Multiple instances of energy saving - why?

Similar Questions

• How can I hide/show toolbar again operate independently on multiple instances of firefox?

  I run two instances of firefox.exe. One for the left monitor and one for the right. There is a toolbar that I want to see on the right screen, but I don't want to see it on the left screen. This used never to be a problem, but it is now. It seems as if well now why show/hide toolbars are inextricably linked, and by changing or watching a toolbar on a single instance simultaneously causes the exact change even on the other open instance. I'm hoping that it could be a simple solution to this effect in the subject: config, however, I would rather not tamper with these settings until I'm sure that settings with the fix for this particular problem.

  Thank you for your attention and for taking the time to read this post.

  Sincerely;
  DC

  Toolbar settings are common to all windows open in this instance of Firefox.
  I don't know if there is an extension that allows to fix this dependent window, so you can check the website of modules.
  If you can't find one then you would use a second instance with its own profile.

  You can add - no.-distance to the command line to open another instance of Firefox with its own profile and run multiple instances of Firefox at the same time.

  • http://KB.mozillazine.org/Opening_a_new_instance_of_Firefox_with_another_profile
  • https://developer.Mozilla.org/Mozilla/Multiple_Firefox_Profiles
  • http://KB.mozillazine.org/Using_multiple_profiles_-_Firefox

• my computer keeps going to energy saving mode and TIME off

  each time my computer shuts down I have to turn power on wall to restart it and itgives me 10 minutes and will return to the mode and towers out of energy saving

  Why do you think a problem as it is related to Firefox?

• Energy saving and its fall to stop AGAIN!

  Hello

  My topic was blocked for unexplained reasons. It seems that many other people in this forum and I begin to doubt the quality of your support department. :(

  Here is the link to my (mrbyte) topic:

  http://forums.computers.Toshiba-Europe.com/forums/thread.jspa?threadID=1976&TSTART=30

  My question was energy saving crashing to the stage of the stop. I did not help so far. and no update driver since October 2004! my laptop model is relatively new (bought last August):

  Satellite Pro M30:Centrino / 1.7 GHz/15.4 "TFT-W/60 GB / 256 + 256 MB/DVD-S-MULTI/LAN/Wi-Fi/i.LINK"

  Please... I would appreciate if you could at least ensure that me and other users concerned that another version of the driver for standby power is soon to be released!

  It isn't really the laptop cheaper that I bought, nor it is old. and there certainly should be according to the level of technical support service!

  looking forward to your reply,

  Andrew

  Hi again Andrew!

  I think that this last topic was perhaps a bit too long and difficult to understand and that of why it was closed, but the discussion can continue in this topic. I think that it shouldn't be a problem and I would like to discuss more common subject of Eve, but all first I would ask you to do two things.

  First don t always just copy my words because it simply turns into a lot of text with no beginning and no end and it s too long. I would like that discuss you to accept the other view s of people so mine I have calmly without frustrated because no one is forcing a solution his individual views. It is entirely at you if you want to change something or not.

  It's a good thing that you are a programmer because thanks to this line of work, you get more information about issues that occur when you have conflicts between the programs.

  I have two laptops Toshiba that I use for work and private home. After our last discussion, I have examined carefully the features of saving on both of my books. There are two totally different versions and they both work great on AC or batteries.

  In my opinion, it is the cause of your problem is a conflict and that that of why energy saver cannot end process. I believe that after years of practice in collaboration with computers as you know sometimes BONE without apparent reason starts to behave differently and that, in these cases, the best thing to do is just reinstall OS around and set it up. To avoid these problems, what I do is to make the image of my system using Ghost application.

  Please accept that in your case it is not an error in energy saving because if it was you would experience difficulties with him from the beginning. If it was a mistake that occurs to a few thousand users, that would be a serious mistake, and it would be possible to update from the web.

  I don t want to talk you to do things, but the best option would be to backup your data and reinstall the OS using the recovery CD. I'm sure that after doing so, you will have no more problems. Then, you install the programs you need and use and configure the operating system to meet your needs.

  Sorry if I said just a little too but I would really like solve you that problem and enjoy using your M30 SP.

• Satellite M30-951 - processor clocked at 600 MHz (it must be at 1500) - high energy saving

  Hello

  earlier this year, a company has changed the case of my laptop. Since that time on the laptop was very slow. I thought it has something to do with the software, but after a new installation, the problem was not solved.

  Now, I used severel programs to check the speed of the CPU. Programms all tell me that my CPU Speed is 600 MHz (it must be at 1500 MHz).

  The laptop is connectet to current alternative and energy-saving is high. I did a bios update and spent setting the CPU in the Bios of dynamics to high. But no sollution.

  Then I saw that my fan does not (at the beginning, or when I use Notepad). I thought that his damaged, but I tested it on another laptop and the fan works perfectly with 5V.

  Moreover no program shows me the temprature, so I think the sensor of temprature or anything else is failure, so that the fan does not work and the CPU is at each time at 600 MHz.

  Does anyone have an idea how I can fix this problem or I have to change?

  Thank you very much

  Concerning

  Nassim

  Seems you have tried almost everything that can be done now.
  And I agree with you that there could be something wrong with temperature sensor and this is why I advise you to go to an authorized service provider to verify if this is really the problem.

  Before you do, you could try if the programmable notebook hardware control (NHC) can display the temperature because it is a very good tool. But as you say, no other tool could do this job, I doubt that it can control it. But worth a try.

• Need of energy saving for Satellite L10-102

  Hello

  I want to ask whether it is possible to use a software energy saving with my Satellite L10-102 model?

  I tried software standby of an A55-S306 power but the software checked first is the appropriate model or not and then also failed.
  Where can I find the software of standby power for my laptop? If I can't find so why the other models, but L10 didn't Eve software power?

  Thank you...

  Hello

  You re right. This unit has been delivered without the Toshiba power saver. It uses Microsoft Windows power options.
  I put t know why the energy saver is not designed for this device, but as far as I know it s not possible to use another energy saving that was not designed for this device.
  This software cancels the installation procedure.

• multiple instances of internet explore in my task manager

  Why are there multiple instances of internet explore in my task manager when I open only one page?

  Hello

  IE uses smaller instances of itself to support tabs and correction of errors and it is normal for IE8. In fact
  It uses far fewer resources as well as the opening of 2 or more instances to access several pages. If you
  Open several tabs, and then still more small instances of Internet Explorer will be opened to support these tabs and error correction.

  So basically, everything is normal.

  Multiple Instances of iexplore.exe run when using Internet Explorer 8
  http://www.Winhelponline.com/blog/multiple-instances-of-iexploreexe-run-when-using-Internet-Explorer-8/

  I hope this helps.

  Rob Brown - Microsoft MVP<- profile="" -="" windows="" expert="" -="" consumer="" :="" bicycle=""><- mark="" twain="" said="" it="">

• Question about multiple instances of Thunderbird running at the same time

  I read that when you start Thunderbird by clicking on its icon or the shortcut must only load once, even if you click on it several times. It should be just a window of TB. If I click on the shortcut/TB desktop icon, it behaves like that. I can click several times and that a single TB window will open and be active.

  However, if I run the 'quick launch' TB on my windows 8.1 (or no matter what windows) taskbar, I get mulitple TB windows to open, as much as I want. So if I click on TB icon in the quick launch once, I get a single instance of it. Twice, I get two, and etc. In the quick launch any program behaves like that. He starts programs with a single click and launch again and again.

  Only, I click it once and get an instance which is good and how it should be. But this behavior with the quick launch is ok? It must do this not with Thunderbird? Thank you.

  There is usually no advantage by running multiple instances of Thunderbird, unless specifically do you these race with different profiles. In practice, if they are allowed to use the same profile, the first Thunderbird should should acquire the profile and therefore block the others, although this may not become apparent until you try to salvage something, for example, a message, or to change certain settings.

  Your multiple Thunderbird work successfully? They all show the same mixture of accounts, folders and address books? Can all or part of them save and make changes?

  If this is the expected behavior, (i.e. some "typical" windows) I do not like; He does not play well with profile blocking and I think that lead to problems.

• Firefox does not work for multiple instances of the SAME user account on Windows Multipoint Server 2011

  We have a PC HP of MulitSeat MS6200
  It runs Microsoft Windows MultiPoint Server 2011 (which seems to be a twisted version of Windows 7)
  It is implemented in a laboratory of computer science and students connect you using their account for shared room - IE multiple instances of the same user accounts are currently running on the PC at the same time.
  The first student to run Firefox can work with it without a problem.
  However, when another student try to start firefox they get the following message:
  Firefox is already running but is not responding. To open a new window, you must first close the existing Firefox process, or restart your system.

  Cannot start Firefox using a profile that is already used by someone else.
  Each Firefox instance needs its own profile or you will get this error message.

  • http://KB.mozillazine.org/Using_multiple_profiles_-_Firefox
  • http://KB.mozillazine.org/Bypassing_the_Profile_Manager

  Use-no.-line switch remote control to open another instance of Firefox with its own profile and to different instances of Firefox running concurrently.

  • http://KB.mozillazine.org/Opening_a_new_instance_of_Firefox_with_another_profile

• Energy saving of Toshiba on SP M30

  I have the same problem with Toshiba watch on my SP M30 laptop running WinXP SP2 and SP1.
  This utility generally LCD Brightness according to the level of the battery.
  If you connect your laptop to external power the display gets bright IF you are logged on as an administrator.
  This is not the case if the user has no administrator rights, the user gets the access denied message if you try to start this application.

  If I understand correctly Power Saver should adjust the brightness of the LCD screen automatically, or it should be at least possible to choose a predefined profile even if connected as a user.

  Energy saving settings may deny access to the application to users, but I don't have a check mark in this box.

  I tried to uninstall and reinstall the app without success.
  Even with no installed saver the screen goes black, and then even an admin can not fix it.
  Any suggestions?

  / Normunds

  Hello

  your first question is not clear as what experience do you have with the energy saver and SP1 or SP2? Could you write it down more detailly to facilitate the support of the community.

  In my opinion, you had installed as administrator energy saver and maybe you restrict the user rights!

  For the problem solve you should uninstall the energy saver and do a fresh install with the latest version of the page Web of Toshiba.

  Also, you should read the "Driver Update Information for Windows XP with Service Pack 2" which you can also download on http://eu.computers.toshiba-europe.com

  Go to support and download and choose your machine!

  Sammy

• Spectrum x 360: screen goes black randomly when on battery and some energy-saving options enabled

  Hello everyone,

  I bought this fantastic machine called spectrum x 360 and I love it.

  Unfortunately since the early days I'm facing what I think it's a problem of driver/software (not the related material).

  This problem only occurs when I'm on Windows, not in the bios or at the startup. JUST IN Windows envinroment, especially after the login, and when the computer was turned off. Sometimes when I use it after a while, randomly.
  This occurs only when the spectrum is on battery. The problem does not appear on AC adapter.

  Problem: the screen goes black randomly for a few seconds and then reappear, sometimes the entire image on the right slide and there is a part that looks like yellow and corrupt, then goes black and reappears.

  Windows Version: I'm on Windows Home 64 bit, build 14393.321 10 (update of the anniversary).

  The entire screen works fine for normal operations, no artifacts.

  Replication of the problem
  Initially, I was able to reproduce the problem with the driver build 4360 (which is the version of the driver from the HP site). Whenever I loaded the home page of youtube and the banner has started playing on the screen went black sistematicly.
  Then I updated the GPU driver through the Device Manager, which has improved my GPU driver to 21.20.16.4494, as of July 25, 2016 and the problem happens much more rarely.
  Now I am facing this problem again but Edge works correctly and is not the cause of the problem, it can appear even when I don't do anything with the PC.

  I noticed this problem appears when saving options are enabled for the Intel GPU (I'm trying to translate this to English because the GPU driver Panel is in Italian):
  
  -update panel houses;
  -advanced mode; energy saving
  
  If I disable these options, the problem does not appear or, better, for I've tested so far, he could not displayed when options are not in market, but I have not tested this very long to be sure.
  
  In my opinion, there is a bug in the display driver, or some customizations made by HP causes problems with the driver.
  The rest of the computer works correctly.
  Any idea to solve this problem? Or should I keep these options turned off power saving?

  Hi, thanks for your help.

  I have a passion for COMPUTING and ex-computer SCIENTIST, I am familiar in surveys on hardware/software questions and hope that this post will help some users get rid of this problem.
  Black screens and screen corruption has been issued by the option called "auto refresh Panel" energy saving.
  I did a lot of hours on battery (condition where this pop ups problem) in these days and the problem didn't show when it was turned off.
  To verify that I tried to activate "Panel options self-identity" in certain occasions and, at random, on the first boot of the machine (after being turned off) the problem arises again.
  It certainly is a problem with this energy-saving option.
  Now everything works fine.
  If the problem appears again, I will post more information.
  Thank you for your support.
  
  I think it would be useful to stick this post on top in this section of the forum, to be useful to other users and being more visible.

• Need for energy saving of Toshiba for Satellite A215-S5824

  Hello

  I need Toshiba A215-S5824 for energy saving
  I downloaded this soft ware which especially for A210 series, but don't install the fatal error 0 x 0 and 0X45A.

  Please put the link of this software.
  Thank you

  Hello

  Power saver right for your laptop model Toshiba, you will find under http://www.csd.toshiba.com/cgi-bin/tais/su/su_sc_modSel.jsp
  We support page.

  In any case, the experience can say that you will not be able to resolve this problem if you install from there energy-saving. I had similar problem two years ago. Nothing helps. At the end I ve installed OS using recovery media delivered.

• Satellite M40X-286: energy saving and the E - key utility does not work on Vista

  First of all, sorry for my bad English.

  I managed to install Windows Vista Ultimate 32-bit on my Satellite M40X-286. Everything works, except for the energy saving and the E - key utility. I tried the added value of packages of other TOSHIBA models, but they all give an error message during the installation. Is there a solution for this problem?

  Now I can't change the speed of the processor and the brightness of my screen, and I can't even adjust these settings in a power mode. The only way to change the brightness is manually using the FN + F6 and F7 keys.

  Kind regards
  Stijn.

  Please don t be crazy about me, but there is no problem at all. The situation is quite clear.

  First: tools and utilities are similar, but in most cases have to be adapted for each laptop model. It may happen that some tools work on the different model of laptop, but this does not mean that he has to work on each model.

  Second important fact is that Toshiba does not Satellite M40X support for Vista operating system and I guess you won't be able to use this tool. In my opinion, it is not so important, because all the energy-saving settings you can find in Vista power options.

  For utility E - key, I don't see a solution. If you use OS not supported, you must live with it.

• Energy saving seems to work on Tecra M5-103

  Hello

  I'm still under win xp original preinstalled operating system, currently being updated with all the latest versions of all powersaver just doesn't seem to work, or if it does, its out of control, here's what I've lived.

  I put on my laptop screen turns off after 5 minutes

  It turns off, I can't get the pc to come back, by pressing the main power button, or no button does nothing, im finally forced to close and lose all my work
  or
  It is not okay and the screen stays on

  I also tried to uninstall the energy saver and reinstall the latest version

  When uninstalled, the standard windows power options, do not work or the other or are unpredictable, IE tell you when it is at full power, screen only turns off after 5 minutes, he won't, I don't know if its something running in the background cause

  I reinstalled the last Eve always of the same problems.

  This is my first post here, it's my first tosh, and I bought the most expensive.
  I had 4 other laptops before that were all excellent without any problems.

  I considered reinstalling basic o/s without extras tosh and base drivers just to be honest, just to see if its hardware or software that I realize that problems are not so easily diagnosed.

  According to the Task Manager, I'm an accumulation huge pf up after only 1 day of work. I prefer not to close every day if possible as I work online and I have a lot of open work. Only I have no choice that the pf usage becomes too high.
  I installed also now total extra ram of 2 GB.

  any help is appreciated

  Thank you

  Hi Jason

  I put t think it's problem of Toshiba Power saver.
  Of course, you can set these parameters in the energy saver and energy-saving control this option but in my eyes he s not the energy saver.

  I recommend the update driver graphic of the latest version that is available on the Toshiba driver page.
  Additional verification of the version of the BIOS. If new BIOS is available try to update. But be sure that Jason the BIOS wrong can damage your unit!

  Please come back and share additional information with us...

• Satellite P30: Energy saving does not work correctly

  Hello
  I have a Toshiba Satellite P30 (with Windows XP) and I have problems with my energy saving mode. When I use it for games and other applications of high power, it gets really hot on the edge of the moitor and stops.

  Is it for the last month or two. Before that, it was absolutelly no problem. I checked the file TPSTrace and got this error message:
  A fatal error has occurred. The program will end. Code: 0x0 rental: MainFrm.cpp (1317)

  I do not know what to do with it and how to solve the problem. Any ideas?

  Hi Thomas

  It is not easy to give you an accurate diagnosis, but in my opinion your laptop isn't hot because of the energy savings. Satellite P30 is pretty old laptop and maybe you should clean your laptop.

  Have you done this before?

  This error seems to be serious and what you can do is to remove the preinstalled energy saver and after restarting try installing it again.

  Just FYI: Watch tool is very useful, but certainly not so important and your system can function very well without it. Because of this, I presume that portable hot is because of dust inside. With more CPU and activity hardware graphics card will be hot and must be cooled properly. If the cooling rack does not clean this cannot happen. Initially, notebook will be hot, but one day she is probably turned off without any warning.

  In the first trial step to clean your laptop and remove all the dust under cooling grill.