MSVCP11O.dll absent from my computer after updates

Similar Questions

• BsSDK.dll absent from the computer, windows 8

  I just bought a new computer (HP desktop with windows 8) and made all necessary downloads, etc. The problem I have, is that when first I turn on my computer and go in any program, such as my e-mail etc, I get this error message in a small window that appears on the screen, with the title: BtTray.exe - system error. This message has a red circle with an X, white in the middle and States: the program cannot start because BsSDK.dll is missing on your computer. Try reinstalling the program to fix this problem. In the lower right corner of this window, there is a [OK] tab. Before I click on this tab the my choice (e-mail, etc.) appears without a problem. I click on the tab anyway, and disappears from the window of a small error message. It appears never again, until I have restart my computer (after having turned off) and go to my email or another program.

  P.S. I'm new to computers and come from the era antique typewriter. So I'm not too familiar with the computer language, still. I have spent in my browser and typed in BsSDK.dll download... Long story short. I want to make sure that I get a download of good reputation. Is there a microsoft link that would have this, while I meet future problems... Thanks for any help in this matter. M.

  Hello

  1. are you able to connect to Bluetooth on this PC devices?

  2. did you face this problem from the moment that you bought this PC or after making a few changes to the computer?

  BTTray.exe is for Bluetooth products tray bar process. It gives you easy access to the configurations and settings for the Bluetooth products. It is not an essential process, but is necessary for the proper functioning of the program.

  Follow these methods

  Method 1: First of all, I suggest to perform a clean boot and check to see if a third-party software is causing this issue.

  To help solve the problems, you can start Windows by using a minimal set of drivers and startup programs. This type of boot is known as a "clean boot". A clean boot helps eliminate software conflicts.

  How to troubleshoot a problem by performing a clean boot in Windows 8

  http://support.Microsoft.com/kb/929135
  Please note:  After troubleshooting, be sure to put the computer to a normal startup mode.

  Method 2: Scan the file system (CFS) auditor. Follow these steps:

  (a) start the desktop view.

  (b) open the command prompt, right-click in the left corner when the window appears, and select prompt (admin).

  (c) type the following command and press ENTER:

  sfc/scannow

  The sfc/scannow command analyzes all protected system files and replaces incorrect versions with appropriate Microsoft versions.

  Method 3: You can also try reinstalling the HP Bluetooth software and check.  Follow these steps.

  a. press the Windows key + Q, type Control Panel , and then click uninstall a program in the list programs.

  b. scroll down until you see the Bluetooth software and uninstall.

  c. now press the Windows key + R, type Device Manager and press OK.

  d. expand the Bluetooth option, then right-click on the Bluetooth device listed. Select Update driver software"

  Click search automatically for updated driver.  Windows will search online for the correct Bluetooth drivers compatible with your device.  Once it's done, reboot your system.

  Follow the steps and let us know the results.   If you have any other questions, please post, we will be happy to help you.

• Beats Audio Control Panel has been removed from my PC after update audio driver.

  Pavilion dv7-6052er (Windows 7 x 64). Beats Audio Control Panel has been removed from my PC after update audio driver.
  Tried to reinstall manually with 6.10.6345.0 version (http://ftp.hp.com/pub/softpaq/sp55001-55500/sp55094.exe) and another randomly chosen by some. Nothing has worked.
  My actions:
  1. remove the driver and its software.
  2 restart the computer.
  3 Windows Installer some driver after reboot (I can't disable or cancel installation)
  4 reinstall the driver.
  5 restart my computer.
  Just after the start of Windows driver trying to implement something else (or to continue installation), but it causes an error: _Error: Error = error Undefined...
  Tried to do without step 2 - to reinstall the driver right after having been deleted - without success.
  Tried to remove the driver and then restore an old via Recovery Manager - Beats audio control panel is displayed but there is no sound at all!
  I think I tried all possible combinations of actions. Beats Audio Control Panel works without noise and noise without BACP. But never together.
  Please help me with some advice. Thank you.

  Hey guys! Tried once more to remove the driver and install it with the Recovery Manager. Don't know how, but this time it worked.

  In fact I've disappointed with HP updates, won't be tester for you. I'm tired of these bugs after updates (utility Cool sense, Beats Audio etc.).

  Turn off automatic updates on my PC, seems I don't need your "improvements".

• I use the trial version of CS5 version, two years ago. I was deleted from my computer after using the program. Now, once again I want to install a trial version of CS5 on my computer. I want to improve my program information. That copyright law is there a

  I use the trial version of CS5 version, two years ago. I was deleted from my computer after using the program. Now, once again I want to install a trial version of CS5 on my computer. I want to improve my program information. That copyright law are there downsides to the wonder of Adobe?

  Hello

  Please Download CS5 products

  But you can only use it as a trial for a limited time unless you do not provide a serial number to activate the product.

  Kind regards

  Sheena

• My WLAN disappeared from my computer after the awakening of the Mode Stand

  Original title: My WLAN as disappeared from my computer

  I had my computer on stand mode and when I took it out of stand by the WLAN is not all I turned and on the network adapter switch on the front of my laptop and it dosent do anything it dosent even say disabled or not when I went to my device manager , the adapter is not here yet most everything there is to connect to the local network. It is as if the WIFI network is gone I went Web site and tried to reinstall the driver and it dosent do anything. my computer also doesn't let me in the HP wireless assistant. I am enough out of options I am able to get some conection by plugging the power cord on my computer but I'd like to get this problem taken care of. Help, please

  Hello

  You may have a hardware problem with the WiFi card.

  Try a system restore before it happened.

  How to make a Vista system restore
  http://www.Vistax64.com/tutorials/76905-System-Restore-how.html
  -------------------------------------

  You may need help in a real store of the computer (not the leeks and peaks at BestBuy or other BigBox
  stores) or HP support.

  Also check with HP support and forums.

  HP support
  http://welcome.HP.com/country/us/en/support.html

  Contact HP
  http://welcome.HP.com/country/us/en/contact_us.html

  HP forums
  http://h30434.www3.HP.com/PSG/

  I hope this helps.
  Rob - bicycle - Mark Twain said it is good.

• Problem of blackBerry Smartphones from the homescreen after update

  I've updated my device software. After update when two or more new messages appear on the home screen, I see only the first line of messages. I write a mention to @BlackBerryHelp but nobody don't answer my tweet, so I tried to send a direct message, but it's impossible because I can send direct message to my followers. I add a screen grab to my tweet, also I add Marmotta here (bottom).

  the current version is 6.0 Bundle 2949

  

  Have you tried a battery pull?  Can you delete or mark them as read and see what is happening on your next series of messages?

• I can't add images to my site from my computer after that I added it to Adobe

  HELP PLEASE!

  Hi Alex,

  I'm sorry but I'm not clear on what you're asking. You say that you can not download revel from your computer? I don't see a Revel account associated with the email you use to this forum - you have a problem with another Adobe product?

  I apologize, but I need a little more information so I can try to help.

  Glenyse

• After update today no response from the computer after restart on June 6, 2009

  Hello. I just, I was wondering if someone who has updated XP today is having the same problems. I have updated the automatic updater and restarted as requested. The box came but no response no matter what, as if the hd was fried. All my fans turn on but nothing on the screen my DVD players don't openand even as the lights of the habit of my keyboard lights still. Any idea would be useful.

  Try unplugging al computer, power, cable make sure ther is not a CD or a DVD inserted and try again.
  If you get nothing on the screen is it possible that you're computer has hardware problems.
  Simply plug the necessary input devices and the power to run the diagnostic tests. (mouse, keyboard, scree)
  I wouuld also suggest to perform a complete diagnosis of a bootable CD.
  Your computer has an integrated video card? If you have an external disconnect and add plug the monitor cable onboard video card.

  Thank you

  Martin
  Microsoft Answers Support Engineer
  Visit our Microsoft answers feedback Forum and let us know what you think

• Lost all sound from my computer after the updates

  Driver Audio original was ahead AC 97 Audio for VIA (R) audio controller.  During updates, this changed to C-Media AC 97 Audio Device. Now I have no sound.  When I check in the properties for C-Media I get the message "this device cannot start [Code 10] any ideas how to get back my sound."  Thank you

  If you still get the wrong driver of WU on your sound card, hide the update.

  You go to the website of the manufacturer (sound card) and get drivers.

  TaurArian [MVP] 07/01/2005-30/06/2011. The information has been provided * being * with no guarantee or warranty. What works for some, may not always work for others.

• P7-1299cb: no sound for desktop computer after update to windows 10

  I have a desktop computer that used to run windows 7 and finally decided to upgrade to windows 10.  Update had no problems, but I have no sound.  I tried to update the driver through windows update and HP support assistant, both did not acknowledge the problem

  Windows update, I get the following message: IDT - Audio Device - IDT High Definition Audio CODEC - error 0x8007001f

  Please any advice would be appreciated.

  Thank you

  Hello:

  The page sheet product indicates that your PC came with W7 64 bit.

  I can tell you that there is no audio driver W10 32 bit.

  If you have inadvertently posted the wrong bit version, see if this W10 64-bit IDT audio driver works...

  This package provides the Tempo IDT High Definition Audio Driver for assumption of office models that are running a supported operating system.

  File name: sp71717.exe

  Otherwise, there is a workaround solution that you can try to get at least the noise at work...

  Go to Device Manager and click to expand the category of audio, video and game controllers device.

  1. Select IDT High Definition Audio CODEC under this category.

  2. Select the driver tab.

  3. click on Update Driver... button.

  4-> select Browse my computer for driver software.

  5. Select-> Let pick me from a list of drivers for devices on my computer.

  6. Select Audio device high definition (not IDT high def...)  "This is important). and click Next.

  A warning message may appear, but click Yes.

  7 Windows has updated your driver software.

  8 restart the PC.

  The key is step 6.

• Microsoft Security Essentials icon, absent from the taskbar after restarting Windows XP

  original title: lack of Windows XP icons after restart

  After that I restarted my antivirus, Microsoft Security Essentials icon is missing from the taskbar. It also happened when I have ESET NOD32 installed. When I disable the SSDP Discovery Service, in the section of the Admin, it will appear. But when I go back and set it to automatic, it will still be absent.

  For all that is you probably not need to have running SSDP Discovery Service, for security reasons almost always disable this service on any system that I put in place.

  John

• X200T not boot from any device after updating the Bios v3.00

  Hello

  I recently updated my bios to the latest version, the v3.00 X200T and now it does not start from any device - everything I get a blank screen after the initial bios starts upward.

  The bios seems functional and it recognizes all the devices I attached, as well as the internal hard drive. However no matter how to start the machine it does not start. I tried to set the boot order in the bios, using F12, F11 for recovery, remove the internal HARD disk, used all the USB ports, etc... -all I get is a blank screen after the initial splash screen.

  No beeps to indicate any problems, and I tried to reset the default settings of the bios, remove battery & power - all to nothing does not.

  Any ideas?

  I updated the bios of many laptops and desktop computers in the past, but this is a new one on me...

  I hope someone can help.

  Darren

  It seems that it also happens to X 200 owners who upgrade to version 3.01 of the Bios.

  mc2sgp has posted a response in this forum that worked for me:

  "I have the same problem and found the way to a temporary solution."  Go into the BIOS (you should always be able to press F1 to go into the BIOS) and go to Config-> CPU Intel VT - d characteristic of-> and disable it.  You should now be able to start normally in your operating system. "

  At least, I can now start my camera.

  Hope this helps others.

  Darren

  ADMIN edit: tagging this post as the solution to guide others to the bypass.  Lenovo will remove the BIOS on the web and replace it with an updated version that resolves these symptoms as quickly as possible.

• Windows 7 - bad computer after updates performance

  Is something wrong with the 15 updates installed today.  My pc went from an A - kicker a 386

  Keep an eye on this page: http://www.officeforlawyers.com/outlook/tips/2412171.html

  It seems that MS has released KB2412171 and can be re-release soon.

  ~ Robear Dyer (PA Bear) ~ MS MVP (that is to say, mail, security, Windows & Update Services) since 2002 ~ WARNING: MS MVPs represent or work for Microsoft

• XceedZip.dll absent from Pastel xpress 2009 Win 7. Double heart

  Accounting package will not save XceedZip.dll not crrectly recorded, is missing or one of its dependencies

  Hi Rick Jowett,

  1. when exactly you get the error message?
  2. don't you make changes to the computer before the show?

  I suggest you to contact the seller of software for better support.
  http://www.pastel.co.za/pastel-accounting-software-support-upgrades.asp

• Can double-click is no longer on a virtual computer after update to Win 8.1 (on the Mac host)

  Hello

  We have VMWare Fusion Version 5.0.3 (1040386) running on a Mac Book Pro (Mountain Lion) with a Windows 8 VM, updated week last through the App Store to 8.1

  We have this problem on all our machines:

  1 open Windows Explorer, navigate to any 'virtual' folder (ie. a folder which is actually pointing to a folder on the Mac, for example My Documents).

  
  2. you can see everything, but you can't do anything with it. For example, double-click a file to open it and the application (for example, Notepad, Excel, whatever) does not start. The workaround, it is that you have to go to the physical folder on the Mac and open the file, then it will open the appropriate application of the virtual machine (and the file opens in the application). On VM Win8, it wasn't necessary, it has worked well for the virtual machine.

  3. you double-click any subfolder to open it either, you can never see the top level of the virtual machine.

  It seems that the behaviour of 'double click' is broken.

  Any ideas?

  Thank you
  

  OK, the solution to this problem is not double click, but sharing folders. VMware tools needs to be completely ONE installed, restart the virtual machine, and then reinstall the VMware tools.

  I also had to change the registry settings in Windows for VMWare tools first, because otherwise it could not be uninstalled.

  The steps to edit the registry are in this thread, the Zypher response:

  https://communities.VMware.com/thread/460232

  Changes to the registry, then select Virtual Machine in Fusion, the menu reinstall. This will cause the Tools CD-ROM mounted in the virtual machine (Windows 8.1 in my case). Ignore the guests that appear and instead, open Control Panel and choose to uninstall VMWare Tools. You must restart the virtual machine later. After the reboot, new Virtual Machine in Fusion menu goto and now select "install VMware Tools". You will need to logoff the VM at the end and reconnect again.