Problems with HSRP output

Similar Questions

• Problem with analog output card FPGA 7851R

  Hi all

  First of all, I am a beginner in FPGA programming.

  In my application, I'm generating an analog voltage, for example 6V in a FPGA 7851R card is placed in 1033 PXI. I'm passing this tension to an another PXI with LabVIEW RT. Instead of getting a continuous 6V I'm getting some spikes with 6V. I enclose the screenshot of waveform which has obtained in PXI with RT the PXI card used is PXI-4462. I also enclose the code. Why am I getting this ears? Will there be another procedure to generate a continuous signal? Is there any problem with the acquisition?

  Please help me

  Thank you & best regards

  Rajesh R. Nair

  Thanks sumit.

  Problem is solved!

• Strange problem with analog output PCI 6251 and BNC-2110

  I'm controlling current source of third parties using the connectors of analog output on my card PCI 6251 and BNC-2110.

  The current source needs an input signal of 0.1V. I tested it using a battery, the potentiometer and the voltmeter, and by manually adjusting the voltage of power current works - current output with control voltage scales according to the specifications and is relatively stable.

  The data acquisition card works too - when I connect a voltmeter to the AO0 AO1, the measured voltage corresponds to the target with great precision value.

  But when I connect the current source of third AO0 AO1 data acquisition card, the measured output voltage drops and fluctuates. This applies to both channels of the AO.

  I wonder what is the problem here. I suspect it could be a matter of the grounding - the current analog control of the source is an entry with two floating terminals differential. I tried to return the switches FS/GS on the BNC-2110, but that makes no difference.

  Anyone knows similar behavior? Does anyone have any suggestions?

  
  

• Problems with HDMI output

  I have a HP G61 Notebook PC with windows 7 Home premium

  When I plug the HDMI cable into the laptop and connect it to display the output of the speakers or headphone stops. The bars of output on the mixer vloume display output from the HDMI device, but nothing independent headsets and headphones or speakers.

  What is the case can someone help?

  OK problem solved. I typed sound in the search on windows 7. Then went to the HDMI audio output and off the exit. I hope this helps someone the with this problem

• Satellite P300-150 - problems with HDMI output

  I recently reformatted my hard drive due to a nasty virus. I now put my old favourate XP Pro with service pack 3. Never had very well with Vista.
  I managed to find almost all the drivers, I think I need, but the HDMI does not work and I can't seem to find the HDMI for XP/Vista Manager only. XP is too old to support HDMI?

  Is their a fix or a piece of software that will lead the material in an XP environment?

  Hi markjj,

  Normally you n t need a special driver for the HDMI connection. It is only important to install the driver from Toshiba Web site viewing. After that, you can use the HDMI connection and switch between monitors when you press FN + F5. It s the same procedure as in Vista or other operating systems.

  So have you ever tried on XP HDMI connection?

  Test and give us some information. If it doesn't we can try to solve this problem. :)

• Problem with VGA output via CDM on XPS 12

  When I connect my XPS 12 via a mini display to VGA to an external monitor, there is no problem. This changes however when I connect it to a beamer/projector. Then it is af if my laptop does not recognize that and I just cannot make it work. When I test the card on my macbook to friends, it does not work.

  Do I need a special for this or is my laptop VGA adapter broken?

  On Windows 7 or 8, I recommend trying the following:

  -Hold down the Windows key and then press the button P to scroll through the choices of the external display

  -First try the only projector choice and test it with Extend or duplicate

  If that does not solve the problem, I do it with the following:

  -Open Intel graphics and Media Control Panel (located in your Control Panel or system tray)

  -Go in the multiple views section and make sure that the mode of operation is not defined for a simple screen

  -   Active displays should show the total number of exits is connected as well (ex: 2 = integrated display + monitor)

  If these two options do not work, you should remove your graphics driver and do a clean install of the latest graphics driver from the Dell support site.

  Kind regards

  -EE

• Problem with the output of HTML5 video

  Hi, I have this course that I build. I need to insert several videos. 1 per slide. I managed to insert the .mp4 videos and when I export out of HTML5, the first video works fine. While all the other videos does not work. I just hear the sound but can't see the video. Also, if I go back to the first video that was working, it does not yet appear, but I can hear the audio.

  As soon as you have more than 1 video in the project, the first works well the first time that you see, and then if you go back, you hear only the audio, not the images. All other videos in the project does not appear, but you can still hear the audio.

  I use the latest version of Captivate 6, exit to HTML5.

  Thank you!

  Hello

  Welcome to the Adobe Forums.

  Can you please insert the video as the "video event" and then try to publish the HTML 5 output and display the output.

  Also can you please try with any other example of .mp4 file and then view the output as HTML5.

  Thank you

  Loveesh

• T420 (4180 - 1 G 8): problem with VGA output for external monitor

  
  

  Followed by:

  I tried the latest driver Intel "generic" after you completely uninstall the device from Device Manager driver: without success.

  I tried a different monitor from another manufacturer: no chance.

  To remove the device driver as a cause as possible, I tried to boot from a boot Unbuntu CD: no chance.

  I activated the home screen on the VGA port in BIOS: screen stays black.

  I suspect that the VGA on my new Lenovo Thinkpad T420 port just does not at all.

  I opened a call with my material support.

  Kind regards

  Stéphane B.

• Problem with the output of the tools I refine my selection.

  The outlet box will be released only to the 'selection '. All other options are grey.  I can't also select "decontaminate colors".

  Check the picture Mode and the bit depth of the document.

  In the pse 13 Editor go to Image > Mode and click on 8-bit/channel RGB color and

• Strange sound problem with Satellite L740 TV outputs

  I'm having a strange problem here... I googled this several times already, and I only found the same solution mentioned several times and the given solution * not * work is to me.

  I have a Toshiba Satellite L740 running Windows 7 Home Edition Premium, with a 64-bit Intel Core i5 - 2410M @ 2.30 GHz CPU and 4 GB of physical RAM. My problem is the following...

  There are two different TVs in my house that I regularly connect my laptop via HDMI cable.
  The first is mine, and I can get sound through the TV very well when I plug it in.

  Sometimes, however, I will disconnect the computer from my TV and not get any sound through the laptop because he's trying to output to external speakers to TV.

  More importantly, when I connect my laptop to my * roommate * TV (the same make as mine, you mind), I can not all the sounds of his TV at all.

  This is a recent problem. Until this morning, I was able to get noise from two TV very well and only sometimes had problems with sound through the laptop itself, which has been easily resolved by restarting.

  It's just a hunch, but it's almost like * doesn't realize that there are two different TVs * that it is connected to my computer. Maybe it's stupid, I don't know, but be it, it's frustrating...

  * ALSO: * I've seen dozens of suggestions that I put my HDMI audio as default device. Yes, I did. It wasn't the issue. Is the same to activate my audio drivers in Device Manager. They are all turned on, so it's not that either. Any ideas?

  It's a bit strange if you connect the laptop to two identical televisions and use the same HDMI cable to the TV.

  Unfortunately, it all works automatically and I put t know if you can force your laptop to recognize two TVs on the same path.

  In the worst case you have to do it manually in the sound properties > playback devices.
  If it works with four mouse clicks you can change.

  I tested my laptop with two different TVs.
  At home, I have a Toshiba TV and at the office we use Sony. On both automatically get sound on the TV speakers.

  If you will be able to find the solution please let us know.

• Problems with the digital input/output

  Hello

  I have a little problem with my card PCI-6143. I would use two connectors digital one as a starter and one as an output. Now, I have the problem that I do not know how I address them. The input works as I want but not the output.

  As an example. I call my channel output on this name: Dev1/port0 / line0:0.
  With this call, the application works very well. If I change the output channel to Dev1/port0 / line4:0 I get an error that the values can be read and 0 and 1 are valid values.
  I hope that the call is right, I wrote that out of my head.

  My questions are. Is it correct to call a single digital channel with this name?
  I'm not sure because I do not understand what these means 'line' and if I allocate really single channel or more.
  The second question is, can someone give me an example of how I assign two digital channels (how to address them)?
  I know it's maybe an easy question, but I can't seem to get it corrected.

  Hope someone can help me.

  Best regards

  The syntax that you use is intended to select several channels: the numbers are the initial and final channel in a subsequent channel list. Thus, written Dev1\port0\line0:4 means 5 lines are included in the read/write (FWIW written 4:0 has the same effect). It is redundant but good writing line0:0, which means a single line, but you can write to Dev1\port0\line0 which is simpler.

  This is a help page on this topic.

• Problem with output 5VDC NI 9411 channel

  Hello

  I'm having a problem with output 5VDC NI 9411 channel. According to the specification of the module, it was stated that the module required external power from 5 to 30 VDC. Game of supply the module with the requirement of tension, I am still unable to get the output voltage of the output channels. Does this mean that the output voltage may be available depending on the program?

  Thanks in advance,

  Kind regards

  Mike640

  Hi Mike,.

  Thanks for posting on the forum of National Instruments.

  You should still be able to get an output voltage in properly feeding the NI 9411 and your external device.

  If you don't have a power supply of 5V to power the external device directly, or if you want to simplify the cabling, you can connect an external power supply to the Vsup and COM terminals on the connector terminal block screw NI 9411 and connect the external device to one of the pins Vout + 5. If the external device is already powered, you have not need connect a power supply on the NI 9411 or plug the Vout of + 5 to the external device.

  I hope this helps.

• Strange problem with analog simultaneous output / input

  I use a card PCI-6221. I have an application which generates 2 waveforms (finished samples) and simultaneously records 4 channels of analog input. I am using the sample clock AO as the sample for the analog clock.

  As a test, I plugged in the first AO (AO0) all 4 channel inputs. What happens when I run the vi, it's that the first sample on the first string (AI0) has the value of the last sample that was out on AO0, of the previous generation.

  Example:

  AI0 AI1 AI2 AI3

  -0.369-0,001-0,001-0,001

  -0.001 0.062 0.062 0.062

  0.062 0,124 0,124 0,124

  etc.

  I understand that it is a problem with the relative time of update of the AO and sampling of IT.

  He has to go: AI0 read / write AO0 / read AI1 / read AI2 / read AI3.

  I use DAQmx Timing (sample clock) to specify the clock AO as the sample for the AI clock. I noticed that this has an advantage of input terminal called assets. Ah, I thought - if I put the active side to neutralize the AI always begins sampling half a clock cycle after the OD has updated. Evil. It makes absolutely no difference. Maybe the AO clock signal is a very short pulse?

  Is there a way to specify the order in which updated inputs and outputs analog / sample?

  Hi CDancer,

  Change analog output voltage is not instantaneous. It depends on the speed of scanning of the Council with the difference the tension of the previous.

  You're right that the AO sample clock is a very short pulse. As far as I remember, it is the order of 50 ns.

  Here are two ways to insert a break between the tasks of HAVE and AO:

  • Delay the first conversion of IA (AI0) regarding the sample clock HAVE: use DAQmx calendar > more > converted > sample clock delay > Delay and DelayUnits properties.
  • Delay the sample clock HAVE first with regard to the relaxation of beginning of AI: use the DAQmx > start > more > Delay and DelayUnits properties.

  Brad

• problem with the definition of a boolean as output parameter type

  Hi, I have a problem with the definition of type boolean as output parameter and it must return true if the query procedure retrieves one line else it shouuld return false

  Hi, I have a problem with the definition of type boolean as output parameter and it must return true if the query procedure retrieves one line else it shouuld return false

  And what are the issues? Its simple.

  SQL> create or replace procedure is_emp_exist
    2  (
    3     p_empno  in  emp.empno%type
    4   , p_result out boolean
    5  )
    6  as
    7     l_empno emp.empno%type;
    8  begin
    9     select empno into l_empno
   10       from emp
   11      where empno = p_empno;
   12
   13     p_result := true;
   14  exception
   15     when no_data_found then
   16        p_result := false;
   17  end;
   18  /
  
  Procedure created.
  
  SQL> declare
    2     l_result boolean;
    3  begin
    4     is_emp_exist (7788, l_result);
    5
    6     if l_result then
    7        dbms_output.put_line('Employee Exist');
    8     else
    9        dbms_output.put_line('Employee does not Exist');
   10     end if;
   11  end;
   12  /
  Employee Exist
  
  PL/SQL procedure successfully completed.
  
  SQL> declare
    2     l_result boolean;
    3  begin
    4     is_emp_exist (1000, l_result);
    5
    6     if l_result then
    7        dbms_output.put_line('Employee Exist');
    8     else
    9        dbms_output.put_line('Employee does not Exist');
   10     end if;
   11  end;
   12  /
  Employee does not Exist
  
  PL/SQL procedure successfully completed.
  
  SQL>
  

• We have a problem with a freshly installed with CC 2014 and Acrobat Pro DC - Mac whenever we click on the output preview tool, Acrobat Pro DC instantly crashes. It occurs without worrying that press ready PDF we open. Help, please!

  We have a problem with a freshly installed with CC 2014 and Acrobat Pro DC - Mac whenever we click on the output preview tool, Acrobat Pro DC instantly crashes. It occurs without worrying that press ready PDF we open. I tried to delete the folder/Library/Application Support / Adobe, but without success. the App said CC DC Pro Acrobat is installed, but the uninstall option is grayed out (I thought back to Acrobat Pro XI, but I can't do it yet). We use a local server to send updates of Adobe software, which could be the reason. Ideas accepted with gratitude as to how we can get insight into the output works again!

  Known issue for PDF files that have an output RGB mode.

  Version update of the software that will be released next month with the fix.

  -Dov