Multi-site architecture view
Hi, I was wondering if it is possible to deploy architecture view multi-site 5.0 with one instance of vCenter and View Composer.
I enclose a jpg with the diagram.
Thanks in advance!
Pablo. -.
You make very valid points, but I just check our Guide to planning and Architecture on this and we do not specify "in scenarios where a view deployment must cover data centers, create a separate view deployment for each data center." Since the deployment of the view includes vCentert, it really doesn't mean a complete split.
Power management and cloning would clearly fail in site B while the link is down, and so we really couldn't recommend/support/support it.
This came from page 43 here http://pubs.vmware.com/view-50/topic/com.vmware.ICbase/PDF/view-50-architecture-planning.pdf
Select this option.
Tags: VMware
Similar Questions
-
Is it possible to insert a bookmark of the multi site? For example, a click opens 8 sites/tabs. If so, how is this installer?
To avoid confusion: http://kb.mozillazine.org/JavaScript_is_not_Java
{Ctrl + click} works like the Middle-click.
-
How to download an entire Web site to view offline?
Hello everyone, good evening.
Anyone know how I can download a set of the online site to view offline?
Thank you!
It will do the trick.
-
Greetings,
I practice implementation of VPN and it seems to have fallen on a small issue that solution eludes me. Everything works in my current topology with the exception of a multi-site vpn. I have 3 ASA, which is outside the interface is connected via a switch. The inside interface is connected to a local area network that contains a workstation on each subnet. I'm trying to set up a solution where I can have all 3 ASA related between them via a VPN. The question I have is when I raise a single tunnel, scathing from a workstation behind the ASA, I can't set up a second tunnel scathing from a different network. To explain that better, here is an explanation:
ASA #1
outdoors: 10.0.1.1/24
inside: 192.168.0.1/24
workstation: 192.168.0.100
ASA #2
outside: 10.0.1.2/24
inside: 192.168.1.1/24
workstation: 192.168.1.100
ASA #3
outside: 10.0.1.3/24
inside: 192.168.2.1/24
workstation: 192.168.2.100
If I ping 192.168.0.100 192.168.1.100, the tunnel opens very well and I get answers. If I can try and ping 192.168.0.100 192.168.2.100, does not open the tunnel to 192.168.2.0. If I clear all its on ASA #1 and then ping 192.168.0.100 192.168.2.100, the tunnel opens very well and I get a response. Then I try and ping 192.168.0.100 192.168.1.100 and the same thing happens, no tunnel and no response. When I enabled logging on ASA #1 seems that it sends the ping for the different network on the tunnel open instead of opening a new tunnel to the correct network. Can someone tell me what is happening here and if I just missed something simple with routing? Or is it maybe a problem with VPN?
Craig,
You have default route badly configured on all the ASA. Here's what you have configured
ASA1
Route outside 0.0.0.0 0.0.0.0 192.168.0.1 1
It's sendning the package for outside inside IP address. Here's what you need to do on the ASA
ASA1
No route outside 0.0.0.0 0.0.0.0 192.168.0.1 1
Route outside 0.0.0.0 0.0.0.0 10.0.1.2
ASA2
No route outside 0.0.0.0 0.0.0.0 192.168.1.1 1
Route outside 0.0.0.0 0.0.0.0 10.0.1.1
ASA3
No route outside 0.0.0.0 0.0.0.0 192.168.2.1 1
Route outside 0.0.0.0 0.0.0.0 10.0.1.1
Also delete icmp access list crypto that you allowed to what IP is the same access list. IP covers both the ICMP.
Kindly let me know change default allows traffic.
Kind regards
Bad Boy
P.S. Please mark this message as 'Responded' If you find this information useful so that it brings goodness to other users of the community
-
Question about C60 multi-Site Management
Dear Expert
I have a question about C60 multi-Site call using C60 as host.
It there is a choice of layout as Edge 95?
My opinion of close end site is not in the page layout and I go through a document to the administrator, apparently not metion on selection of layout on several sites.
C60 is capable of having a provision such as "4-split' 95 edge?
Thank you
Best regards
Tung
Current version of the software of C60 TC6.0:
You can also make your own layouts using the TC Console:
http://developer.Cisco.com/Web/Telepresence-developer/tools/integrators/TC-console
/Jens
-
Codec migration option multi-site since VCSC to CUCM system key
I have some general questions about this scenario
If a Codec has multi-site option key and entered a VCSC and is migrated to a CUCM system saved:
A.) multi-site option button will still be available for use on the Codec?
(B) can plan for TMS to it, and no need of a conductor based GST to serve the meeting?
You don't mention what version of endpoint and software, however, the endpoint can use the Multisite option even after it has migrated to CUCM, see sx20-cucm for reference.
Endpoint can also be using TMS planning conferences that are hosted on microcontroller embedded in endpoint as long that you have added in TMS, please refer to Guides Admin TMS on how to add endpoints CUCM managed in TMS.
-
What is the Kingdom of multi site profile
Hi all
What is an average of Kingdom to ATG? What is the role of the Kingdom in Multi site profile? I went through the docs of the ATG, but I was not able to understand the exact meaning.
A profile can be associated with a site using profile Kingdom. that means him.
Thank you
TT
Trade Oracle ATG Web - profile realms, it looks like realms of profile allow you to have a single account for multiple sites or allow you to have an account for a group of sites, but not another.
For example, if you have 3 sites (electronic website, clothing and kitchen utensils Site), you can create a profile named welcome the Kingdom of goods Kingdom that has electronic Site and kitchen utensils and a Kingdom called Kingdom of clothes clothing Site containing profile. If a user creates an account on the website, the account will allow you to connect on the Site of kitchen utensils, but not the Site of clothing because the site of kitchenware is in the same domain and clothing is not. To connect on clothing, you need to create an account on a site in this area.
Thank you
Joe
-
Site Web displays well in IE. 7. I use FF 5.0 on this computer.
It is a document of MS Office with code VML and non valid HTML code.
IE can only view these documents.Make sure that you disable the VML code and save the page as HTML code instead of as an Office document.
-
Upgrade VCSA 6.0 6.0 Update 1: Multi site command?
Hi all
I have a site deployment 6.0 multi with stretched SSO and wonder in what order I should be upgraded to the VCSAs in?
Production Site:
VCSA as external PSC with postgres
VCSA as vCenter
Recovery site:
VCSA as external PSC with postgres
VCSA as vCenter
Pass both sides then the VCs? Or should I do 1 site at a time?
Thank you
Girardot
I got a response from William Lam via the virtuallyGhetto forum
"Yes, or you can just update a single site (since the PSC are backward compat) and get the two PSC/VC, updated before moving on. Two options could work, as long as you update the PSC before the VC upgrade"
I hope this will help others.
See you soon,.
Girardot
-
How does the option of multi site
I realize that Muse is not true "adapted" and you need to create a version for each platform, so how this work?
Lets say I created a desktop, Tablet, and the mobile version of my site. How to publish the project so that all three versions are active and how he treats people visiting the site on these platforms. Typo www.acme.com via mobile phone, for example, will take me to the correct version or is at - it a transmission, a code injection should be done to take the visitor to the correct site or are the three versions actually three completely separate versions?
Hi Christian,
Versions for desktop, phone and Tablet for a single site will be in the same file of muse. So, if the site will be accessible on any device, it will be automatically identified and appropriate version will be displayed.
Is attached a screenshot of the plan view to add the phone and tablet on the site.
Kind regards
Neha
-
Site Web Viewer question - buttons within WHO
I have not seen this as a problem "known", but I think it could be a common. Buttons in multi-state objects are not displayed when you use the web viewer. It does not seem there are a lot of States or buttons that trigger the issue.
The question as I was creating a custom menu in a section to browse the pages.
Steps to reproduce the bug:
1 create a multi-state 2-State on page 1 of a folio
2 al ' State 1 or 2, create a button 'navto' to the next page of the current article.
3 send page, publish account with 'sharing' is enabled.
4. notice of publication with web viewer using the latest browsers Chrome and Safari for Mac.
Results: MSO buttons not displayed on the latest browsers Chrome and Safari for Mac.
Expected results: MSO on-screen buttons and function.
Hello
I am one of the engineers responsible for the Web Viewer. In the last days, we have provided an update to the Web Viewer that should solve the problem you describe.
Could you please you try to display the article once again, see you if the problem has been resolved?
If she was not, could you send the link to the article in a reply or send me a direct message, so we can diagnose what is happening?
Thank you.
-
During extraction from multi org data views from Super user responsibility
We have a report of accounts receivable custom in our instance of R12 (version: 12.1.3;) RDBMS: 11.2.0.3.0).
We have created several operating units and corresponding claims responsibility. There is also a responsibility of super user of receivables. The query in my report uses the display:. ar_cash_receipts_v I pass an optional parameter ORG_ID (using the value FND_MO_OU), get the data of the respective ORGANIZATIONAL unit.
Since this is a multi org reviews, it doesn't work (data gives) when only a corresponding profile option for this ORGANIZATIONAL unit is set. To test the query, I checked this using mo_global. SET_POLICY_CONTEXT API. But in super user, we have to get the data for all the organizational units that are attached to it when I pass null to the ORG_ID parameter. However, the view is unable to provide data in this case. (even if an ALL_OU profile can be found in this case.)
Please suggest a /strategy of the workaround appropriate for use in general with this type of views. Any help will be appreciated.Look at
>
mo_global.set_policy_context (the of ',)-single unit operation
mo_global.init () - multi control unit Of
Re: How to extract data for all organization units
When to use MO_GLOBAL. INIT and MO_GLOBAL. SET_POLICY_CONTEXT.Published by: Alexandr on June 27, 2012 02:52
-
help a single master more editable site materialized views
Hello world
I have a solution in which I have 5 sites.
I decided to implement a single site of master with 4 updatable materialized view sites.
The reason why I made this decision, it's I want that if my main site does not work, the materialized view sites don't update with other data.
My question is in this situation if the main site became unavailable can be update view materialized sites update their own individually and after master site data become available, they send their data to that or not, they can query just to their own database until the main site are available?
Thank youHello
Yes, what you think is correct. Mviews update can run locally even if the primary site is unavailable. She can push further data on the master site when the main site is available.
The mviews update can be updated even if the primary site is unavailable. But the changes that happened on the site controller is not updated until it becomes available and an update is performed.
Thank you
Florent -
Unable to connect to the Web by HTTP site after viewing once it with HTTPS.
If I find a site with SSL (https). If later, I need to use it without ssl (http protocol) I can't, I am forced to use https. If you must know why it's necessary, it's because a Web site "https://example.com" ssl certificates configured properly, then that another site which is a subdomain "http://mysubdomain.example.com" didn't put certificates in place because it is hosted elsewhere. So when I try to connect to "mysubdomain.example.com" firefox forces me to use the https protocol, how the site does not load because it cannot offer me a page SSL version. The only solution I found is to delete all the temporary data of my browser and restart the browser. How I can use "http://mysubdomain.example.com", but if I ever go to "httpS://example.com", I can use only the subdomain because I am again forced to use the httpS Protocol.
Is it possible I can stop this behavior?It works for me.
https://addons.Mozilla.org/en-us/Firefox/addon/enforce-encryption/ -
When I try to see the construction of the new Hoover Dam bypass bridge, to do this, you must click the icon (while holding down the CTRL key) on the camera to the site to raise the camera. This will not work with my latest version of Firefox, but I can do this with Microsoft Windows Explorer 8.
This has happened
Each time Firefox opened
Is once installed Firefox recently
Works for me on Firefox 3.6.6 - hold CTRL and click the Web Cam on the left side of this page - http://www.hooverdambypass.org/ - then hold down the Ctrl key and click the link click here in the pop-up window.
It crashed Firefox once for me, but after that I have re-opened Firefox it worked fine for 5 minutes that I tried the pan control and saw the cameras the Nevada and Arizona. No Java perspective worked for me also.
Maybe you are looking for
-
Availability Tecra R940-S9440 for the France
Hello I'm trying to find out if the R940 Tecra-S9440 (HD + screen) will be available for the FranceI wasn't able to get information from the commercial services of Toshiba in France.Who should I contact? R940 with screen HD + is available on the Tosh
-
Satellite A500 - 19 X - which is the maximum supported RAM?
Hello I have a Toshiba Satellite A500 - 19 X with Windows 7 64 bit Home Premium edition. It came with 4 GB DDR3 1066 MHZ RAM. Can anyone let me know the maximum supported RAM for this hardware configuration and OS. Kind regardsVivek
-
Low graphics performance after the setting of the default BIOS satellite L30 - 10W
Hello!In a first time - im not English so my language is wrong.Half a year ago and windows vista showed 3.8 also efficient graphics card, I bought Toshiba L30 - 10W. Then, I played without any problems on windows xp (call of duty 2, flatout 2, fifa 0
-
I followed all the directions to Norton Support staff, but windows won't let me access the 'C:\Users\Chris>chkdsk. My machine is slow and several companies have informed me serious problems. (In the black box) of "Start - Search says chkdsk " acces
-
Problems with wireless USB adapter. Icon missing "Wireless network connection".
I recently got a laptop HD malfunction cause me to start my PC from 2004. I bought a Belkin N150 Wireless USB adapter to connect to the internet connectivity. During the installation, I do not get a "Wireless network connection" icon I am running Win