Cant' network with VPN card readers

Similar Questions

• C6280, win7 cannot print via active network with VPN

  Hi, I have 2 PCs, one Vista, one on Win7. With Vista, I can print over the network.

  Also, via USB on the win7 PC I can print.

  But I can't print via active on the Win7 with VPN network. Without VPN, it works.

  I had several problems with the installation of the SW. Finally it worked (I think I had to turn my VPN connection)

  It recognizes the printer, the State says: ready, but when I print, I get an error after a while.

  When I stop the VPN, I can print.

  I tried to load the patch for Win 7 (recommended on HP circuit (printer disappears), but what it says that I don't have the SW right?)

  any idea?

  Hi ReneH,

  I am pleased to hear that the problem has been resolved. Have a wonderful day.

• PIX501 customer VPN - cannot access inside the network with VPN Session

  What follows is based on the config on the attached link:

  http://www.Cisco.com/en/us/Partner/Tech/tk583/TK372/technologies_configuration_example09186a008009442e.shtml

  PIX Ver 6.2 (3) - VPN Client 3.3.6(A) - Windows XP Client PC

  We can establish the VPN to the PIX501 session, but we cannot access the network private behind the pix.

  Here is the config - I can't determine why it does not work, we are desperate to get there as soon as POSSIBLE!

  We have the same problem with the customer 4.0.3(c)

  Thanks in advance for any help!

  =======================================

  AKCPIX00 # sh run

  : Saved

  :

  6.2 (3) version PIX

  ethernet0 nameif outside security0

  nameif ethernet1 inside the security100

  hostname AKCPIX00

  domain.com domain name

  fixup protocol ftp 21

  fixup protocol http 80

  fixup protocol h323 h225 1720

  fixup protocol h323 ras 1718-1719

  fixup protocol they 389

  fixup protocol rsh 514

  fixup protocol rtsp 554

  fixup protocol smtp 25

  fixup protocol sqlnet 1521

  fixup protocol sip 5060

  fixup protocol 2000 skinny

  fixup protocol sip udp 5060

  names of

  access-list 101 permit ip 192.168.1.0 255.255.255.0 10.0.0.0 255.255.255.0

  pager lines 24

  interface ethernet0 10baset

  interface ethernet1 10full

  Outside 1500 MTU

  Within 1500 MTU

  external IP address #. #. #. # 255.255.240.0

  IP address inside 192.168.1.5 255.255.255.0

  alarm action IP verification of information

  alarm action attack IP audit

  IP local pool akcpool 10.0.0.1 - 10.0.0.10

  history of PDM activate

  ARP timeout 14400

  Global 1 interface (outside)

  (Inside) NAT 0-list of access 101

  NAT (inside) 1 0.0.0.0 0.0.0.0 0 0

  Route outside 0.0.0.0 0.0.0.0 #. #. #. # 1

  Timeout xlate 03:00

  Timeout conn 01:00 half-closed 0: 10:00 udp 0:02:00 CPP 0: h323 from 10:00 0:05:00 sip 0:30:00 sip_media 0:02:00

  Timeout, uauth 0:05:00 absolute

  GANYMEDE + Protocol Ganymede + AAA-server

  RADIUS Protocol RADIUS AAA server

  AAA-server local LOCAL Protocol

  the ssh LOCAL console AAA authentication

  No snmp server location

  No snmp Server contact

  SNMP-Server Community public

  No trap to activate snmp Server

  enable floodguard

  Permitted connection ipsec sysopt

  No sysopt route dnat

  Crypto ipsec transform-set esp - esp-md5-hmac RIGHT

  Crypto-map dynamic dynmap 10 transform-set RIGHT

  map mymap 10-isakmp ipsec crypto dynamic dynmap

  mymap outside crypto map interface

  ISAKMP allows outside

  part of pre authentication ISAKMP policy 10

  encryption of ISAKMP policy 10

  ISAKMP policy 10 md5 hash

  10 2 ISAKMP policy group

  ISAKMP life duration strategy 10 86400

  vpngroup address akcpool pool akcgroup

  vpngroup dns 192.168.1.10 Server akcgroup

  vpngroup akcgroup by default-domain domain.com

  vpngroup split tunnel 101 akcgroup

  vpngroup idle 1800 akcgroup-time

  vpngroup password akcgroup *.

  vpngroup idle 1800 akc-time

  Telnet timeout 5

  SSH #. #. #. # 255.255.255.255 outside

  SSH timeout 15

  dhcpd address 192.168.1.100 - 192.168.1.130 inside

  dhcpd dns 192.168.1.10

  dhcpd lease 3600

  dhcpd ping_timeout 750

  dhcpd allow inside

  Terminal width 80

  Cryptochecksum:XXXXX

  : end

  AKCPIX00 #.

  Config looks good - just as domestic mine to my local network. The only thing I can think is that you may have entered commands in the wrong order - which means, you could have isakmp or encryption before the config map was complete. Write memory, then reloading the pix is a way to reset everything. If you do not want downtime:

  mymap outside crypto map interface

  ISAKMP allows outside

  Enter these two commands should be enough to reset the ipsec and isakmp.

• Cannot share the internet connection on the network with sprint card

  Hi all

  I'm stumped on this one. I'm working on my network of fathers, and he lives in a rural area. Unfourantely, there are not a lot of internet service here. It uses a printed card that connect locally to a windos vista home pc. From there on, the connection is shared and that the pc is connected to a linksys router. The router, then hosts a wireless network and hard line connections. About three weeks ago, the Internet stopped working except the computer, map of sprint is hung directly. I tried the following options below to solve the problem.

  1. I can plug the card sprint to any computer and it works.

  2. I replaced the network adapter on the host computer

  3. I have tried the card sprint on other computers and tried to share from there. Same result

  4. replace the router

  5 opportunity anotehr card Sprint which has been known to work

  6. replace the network cable between pc and router

  7. I tried removing the router from the equation and ran a network of host pc card form for directly to another computer

  8. the host and also renovated of other computers reformated

  9. do you have an ipconfig/release and renew

  10 tried sharing all NICs on the host PC

  When sharing the connection, I can see all the computers on the network. They arise, there is simply not an internet connection.

  The only mistake that I seem to get is not able to find the DNS. I put everything on dhcp.

  Any ideas that anyone can come would be most appreciated. Thank you

  Hello

  Step 01:

  I suggest you follow the same steps as expected here to set up the ICS (Internet Connection Sharing) host computer:
  http://Windows.Microsoft.com/en-us/Windows-Vista/set-up-a-shared-Internet-connection-using-ICS-Internet-connection-sharing

  Step 02:

  I also suggest you to follow the link and check.

  http://Windows.Microsoft.com/en-us/Windows-Vista/change-Internet-settings-for-ICS-Internet-connection-sharing

  For more information, please follow the link.

  http://Windows.Microsoft.com/en-us/Windows-Vista/using-ICS-Internet-connection-sharing

• Unable to access the local network with VPN with some ISPS

  Hello

  We have a VPN Remote Access IPSEC with an ASA5505. Install VPN it correctly but can not access the inside or the ASA to my office.

  But at home with another Internet service provider, it works! You can access inside.

  We are trying with other ISP and it works with 2 and does not work with the other 2!

  Office we also have an ASA5505, but we have another VPN other sites that work properly.

  Any ideas?

  Thank you and sorry for my English.

  Add...

  ISAKMP nat-traversal crypto

  That should do the trick! Please rate if this can help.

• Network with UMTS card on host bridge

  Hello

  I'm testing the latest vmware workstation on windows xp sp3. The guest operating system is win xp sp3. To connect my host to the internet, I use my UMTS card. For the comment system, I need network bridge due to a separate IP address in the guest computer. After starting the virtual machine (my host is to connect to the internet via my UMTS card, I get the message: "the network interface on the VMNet0 device is dow because the bridged Ethernet Interface is...) ». If I connect my host via a cable network or WIFI to internet, everything works fine.

  How is it possible to connect my system of comments through 'bridge' to the internet?

  Thank you

  Joerg

  I don't know if I understand your problem. Your host is connected via UMTS and receives a public ip address. You try to connect to your comments via the bridge, which means also there need a public ip address, but UMTS only serve one of them (this is normal). Therefore, you must use NAT for your comments, so that your host and your guest use the same public ip address.

• vSphere network configuration 5 with 10 cards and two physical HP switches

  We will deploy our first vSphere servers 5 with 10 network adapters in each host ESX 4 and I have questions about how to best configure the network.

  All the guests have 10 cards 1 GB

  My first thought was to build 4 vswitches

  vSwitch0:

  Networking VLAN10

  VM Network VLAN10

  physical vmnic0 + vmnic1 in switch1

  vmnic6 + vmnic7 to the physical switch2

  vswitch1:

  DMZ VLAN20

  vmnic2 to physical switch1

  vmnic8 to the physical switch2

  vswitch2:

  vMotion

  vmnic4 to a dedicated switch vmotion

  vswitch3:

  Network with NFS for the Veeam VLAN30 backup

  vmnic3 to physical switch1

  vmnic9 to the physical switch2

  Now my questions.

  Are there design improvements? What can I do better?

  Configuratoin physical switch:

  I need to configure an etherchannel between the NIC, vmnic0, 1, 6 7 and change the route based on the IP hash strategy?

  Can I put the vswitch0 reserve and with active NIC or should I use the cards in Active state?

  If it is better to work with intelligence and active cards change in sleep mode?

  Thank you for your help

  concerning

  Dennis

  Hello

  I would like to do something like that, see attachment

  vMotion and mgmt in a vSwitch with approach active\standby - vLAN trunking should be done on the port of pSwitch

  DMZ on two vmnic active/active

  VM_LAN - vmnic on 4 all active

  Backup - 2 vmincs - active/active

  All critical (Mgmt) vMotion, VM_LAN and DMZ networks are redundant (split between 2 quad port adapter) + backup flowing over built-in LAN adapter

  No channel of the ether - I have never seen saturated by VM - here traffic network so you have 4 vmnic works perfectly

  

  See you soon
  Artur
  

  Please, do not forget the points of call of the "useful" or "correct" answers

• C168i: unlocked from at & t, but unable to connect to the network with the new SIM card

  I brought my c168i from the USA and I can't use it in my home country. I unlocked the phone to at & t, but it connects to the local network with the new SIM in there. It shows "not available" or "no service". What is going on??

  If you look at Australia GSM worldwide site, you will see which bands are available in your area. If the bands including the phone does not match the country you are located in the phone up with will not get service. Not all bands are available in all areas. In my view, that the phone only has GSM 850/1900 GPRS. This would mean that you get only service when GSM 850 is available that I don't see 1900 in Australia.

  Mark

  Support Forums Manager

• Problem with VPN

  I have two problems with IPSEC VPN, using the cisco client, and a third, which I think could answer here if this isn't strictly associated with VPN.

  1. cannot access the internet, while VPN is in place. This can be a problem of client as I * think * I've split tunneling to install correctly.

  2. cannot access other networks except the network associated with the inside interface natively.

  3. I can not ping to the internet from inside, be it on the VPN or not.

  I tend to use the SMDA; Please, if possible, keep the answer to this kindof of entry.

  Here is the config:

  Output of the command: "sh run".

  : Saved

  :

  ASA Version 8.4 (1)

  !

  hostname BVGW

  domain blueVector.com

  activate qWxO.XjLGf3hYkQ1 encrypted password

  2KFQnbNIdI.2KYOU encrypted passwd

  names of

  !

  interface Ethernet0/0

  nameif outside

  security-level 10

  IP 5.29.79.10 255.255.255.248

  !

  interface Ethernet0/1

  nameif inside

  security-level 100

  IP 172.17.1.2 255.255.255.0

  !

  interface Ethernet0/2

  Shutdown

  No nameif

  no level of security

  no ip address

  !

  interface Ethernet0/3

  Shutdown

  No nameif

  no level of security

  no ip address

  !

  interface Management0/0

  nameif management

  security-level 100

  IP 172.19.1.1 255.255.255.0

  management only

  !

  passive FTP mode

  DNS server-group DefaultDNS

  domain blueVector.com

  permit same-security-traffic inter-interface

  permit same-security-traffic intra-interface

  the subject of WiFi network

  172.17.100.0 subnet 255.255.255.0

  WiFi description

  the object to the Interior-net network

  172.17.1.0 subnet 255.255.255.0

  network of the NOSPAM object

  Home 172.17.1.60

  network of the BH2 object

  Home 172.17.1.60

  the EX2 object network

  Home 172.17.1.61

  Description internal Exchange / SMTP outgoing

  the Mail2 object network

  Home 5.29.79.11

  Description Ext EX2

  network of the NETWORK_OBJ_172.17.1.240_28 object

  subnet 172.17.1.240 255.255.255.240

  network of the NETWORK_OBJ_172.17.200.0_24 object

  172.17.200.0 subnet 255.255.255.0

  DM_INLINE_TCP_1 tcp service object-group

  port-object eq www

  EQ object of the https port

  the DM_INLINE_NETWORK_1 object-group network

  network-object BH2

  network-object NOSPAM

  Outside_access_in list extended access permit tcp any eq smtp DM_INLINE_NETWORK_1 object-group

  Outside_access_in list extended access permit tcp any object object-group DM_INLINE_TCP_1 BH2

  pager lines 24

  Enable logging

  asdm of logging of information

  Outside 1500 MTU

  Within 1500 MTU

  management of MTU 1500

  mask pool local 172.17.1.240 - 172.17.1.250 VPN IP 255.255.255.0

  mask pool local 172.17.200.100 - 172.17.200.200 VPN2 IP 255.255.255.0

  no failover

  ICMP unreachable rate-limit 1 burst-size 1

  don't allow no asdm history

  ARP timeout 14400

  NAT (inside, outside) static source EX2 Mail2

  NAT (inside, outside) static source all all NETWORK_OBJ_172.17.1.240_28 of NETWORK_OBJ_172.17.1.240_28 static destination

  NAT (inside, outside) static source all all NETWORK_OBJ_172.17.200.0_24 of NETWORK_OBJ_172.17.200.0_24 static destination

  NAT (inside, outside) static source to the Interior-NET Interior-net destination static NETWORK_OBJ_172.17.1.240_28 NETWORK_OBJ_172.17.1.240_28

  !

  the object to the Interior-net network

  NAT (inside, outside) dynamic interface

  network of the NOSPAM object

  NAT (inside, outside) static 5.29.79.12

  Access-group Outside_access_in in interface outside

  Route outside 0.0.0.0 0.0.0.0 5.29.79.9 1

  Route inside 10.2.0.0 255.255.255.0 172.17.1.1 1

  Route inside 10.3.0.0 255.255.255.128 172.17.1.1 1

  Route inside 10.10.10.0 255.255.255.0 172.17.1.1 1

  Route inside 172.17.100.0 255.255.255.0 172.17.1.3 1

  Route inside 172.18.1.0 255.255.255.0 172.17.1.1 1

  Route inside 192.168.1.0 255.255.255.0 172.17.1.1 1

  Route inside 192.168.11.0 255.255.255.0 172.17.1.1 1

  Route inside 192.168.30.0 255.255.255.0 172.17.1.1 1

  Timeout xlate 03:00

  Timeout conn 01:00 half-closed 0:10:00 udp 0:02:00 icmp 0:00:02

  Sunrpc timeout 0:10:00 h323 0:05:00 h225 mgcp from 01:00 0:05:00 mgcp-pat 0:05:00

  Sip timeout 0:30:00 sip_media 0:02:00 prompt Protocol sip-0: 03:00 sip - disconnect 0:02:00

  Timeout sip-provisional-media 0:02:00 uauth 0:05:00 absolute

  timeout tcp-proxy-reassembly 0:01:00

  dynamic-access-policy-registration DfltAccessPolicy

  AAA-server blueVec protocol ldap

  blueVec AAA-server (inside) host 172.17.1.41

  LDAP-base-dn DC = adrs1, DC = net

  LDAP-group-base-dn DC = EIM, DC = net

  LDAP-scope subtree

  LDAP-naming-attribute sAMAccountName

  LDAP-login-password *.

  LDAP-connection-dn CN = Hanna\, Roger, OU = human, or = WPLAdministrator, DC = adrs1, DC = net

  microsoft server type

  Enable http server

  http 192.168.1.0 255.255.255.0 management

  http 172.17.1.0 255.255.255.0 inside

  http 24.32.208.223 255.255.255.255 outside

  No snmp server location

  No snmp Server contact

  Server enable SNMP traps snmp authentication linkup, linkdown warmstart of cold start

  Crypto ipsec transform-set ikev1 ESP-AES-256-MD5 esp-aes-256 esp-md5-hmac

  Crypto ipsec transform-set ikev1 ESP-DES-SHA esp - esp-sha-hmac

  Crypto ipsec transform-set ikev1 esp ESP-DES-MD5-esp-md5-hmac

  Crypto ipsec transform-set ikev1 ESP-AES-192-MD5 esp-aes-192 esp-md5-hmac

  Crypto ipsec transform-set ikev1 ESP-3DES-MD5-esp-3des esp-md5-hmac

  Crypto ipsec transform-set ikev1 ESP-AES-256-SHA esp-aes-256 esp-sha-hmac

  Crypto ipsec transform-set ikev1 ESP-AES-128-SHA aes - esp esp-sha-hmac

  Crypto ipsec transform-set ikev1 ESP-AES-192-SHA esp-aes-192 esp-sha-hmac

  Crypto ipsec transform-set ikev1 ESP-AES-128-MD5-esp - aes esp-md5-hmac

  Crypto ipsec transform-set ikev1 SHA-ESP-3DES esp-3des esp-sha-hmac

  crypto dynamic-map SYSTEM_DEFAULT_CRYPTO_MAP 65535 define ikev1 transform-set ESP-AES-128-SHA ESP-AES-128-MD5 ESP-AES-192-SHA ESP-AES-192-MD5 ESP-AES-256-SHA ESP-AES-256-MD5 ESP-3DES-SHA MD5-ESP-3DES ESP-DES-SHA ESP-DES-MD5

  card crypto Outside_map 65535-isakmp dynamic ipsec SYSTEM_DEFAULT_CRYPTO_MAP

  Outside_map interface card crypto outside

  Crypto ikev1 allow outside

  IKEv1 crypto policy 10

  preshared authentication

  3des encryption

  sha hash

  Group 2

  life 86400

  IKEv1 crypto policy 30

  authentication crack

  3des encryption

  sha hash

  Group 2

  life 86400

  Telnet timeout 5

  SSH 172.17.1.0 255.255.255.0 inside

  SSH timeout 5

  Console timeout 0

  dhcpd address 172.17.1.100 - 172.17.1.200 inside

  dhcpd 4.2.2.2 dns 8.8.8.8 interface inside

  dhcpd lease interface 100000 inside

  dhcpd adrs1.net area inside interface

  !

  a basic threat threat detection

  threat detection statistics

  a statistical threat detection tcp-interception rate-interval 30 burst-400-rate average rate 200

  WebVPN

  internal blueV group policy

  attributes of the strategy of group blueV

  value of server WINS 172.17.1.41

  value of 172.17.1.41 DNS server 172.17.1.42

  Ikev1 VPN-tunnel-Protocol

  value by default-field ADRS1.NET

  internal blueV_1 group policy

  attributes of the strategy of group blueV_1

  value of server WINS 172.17.1.41

  value of 172.17.1.41 DNS server 172.17.1.42

  Ikev1 VPN-tunnel-Protocol

  Split-tunnel-policy tunnelspecified

  adrs1.NET value by default-field

  username gwhitten encrypted password privilege 0 8fLfC1TTV35zytjA

  username gwhitten attributes

  VPN-group-policy blueV

  rparker encrypted FnbvAdOZxk4r40E5 privilege 15 password username

  attributes of username rparker

  VPN-group-policy blueV

  username mhale encrypted password privilege 0 2reWKpsLC5em3o1P

  username mhale attributes

  VPN-group-policy blueV

  VpnUser2 SlHbkDWqPQLgylxJ encrypted privilege 0 username password

  username VpnUser2 attributes

  VPN-group-policy blueV

  Vpnuser3 R6zHxBM9chjqBPHl encrypted privilege 0 username password

  username Vpnuser3 attributes

  VPN-group-policy blueV

  username VpnUser1 encrypted password privilege 0 mLHXwxsjJEIziFgb

  username VpnUser1 attributes

  VPN-group-policy blueV

  username dcoletto encrypted password privilege 0 g53yRiEqpcYkSyYS

  username dcoletto attributes

  VPN-group-policy blueV

  username, password jmcleod aSV6RHsq7Wn/YJ7X encrypted privilege 0

  username jmcleod attributes

  VPN-group-policy blueV

  rhanna encrypted Pd3E3vqnGmV84Ds2 privilege 15 password username

  rhanna attributes username

  VPN-group-policy blueV

  username rheimann encrypted password privilege 0 tHH5ZYDXJ0qKyxnk

  username rheimann attributes

  VPN-group-policy blueV

  username jwoosley encrypted password privilege 0 yBOc8ubzzbeBXmuo

  username jwoosley attributes

  VPN-group-policy blueV

  2DBQVSUbfTBuxC8u encrypted password privilege 0 kdavis username

  kdavis username attributes

  VPN-group-policy blueV

  username mbell encrypted password privilege 0 adskOOsnVPnw6eJD

  username mbell attributes

  VPN-group-policy blueV

  bmiller dpqK9cKk50J7TuPN encrypted password privilege 0 username

  bmiller username attributes

  VPN-group-policy blueV

  type tunnel-group blueV remote access

  tunnel-group blueV General-attributes

  address VPN2 pool

  authentication-server-group blueVec

  Group Policy - by default-blueV_1

  blueV group of tunnel ipsec-attributes

  IKEv1 pre-shablue-key *.

  !

  class-map inspection_default

  match default-inspection-traffic

  !

  !

  type of policy-card inspect dns preset_dns_map

  parameters

  maximum message length automatic of customer

  message-length maximum 512

  Policy-map global_policy

  class inspection_default

  inspect the preset_dns_map dns

  inspect the ftp

  inspect h323 h225

  inspect the h323 ras

  inspect the rsh

  inspect the rtsp

  inspect esmtp

  inspect sqlnet

  inspect the skinny

  inspect sunrpc

  inspect xdmcp

  inspect the sip

  inspect the netbios

  inspect the tftp

  Review the ip options

  !

  global service-policy global_policy

  context of prompt hostname

  call-home

  Profile of CiscoTAC-1

  no active account

  http https://tools.cisco.com/its/service/oddce/services/DDCEService destination address

  email address of destination [email protected] / * /

  destination-mode http transport

  Subscribe to alert-group diagnosis

  Subscribe to alert-group environment

  Subscribe to alert-group monthly periodic inventory

  monthly periodicals to subscribe to alert-group configuration

  daily periodic subscribe to alert-group telemetry

  HPM topN enable

  Cryptochecksum:2491a825fb8a81439a6c80288f33818e

  : end

  Any help is appreciated!

  -Roger

  Hey,.

  Unfortunately, I do not use ASDM myself but will always mention things that could be done.

  You do not split tunneling. All traffic either tunnel to the ASA, while VPN is active

  You have the following line under the "group policy"

  Split-tunnel-policy tunnelspecified

  You will also need this line

  Split-tunnel-network-list value

  Defines the destination for the VPN Client networks. If you go in on the side of the ASDM group policy settings, you should see that no ACL is selected. You don't really seem to have an ACL in the configuration above, for the split tunneling?

  To activate access Internet via the VPN Client now in the current configuration, I would say the following configuration of NAT

  VPN-CLIENT-PAT-SOURCE network object-group

  object-network 172.17.200.0 255.255.255.0

  NAT (outside, outdoor) automatic interface after dynamic source VPN-CLIENT-PAT-SOURCE

  In regards to the traffic does not for other networks, I'm not really sure. I guess they aren't hitting the rule NAT that are configured. I think they should, but I guess they aren't because its does not work

  I could myself try the following configuration of NAT

  object-group, network LAN-NETWORKS

  object-network 10.2.0.0 255.255.255.0

  object-network 10.3.0.0 255.255.255.128

  object-network 10.10.10.0 255.255.255.0

  object-network 172.17.100.0 255.255.255.0

  object-network 172.18.1.0 255.255.255.0

  object-network 192.168.1.0 255.255.255.0

  object-network 192.168.11.0 255.255.255.0

  object-network 192.168.30.0 255.255.255.0

  object-group, network VPN-POOL

  object-network 172.17.200.0 255.255.255.0

  NAT (inside, outside) static static source of destination LAN-LAN-NETWORK VPN-VPN-POOL

  Add ICMP ICMP Inspection

  Policy-map global_policy

  class inspection_default

  inspect the icmp

  or alternatively

  fixup protocol icmp

  This will allow automatically response to ICMP echo messages pass through the firewall. I assume that they are is blocked by the firewall now since you did not previously enable ICMP Inspection.

  -Jouni

• Create different group with VPN remote access

  Hello world

  The last time, I ve put in place a VPN for remote access to my network with ASA 5510

  I ve access to all my internal LAn helped with my VPN

  But I want to set up a vpn group in the CLI for a different group of the user who accesses the different server or a different network on my local network.

  Example: computer group - access to 10.70.5.X network

  Group consultant network - access to 10.70.10.X

  I need to know how I can do this, and if you can give me some example script to complete this

  Here is my configuration:

  ASA Version 8.0 (2)
  !
  ASA-Vidrul host name
  vidrul domain name - ao.com
  activate 8Ry2YjIyt7RRXU24 encrypted password
  names of
  DNS-guard
  !
  interface Ethernet0/0
  nameif outside
  security-level 0
  address IP X.X.X.X 255.255.255.X
  !
  interface Ethernet0/1
  nameif inside
  security-level 100
  address IP X.X.X.X 255.255.255.X
  !
  interface Ethernet0/2
  Shutdown
  No nameif
  no level of security
  no ip address
  !
  interface Ethernet0/3
  Shutdown
  No nameif
  no level of security
  no ip address
  !
  interface Management0/0
  Description Port_Device_Management
  nameif management
  security-level 99
  address IP X.X.X.X 255.255.255.X
  management only
  !
  2KFQnbNIdI.2KYOU encrypted passwd
  passive FTP mode
  DNS server-group DefaultDNS
  vidrul domain name - ao.com
  access-list 100 scope ip allow a whole
  access-list extended 100 permit icmp any any echo
  access-list extended 100 permit icmp any any echo response
  vpn-vidrul_splitTunnelAcl permit 10.70.1.0 access list standard 255.255.255.0
  vpn-vidrul_splitTunnelAcl permit 10.70.99.0 access list standard 255.255.255.0
  inside_nat0_outbound list of allowed ip extended access all 10.70.255.0 255.255.255.0
  pager lines 24
  Outside 1500 MTU
  Within 1500 MTU
  MTU 1500 management
  IP local pool clientvpngroup 10.70.255.100 - 10.70.255.200 mask 255.255.255.0
  ICMP unreachable rate-limit 1 burst-size 1
  ASDM image disk0: / asdm - 602.bin
  don't allow no asdm history
  ARP timeout 14400
  Global 1 interface (outside)
  NAT (inside) 0-list of access inside_nat0_outbound
  NAT (inside) 1 10.70.0.0 255.255.0.0
  Access-group 100 in the interface inside
  Access-group 100 interface inside

  Timeout xlate 03:00
  Timeout conn 01:00 half-closed 0:10:00 udp 0:02:00 icmp 0:00:02
  Sunrpc timeout 0:10:00 h323 0:05:00 h225 mgcp from 01:00 0:05:00 mgcp-pat 0:05:00
  Sip timeout 0:30:00 sip_media 0:02:00 prompt Protocol sip-0: 03:00 sip - disconnect 0:02:00
  Timeout, uauth 0:05:00 absolute
  dynamic-access-policy-registration DfltAccessPolicy
  Protocol RADIUS AAA-server 10.70.99.10
  AAA authentication enable LOCAL console
  the ssh LOCAL console AAA authentication
  LOCAL AAA authorization command
  Enable http server
  http 192.168.1.2 255.255.255.255 management
  No snmp server location
  No snmp Server contact
  Server enable SNMP traps snmp authentication linkup, linkdown cold start
  Crypto ipsec transform-set ESP-DES-MD5 esp - esp-md5-hmac
  Crypto ipsec transform-set ESP-DES-SHA esp - esp-sha-hmac
  Dynamic crypto map SYSTEM_DEFAULT_CRYPTO_MAP 65535 set pfs
  SYSTEM_DEFAULT_CRYPTO_MAP game 65535 dynamic-map crypto transform-set ESP-DES-SHA ESP-DES-MD5
  outside_map card crypto 65535-isakmp dynamic ipsec SYSTEM_DEFAULT_CRYPTO_MAP
  outside_map interface card crypto outside
  crypto ISAKMP allow outside
  crypto ISAKMP policy 10
  preshared authentication
  the Encryption
  md5 hash
  Group 2
  life 86400
  Crypto isakmp nat-traversal 30
  Telnet 0.0.0.0 0.0.0.0 inside
  Telnet timeout 5
  SSH 0.0.0.0 0.0.0.0 outdoors
  SSH timeout 5
  Console timeout 0
  outside access management
  dhcpd manage 192.168.1.2 - 192.168.1.5
  dhcpd enable management
  !
  a basic threat threat detection
  Statistics-list of access threat detection
  !
  class-map inspection_default
  match default-inspection-traffic
  block-url-class of the class-map
  class-map imblock
  match any
  class-map P2P
  game port tcp eq www
  !
  !
  type of policy-card inspect dns migrated_dns_map_1
  parameters
  message-length maximum 512
  Policy-map global_policy
  class inspection_default
  inspect the migrated_dns_map_1 dns
  inspect the ftp
  inspect h323 h225
  inspect the h323 ras
  inspect the netbios
  inspect the rsh
  inspect the rtsp
  inspect the skinny
  inspect esmtp
  inspect sqlnet
  inspect sunrpc
  inspect the tftp
  inspect the sip
  inspect xdmcp
  Policy-map IM_P2P
  class imblock
  class P2P
  !
  global service-policy global_policy
  vpn-vidrul group policy internal
  vpn-vidrul group policy attributes
  Protocol-tunnel-VPN IPSec
  Split-tunnel-policy tunnelspecified
  Split-tunnel-network-list value vpn-vidrul_splitTunnelAcl
  value by default-field vidrul - ao.com
  test 274Y4GRAbNElaCoV of encrypted password privilege 0 username
  username admin privilege 15 encrypted password bTpUzgLxalekyhxQ
  attributes of user admin name
  Strategy-Group-VPN-vpn-vidrul
  username, password suporte zjQEaX/fm0NjEp4k encrypted privilege 15
  type tunnel-group vidrul-vpn remote access
  vpn-vidrul general-attributes tunnel-group
  address clientvpngroup pool
  Group Policy - by default-vpn-vidrul
  IPSec-vpn-vidrul tunnel group attributes
  pre-shared-key *.
  context of prompt hostname
  Cryptochecksum:d84e64c87cc5b263c84567e22400591c
  : end

  What you need to configure is to imitate the configuration on the tunnel-group and group strategy and to configure access to specific network you need.

  Currently, you have configured the following:

  vpn-vidrul group policy internal
  vpn-vidrul group policy attributes
  Protocol-tunnel-VPN IPSec
  Split-tunnel-policy tunnelspecified
  Split-tunnel-network-list value vpn-vidrul_splitTunnelAcl
  value by default-field vidrul - ao.com

  type tunnel-group vidrul-vpn remote access
  vpn-vidrul general-attributes tunnel-group
  address clientvpngroup pool
  Group Policy - by default-vpn-vidrul
  IPSec-vpn-vidrul tunnel group attributes
  pre-shared-key *.

  What you need is to create new group policy and the new tunnel-group and configure the tunnel split ACL to allow access to specific access required.

  The user must then connect with the new group name and the new pre-shared key (password).

  Hope that helps.

• Drive mapping shared with VPN access

  I'm the only person in our company (small) with a Mac and I work remotely. I consulted my company using Network Connect VPN successfully.

  I'm now trying to map the shared drive.

  Under "OK" > "Connect to Server" I entered the address of the server ("smb: / /...") (' etc.) because it has been given to me. When I click on connect I get an error "there was a problem connecting to the server '[server address]'. The server may not exist or it is not available at this time. Check the server name or IP address, check your network connection and then try again. »

  I tried a number of variations of the server address - none worked.

  In the Finder, under the heading "Shared Disks", all I can see is an empty folder "servers".

  When I'm on wifi office internal society, we were able to map the drive. But nothing has worked so far not remotely, remotely.

  Can anyone suggest a solution?

  I solved my problem. I needed to use the IP address of the server, not the full smb: / / URL etc.

• Card readers do not show in the COMPUTER after the installation of EM718AA

  I installed the EM718AA on a xw6600 running Windows 7 Professional. Shows Device Manager all slots for cards 'work properly' but none of the card readers appear in the screen of the COMPUTER. Similarly, media does not show whn plugged into slots.

  Installing the card was not easy, with an appearance of a 'blue screen of death', but the installation seems to resolve itself during a reboot... until I saw the lack of icons of map on the screen of the COMPUTER.

  Any thoughts?

  THX

  The list herewas abandoned in 2012. It supports OS was not WIN7.

  That said, have you tried the cable directly to a USB connector on the motherboard?

• Satellite M40X: Network collapsed - Lan card broken?

  Hello
  I have a problem with my Toshiba Satellite M40X.
  I used a regular LAN and he collapsed suddenly. Now, only a 10mBitconnector is spotted, but the work of doesn´t, the isn´t of connector 100mBit even spotted. All of the settings on the network are the same. Nothing has changed. They are always accurate. No ping goes out. the local network is not accessible. But W - Lan works.

  Is it possible that my network card is broken? Y at - it a shortcut to disable the network card? Maybe I used it accidentally... A possibility exists to check if the network adapter is down or off?

  Thanks for the help...

  Hello

  Please check device manager if the card is correctly recognized. Also if you see a yellow exclamation point there so something wrong with the card or the driver.
  You can try to reinstall the LAN driver, maybe it helps. But if the driver installation doesn t help so it must be something wrong with the card material.

• Question about WPA with lan card wireless in a Satellite Pro 6100

  Hello world

  I wish toshiba Australia had a cool site like this... It's fantastic.

  In any case, I just buy a kit (PA3189U-1MPC) wireless lan card for my laptop and network connection problems wireless of the University. The tech guy he says I need to have installed a wpa driver, and then I would be set for the use of bandwidth United.

  Anyone know where I can get a newish driver? I can't find anything anywhere...

  Thanks for any help,

  Jonno

  Hello

  First of all, it is very nice to read you like this forum. ;)

  So my friend from Australia, at first I must say that you use right and compatible WLAN card on your older laptop, but now I have to disappoint you. According to the specification, it is not possible to use WPA encryption with this card.

  Really, I don't think you can solve it with the new driver. I have newer computer Tecra laptop and I've tried everything but to no avail. Best solution for you is to use external USB WLAN stick. It will be much better for you. Initially, you can use WPA encryption and with the new card, you can use faster standard G and download speed will be much faster as with integrated WLAN card.

  Maybe you should think about it.

  Bye and good luck!

• Try to pay my subscription to Xbox live with another card, the payment option freezes.

  Original title: freezing payment options

  I'm trying to pay my subscription to Xbox live with another card that the original one was cancelled. When I pay the screen goes to a standby screen and stays there forever. (with the small blue dots going round and round.

  I WAITED 5 hours and nothing happened... !!

  It is not also give me the ability to switch to another card will not let me add another option.

  Help, please.

  Hello

  Your Question is outside the scope of this community, as we have nothing to do with the Xbox...

  I suggest that repost you in the correct forum.

  "Xbox a Preview program FAQ.

  http://support.Xbox.com/en-us/Xbox-one/system/Xbox-update-preview-FAQ

  'Home'

  http://forums.Xbox.com/

  "Xbox forums.

  http://forums.Xbox.com/xbox_forums/general_discussion/f/3817.aspx

  _________________________________________________

  "Xbox Forums directory.

  http://www.Xbox.com/en-us/forums

  General

  • Home/FAQ/Forum policy

  • Community general discussion

  Material & Discussion Services

  • Equipment & Services

  Xbox support
  Agent hours: M - F 09:00-17:00 PT

  • Xbox 360 support

  • Xbox 1 support

  • Xbox on supported mobile devices

  • Xbox on Windows support

  • Networking of hardware information

  • Material information TV

  Law enforcement forums

  • Xbox 360 account Suspensions & Console bans

  • Account Xbox one & measures Console application

  Technical support of Xbox Live rewards
  Xbox Live rewards Squad hours: M - F 09:00-17: 00 PST

  • Xbox Live rewards program announcements

  • Xbox Live rewards Questions

  See you soon.