Multimedia video controller
Have a NVidia graphics card which is up-to-date for the drivers but the folder Device Manager to "multimedia video controller"is marked with yellow." Not a matter of update as long as nothing is in this folder. Reinstall one have been carried out and "update driver software" has been done. How can be done for a cure for this?
MNewsome salvation,
What is the model of nVidia card?
You have a TV tuner or another device installed in the PC?
If you havesn t, you can turn off the video chip embedded in the BIOS.
Instructions should be in the manual that came with the computer/motherboard.
Chris
Microsoft Answers Support Engineer
Visit our Microsoft answers feedback Forum and let us know what you think.
Tags: Windows
Similar Questions
-
Re: Qosmio G20 - installation of a multimedia video controller
Hi friends
I tried to install my Qosmio G20 Windows XP (ECM) with PCI device...
Multimedia video controller PCI.
USB device.
I manually installed and mapped the path of the pilot to "" C: / cd tools "»
It gives me an answer that the driver is found for the device and get finished...
So what am I suppose to do now and to operate...Tanx in advance
RajaHello Raja
To be honest I'm a bit confused now. As much as I know folder Tools CD is available if the laptop is preinstalled with recovery media. So please can you me something about this?
Have you installed image recovery or your own version of Windows XP Home edition?
-
How to restore the multimedia controller and multimedia video controller to the system?
How to restore the multimedia controller and multimedia video controller to the system? These items are indicated with yellow exclamation point in the conflict. How to solve these elements to correct the situation?
Scan your computer with Speccy, Pc Wizart or SIW software and download the driver from manifacturied of the material.
-
Multimedia video controller problem
The multimedia video controller under other devices has a problem of no drivers. The device is an ATI Radeon X 700. I just upgraded from Windows XP 32-bit for 32-bit Windows 8. Everything is now except for the 20 inch screen is not fully used. There is a black stripe 2 inch left and right, make the screen square or rectangle like a flat screen. Since it is listed under other devices, I'm not able to select the manufacturer and model. When I download the driver for Windows 7 32-bit, (does not have an 8), it said installation successful and compatible. When I click with the right button on video controller in Device Manager and drill down to the folder, it says that there are no drivers in this folder. Please notify. Thank you in advance!
Suggest you buy a new graphics card for the system update
Contact the manufacturer for an updated VGA driver
You will have the very basic video support, until you can provide a better driver.
When you did the update for Windows 8.1, did you run the upgrade wizard?
Check that the system is extensible using Model Checker from Sony?
http://eSupport.Sony.com/p/os8upgrade.pl?&template_id=1&Region_ID=1
-
Qosmio F20 - 136 multimedia video controller does not
Control, video controller Panel material-multi media has the yellow question mark. Also in MCE, I get a message saying that the drivers work do not or TV tuner hardware.
I reinstalled from the recovery discs and installed all updates to MCE 2005 rollup including net.1.1 sp1. Physical control of the Panel there is no TV Tuner input.
In tools the tv tuner driver is shown as installed.
Any advice would be welcome. ------This is a new machine to buy, so it may be a hardware problemHello
As far as I know, you will not find all the tuner entries in the control panel.
In Control Panel, you can find the graphics card option as nView desktop manager of nVidia Geforce.
The TV tuner driver is important to receive signals in MCEHowever, if the yellow exclamation point appears in the device manager then I guess the driver fails or is wrong. You should try to update. Please note that on the driver of the page you will find driver for Windows XP and WinXP MCE.
-
Multimedia "Video Controller" error Qosmio G20 & NO sound
I have a brand new Qosmio G20. It has been properly installed according to list of instructions installation of Toshiba (all listed in the correct order.
Unfortunately, whenever I start (WinXP Pro), I received a message that the system has detected new hardware. In the presentation of the material, it lists a "video-controller as" and a "PCI device" that it has not been installed correctly. I tried to solve this by downloading all kinds of latest drivers on the Toshiba site. But apparently the system is still missing some drivers, although I can't know who they should be. Also in this situation, I have no sound available. I tried to reinstall the audio driver. But at the end of the installation procedure, it says that the driver is not found and leaves the facility?
Help, please...
Hello
If you want to identify an unknown in the Device Manager device please read this document:
http://support.toshiba-tro.de/KB0/TSB57014E000QR01.htmIn addition, this laptop came with Win MCE. Have you installed the driver on the right its designed for Win XP?
Best regards
-
Input device multimedia video controller/PCI Windows 7
Multimedia video Controlloer and PCI input devices have a yellow question mark in device, "other devices Manager."
I can do something to solve this problem. I'm not sure what kind of video card, it is, but I think its Nvidia p300 is what it says on the card when I looked...
Then when I go to download a driver from nvidia, they say, I already have the update drivers... I do not understandInformation on the site with this driver:
Supported operating systems: Editions 32-bit and 64-bit Windows 7 RTM / Vista SP2 / SP3 of XPIf you want to say thanks to someone just click on Vote as useful (i.e. under each avatar of the user).
If your issue is resolved, please indicate then your wire is with solution.
-
SR1000 controller multimedia Audio and video controller (VGA Compatible)
Hello
I have a Compaq SR1000 and look for drivers for:
Video controller (VGA Compatible)
Multimedia Audio Controller
SM Bus controllerI visited the site of Compaq and HP for the drivers but they all list the following computers:
- Compaq Presario SR1000IL
- PCCompaq desktop Presario SR1000T (P8657H)
- Compaq Presario SR1000V (P8657F)
- Compaq Presario SR1000Z (P8657J)
- Compaq Presario SR1000Z (PU026AV)
I tried to download drivers from the SR1000IL for my SR1000, but none worked.
Any help would be greatly appreciated.
Thank you.
@Freddie09
ADI SoundMax:
Intel graphics card:
-
How can I GET MULTIMEDIA AUDIO CONTROLLER DRIVER AND VIDEO CONTROLLER Driver
How can I find driver video controller and multimedia audio controller driver IHAVE TWO COMPUTERS WITH WIN XP DOWNLOAD ON THEM TIMES NEED THESE DRIVERS
Hello
You can get the drivers from the website of your computer manufacturer. It is in the page download and Support.
Be sure to enter your build of the computer and the operating system that you run on your computer to ensure you receive the correct drivers.
David
-
Missing video controller and multimedia Audio Controller
I replaced the hard drive on my emachine T2842. Windows loaded no problem but I can't monitor all work properly. It lacks the multimedia audio controller and video controllers.
Hello Dave
You will need to install the drivers for this system. Click on the link below. It will redirect you to the emachines support website. Click on the "Drivers & downloads" link, then select your system. All drivers available will be listed. Thank you. -
My speakers don't work.i have a yellow question mark by my multimedia audio controller in the computer management area.can someone help me please.
Hello
· What is the number and the model of the computer?
· Were there any changes made on the computer before the show?
· Who is the service pack installed?
Check if an error code is listed in the Device Manager:
a. click on start
b. click Run, in the Run dialog box type devmgmt.msc
c. in the Device Manager window, locate the drive of audio, video and game controllers and expand drive, double-click the sub element to check if an error message or error code is listed.
You can access links which has information about how to upgrade a sound card driver in Windows Vista and Windows XP: http://support.microsoft.com/kb/166774
And how to manage devices in Windows XP: http://support.microsoft.com/kb/283658
-
driver for multimedia audio controller
Hello forum,.
I convinced a friend buy a Latitude D600 used laptop with a version french Windows on it, I told him I could install a new Windows English about it as I did but after reformatting the drive drivers for the card sound (and other devices) have disappeared. In the Manager of devices under other devices there are 6 yellow exclamation/points mark next to the following:
Ethernet controller
Multimedia Audio Controller
Network controller
O2Micro SmartCardBus_Reader
Modem PCI
Video controller (VGA Compatible)
I downloaded the drivers from the dell support site, but impossible to reinstall via Manager devices/Reinstall driver... I have burned the drivers on a cd and also copied their drive but when even her are not recognized.
Help, please
Thank you
Dogface
-
Compaq Evo D300: Multimedia Audio controller drivers/Codecs
Compaq IT support/Codec.
Dear community of Compaq.
I was informed by the Intel online community to contact Compaq for Codecs that are not themselves. Can you please help me by providing the necessary driver/Codec below?
The Intel answer/advice for me and my original question which is lower. Thank you very much.
Mr. BennettIntel community advice
"The device that you identified is the Intel high definition Audio interface. The driver you need really need is not for the interface itself, but for the media Codec that completes the circuit. Intel cannot help you with that. they do not have these Codecs. You must contact the Board vendor for the correct driver. »
My original Question from Intel
"Dear community.
Can someone help me find a driver "Multimedia Audio Controller" for the "Compaq Evo D300" PC?
Exact model: http://h20564.www2.hp.com/hpsc/swd/public/readIndex?sp4ts.oid=92161 & lang = to & cc = us
"077Ch" is the main map.
Company and feature:
VEN 8086
DEV 2445
I've upgraded to Windows 7 from XP but I think that Intel don't do drivers more for this PC.
I would be very grateful for help.
Thank you.Mr. Bennett"
Thank you.
Mr O Bennett
You are the very welcome.
I mean, it is explore you the file and select with the mouse, then click Next and it should install the driver
You cannot copy and paste anything.
You can first try this method easier to install the driver...
When you arrive at her browse my computer for driver software option, go to: C:\SWSetup\sp27103, make sure that the include subfolders is selected and see if the pilot goes like this.
The original file that I gave my instructions has the hardware ID you posted, so you need to install the driver (8086-2445)
[AnalogDevices]
% * WDM_AC97AUD. DeviceDesc % = WDM_ICHAUD, PCI VEN_8086 & dev_2445 & subsys_00070E11
% * WDM_AC97AUD. DeviceDesc % = WDM_ICHAUD, PCI VEN_8086 & dev_2445 & subsys_00080E11
% * WDM_AC97AUD. DeviceDesc % = WDM_ICHAUD, PCI VEN_8086 & dev_2445 & subsys_00090E11
% * WDM_AC97AUD. DeviceDesc % = WDM_ICHAUD, PCI VEN_8086 & dev_2445 & subsys_000B0E11
% * WDM_AC97AUD. DeviceDesc % = WDM_ICHAUD, PCI VEN_8086 & dev_2445 & subsys_000C0E11
% * WDM_AC97AUD. DeviceDesc % = WDM_ICHAUD, PCI VEN_8086 & dev_2445 & subsys_000D0E11
% * WDM_AC97AUD. DeviceDesc % = WDM_ICHAUD, PCI VEN_8086 & dev_2445 & subsys_000E0E11
% * WDM_AC97AUD. DeviceDesc % = WDM_ICHAUD, PCI VEN_8086 & dev_2445 & subsys_000F0E11
% * WDM_AC97AUD. DeviceDesc % = WDM_ICHAUD, PCI VEN_8086 & dev_2445 & subsys_00100E11
% * WDM_AC97AUD. DeviceDesc % = WDM_ICHAUD, PCI VEN_8086 & dev_2445 & subsys_00880E11
% * WDM_AC97AUD. DeviceDesc % = WDM_ICHAUD, PCI VEN_8086 & dev_2445 & subsys_00890E11
% * WDM_AC97AUD. DeviceDesc % = WDM_ICHAUD, PCI VEN_8086 & dev_2445 & subsys_008B0E11
% * WDM_AC97AUD. DeviceDesc % = WDM_ICHAUD, PCI VEN_8086 & dev_2445 & subsys_008C0E11
% * WDM_AC97AUD. DeviceDesc % = WDM_ICHAUD, PCI VEN_8086 & dev_2445 & subsys_008D0E11
% * WDM_AC97AUD. DeviceDesc % = WDM_ICHAUD, PCI VEN_8086 & dev_2445 & subsys_00A50E11
% * WDM_AC97AUD. DeviceDesc % = WDM_ICHAUD, PCI VEN_8086 & dev_2445 & subsys_00A60E11
% * WDM_AC97AUD. DeviceDesc % = WDM_ICHAUD, PCI VEN_8086 & dev_2445 & subsys_00A70E11
% * WDM_AC97AUD. DeviceDesc % = WDM_SPINNA, PCI VEN_8086 & dev_2445 & subsys_000A0E11
% * WDM_AC97AUD. DeviceDesc % = WDM_SPIDER, PCI VEN_8086 & dev_2445 & subsys_008A0E11
% * WDM_AC97AUD. DeviceDesc % = WDM_ICHAUDH, PCI VEN_8086 & dev_2445 & subsys_124C103C
% * WDM_AC97AUD. DeviceDesc % = WDM_ICHAUDH, PCI VEN_8086 & dev_2445 & subsys_80101043
% * WDM_AC97AUD. DeviceDesc % = WDM_ICHAUDH, PCI VEN_8086 & dev_2445 & subsys_890D1509
% * WDM_AC97AUD. DeviceDesc % = WDM_ICH_H, PCI VEN_8086 & dev_2445 & subsys_1274103C
% * WDM_AC97AUD. DeviceDesc % = WDM_HGUAD, PCI VEN_8086 & dev_2445 & subsys_126E103C
% * WDM_AC97AUD. DeviceDesc % = WDM_HGUAD, PCI VEN_8086 & dev_2445 & subsys_126F103C
% * WDM_AC97AUD. DeviceDesc % = WDM_HGUAD, PCI VEN_8086 & dev_2445 & subsys_1279103C
% * WDM_AC97AUD. DeviceDesc % = WDM_HGUAD, PCI VEN_8086 & dev_2445 & subsys_127A103C
% * WDM_AC97AUD. DeviceDesc % = WDM_AMAZON, PCI VEN_8086 & dev_2445 & subsys_806A1043
% * WDM_AC97AUD. DeviceDesc % = WDM_DUBLIN, PCI VEN_8086 & dev_2445 & subsys_3084109F
% * WDM_AC97AUD. DeviceDesc % = WDM_DUBLIN, PCI VEN_8086 & dev_2445 & subsys_3181109F
% * WDM_AC97AUD. DeviceDesc % = WDM_DUBLIN, PCI VEN_8086 & dev_2445 & subsys_80761043 -
Satellite Pro 6000: video controller - driver compatible vga
Hello
I have a Satellite Pro 6000 but I can't watch DVD because they run very slowly.
That's probably because my video controller is not installed, but I can't find a
Driver video controller for a 6000 SP. My OS is XP.
Can someone help me?
Thank youHello
You need to install the Trident display driver. You can find it on the European driver Toshiba page in the Archive folder.
http://EU.computers.Toshiba-Europe.com/cgi-bin/ToshibaCSG/download_drivers_bios.jspChoose Archive-> Archive Pro Satellite-> Satellite Pro 60xx-> Satellite Pro 6000-> Win XP
By the way; You must use a special software like PowerDVD or WinDVD to play and watch DVD movies!
-
HP Pavilian 533w - Multimedia Audio Controller will not charge
I have a HP Pavilion 533w, I can not get the multimedia Audio Controller to load. I am running Windows XP home, and this is a new installation. The error code is 28 and I visited HP website and followed all their directions without help.
Can someone please tell me why I can not get the sound edge working in this computer? I worked for two days on this thing, and I'm about to shoot this thing and build a computer that works.
P. S.
The sound was functioning before the installation of XP Home
Hello:
It seems that your PC can have two different mothers:
We have audio ADI 1981 and it has the Realtek audio.
Audio driver Realtek AC97 is here:
Accept the agreement, download and install the second on the list:
Driver ADI AC97 integrated digital Audio:
Paul
Maybe you are looking for
-
Photos automatically remove and duplicate
Why my duplicate photos and why some endangered. I'm very adamant on using iCloud as my main library, but not my only. Thanks be to God. I noticed that my pictures will disappear at the time and some years ago will duplicate as if they were taken rec
-
How upgrading to the latest version of Firefox, so my system doesn't support?
I tried to sign on my Hotmail email account that I managed to do successfully. However, as soon as the connection a message here asking me to upgrade my Firefox to the latest version. I clicked this option, but Firefox update screen says that my syst
-
Error code 0 x 643 receipts when you try to install Net Framework 1.1 Service Pack 1 update
With the help of Dell XPS 410 with XP pro service pack 3
-
How to determine which were installed the SP3 and IE8
I'm working on a friend's computer troubleshooting. I plan to roll back of IE8 to IE7 (or it might even be IE6). However, I want to just try this if I know for sure that IE6 has been upgraded AFTER SP3 has been applied. I am trying to determine where
-
HP deskjet 2050 has muliple scan
I hope that some kind person out there can help. A printer using HP Deskjet 2050 all-in-one, I'm wanting to analyze several A4 sheets and finally to create just a long PDF document. Step by step instructions preferred. Thank you very much David