multimedia vs samsung & sd card readers

Similar Questions

• Card readers do not show in the COMPUTER after the installation of EM718AA

  I installed the EM718AA on a xw6600 running Windows 7 Professional. Shows Device Manager all slots for cards 'work properly' but none of the card readers appear in the screen of the COMPUTER. Similarly, media does not show whn plugged into slots.

  Installing the card was not easy, with an appearance of a 'blue screen of death', but the installation seems to resolve itself during a reboot... until I saw the lack of icons of map on the screen of the COMPUTER.

  Any thoughts?

  THX

  The list herewas abandoned in 2012. It supports OS was not WIN7.

  That said, have you tried the cable directly to a USB connector on the motherboard?

• Card readers are not seen: Causes?

  I'm pretty familiar with my XP computer and just realized that some card readers do not recognize yet, others do. This could be related to a problem I have where my camera is not being seen.

  The best guide of services I know is here--> http://www.blackviper.com/service-configurations/

  Choose your version of Windows and have a look.

  You use something close to, if it is more extreme, 'Configuration of Bare Bones' and many things does not work... but none of the services 'Disabled' in this list appears as if it would be related to your problem.  Try to use 'Safe' or 'Tweaked' configurations of services BV and see if the card reader functionality returns.

  In addition to Windows services, you have a number of services to third party as well.  If you're going to turn them off, you might consider simply uninstall the software in need of these services.  The most obvious of them is iTunes.  See http://support.apple.com/en-us/HT204313

  As I wrote earlier, card readers lack.  Unless you have checked on another computer, the fact that you have used for years is not proof that it is still functional.

• USB card readers differ on two HP XP (Home) SP3

  Two HP XP home computers, USB > 2 GB SD card will not be read, but another computer will be. Both are SP3. Limited player has 894Mb memory, other 1.4 GB mem. Where to start looking for the problem?

  SD 2 GB card > are SDHC cards or 'high capacity '.  In addition to patches which are in sp3, you need a card reader can read SDHC cards.  Assuming that you are talking about card readers that are integrated with computers, one of the computers is probably older than the other.

  Also, see http://support.microsoft.com/kb/946629 (but see http://support.microsoft.com/kb/946480)

• USB and camera card readers do not appear in Microsoft Explorer

  When I open Windows Explorer, my USB drives and camera card readers make their appearance is no longer.  They always showed up there in the past.  Can someone tell me please how to make them reappear?

  I tried to plug something on them, but readers still are not displayed.

  Any help is appreciated!

  Hi joym126,

  1. check if the device is detected in Device Manager. Follow the steps to go to the Device Manager

  a. Click Start, type devmgmt.msc and press to enter.

  b. research of universal bus controllers

  2. run the patch from the link below: Tips for solving problems of USB devices:http://windows.microsoft.com/en-US/windows-vista/Tips-for-solving-problems-with-USB-devices

  With regard to:

  Samhrutha G S - Microsoft technical support.

  Visit our Microsoft answers feedback Forum and let us know what you think.

• Chip card readers

  I have a smart card reader already built into my computer. When I had windows xp it worked fine. When XP went on the road and I started having problems with it, I load Windows 7 Professional on the computer. Now my smart card readers do not work and I already tried to download the drivers for it. I also tried turning the plug and play and turn it back on. It is not just acknowledge the readers. Someone at - it suggestions?

  Hello Joanna,

  Thanks for posting your question on the Forum of the Microsoft community.

  I would be grateful if you can provide us with the following information to help us better understand the issue.

  1. What is the brand and model of your computer?
  2. As you mentioned that the card reader is integrated, so what is the brand and model of your computer?

  If your smart card reader does not work on Windows 7 was working fine on Windows XP, this means that the problem is with the drivers. Then I suggest you to update the drivers from the link provided below and see if it helps.

  Update drivers: recommended links

  http://Windows.Microsoft.com/en-us/Windows/update-drivers-recommended-links#update-drivers-recommended-links=Windows-7

  Automatically get recommended drivers and updates for your hardware

  http://Windows.Microsoft.com/en-in/Windows7/automatically-get-recommended-drivers-and-updates-for-your-hardware

  Hope it would help. If problem persists always post back with the current state of your computer and the result of the proposed suggestion, we will be happy to help you.

  Thank you.

• Faster CF and SD card readers?

  Thought of my generation of photo editing and thought of card readers. What is the fastest drive option card (reasonable price)? I have USB 3.0 on the mobo. Who will be the best, or are there internal drives in SATA format that I could connect to the motherboard, or a USB 3.0 drive that I can install at construction time?

  Hello

  Take a look at this site:

  Baz

  http://www.robgalbraith.com/bins/reader_report_multi_page.asp?cid=6007-9392

• No employee of Gov using the 'PIV card' readers?

  Greetings-

  I know there are many Govt employees here who have been allowed to "Teleworking" from home and use their personally owned equipment (POE) versus having a portable Govt assigned to them - that would result by using a card reader so that they could use their PIV card to plug into a USB port it.

  However, those of use with any Mac / Apple products as our equipment challenge readers of cards Govt NOT recognized on our devices to Mac, so we (in my Govt organization anyway) must use what is called "MobilePass chips" that are obtained from an application downloaded from our App Store. They are used with our normal Login User Id and password too.

  BTW-I use a Citrix / CAG VPN to access the Gov Agency (not classified of course!) and prefer to use the PIV player.

  My question is: is anyone know of any material that can be used to read these cards PIV - or software to allow a card reader external to be recognized in a device of Mac in order to read a PIV for this system of "Double authentication?

  NOTE: I know some out there to read "CAC" cards, but these are NOT the same as people "PIV" cards.

  (I tried this way already) * also - if posted in the wrong forum - please move if necessary because I didn't know where. Thank you.

  Post edited by: GunnyFitz
  Added the system used to access Gov Outlook, etc.

  Hi GunnyFitz,

  Thank you for using communities Support from Apple! I'm sorry to hear that you are having these problems with your MacBook Pro. For more information on the current situation with cards PIV on Mac, you can find the article useful next and link (my apologies if you have already seen it):

  OS X El Capitan: on smart cards

  Concerning

• HPpavillon card readers doesn't recognize SanDisk

  Hello

  My Hp Pavilion 8160 m desktop, operating system Windows Vista family premium, doe not recognize SanDisk extreme cards, that I bought. Any idea how I can transfer the photos from SanDisk extrem LENY - 1 card to my office? Thanks for any help. martidist

  Hello

  If the card reader is compatible with memory card, then Yes, it should work (corner of the scenarios he can't).

• Memory card readers do not show in Windows 7

  I just upgraded from Windows Vista to Windows 7 and now I can't view memory card reader drives in Manager of devices or Windows Explorer. Also one of CD burners two (one that isn't R - W) does not appear. I tried the HP site for downloads without result. What should I do to regain the use of these devices? I have the original system recovery disks; I get them from? They are compatible with Windows 7?

  Not a problem, Willie.

  To some people would say you downgraded for Win 7, but I completely agree that you upgraded.  The problem is exactly what you are experiencing.  Among the components of Vista cannot function probperly with Win 7.

  Here's what I want you to try:

  First of all, please disconnect all USB devices and then perform the following steps:

  1. click on the 'Start' button, enter "devmgmt.msc" (without the quotes) in the "Search" bar and press "Enter." If necessary, click on "continue".

  2. in Device Manager, double-click to expand the "USB Bus controllers", right click on the controller host, click "Uninstall" and click "OK".

  3. Repeat step 2 to uninstall all items under 'USB Bus controllers'.

  Then, restart your computer and Windows 7 will automatically reinstall all USB controllers.

  Please click on "BRAVO", if I helped you and click on "Accept as Solution" If your problem is resolved.
  

• camera card readers

  My Pavillion Elite cannot read the memory card from my digital camera from Canon.  It doesn't matter if I use the provided by Canon or the SD/MMC slot USB card reader built into the computer.  I have no problem loading the pictures of my old Olympus via the old fashioned the USB cable.  What gives?

  Hello Katusha, here is a link to Amazon that shows some criticism for your card reader. Many users don't give good reviews this card reader. It seems that this card reader costs less than $5,00 USD, it might not be very good at this price there.

  Since it is a USB plug, no driver should be necessary that the drivers already installed for the USB ports, which would be included in the chipset driver package.

  Wb2001 suggested, the best way to download pictures from a camera would be via a USB cable connected from the camera and connected to a USB port on the computer.

  I suggest looking for a compatible USB cable for Canon camera, which would connect to the USB port on your computer. It would be the best and fastest in the long term.

• After my last update to Vista, my usb and slot for cf card readers were not mapped. I need to access. Difficulty?

  I updated Vista Friday, 11/09/2011 with KB2533523, KB2468871 and KB2310138.  After the update, I lost my backup drive Seagate mapping and my maxtor drive and card slots on the front of the desktop computer.  Tried running the fixit Center and it crashed.  I can still get to my CF card of the Canon camera via USB connection software - is not acceptable.

  Hello

  I would say you can place the computer in a clean boot state and then try to install the updates that to and check if it helps.

  Note: after the installation of each update to restart the computer, so that we can confirm which updates is causing the problem.

  How to solve the problem by running the clean boot in Windows 7:
  http://support.Microsoft.com/kb/929135 Note: once you have completed troubleshooting, perform the steps in the step 7: to reset the computer as usual

  Hope the information is useful.

• Card readers media M9000T sees is not in Windows 7

  Hello

  I hope someone might have any idea of what is happening with a PC that I bought and used.

  It's a HP Pavilion M9000T, with windows 7 installed.   Everything on it works, except for the internal multi card reader.

  When starting the machine, it performs a check in the bios screen and see all the 4 locations.   But when it starts with windows, it does not see it.

  I went into Device Manager, and I don't see anything there.

  I don't know what is happening.

  Someone at - he of the troubleshooting tips that I could perform, I opened it to the top and all the cables seem to be connected on.

  This has nothing to do with HP. That has to do with the hardware and the operating system. Some just hardware won't work on newer operating systems. Just look around forums for those who have upgraded from Windows 7 to Windows 8. HP released an a press showing when release the last day a computer/laptop could be bought before he would not be supported by Windows 8, and there would be no new drivers available for this purpose. They did the same thing when 7 is out and it goes the same for Vista. When a new operating system is about to come out, they even place stickers on it, letting you know whether or not is is compatible or not. It isn't just HP, no matter WHAT brand of computer will lose eventually supported with the new operating system, due to hardware restrictions. HP does not have the material. HP does not have Windows. HP brings together these two components and makes their job. A new version of Windows ever released 3 years about and in the world of the components of computer... much flexible materials in 3 years.

  Since it is a desktop PC, it is very possible that the person you bought the computer, purchased this component and put it in the computer themselves.

  Here is a link to the list of drivers for Windows Vista and this computer:

  http://h10025.www1.HP.com/ewfrf/wc/softwareCategory?OS=2093&LC=en&cc=us&DLC=en&sw_lang=&product=3629325#N624

  However, there is no mention of a card reader.

• BC and credit card readers

  I'm trying to integrate a simple player credit card in BC's e-commerce system to fill in the name of card number, expiry, etc, fields.  All solutions?  I've seen a solution since last year that might work.  I was wondering if there has been updates. -Thank you

  BC does not store credit card details. BC holds a level 1 PCI compliance, so they do not store this information in the CRM. If you create custom fields to do I don't think BC would like that a lot and certainly for this site, you cannot validate it as a compatible level 1 PCI.

• Cant' network with VPN card readers

  Hello!

  Here at my company in recent weeks, that some problems came with somes user not being able to access the network through the VPN connection drives.

  If I delete all network drives and try to map them in the normal way (Tools > map network drive) I get a "extended error has occurred", but if I force using the "connect using a different user name" and putting the user domain\username and password of the person using the computer, it maps the network drive without problem... until the next reboot.

  So, I repeat it, everywhere.

  There is no password stored in the password manager Windows.
  I remove from the registry, the keys to MapPointings2.

  Can someone help me?

  They are all WinXp.

  Thank you!

  Hello

  The question you have posted is related to Technet and would be better suited to the Technet community. Please visit the link below to find a community that will provide the best support.
  http://social.technet.Microsoft.com/forums/en-us/w7itpronetworking/threads