MultiCam playback freezes

Similar Questions

• Video playback freezes after upgrade to Windows XP SP3

  Since your update to service pack 3 my look on Internet Explorer the TV started to freeze every few seconds, can you tell me why this is happening now. It was perfect before. Thank you

  My operating system is windows XP. My video card is NVIDIA

  Hello

  · What version of Internet Explore on the computer?

  · This happens when plying the video on a particular Web site?

  You can download and install the latest version of adobe flash player on your computer and check if it helps.

  Uninstall the previous version of Adobe. Link for reference: Uninstall Flash Player | Windows: http://kb2.adobe.com/cps/141/tn_14157.html

  Install the latest version from the following link: Adobe Flash Player Support Center: http://www.adobe.com/support/flashplayer/downloads.html

• Video playback freezes

  Problems of video stream

  I use the Windows XP operating system and have recently loaded the optimized Internet Explorer 8.  Since I updated to IE8 video feed of web pages such as CNN or other professional site webinars play for about 3 seconds, then freezes for about 5 seconds.  I tried to reload IE8.

  Hello

  Step 1: The video might be buffering. Wait until the video is 100% buffered, then check what is happening.

  Step 2: If you are still having the same problem then, uninstall and reinstall flash player.

  Reference:
  Uninstall Flash Player | Windows
  http://kb2.Adobe.com/CPS/141/tn_14157.html
  http://get.Adobe.com/flashplayer/

• BluRay playback freezes read and Stop or proximity reader

  For many months, that I was not able to play bluray without it my system freezing usually about 5 minutes after the film began, and then after a restart of the computer it plays OK until the end and then freezes again when I stop the movie. I tried all methods to try to stop the movie again using Task Manager and close the exe file. It freezes again. The rest of the features of the disc is very good and I play the DVD without problem.

  I was using Power DVD 10. CyberLink support seem to have no idea of what is wrong after several months of back a suite. Today, I tried WINVD 11 and had the same problem with demand to stop/close. However, the movie played OK until the end.

  I have a Dell XPS 420 with intel Core 2 quad core CPU Q6600 2.40 GHz with ATI Radion HD 2600 XT graphics card and disk drive Sony BD RW BWU 5005. Are all drivers, updates and runnning latest firmware. Running WIndows 7 Home premium

  I just tried the troubleshooting of codec in windows fix but this is no problem.

  This computer and the establishment could play bluray very well until the time of the release of Avatar. Avatar would not play until I changed to my current CD player unless I used AnyDVD to crack the encryption... Avatar has also frozen on stop. Any released movie after that Avatar has the same problem. With the help of AnyDVD makes no difference.

  Can anyone help with a solution or a systematic approach to try to find the problem. Thank you.

  I think that two reasons possible here 2:
  one is that your material
  Another is your software, you can try, it's good enough to play Blu - ray

• playback freezes during playback

  Hi gurus

  Ive just installed Speedgrade and have tried to edit a small SD video, I can play for a while, but when I rub through it freezes on a random frame, the sound is fine, but it just sticks. Ive tried to go to the same movie via file/Direct link first to speedgrade, and it seems to work very well.

  It just seems to be freezing as a standalone application.

  Thanks in advance

  C

  Thank you, Neil, you're right its certainly wayward, tried to turn the sound and it worked, now Ive turned on it back

  and guess what it works again, so thanks for that.

  Kind regards

  C

• MultiCam playback plays infinitely

  I have CC 2014 and in the older CC, sometimes, when you started reading in Multicam mode with the selected mounting Panel, she continues the reading and stop responding to all commands and play indefinitely until you kill the first in the Task Manager. Now he does this even with the selected program monitor so MC became useless. Help?

  This is the fourth thread I know problems where multicam reading that either was not at all stop at least continues to play a few seconds after the stop command. Gather in one place will facilitate our efforts to get a handle on this. Please go to this thread: quick read (multicam) will not stop until the end of the calendar.

  I'll lock this thread...

• Video playback freezes and makes a break

  Original title: media to play.

  How can I fix gel and a break on my display.  No problem with the audio.

  Hi Ronni-Ron,
   
  -What version of the operating system that you are using as I see that you posted the same question twice in Windows XP as well as Windows 7 forum?
  -What is the player that allows you to watch videos? It is the media player or another?
  -If the media player you are using, what version of Media player do you use?
  -You receive an error message or error code while this problem occurs? If Yes, indicate the same.
  -What is the file format with which you face this problem?
  -Are - what you are talking about for videos online that watch you or video stored on the computer?
  -Did you change on your computer before this problem?
   
  Run the troubleshooter from this link and check if it helps to fix the problem:
  Playing video files crashes or blocking Internet Explorer or Windows
   
  After return with more information pertaining to the matter for us help to help you better.

• Length of the Clip setting causes the temporary freeze on playback

  I use a PC with 16 GB of ram and Windows 10 first Pro 2015.

  I am changing a 5 part series, each part is about 20 minutes.

  I use a dynamic link to after effects 2015. Each clip dynamic link has been made and replaced.

  The problem comes when I adjust the length of any clip or move the clip on the timeline. Playback freezes for several minutes. Apart from that, it is fine, until I need to adjust the length or move another clip. Another 3-4 minutes gel. It seems that this then that his jelly:

  

  Anyone know what I can do to fix this?

  Thanks in advance

  Hi third Contact,

  I use a PC with 16 GB of ram and Windows 10 first Pro 2015.

  Disable the Composite overview over the filling in the settings menu of the timeline.

  Thank you

  Kevin

• Premiere Pro CC 2014 - jerky playback of multicam

  So I'm under Premiere Pro CC 2014 (8,0) on OSX (10.8.5) Mountain Lion, using CUDA acceleration and everything works well except for one thing: when I do a multicam edit I switch the program monitor in multicam as usual mode. However, during playback, I'm dropping frames with video (audio playback is normal). This happens with any definition, even at 1/8 reading. As I kept the previous version of Premiere Pro (7.0), I checked it's multicam playback and it is quite normal to full resolution. After spending and corresponding to all the parameters of 8.0 to 7.0 I am really at a loss with this problem, ideas?

  As I said earlier, the only solution I found was to transcode my images at DNX. With DNX images, I was able to make multicam with 8 angles without lag. With images of ProRes he would get bogged down with only 3 cameras.

• Views of Angle MultiCam sync with Clips

  I ran into a weird issue with a multicam sequence.  I have 4 corners upward, and the views of angles 1-3 are all out of sync with their own clips by a variable number of seconds.  The clips are all perfectly synchronized in the chronology, and the part "out program" display multicam is correct.  It is disconcerting. Multicam playback is also really * restless where, normally, it is very smooth.

  I have another multicam sequence in the same project that is configured in the same way and rereads dead-end, with all views of the angle in synchronization.

  Anyone seen this before?   I emptied all of my preview and cache files and import the sequence into a new project and it's always wrong to behave.

  Also, for some reason, on load audio and video clips keep coming back on 'Even as project', even though I have to direct them to a folder on one of my paintings, and save the project.

  Thank you.

  4 angles on a 1080 p timeline.  All the clips were shot at 23.976:

  (1) RED Epic 5 K HD resized to 1080 p, 23.976

  (2) canon 5 d mk3, 1080 p, 23.976

  (3) canon 6 D, 1080 p, 23.976

  (4) RED Epic 5 K HD fist of 1:1, 1080 p, 23.976

  I solved the problem!  While footage source for multicam problem sequences start to 00:00:00:00, they all contain sequences where the audio begins at the beginning, but the video track starts a few seconds later.  I inserted a black video in the beginning of the video track of the sequence of each source and the angle views were resolved instantly.

• First Pro CC crashes when cutting (often during playback)

  I had first Pro CC gel on me on every 2 minutes when I cut in the timeline using keyboard shortcuts (trim backward/forward a framework). It seems to happen more often during playback, but sometimes also exclusively during the Cup (and sometimes when I use a keyboard shortcut for step forward/backward a picture)-obviously not during playback.

  This seems to be a weird gel & not an accident, in the sense that playback freezes and I get the spinning beachball/wheel of death and the first does not, but when I force-quit, first resumes playback for a second before giving the error message "First has experienced a serious error and needs to close" and then close.

  Any help would be appreciated - it's really causing a massive slowdown in my editing.

  I use a MacBook pro

  Retina, 15-inch, early 2013

  Intel Core i7 2.7 GHz

  16 GB 1600 MHz DDR3

  NVIDIA GeForce GT 650M 1024Mo

  C02L255BFFT1

  OS X 10.8.4 (12E55)

  First Pro CC completely up to date, I'm editing the files audio .aiff 48 kHz or h.264 video in a timeline of fps 1080 p 24, on waveforms, acceleration GPU off the COAST.

  The same problem also happens on my iMac (early 2013 - I don't have the specs on me).

  I just called adobe support and the problem was resolved by trashing "7.0" files in the ~/Library/Application Support/Adobe/Premiere Pro directories / and ~/Library/Preferences/Adobe/Premiere Pro.

  Rampage of the preferences of the user (i.e. the preferences in ~/Documents/Adobe/Premiere Pro/7.0 /) was not enough, but it might be necessary.

  Thank you

  Henry

• Yoga 2 Pro stutters when you play videos

  Hey guys,.

  I was wondering if anyone else has this probem stuttering when I look at videons on the yoga 2 pro? I configuring i5/256/8 GB of ram, but really, watch videos should not be a problem for the configuration even lower?

  Any help would be appreciated.

  It was just a normal 480 resolution on youtube video. He had nothing to do with the settings manager energy wasn't endurance mode, cause I just use my laptop under normal parameters. Actually, I found another thread where the guy had the same problem, and fixed it by increasing the size of virtual memory file / page. I followed his instructions, and it seemed to have done the trick. Interestingly, the virtual memory is supposed to be 1 or 1.5 times your ram, but my virtual memory file size / page is only 1 GB from my 8gbs of ram. Maybe it has something to do with the lozenges of limitation, who knows! The solution/thread I found is here: http://forums.lenovo.com/t5/Idea-Windows-based-Tablets-and/Yoga-2-Pro-HD-playback-freezes-other-appl... I hope this helps someone out there.

• Frequency counter measurement crashes when you're away point zero (NI USB 6343, error-200284)

  Members of the Forum,

  I have problems with a measure of the frequency on a DAQ Mulitfunction of NI USB 6343 X series.  I use the meter 1 (door axis for frequency signal, PIN to DGND 82 77). The couple HBM T10F flange that I use (powered by a power supply of 24V) emits a signal of frequency between 5000 and 15000Hz with 10000Hz being the zero point. Couple flange has a capacity of 5kN.m (15000Hz = 5kN.m; 5000Hz = - 5kN.m).

  I have been using the VI attached for a few months now without any problems.  Now, the VI works fine as long as the couple remains inside a few hundred Hz of the zero point.  However, when the frequency increases further reading couple begins to freeze and finally I get either of these two errors:-200279 or-200284 related samples is not not available.  I noticed that the light on data acquisition close compromise during these periods of frost.

  Here is an example step by step my problem using cal shunt of the flange of the couple:

  1. I have run the VI and couple bed properly around 10000HZ (Active light, indicator light ON)

  2. I have apply the excitation of 5V to the shunt cal and frequency climbs to about 50% of the ability to couple brackets (as it should)

  3. as soon as I remove the excitement 5V playback freezes and the light on the acquisition of data.

  4 if I apply the 5V once again, until the timeput occurs, the led turns on and the acquisition of data reads the signal correctly.

  This type of problem would be more DAQ-related or is it the flange of the couple itself.

  Thanks in advance,

  Mike

  Solved.

  I did some troubleshooting this morning and it turns out that the vibrations of the system had not tightened a screw that was connector to the stator flange torque causing a bad electric signal of the torque flange itself.

  Everything works fine again.

  -MB

• CC 2015 Multicam freezes for a few seconds each time I pass cameras

  I am modifying a project of 4 cameras multicam in 2015 CC and whenever I click on a camera or select a camera with the keyboard shortcuts, reading about all the cameras freezes for a few seconds, then starts again. Audio playback is not interrupted. Of course, this is a very frustrating issue because I didn't happen on other projects making, and it is impossible to cut quickly from the camera to the camera when I don't see what I am cutting. It should not be a performance issue because the media on the SSD internal and rendered and replacement with Cineform has no effect on the issue.

  Turned off the coast of GPU acceleration reading the parameters of the project and the problem has been resolved.

• WMP freezes, playback and time counter freeze and after a few seconds it will start from the point where it stopped.

  Original title: WMP 11 continues to stop audio playback

  I use WMP 11 for months with no reading problems but since yesterday evening he continues to stop for about 20 seconds every five minutes or so. When she did this, WMP freezes - meter reading and time to gel and I get the hourglass - and then after 20 seconds or more, the trail starts from where it stops. What is happening on all the tracks I did not play a single. I tried 20 audio files (mp3 all) through a dozen different albums. In addition, the gap between tracks seem longer than usual. I feel that it is looking for the data and playback stops because the time it takes to find the data is longer than the amount of data he has for playback? Either way, my files are stored on an external drive, and I'm now ask to update WMP for 'monitor folders' once again.

  I also downloaded a new copy of WMP 11 but this has not fixed the problem.

  I ran Fix It from Microsoft, but it has not to report any issue so I'm stumped. Any help appreciated thanks.

  Laptop Dell Inspiron 1300
  Windows XP SP 3
  WMP 11 - updates enabled
  Active Windows updates
  MSE firewall on / updates enabled

  Registry fixers never used because they can damage the file system!

  Thank you, Anoop - I notice that it is 7 - t - it too much work for XP? I'll take a look, although I found closure and restart toured (as far as the burning problem goes). Thanks for your help.