected by Ethernet? What exact model number is your Express?

• Network troubleshooting is he diagnosed "your computer is correctly configured, but the device dns server is not responding...". How can I fix it

  I get a lot offline on my laptop. After that I ran the network troubleshooting is diagnosed "your computer is set up correctly, but the device dns server does not respond.  How can I fix this problem please?

  Hello

  1. what operating system is installed on your computer?

  2. are you using wired or Wi - Fi?

  3. you will remember to do recent changes on the computer before this problem?

  I suggest you

  Method 1:

  Empty the Cache DNS (Domain Name System) follow the steps below:

  a. click the Start button.

  (b) in the search box, type command prompt.

  c. in the list of results, right-click command prompt, and then click Run as administrator.  If you are prompted for an administrator password or a confirmation, type the password or provide confirmation.

  d. at the command prompt, type ipconfig/flushdns.

  Method 2:

  If the previous step fails, follow these steps and check if the problem persists:

  a. click "Start", enter "NCPA. CPL"(without the quotes) and press ENTER.

  b. right-click on the connection you use for the local connection, and then click "Properties".

  c. Click to select 'Protocol Internet Version 4 (TCP/IPv4)' and then click 'properties '.

  d. in the Internet Protocol window, we will change the "Preferred DNS server" to 208.67.222.222

  e. click 'OK' twice to complete the change.

  f. If the problem persists, please repeat the steps and change the "Preferred DNS server" to 208.67.220.220.

  Method 3:

  If the previous step fails, follow the steps described in the following link:

  http://support.Microsoft.com/kb/928152

  For more information, check the following links:

  http://Windows.Microsoft.com/en-us/Windows/help/wired-and-wireless-network-connection-problems-in-Windows

  http://Windows.Microsoft.com/en-us/Windows/help/wired-and-wireless-network-connection-problems-in-Windows

• I get this message - your computer seems to be configured correctly, but the device or resource (DNS server) is not responding)

  Hello

  My computer is stuggling to access internet, I get this message - your computer seems to be configured correctly, but the device or resource (DNS server) is not responding).  All the other computers in my house are connected without difficulty.  Any suggestions?

  Thank you

  I solved the problem.  When my router lost power, somehow the addresses changed if the IP address of the Dell Wireless computer is no longer fell in the pool of addresses maintained by the router.  When I've reconfigured by router and had released and renewed my IP on the Dell computer, everything started working again.

  Thanks for your help!

• "No access to the network" problem in Windows 7 and error message "your computer seems to be correctly configured but the device or resource (DNS SERVER) is not responding."

  Hello, I have a desktop PC and a laptop (DELL Inspiron N-4050).
  I have problem with my internet connection cable which is working fine on my PC, but does not not on my laptop giving an error "no access to the network.

  When I troubleshoot it says "your computer seems to be correctly configured but the device or resource (DNS SERVER) is not responding."
  I said to many technicians of microsoft online response, but they could not solve my problem and said this is my DNS problem and advised me to contact my Internet service provider. Guess it's because of my internet so why it works on my PC not on laptop?

  Yesterday, my ethernet cable pulled out my cell phone and I couldn't connect to the internet more. But on my desktop PC, it works perfectly fine. (I do not use wifi, if this information is also required) I have studied several threads with similar situations, and I have tried different methods to solve the problem to no avail. I did a system restore, but I'm having no luck. Also, I did not of the latest changes with my anti virus software and my LAN card drivers look to date.

  When I remove my cable from the laptop and again connect my cable then it works but only after the PC sat for awhile.
  1.I did flush DNS by typing "ipconfig/flushdns" in the command prompt.
  2. my IP address, DNS, subnet mask etc are set to automatic.
  3.I also added physical address taken from command line giving "ipconfig/all". for the properties of the network driver settings.
  4.I ' installed the drivers to date of 2014 on my laptop.
  5.I did a lot of searching the web, but they do not solve my problem.

  Please help me to solve it.
  I appreciate your help.
  Thank you.

  Hello Hall,

  Please keep us updated on the status of the issue.

  I suggest you to follow the steps in this Microsoft article troubleshooting and check if it helps:

  Error message "your computer seems to be configured correctly, but the device or resource (DNS server) is not responding" in Windows 7

  http://support.Microsoft.com/kb/2779064/en-us

  Hope the helps of information.

  Please reply with the results, in order to help you solve the problem.

  Thank you

• gpedit.msc won't work; "not responding".

  Well, I was originally a problem changing my background image, because it would change to black... so, I found this... http://answers.microsoft.com/en-us/windows/forum/windows_8-desktop/cant-change-desktop-background-on-windows-8-pro/c0469b41-5c57-4a1b-8ad5-6d37e4f05d83... But whenever I try to run gpedit.msc his "not responding" I tried for 30 minutes of waiting... to restart my computer. I don't know what to do. Everything seems to be problem after problem with windows 8.

  I have one account on my computer and I am the administrator.
  Thanks in advance for any help!

  Hello

  The question of GPEdit.msc is essentially identical to an Explorer hanging issue (similar fix).
  So, use the following methods. If you still have specific GPEdit help check with Experts of
  TechNet where he is taken care of.

  TechNet - XP, Vista, Windows 7 and Windows 8 IT Pro (Windows 8.1 Overview & RTM)
  http://social.technet.Microsoft.com/forums/en/category/w7itpro, w8itpro, windowsvistaitpro, windowsxpitpro, windowsintune

  ======================================================

  Crashes Windows or freezes
  http://support.Microsoft.com/kb/2681286#method22

  =======================================================

  More troubleshooting if necessary:

  Check with the support of the system Maker (manufacturer of motherboard for customized systems), their
  online resources and the drivers and ask questions in the forums about known problems.
  Updating the BIOS , drivers of low level chipset and embedded and separate major
  device drivers (anyone who can have an impact on the speed of startup and performance).

  Note the use of Win Key + X and Win Key + W (to go on the Control Panel, Run and parameters
  According to needs). Win + D key calls the office and using Win Key active / disable the office and
  Splash screen.

  Check startup programs.

  Right-click in the left lower corner - Manager of tasks
  Or Windows key + X - Manager of tasks
  Or right click on the taskbar - task manager

  Check the Startup tab.

  More troubleshooting:

  How to perform a clean boot for a problem in Windows Vista, Windows 7,
  or Windows 8
  http://support.Microsoft.com/kb/929135

  Other programs to help:

  Autoruns - free - see what programs are configured to start automatically
  When your system boots and you connect. Autoruns also shows you the complete list
  locations of registry and files where applications can configure start automatic settings.
  http://TechNet.Microsoft.com/en-us/sysinternals/bb963902.aspx
  Process Explorer - free - find out what files, registry keys, and other objects
  processes have open, which DLLs they have loaded and more. This unique
  powerful utility will show you even owned by each process.
  http://TechNet.Microsoft.com/en-us/Sysinternals/bb896653.aspx

  -----------

  Especially what antivirus/antispyware/security program do you use? Windows 8
  comes with Windows Defender, which is a complete antivirus based on MSE in Windows 8.
  If using a 3rd party program uninstall it and run the removal of its creator tool to prevent
  remains. In most cases Windows Defender automatically recharges.

  List of tools to clean/uninstall anti-malware programs
  http://answers.Microsoft.com/en-us/protect/Forum/protect_start/list-of-anti-malware-program-cleanupuninstall/407bf6da-C05D-4546-8788-0aa4c25a1f91

  Uninstallers (removal tools) for common antivirus software
  http://KB.eset.com/esetkb/index?page=content&ID=SOLN146

  =======================================================

  Try these to erase corruption and missing/damaged file system repair or replacement.

  Windows key + X (or right click in the lower left corner) - (Admin) command prompt

  C:\Windows\System32\ >

  At the prompt, type in SFC/scannow above
  (There is a space between C and /)

  How to run the command "SFC/scannow" at startup or in Windows 8
  http://www.eightforums.com/tutorials/3047-sfc-scannow-command-run-Windows-8-a.html

  -----

  Then run CheckDisk (chkfdsk/f/r)

  File (formerly Windows Explorer)

  Right click on drive C: - Properties - tab tools - error checking - Check

  Windows 8 - improve performance by optimizing your hard drive - see "to repair a drive:
  http://Windows.Microsoft.com/en-us/Windows-8/improve-performance-optimizing-hard-drive

  How to check a drive for errors with "chkdsk" in Windows 8
  http://www.eightforums.com/tutorials/6221-chkdsk-check-drive-errors-Windows-8-a.html

  =======================================================

  These should help:

  Ways to improve the performance of your PC
  http://Windows.Microsoft.com/en-us/Windows-8/improve-PC-performance

  Maintenance & performance
  http://Windows.Microsoft.com/en-us/Windows/performance-maintenance-help#performance-maintenance-help=Windows-8&V2H=win7tab1&V3H=winvistatab1

  Crashes Windows or freezes
  http://support.Microsoft.com/kb/2681286

  =======================================================

  If necessary:

  Try to do a "Refresh your PC without affecting your files" (or modification of your personal data
  settings) or even a restore. Be prepared to re - install the programs, applications will remain.
  And having redundant backups of your files on the disk main hard is always a
  good idea.

  Windows 8 includes special discount methods (keep files and settings) or a reset
  (new installation remove all).

  How to restore, refresh or reset your PC
  http://Windows.Microsoft.com/en-us/Windows-8/restore-refresh-reset-PC

  How to create a system image to refresh your PC in Windows 8
  http://support.Microsoft.com/kb/2748351

  How to update Windows 8
  http://www.eightforums.com/tutorials/2293-refresh-Windows-8-a.html

  How to reset Windows 8
  http://www.eightforums.com/tutorials/2302-reset-Windows-8-a.html

  If you need a repair disc:

  Create a system repair disc
  http://Windows.Microsoft.com/en-us/Windows7/create-a-system-repair-disc

  How to create a "system repair disc" (CD/DVD) in Windows 8
  http://www.eightforums.com/tutorials/2855-system-repair-disc-create-Windows-8-a.html

  I hope this helps.

  Rob Brown - Microsoft MVP<- profile="" -="" windows="" expert="" -="" consumer="" :="" bicycle=""><- mark="" twain="" said="" it="">

• Buttons do not respond. Can not restore because of this.

  Buttons do not respond. Can not restore because of this.

  What buttons? You can restore a classic iPod via iTunes without using the buttons on the device. Restore it will not fix hardware problems.

  TT2

• iPhone do not respond since ios 9.3.2.

  Since the update of 9.3.2

  I'm not able to operate my phone iphone 6, the screen does not respond, the phone seems to be quierying all the time, preventing the operation of the device.  When it is connected to a power source, my iphone 6 has a mind of its own, it begins to open applications, make phone calls to random contacts and is inadmissible.

  Try to press and hold the power button / stop and the button "home" at the same time. Wait for the phone to restart, and then try to use your screen as you normally do.

  If this does not work the first time, try it again, until it works. It might take three resets for screen to start working again.

• MacBook Pro: Integrated keyboard and mouse not responding pluse

  I have a MacBook Pro 13 ", early 2015, installed with OS X 10.11.4.

  I use it mainly to work, with the screen closed, an external display (via Thunderport) and an Apple and change Vertical Mouse 4 - times connected via Bluetooth wireless keyboard.

  Before I get home, I open the screen, disconnect the power cord and power cord screen Thunderbolt and then close it. I leave the keyboard and Bluetooth mouse on as I leave the office.

  It works normally, but yesterday my Mac kept looking for Bluetooth devices home and would not respond to the built-in keyboard and mouse (with the exception of the switch when maintained supported 10 seconds for a forced stop). Reboot doesn't change anything and I tried to reboot with the disk (Cmd + R) utility or reset the NVRAM (Cmd + Option + P + R) and the keys did nothing. Reset SMC (Shift + Ctrl + Option + power) does not seem to do anything either.

  When I connected a keyboard Apple USB C, the keys have been recorded, but it would still find a missing mouse and go anywhere else than the screen "You are looking for a Bluetooth mouse".

  Back at work today, everything works: built-in and Bluetooth devices.

  Any suggestions?

  Update: the built-in keyboard and trackpad now don't work at all, even when Bluetooth devices are connected.

• Satellite A210 - 17l - keyboard does not respond

  Hello

  I have a problem that is driving me crazy.
  When I press F2 or F12 to switch on the keyboard behaves as it should.
  However if trying to load a Boot CD or Usb car via the options F12, the device is recognized
  but click on any other key, the cursor just sits there intermittently at me and the keyboard does not respond.
  What makes strange, is that an external keyboard is recognized but the mirrors one internal.
  I have the latest version of the bios update.

  F2 in the bios - ok keyboard.
  Start in win7 - keyboard ok.
  Insert bootable back disk via F12 option-charges but no keyboard reagent.
  I think a partial corrupt bios
  Someone has ideas about problem or even a solution.

  Posted by mr.pound
  

  but click on any other key, the cursor just sits there intermittently at me and the keyboard does not respond.

  And what should happen on this stage?

  For me, this looks like a problem with your startup disk.
  I installed OS using different disks of Microsoft or USB recovery media and all you have to do is click on most of the time on the button NEXT.

  If the keyboard works in BIOS and Windows, I see no problem with the keyboard there.

• some of my numbers keyboard do not respond on my ipnone 5 c

  some of my numbers keyboard do not respond on my iphone 5 c

  Try resetting your device. This will not erase your data stored on that device.

  • Press and hold the sleep/wake button
  • Press and hold the Home button
  • Press and hold both buttons until the display turns off and on again with the Apple logo on the subject.

  Alternatively, you can go to settings - general - reset - Reset all settings

  If that doesn't work, restore your device to factory settings. Please note that this will delete the data on your device.

  Take a look this Apple Support article: use iTunes to restore the iPhone, iPad or iPod to factory settings - Apple Support

• Satellite Pro L450D black screen and will not respond to any keys

  Hello

  My niece has used his Toshiba L450D for almost a year now and he really liked it, who was until last month. She turned on her laptop and when she presses the button of the mouse, the button cracked and he fell into the laptop.

  Now my brother contacted Toshiba and I was told because it is under warranty it might return for repair because it was a common fault. Then he he packed in loads of air bubbles and a box to make sure it was safe.

  A few weeks later he came back repaired but we were all shocked that the laptop was put in a very loose box and you could hear this rattling noise. When we turned on the battery was flat and we had a new boot menu.

  As she installed it Windows 7 laptop would boot directly into Windows 7, but now after the repair of the laptop shows a menu black screen with as follows:

  + Windows 7 +.
  + Recover Windows to Factory Settings [active EMS] +.

  So we started in Windows and everything went well, but now after 5 or 10 or even 20 minutes, laptop displays a black screen and will not respond to keys or mouse movement. There is nothing on the screen its just black.

  I started in SafeMode (which was more difficult with the new menu) and it does the same thing. I even managed to do a virus scan quick who took 3-4 minutes and was clean.

  I would like some advice on what my niece is very angry, and it's difficult to explain what is happening to a child in the primary school.

  Any help would be grateful.

  Hello

  Have you tried the option of HARD drive recovery?

  If this is not the case, try to set the notebook back to factory settings using HARD drive recovery.
  Turn on the device, press F12, choose repair my computer, then select Toshiba HDD recovery.

  I hope it will work!

• Tecra M7 - pen does not respond

  Hi, does anyone know what I have to installed to get the pen works on a version a M7 Tablet 2005 scripted. All devices are detected and working properly, but the stylus just does not respond.

  Thanks, will

  Salvation will be

  Is your preinstalled Tecra with supplied recovery media? Sorry, but if you write on pen that I put t see any reason why it shouldn't work.

• Equium A60 - USB ports do not respond

  Hi guys,.

  Could someone help me please, I got a Toshiba A60 equinum which worked perfectly up until when all the USB ports on the laptop refuses to answer. I tried to bypass the USB by getting a cardbus to be inserted into the pcmcia bus, but still did not respond. I can guess that the chipset may have problem. I'm thinking of the chipset was corrupted software.

  If my guess could be considered nearest, what could you suggsest I wish someone could help profer a solution to this problem.

  Thank you
  Sola

  Hi Sola_2,

  Wait a moment and have a look in Device Manager. Are the USB port which is are listed correctly?
  You should try to remove all the USB ports on the Device Manager, and then restart the laptop. After that the ports will be recognized again.

  Try by also updating the BIOS and chipset driver. Both can be downloaded from the Toshiba site.

• iPhone 5 s screen sometimes does not respond to touch

  I bought for almost a month, there is however a problem annoying me lately.

  As a first step, the screen did not touch once per day.

  A few days later, this problem happened all too often that I just couldn't ignore it more.

  Fortunately, I found the way to resolve is to turn off the screen and then turn it on (not reboot the phone), so the screen can work again.

  Just as I was about to return to drag it to the screen, the problem of the screen does not appeared immediately, and that just happened to me when you type these words... so I could only repeat these steps once more. I must say that is rarely the case, most of the time, I only need to do this once.

  I would like to ask if anyone knows how to fix this bug (maybe?) completely

  Thank you and sorry for my bad English ^ ^ |

  To make sure that it is not software related, set it back to factory settings, without using any data backup later. Set up the rest of the personal settings manually and test the screen.

  If the screen is working again, restore the last backup. If the problem returns, the data backup contains damaged data, causing your issues.

  If it still does not respond, it is a hardware problem and the phone must be repaired by Apple or an Apple authorized Service Provider:

  Use iTunes to restore your device to factory settings - Support Apple iOS

  Find an Apple authorized service provider

  Apple iPhone - contact Support - support