Re: Qosmio G20 - installation of a multimedia video controller

Similar Questions

• Multimedia video controller problem

  The multimedia video controller under other devices has a problem of no drivers.  The device is an ATI Radeon X 700.  I just upgraded from Windows XP 32-bit for 32-bit Windows 8.  Everything is now except for the 20 inch screen is not fully used.  There is a black stripe 2 inch left and right, make the screen square or rectangle like a flat screen.  Since it is listed under other devices, I'm not able to select the manufacturer and model.  When I download the driver for Windows 7 32-bit, (does not have an 8), it said installation successful and compatible.  When I click with the right button on video controller in Device Manager and drill down to the folder, it says that there are no drivers in this folder.  Please notify.  Thank you in advance!

  Suggest you buy a new graphics card for the system update

  Contact the manufacturer for an updated VGA driver

  You will have the very basic video support, until you can provide a better driver.

  When you did the update for Windows 8.1, did you run the upgrade wizard?

  Check that the system is extensible using Model Checker from Sony?

  http://eSupport.Sony.com/p/os8upgrade.pl?&template_id=1&Region_ID=1

• How to restore the multimedia controller and multimedia video controller to the system?

  How to restore the multimedia controller and multimedia video controller to the system? These items are indicated with yellow exclamation point in the conflict. How to solve these elements to correct the situation?

  Scan your computer with Speccy, Pc Wizart or SIW software and download the driver from manifacturied of the material.

• Multimedia video controller

  Have a NVidia graphics card which is up-to-date for the drivers but the folder Device Manager to "multimedia video controller"is marked with yellow."  Not a matter of update as long as nothing is in this folder.  Reinstall one have been carried out and "update driver software" has been done.  How can be done for a cure for this?

  MNewsome salvation,

  What is the model of nVidia card?

  You have a TV tuner or another device installed in the PC?

  If you havesn t, you can turn off the video chip embedded in the BIOS.

  Instructions should be in the manual that came with the computer/motherboard.

  Chris
  Microsoft Answers Support Engineer
  Visit our Microsoft answers feedback Forum and let us know what you think.

• Multimedia "Video Controller" error Qosmio G20 & NO sound

  I have a brand new Qosmio G20. It has been properly installed according to list of instructions installation of Toshiba (all listed in the correct order.

  Unfortunately, whenever I start (WinXP Pro), I received a message that the system has detected new hardware. In the presentation of the material, it lists a "video-controller as" and a "PCI device" that it has not been installed correctly. I tried to solve this by downloading all kinds of latest drivers on the Toshiba site. But apparently the system is still missing some drivers, although I can't know who they should be. Also in this situation, I have no sound available. I tried to reinstall the audio driver. But at the end of the installation procedure, it says that the driver is not found and leaves the facility?

  Help, please...

  Hello

  If you want to identify an unknown in the Device Manager device please read this document:
  http://support.toshiba-tro.de/KB0/TSB57014E000QR01.htm

  In addition, this laptop came with Win MCE. Have you installed the driver on the right its designed for Win XP?

  Best regards

• Qosmio G20: CPU too high with video usage

  Hello

  I've got G20 (2.13 Ghz processor) and nVidia 128 MB GeForce Go 6600 and I noticed that when you run video that my CPU utilization goes up high enough. View tv goes up to about 80%, video in media player substantially the same, but the video clips on Web sites and sites with video banner Web can get up to 100%.

  I don't know if this normal that I had not really noticed before, but lately, with this hot weather, I found that on the days hottest occasionally my system stopped, probably because the fan may not follow.

  My question is if these ages CPU usage % are normal for this system, or I have some setting wrong that puts the load on the processor and not the graphics card. Can someone tell me if I can check how the video processing is done by the graphics card or how I can assure that this is the work and only in passing on overloading the CPU.

  Thank you very much.

  PS I am running the latest drivers video for this machine, obtained from the Toshiba draft.exe page.

  Hi William

  I had a lot of experiences with Qosmio G20 and activity of the CPU under pressure. With the use of the highest processor unit was never overheated just a little harder because of cooling fan.

  As you know Qosmio G20 is powerful multimedia and video unit problem described in your message is really strange. If you wrote that you don't l l notice that before, I assume your personal configuration is responsible for this. On this path, it is not easy to say why this is happening. Try to check the processes running and at the end all of them you don't need. On this way the CPU use should be much lower.

• Qosmio G20 - could not get the video to display on the LCD screen

  I have a laptop Toshiba Qosmio G20, running Windows XP MCE.

  The DVD player on board isn't sounds very well so I thought I would plug an external DVD drive to expand its use. After a lot of internet research, I finally found how to do this. Here's my setup.

  Using the monitor port I used the adapter 3 RCA jacks. (There is no S-video on the DVD drive and an adapter did not work). I finally discovered that in order to get the image on the screen, I have to use Fn + 4. Now, here's where I'm having the problem. I can't get the video to display on my external LCD. FN + 5 didn't do. The monitor is an I - inc AH191D and is connected by VGA cable. There is no driver other than the one for the VISTA operating system... That is why it is not anywhere in the Device Manager.
  Here are the settings I use in order to have all that shows on my desk, shows on the monitor.

  In Control Panel open to the screen. Properties
  Number chosen 1 - multiple monitors GeForce Go6600 video card...
  Advanced under
  the GeForce G06600 tab,
  nViewDisplay Mode: clone 1 a 1 b
  The main screen: digital flat screen
  Secondary display: AH191

  I also tried using the properties of controls on Toshiba. He says under TV output TV output but gives options of the program, but I don't know what I would use. Any ideas out there?

  Wait I'm confused, if you try to send the output of your external DVD drive in the laptop, and then display the image on an external monitor attached to laptop?

  If you use the DVD player on your laptop, it will be good quality S-video as a signal of low resolution.

  Is there something wrong with the DVD player?

  If it's just the DVD software you don't like, you can download other DVD players. PowerDVD is excellent, its better than WinDVD and other players in my opinion.

• Qosmio F20 - 136 multimedia video controller does not

  Control, video controller Panel material-multi media has the yellow question mark. Also in MCE, I get a message saying that the drivers work do not or TV tuner hardware.

  I reinstalled from the recovery discs and installed all updates to MCE 2005 rollup including net.1.1 sp1. Physical control of the Panel there is no TV Tuner input.

  In tools the tv tuner driver is shown as installed.
  Any advice would be welcome. ------This is a new machine to buy, so it may be a hardware problem

  Hello

  As far as I know, you will not find all the tuner entries in the control panel.
  In Control Panel, you can find the graphics card option as nView desktop manager of nVidia Geforce.
  The TV tuner driver is important to receive signals in MCE

  However, if the yellow exclamation point appears in the device manager then I guess the driver fails or is wrong. You should try to update. Please note that on the driver of the page you will find driver for Windows XP and WinXP MCE.

• Input device multimedia video controller/PCI Windows 7

  Multimedia video Controlloer and PCI input devices have a yellow question mark in device, "other devices Manager."
  I can do something to solve this problem. I'm not sure what kind of video card, it is, but I think its Nvidia p300 is what it says on the card when I looked...
  Then when I go to download a driver from nvidia, they say, I already have the update drivers... I do not understand

  Information on the site with this driver:
  
  Supported operating systems: Editions 32-bit and 64-bit Windows 7 RTM / Vista SP2 / SP3 of XP

  If you want to say thanks to someone just click on Vote as useful (i.e. under each avatar of the user).

  If your issue is resolved, please indicate then your wire is with solution.

• Qosmio G20-120: 1080 p HD video question - photo stucks for 1-2 seconds

  Hi guys,.
  I have problems with playback of 1080 p HD progressive video on my G20-120. Photo gets stuck for 1-2 seconds every 5-7 seconds. Sound has no problem.
  I try to close all programs and applications that are running, but again it gets stuck. These help anyone make you think:

  1 - upgrade 1 GB RAM to 2 GB
  2-overclocking either the CPU or the video card (I don't know if its possible at all) if so how do you?
  3. change the 128 MB 256 MB video card (again once I'm not sure if it can be changed)

  Thank you very much.

  Hello

  What application should I use to watch these movies?

• Installation of a multimedia Audio Controller

  I recently got a new computer, used by a school which has swept clean from the computer.  The desktop PC is

  a HP Compaq dc5100.  I installed Windows XP Professional 2003 on it.   I've updated most / all the drivers on that, except when I go to Device Manager, I see that there is a yellow exclamation next to OTHER DEVICES.   As such, there is a yellow mark next to "Controller Audio." multimedia

  Now, I tried to do a right click on it and make a "update driver." However, he returned with an error that says, "the hardware was not installed because the wizard cannot find the necessary software."   Then, I put the installation disc in and I tried to load it from there, but received the same error.

  I uninstalled and rebooted the system, thinking that it can recognize this and install it, but that did not fix it or the other.

  What else can I try?

  Mark

  Hi, Mark:

  The game of recovery diskettes were made when the PC was made, which means that all the drivers are working, but they will be those originally supplied with the PC.

  You will need to install XP SP3 because I'm sure that the operating system recovery disks installing XP SP2.

  You can then run the windows update and download and install all security updates. Under the hardware section of windows update, there may be newer drivers to install.

  Otherwise, I wouldn't worry on this subject.

  Paul

• Qosmio G20 and Windows 7

  Hello

  I have an old Qosmio G20-115 that uses the RAID controller for two hard disks. I tried to install Windows 7 (RC1) and Windows Vista, but I'm still stuck at time of installation of Windows, detect hard drives. After reading the various reports from this forum and others sources on the web, I tried many times to get setup to detect the discs using drivers from various different sources, but nothing helped.

  Is there something more fundamental, that I hurt myself? What RAID parameters need to be defined in the BIOS when trying to install an OS? If someone managed to get Windows 7 (RC1) working on their G20? Someone at - it pilots have tested and they managed to get Vista/Windows 7 on their G20-115 s?

  For any help or suggestion would be appreciated.

  Thanks in advance.

  When installing Win7, you must have the RAID driver on a floppy disk or USB key. Win7 Setup prompts you for a custom storage driver.

  You can get the RAID for Vista driver on the Toshiba site. It should work in win7.

• Qosmio G20 - Drivers asked

  In my list of equipment I have lack of drivers for a "multimedia controller-video" and a "PCI device". Since one has with the system recovery CD/DVD, I ask someone to help me get these drivers.

  They can be found by searching on the recovery CD/DVD using the descriptions below between "" as search criteria.
  (a) for the multimedia video controller:
  "VEN_14F1 & DEV_5B7A & SUBSYS_01101179 & REV_00"

  (b) for the PCI device:
  'VEN_8086 & DEV_2668 & SUBSYS_00011179 & REV_03'

  Hello

  I put t think that he of able to find the drivers on the CD/DVD recovery because on this CD/DVD you can find an image Ghost (files). There is a picture files especially Toshiba.
  In this case there are no drivers on the CD or DVD.

  In my opinion if you want to use any CD/DVD recovery, you can contact the ASP. I'm sure that it s not very expensive.

  Good bye

• Can I connect VHS Video Recorder for Qosmio G20 using the antenna in the Port?

  Hello.

  I connect my G20 a very old VCR. Can I connect it to the antenna in the port? Someone at - it tried? Because it will not need to buy a cable SCART. And for what I searched by linking to the video in Port, if I want to record the signal, I have WinDVD record I did more.
  So I was wondering if connect the VCR to the antenna port. I'll be able to find and record the VHS signal on media center?
  Thank you

  I already tried on S - video In and I get black screen

  More: When I connect the laptop to a TV it works only via the S-video port. When I use the D-video port it simply doesn't work. The black screen.

  Of course you can do it. On this Qosmio laptop TV tuner works on the same principle as usual TV. You can watch movies on Qosmioplayer or using Media Center Edition VHS. In both cases start movie VHS and let Qosmioplayer or MCE sweep all TV channels. On one of them, you will see the picture of VHS VCR.

  All that s. I tested it with Qosmioplayer and MCE too. It works without any problem. I also tested recording option. This also works. Later, I edited material recorded and created DVDs.

  With short words: with Qosmio G20, you can do whatever you want. It's really good multimedia laptop.

• Installation of Pinnacle on Qosmio G20

  Im trying to install pinnacle studio 9 my Qosmio G20, but when you double-click setup.exe, the arrow with the hourglass starts spinning, it waits about 5 seconds, as if the Setup Wizard is preparing to launch, but then just does nothing. Theres nothing wrong with the product of the installation, in the ive just tested on my other laptop and works perfectly! Any suggestions?
  Thanks in advance!

  Hello

  This software is not a product of Toshiba and believe me; It's not easy to say why it of not possible to install this application. I can do only a suggestions, but I'll try to help you ;)
  Did you check if you have enough space on the HARD drive?
  I put t don't know if this helps but try to defragment the HARD disk, and then try again to install this software.

  Good bye