MSTSC.exe works intermittently on a PC, freezes on open almost every time

Similar Questions

• reently downloaded updates and now my computer doesn't work well, I get a mozilla does not message every time I try to look for

  After updating my mozilla, I get a message not responding

  Hello bwallace57, your "more detailed system", it seems you have a little suspect for malicious software extensions (GetSavin, MyPoints Score!, MyPoints Toolbar, entry-level consumer).

  You can verify the behavior of firefox in safe mode (safe mode are disable the extension)

  • In Firefox 29,0 and above, click on the menu button

    

    click Help

    

    then select restart with disabled modules.

  If Firefox is not running, you can start Firefox in Mode safe mode as follows:

  • On Windows: Hold down the SHIFT key when you open the desktop Firefox or shortcut in the start menu.

  When the Firefox Safe Mode window appears, select "start mode safe."

  

  If the issue is not present in Firefox Safe Mode, your problem is probably caused by an extension, and you need to understand that one. Please follow the section Troubleshooting extensions, themes and problems of hardware acceleration to resolve common Firefox problems to find the cause.

  To exit safe mode of Firefox, simply close Firefox and wait a few seconds before you open Firefox for normal use again.

  also, you can try these free programs to search for malicious software that work with your existing anti-virus software:

  • Microsoft safety scanner
  • MalwareBytes' Anti-Malware
  • Anti-Rootkit utility - TDSSKiller
  • AdwCleaner (for more information, see this other AdwCleaner download page)
  • Hitman Pro
  • ESET Online Scanner

  Microsoft Security Essentials is a good permanent antivirus for Windows 7/Vista/XP, if you do not already have one.

  More information can be found in the article troubleshooting Firefox problems caused by malware .

  et Check in the Windows Start menu > Control Panel > programs > uninstall a program, uninstall everything related to the above extensions

  and finally remove the User.js filein your firefox profile folder .

  (The user.js file does not exist by default. If you create the file, forget it, otherwise, please note that some programs to create and write in the User.js file also).

  Thank you

• Why Firefox won't work all of a sudden? The reports sent every time...

  For about a week now, I was not able to start Firefox as it crashes every time immediately I try. Reports have been sent automatically every time. I uninstalled and tried to install other versions without success...

  Thank you

  In recent days, we have a lot of crashes with Trusteer report. If you have this program, try to disable it and see if that stops the noise.
  
  You can stop the report by using the Start Menu > programs > Trusteer report > report stop
  
  You can ask their helpdesk when a version update of their products will be available or, if you do not need this software, uninstall.
  
  http://www.Trusteer.com/support/en/report-problem

  Since yesterday, we have a lot of crashes with Roboform. Install the latest version of Roboform 7.6.2 should solve this problem according to the related Bug 691271.

  If you do not report or Roboform, so we have a crash report ID.
  When you send a report of the Mozilla crash puts it right in a gigantic database. We have no way to seek without the ID of the report. I don't know what the problem is without searching the crash report. Please get the ID of your last report of the accident report.
  
  See https://support.mozilla.com/en-US/kb/Firefox%20crashes

• When I try to open my apps my phone just sits there and turns up to me to turn my phone works; I'm tired of having to do this every time I want to start one.  How can I solve this?

  See above.

  So you are saying that you cannot open applications on the phone because it crashes when you try and have power turned off/turned on to get it on again, but still unable to open any application?

  Have what troubleshooting you tried? Troubleshooting of user includes reboot (as you did), restore, restore from backup, restore to factory. Tests after each stage.

  Restart your iPhone, iPad or iPod touch - Apple Support

  Restore your device from an iCloud or iTunes backup - Apple Support

  Use iTunes on your Mac or PC to restore your iPhone, iPad or iPod settings - Apple Support

• Almost every time I shut down my computer, I get an error message from Adobe cef helper.exe.  Should I uninstall and reinstall all Adobe applications?  I have Adobe Acrobat XI and CC Photoshop on my computer?

  I get a message from Adobe cef stop help tool.  I have to click 'OK' to get my machine stopped every time.  Have I not a conflict between Acrobat XI and Photoshop CC.  Can I uninstall and reinstall Photoshop?  Do I need the assistance programme, and if not, how can I remove it?

  Thank you very much.

  Hello

  Please, try the following steps:

  • Uninstall Adobe CC (Creative Cloud help |) Uninstall the creative Office Cloud app)
  • Reboot the computer.
  • Install the latest Adobe Creative cloud version from the link: CC help | Creative cloud desktop

  Kind regards

  Sheena

• Remote Desktop error: the system cannot find the specified file. C:\WINDOWS\system32\ < LANG_NAME > \mstsc.exe.MUI

  Came across an interesting problem this morning. After starting my PC from various applications (OutLook 2002, Management Studio of SQL Server 2008, etc.). I was able to connect to a server by using Remote Desktop (RDP, alias). On trying to connect to a second system, I started getting the following error message:

  The system cannot find the specified file. C:\WINDOWS\system32\\mstsc.exe.MUI

  Will always be connected to the server, I tried to launch a second instance using RDP, but received the same error message.

  I googled the error and found different solutions (the best solution to examine ishttp://social.technet.microsoft.com/Forums/en-US/itproxpsp/thread/164d1e0b-51e6-4201-9dc2-3f4a0ccb14e5), however, none of the solutions seemed to work.

  I tried checking the virus/malware, etc, but nothing was found. I tried to re - load the dll and the exe (s), but still not received the error message.

  The next solution was to try to see what can be changed on my system (new programs, etc.). I noticed there is an update downloaded to my system (C:\Windows\WindowsUpdate.log): AutomaticUpdates content success install successful and Restart required for the following update: update for Windows XP (KB969084)... the update is related to remote desktop.

  I rebooted the system, still not received the RDP error messages. Is I did a complete "install updates and shut down ', and then restarted my system that started working again.

  For the record, here is some information on my system:

  XP Professional: Version 5.1 (Build 2600.xpsp_sp3_gdr.091208 - 2036: Service Pack 3)

  c:\windows\system32\mstsc.exe: 6.1.7600.16385

  I wanted to just post this in case someone else runs into a similar problem...

  Thank you!

  Argue for your limitations and of course they will belong. -Richard Bach, Illusions

  I have a machine with the same problem

  XP Professional: Version 5.1 (Build 2600

  I installed the update for Windows XP (KB969084).

  It does not, but a reboot is required because the system is running on the old dll

  MSTSC.exe works now

  Thanks for the info!

• Receive error message: the system cannot find the specified file. C:\Windows\System32\ < LANG_NAME > \mstsc.exe.MUI when I try to use remote desktop.

  Remote Desktop error

  I use Vista Home Premium.  I used to be able to use the remote desktop connection application, but all of a sudden, it stopped working.  When I try to run it I get this message:
  _________________
  The system cannot find the specified file.

  C:\Windows\System32\\mstsc.exe.MUI
  _________________

  Does anyone have a solution to this problem?  I do not have this file into C:\Windows\System32\en-US\... but perhaps it was corrupted somehow?

  Please help me.  Thanks in advance.

  Hello

  It seems that there are a few system files that have trouble.  One of them being mstsc.exe, I wish you find spyware or infection by the virus first, before you try the next step.  Please see the sticky thread in the security forum.  MVP offers some good advice how to remove these problems.

  http://social.answers.Microsoft.com/forums/en-us/vistasecurity/thread/fa30853d-719a-4265-9e7b-9287567d31e3

  If everything is clean, we will try a repair installation to replace the problem files and also to ensure that other system files are good.

  The 'repair' installation (upgrade on-site) will not affect your installed programs or data.  Just make sure that you are already connected to your computer when you start the installation.  Do not boot from the DVD.

  If the installation does not start automatically when you insert the DVD, run setup.exe from your DVD player.

  • When the Setup program starts and the install now screen, click install now.
  • Note When you receive the important Get updates for installation message, click go online.
  • Click upgrade when the which type of installation you want? appears

  Please let us know if this solves the problem for you.

  Brent
  Microsoft Answers Support Engineer
  Visit our Microsoft answers feedback Forum and let us know what you think.

• The system cannot find the specified file. C:\WINDOWS\system32\ < LANG_NAME > \mstsc.exe.MUI

  Hello

  I get the following message appears when I try to start a remote desktop connection (the shortcut target is % windir%\system32\mstsc.exe).

  This used up until one of my pc, including all upgrades of Windows reinstalled.

  It is on a Windows 7 pc with all the service packs and updates.

  The system cannot find the specified file. C:\WINDOWS\system32\\mstsc.exe.MUI

  I have a Dutch version of Windows. The mstsc.exe.MUI file is available in C:\Windows\System32\nl-NL

  It was not available in C:\Windows\System32\nl, but after that I copied it on I still get the same message.

  I even copied the entire content of the... \nl_NL folder in the... weather folder and still no luck.

  Isearched the internet for more solutions but nothing has solved the problem.

  Thank you

  John-Pierre

  OK problem solved.

  I ran the scan of the updated and all updates already installed.

  I checked the list of updates installed and already had KB2592687, KB2574819 installed.

  However, when I looked under installed updates, it showed KB2592687 and 3 others in English while I have a Dutch version of Windows.

  

  So I decided to uninstall the updates English 3 so I could reinstall it again.

  "Note that after uninstalling these 3, Remote Desktop already worked again.

  Apparently, these 3 uninstalling uninstalled a lot more, because after a reboot, there were 10 updates available instead of only 3 that I uninstalled). And after installing them and another restart there was even more updates available. Overall, it took three update sessions and restarts all up-to-date again.

  Although the list of installed updates again 3 updates in English, Remote Desktop works now. So obviously something has went wrong with one of the previous sessions of Windows Update.

• My 2000 wireless optical mouse scroll wheel works intermittently-"mouse sigal is low."

  Original title: my 2000 optical wireless mouse scroll wheel works intermittently

  I recently bought a set of wireless with an optical mouse wireless 2000, office 100 wireless keyboard and a wireless desktop kit 3.1 receiver. After you have installed the drivers and the Intellitype/point than roulette software of the mouse does not work all the time, for example after clicking on my way in a 80 page PDF manual and long Web page that the wheel seems to not work in one direction, then the other way won't work. I tried new batteries, latest driver bouquet of microsoft site (intellipoint 8.01) moving to the receiver or away to "signal low mouse." Today, however, the mouse is 2-3 feet away from the receiver and it keeps popping up saying ' the mouse sigal is low you want to start the troubleshooter? Yes, I tried this and tried to move the USB without success. Can someone HELP please... Tired of drag and drop

  Same problem here, but I found a way to make this work (in fact there are two ways LOL)

  -Remove one of the batteries.  Believe it or not, the scroll wheel works perfectly when I remove one of the battery (any).  However, I do not know how long it will last since there isn't that one battery in operation.

  OR

  -Remove the lid of dough and remove the batteries.  Use a screwdriver to loosen the screw about 2 rounds (for some reason, I think that it is screwed in too tight).  Replace the batteries and you are or that you set.

  I can't guarantee that my methods will still work, but the fact is that it works for me since then.

• Peripheral USB works intermittently on XP computer at startup. the Office of other problems, why?

  There are three 7 port usb hubs in a string, (all connected each), first of all, one from the computer, more a fourth with four ports connected to a Dell usb keyboard, which itself is connected to one of the hub 7 ports.

  Sometimes the lights mounted on all four centers, but it's a matter of holding your breath until he died which means the devices connected to them also does not work.

  Only one connected in the light of the computer is turned on, but even in this case, devices attached (like a usb keyboard), does not always work. They are all 2.0 but the computer is 1.0 I believe.

  On the desktop, they usually receive regular work but the desktop freezes, BSOD and endless error messages, especially during video playback or attempt to use the webcam in reports.

  Discovered today that you must enable USB in the bios. So far, who has worked, which means that there is no error reports or BSOD, nagging but the computer has not been extinguished at all since finding this out is the answer or is this something else?

  * There is another PS/2 keyboard and a mouse that is always attached now especially when you use a CD, (like XP). have to use the boot CD 'aid' like Acronis or having to access something in the bios, these devices are the only things that work like computer starts.* *.

  * Haven't had no idea where to put this, but the defalult was, "Performance and Maintenance", which I don't have on my computer so I just guess he's right.

  Thank you, but do not want to touch the registry.

  Never did not understand why he has often given it as a resolution, knowing he could totally botch a computer novice would have no idea how to solve this problem. His pan to the fire.

  Anyway thank you all for having tried to prevent him from thinking that the problem is resolved.

  It seems to enable USB in BIOS, it set as the hubs knitting every time and no. become as much error messages.

  Takes some time in the BIOS, but it is nowhere as long as it was and now the ps/2 keyboard and mouse connected helps again.

  Tried using usb ps2 adaptors but they were next useless.

  Too bad, if they had worked, probably would not need other HID devices as backup :/

• How can I connect my computer to my office remotely using mstsc.exe? (win xp pro sp3)

  How can I connect my computer to my office remotely using mstsc.exe? When I try the public ip address to our office, I just get the server computer, but I want Office away from my workstation?

  Hello

  You may have to contact the system admin of your workstation as they have disabled the remote access.

  However, you can consult this article for more information.
  http://www.Microsoft.com/resources/documentation/Windows/XP/all/proddocs/en-us/ts_cmd_mstsc.mspx?mfr=true

• Subinacl.exe working correctly in windows 7 64 bit?

  I read tha windows resource kit 2003 are not supported in 64-bit environments, and I want to use subinacl.exe to change permissions of registriy. Is it possible to use it without problem?

  If the answer is no. Could you recommend me any other utility that change registry permissions in windows 7 64 bit?

  Thank you

  Hello

  According to my knowledge Subinacl. Exe works on Windows 7 (64-bit) as well.
  a. download subinacl.msi from following link and save it to the desktop.
  http://www.Microsoft.com/downloads/details.aspx?FamilyId=e8ba3e56-d8fe-4A91-93Cf-ed6985e3927b&displaylang=en#AffinityDownloads
  b. on the desktop, double-click subinacl.msi to install the tool.

  To learn more about subinacl follow the given article (given article is for the updates of Windows XP, but remains still valid for Windows Vista and Windows 7).
  http://support.Microsoft.com/kb/968003

• Is there a way I can configure MSTSC.exe to connect to an RDP but then require a password to return or to terminate the connection?

  I have implemented a set of instances of the virtual machine on the certification exams.  They have limited internet and program access.  To achieve these machines, we use MSTSC.exe or RDP another access type.  The problem is that people can only minimize MSTSC and go to their House Office to access the internet or anything else really.  It is a major security breach for cheating.  I need a way to connect to my secured through RDP still test environment restrict access to their own desktop!  The challenge that I know, but everyone has been able to configure MSTSC or any other RDP program to require a password or minimize the output?  Other solutions are of course welcome, thank you.

  Hello

  You try to view your feed in these links for assitance:

  http://social.technet.Microsoft.com/forums/en-us/w7itprovirt/threads

  http://social.technet.Microsoft.com/forums/en-us/category/w7itpro

  It will be useful.

• Adobe creative cloud.exe works like

  Adobe creative cloud.exe works like. So impossible to maintain my software unless that Adobe do it himself without that I ask. I am more aware of the availability of the available SHIFT required for ! And it's been weeks now!

  I specific as it is not the privilege of the bureau which is charged but rather the file. EXE

  Do working robots instead of man is already open to criticism, but when they are unable to remedy our woes, it becomes frankly tedious.

  A big thank you to the one who out me of here. P

  English:

  Adobe creative cloud.exe no longer works. It is therefore impossible to maintain my software, unless Adobe do it himself without my request. I am is more informed of the availability of the stock of SHIFT! And it's been weeks now!

  I said that's not binding is offending but the. EXE file

  To use robots to human upwards, already critical, but when they are unable to overcome our disappointments, it becomes downright painful.

  A big thank you to the person who pulled out me of there. P

  Without information system and other technical details no one can tell you anything.

  Mylenium

• DVD player works intermittently for movies.

  I work with a few volunteers at the forum of videos to try to get the DVD movies to play, play smoothly and have all the functions (scene selection, special features, etc.) work.

  We could make only occurring on some films, others would either play all, play that once in awhile and when they made the video was "choppy" but the audio smoothly.

  The conclusion was that I have a problem with the hardware with the optical drive.

  Any suggestions for an auto repair?

  If this is not the case, repair, suggestions for the good and cheap to replace the optical drive and a source to get it?

  Computer: HP Pavilion dv7 Notebook PC, FS126UA #ABA
  Operating system: Microsoft Windows Vista 6.0, S.P. 2, 64-bit
  Optical drive: TSScorp CDDVDW TS-L633L, FW revision 0400

  Thank you!

  Broodstock

  Found a solution! I found this: http://support.microsoft.com/kb/939052 and follow-up directions to make sure volume existed on and Media Player off the coast and the two films (John Wayne!) that would not play, played without a hitch. I then put back them in to make sure I had a good fix and neither would play... In frustration, I've blown on and in the optical drive open, put the dvd back and they played every time. I got out another dozen DVD and tried and they all play perfectly. I guess that cleaning, it would have been my first effort: o) is there available optical drive cleaning discs, or is there an accepted method of cleaning the drive?