Energy saving and its fall to stop AGAIN!

Similar Questions

• Satellite M40X-286: energy saving and the E - key utility does not work on Vista

  First of all, sorry for my bad English.

  I managed to install Windows Vista Ultimate 32-bit on my Satellite M40X-286. Everything works, except for the energy saving and the E - key utility. I tried the added value of packages of other TOSHIBA models, but they all give an error message during the installation. Is there a solution for this problem?

  Now I can't change the speed of the processor and the brightness of my screen, and I can't even adjust these settings in a power mode. The only way to change the brightness is manually using the FN + F6 and F7 keys.

  Kind regards
  Stijn.

  Please don t be crazy about me, but there is no problem at all. The situation is quite clear.

  First: tools and utilities are similar, but in most cases have to be adapted for each laptop model. It may happen that some tools work on the different model of laptop, but this does not mean that he has to work on each model.

  Second important fact is that Toshiba does not Satellite M40X support for Vista operating system and I guess you won't be able to use this tool. In my opinion, it is not so important, because all the energy-saving settings you can find in Vista power options.

  For utility E - key, I don't see a solution. If you use OS not supported, you must live with it.

• Lexmark s600 series printer - is stuck on energy-saving and doesn't display any other button

  How to get back to the homepage

  Disconnect the printer power maybe 5 minutes, and then reconnect.

  The prointer is correctly initialized to the home screen? If not, contact support for Lexmark...

  http://www1.Lexmark.com/en_US/about-us/company/contact-us.shtml

• Watch "energy saving" while sounds of processor as its operation to fast.

  After working on my computer, I turn the monitor off and on foot, leaving the computer running.  When I get back later the processor seems ready to take off.  I re - turn on the monitor and it immediately goes into "energy saving" and I can't get out of this mode to shut down the computer, so I have to hold the power button until it turns off. I had this problem for about 3 weeks.  Everyone knows a similar problem?

  Try a system restore to a Date before the problem began:

  Restore point:

  http://www.howtogeek.com/HOWTO/Windows-Vista/using-Windows-Vista-system-restore/

  Do Safe Mode system restore, if it is impossible to do in Normal Mode.

  Try typing F8 at startup and in the list of Boot selections, select Mode safe using ARROW top to go there > and then press ENTER.

  Try a restore of the system once, to choose a Restore Point prior to your problem...

  Click Start > programs > Accessories > system tools > system restore > choose another time > next > etc.

  http://www.windowsvistauserguide.com/system_restore.htm

  Read the above for a very good graph shows how backward more than 5 days in the System Restore Points by checking the correct box.

  See you soon.

  Mick Murphy - Microsoft partner

• my windows vista computer when its loading windows turns black and stops working then starts again and the same thing happens again.

  When I turn on my pc, the system starts the Pentecost a poblem but when windows Vista family premium starts to go the window that allows you to put the password it goes black after a wile it restarts and the same thing happens again.
  safe mode works I have Dome system restore format and reinstall windows and happens again :(

  Hi LGStrike,

  Restore your computer to a point before the updates being installed with the System Restore.  Then proceed as follows:

  1. go in Control Panel , and then select Windows Update.

  2. click on check for updates.

  3. once the results come back, click on the link that shows Important updates and deselect all the updates except the first 3 or almost and install the updates.

  4. Repeat steps 1 through 3 until you receive the error message.

  Dena
  Microsoft Answers Support Engineer
  Visit our Microsoft answers feedback Forum and let us know what you think.

• Spectrum x 360: screen goes black randomly when on battery and some energy-saving options enabled

  Hello everyone,

  I bought this fantastic machine called spectrum x 360 and I love it.

  Unfortunately since the early days I'm facing what I think it's a problem of driver/software (not the related material).

  This problem only occurs when I'm on Windows, not in the bios or at the startup. JUST IN Windows envinroment, especially after the login, and when the computer was turned off. Sometimes when I use it after a while, randomly.
  This occurs only when the spectrum is on battery. The problem does not appear on AC adapter.

  Problem: the screen goes black randomly for a few seconds and then reappear, sometimes the entire image on the right slide and there is a part that looks like yellow and corrupt, then goes black and reappears.

  Windows Version: I'm on Windows Home 64 bit, build 14393.321 10 (update of the anniversary).

  The entire screen works fine for normal operations, no artifacts.

  Replication of the problem
  Initially, I was able to reproduce the problem with the driver build 4360 (which is the version of the driver from the HP site). Whenever I loaded the home page of youtube and the banner has started playing on the screen went black sistematicly.
  Then I updated the GPU driver through the Device Manager, which has improved my GPU driver to 21.20.16.4494, as of July 25, 2016 and the problem happens much more rarely.
  Now I am facing this problem again but Edge works correctly and is not the cause of the problem, it can appear even when I don't do anything with the PC.

  I noticed this problem appears when saving options are enabled for the Intel GPU (I'm trying to translate this to English because the GPU driver Panel is in Italian):
  
  -update panel houses;
  -advanced mode; energy saving
  
  If I disable these options, the problem does not appear or, better, for I've tested so far, he could not displayed when options are not in market, but I have not tested this very long to be sure.
  
  In my opinion, there is a bug in the display driver, or some customizations made by HP causes problems with the driver.
  The rest of the computer works correctly.
  Any idea to solve this problem? Or should I keep these options turned off power saving?

  Hi, thanks for your help.

  I have a passion for COMPUTING and ex-computer SCIENTIST, I am familiar in surveys on hardware/software questions and hope that this post will help some users get rid of this problem.
  Black screens and screen corruption has been issued by the option called "auto refresh Panel" energy saving.
  I did a lot of hours on battery (condition where this pop ups problem) in these days and the problem didn't show when it was turned off.
  To verify that I tried to activate "Panel options self-identity" in certain occasions and, at random, on the first boot of the machine (after being turned off) the problem arises again.
  It certainly is a problem with this energy-saving option.
  Now everything works fine.
  If the problem appears again, I will post more information.
  Thank you for your support.
  
  I think it would be useful to stick this post on top in this section of the forum, to be useful to other users and being more visible.

• Whenever I try to update, I get the message "windows Explorer has stopped working". It then seeks a solution, restarts, and immediately stops again. No error code just a constant circle. This has happened for days. I am running windows 7.

  Whenever I try to update, I get the message "windows Explorer has stopped working".  It then seeks a solution, restarts, and immediately stops again. No error, just a constant circle of shutdown and startup code.  This has happened for days.  I am running windows 7.

  I think that norton or mcafee may have been preinstalled as trial versions, but I've never actually used them. Unfortunately I can't use the windows Explorer, so I can't check if they are still there.

  We will cover all the possibilities.

  1. download each of the tools for deletion below, save it to your desktop:

  Norton Removal Tool: ftp://ftp.symantec.com/public/english_us_canada/removal_tools/Norton_Removal_Tool.exe

  McAfee removal tool: http://download.mcafee.com/products/licensed/cust_support_patches/MCPR.exe

  2. close all open applications (that is, anything with an icon on the taskbar).

  3. After completing some you have a copy of your handy product key, uninstall all software (including LiveUpdate and Add-ons of Norton) Norton through Control Panel | Programs | Uninstall a program (or Control Panel |) Programs and features, if you are using the classic view)

  IMPORTANT! => Activate the Windows Firewall immediately after the restart.

  IMPORTANT! => Now you're "working without a net": no to ANYTHING else online (e.g., navigation, reading e-mail, chat) until you have completed the steps #4, #5 and #6 below!

  4. right click on one of the files that you saved in #1 above and select run as administrator to run the utility. DO TAP not your keyboard until the race ends, then restart.

  5. Repeat step #4 for another removal tool.

  Tips:

  -Online use another computer to download the removal tool, if necessary, then transfer it to the computer via CD, DVD, or a USB brand new, never been used (flash drive), or a summer freshly updated in shape.

  -Online start the problem in Mode safe computer, if necessary, proceed as above.

  -Online after completing all of the above, uninstall AVG Free & reboot. Now do a new installation of AVG Free 9.0, this time select the CUSTOM installation option and do NOT install (uncheck) Linkscanner Search-Shield, Active Surf-Shield, security or the email of crawl components toolbar.

  Why you don't need your anti-virus to scan your email
       http://thundercloud.NET/infoave/tutorials/email-scanning/index.htm

  -Online download/run system update before running Windows Update again: http://support.microsoft.com/kb/947821

  ~ Robear Dyer (PA Bear) ~ MS MVP (that is to say, mail, security, Windows & Update Services) since 2002 ~ WARNING: MS MVPs represent or work for Microsoft

• my computer keeps going to energy saving mode and TIME off

  each time my computer shuts down I have to turn power on wall to restart it and itgives me 10 minutes and will return to the mode and towers out of energy saving

  Why do you think a problem as it is related to Firefox?

• my keyboard suddenly begin to type a character over and over again and I can't stop it. Comes to post notes or elsewhere

  My keyboard suddenly started typing a character again and again and I couldn't stop. Arrived at post notes or anywhere where I tried to type. At the same time my wireless mouse began to be nervous and some characters appeared on my typing ("n" with 2 different symbols above it.) I rebooted, but not better - then changed my wireless keyboard - mouse always nervous. But my wireless keyboard does not produce the 'a' and 's' (the reason I went back to wired keyboard) so I reconnected the keyboard and the problem disappeared. Is there any other fix if this happens again?

  Change the batteries, and then maybe try to carefully clean the keyboard and especially around the defective key, or - if the switch or circuit is damaged, or if there was liquid damage, and it's not just a crud stuck in keyswitches - replace the keyboard.

• My screen saver does not work all the time, usually this seems to happen once the aircraft stopped in the energy saving mode.

  Original title: my screensaver does not work all the time

  My screen saver does not work all the time.  First time I have turn on computer, it works OK.  Later in the day, this isn't.  Usually, this seems to happen once the aircraft stopped in the energy saving mode.  After the reactivation of the computer (do not), the screen saver does not work when it should. How to run all the time?  I am running Kapersky Internet Security 2011.  This would be closed by the screen saver?
  Thanks, Garybuyit

  Hi garybuyit,

  Thanks for posting your question in the Microsoft answers Forums.

  Just so I'm clear, updated you the graphics cards in Device Manager? You have access to a Windows XP installation disc. If so, follow the steps in this document to make a scan of the SFC. This analysis will attempt to repair or replace any missing or corrupted system files.

• What are the causes my print spooler continues to operate, and quickly stop again when I restart it? Lexmark P4350 - Windows 7 Edition home premium

  What are the causes to stop working during printing and stop again shortly after I start my print spooler. I also find that my printer takes a long time to start printing after I clicked "Print". I use an all-in-one printer Lexmark P4350 on Windows 7 Home Premium.

  David

  Hi David,

  Thank you for the update.

  Use all the dependency services?

  The solution for slow printing is the print spooler reset.

  When we press the Windows key + R, a window opens. This is called the immediate window.

  I suggest you to uninstall and reinstall the printer drivers and check. Lexmark is not Windows 7 compatible drivers for the printer. So, you can download the drivers for Windows Vista and install in compatibility mode.

  Follow the steps to install in compatibility mode:
  a. right click on the driver installation file and select Properties and then tap or click on the compatibility tab.
  b. check the box run this program in compatibility mode .
  c. press or click the menu drop down and select a previous operating system, and then tap or click OK.

  Reference:
  Video: Compatibility of software and hardware in Windows 7
  http://Windows.Microsoft.com/en-us/Windows7/help/videos/software-and-hardware-compatibility-in-Windows-7

  Let us know if the problem persists.

• What is this and how can I stop\adapter 'Atheros ARR9285 fall in my network, I can't download my norton360 top?

  What is this and how can I stop\adapter 'Atheros ARR9285 fall in my network, I can't download my norton360 top?

  What is this and how can I stop\adapter 'Atheros ARR9285 fall in my network, I can't download my norton360 top?

  Atheros ARR9285 is a wireless network adapter.

  Problems with Norton 360 should be directed to Norton Support: http://us.norton.com/support/

• I downloaded an image adobe and its saved my library how do I save the image to my PS documents

  Can anyone help please.  I bought a picture images adobe and its saved to my library, when I try and save it to my documents PS that it won't give me the option to save in my PS documents.

  You don't have the ability to download your licensed image on your desktop, on the Web Adobe Stock page.

• Satellite P30: Energy saving does not work correctly

  Hello
  I have a Toshiba Satellite P30 (with Windows XP) and I have problems with my energy saving mode. When I use it for games and other applications of high power, it gets really hot on the edge of the moitor and stops.

  Is it for the last month or two. Before that, it was absolutelly no problem. I checked the file TPSTrace and got this error message:
  A fatal error has occurred. The program will end. Code: 0x0 rental: MainFrm.cpp (1317)

  I do not know what to do with it and how to solve the problem. Any ideas?

  Hi Thomas

  It is not easy to give you an accurate diagnosis, but in my opinion your laptop isn't hot because of the energy savings. Satellite P30 is pretty old laptop and maybe you should clean your laptop.

  Have you done this before?

  This error seems to be serious and what you can do is to remove the preinstalled energy saver and after restarting try installing it again.

  Just FYI: Watch tool is very useful, but certainly not so important and your system can function very well without it. Because of this, I presume that portable hot is because of dust inside. With more CPU and activity hardware graphics card will be hot and must be cooled properly. If the cooling rack does not clean this cannot happen. Initially, notebook will be hot, but one day she is probably turned off without any warning.

  In the first trial step to clean your laptop and remove all the dust under cooling grill.

• The battery takes only 10 minutes and portable life time stopping randomly.

  I have a laptop Toshiba Satellite with Windows Vista. I got it for about 4 years, and since a few weeks ago my battery life has declined rapidly. Once it is fully charged, I unplug the unit and he said that I usually have about 13 minutes remaining until I have to reload. The battery used to last nearly 2 hours. 20% remaining capacity, my computer is asleep at random and locks. I have to wait a few minutes and then press the power button / stop and type in my password again. I already have my plan of the battery power as "Power Saver" that increases the battery life. I was prompted to change my setting of peak power, which I did, with no result. Here's what my settings are:

  Critical battery action: sleep (cannot change this)
  Critical battery level: 1%
  Low battery action: do nothing
  Low battery: 3%
  I changed numbers autour and nothing seems to work better than anything else. I'm really angry at the short battery life and falling asleep randomly. Can anyone help? Should I get a new laptop or just a new battery?

  Hello

  4 years is a long time for a battery and degradation that you see is expected.

  Old battery? Unplug the power to the computer - remove the battery and clean the contacts with a pencil
  eraser (do not use this, if your battery is fine slots - just clean up the edges of the knife which fit in)
  them and be careful). Batteries are old, or it could be a problem with the computer.
  Check with the support of the machine system, and many of them have on line forums.

  New Lithium-Ion type battery usually last longer if you do not unload then less than 30%
  However on a laptop that not extend their life a lot. Best is to use the a/c adapter
  When this is possible.

  I use the free version of BatteryBar to monitor my battery. Click on the green button on the
  Yellow box on the right side of the page to download the latest stable version.

  BatteryBar - free version available
  http://osirisdevelopment.com/BatteryBar/index.html

  Problems with the lives of its use and the battery of power - Mr Fixit
  http://support.Microsoft.com/GP/windows_battery_power_settings

  You can also check with the manufacturer of system and forums that many use their own
  proprietary software to monitor the battery and they could be known problems with your battery.

  Toshiba - Forums
  http://laptopforums.Toshiba.com/

  Toshiba - Contacts
  http://www.CSD.Toshiba.com/cgi-bin/TAIS/support/JSP/navShell.jsp?CF=su_contact

  Toshiba - drivers - access your model
  http://www.CSD.Toshiba.com/cgi-bin/TAIS/support/JSP/home.jsp?NAV=download

  Toshiba - Support
  http://www.CSD.Toshiba.com/cgi-bin/TAIS/support/JSP/home.jsp

  ============================================================

  Try this - to make a Restore Point

  How to create a Vista System Restore Point
  http://www.Vistax64.com/tutorials/76332-system-restore-point-create.html

  How to make a Vista system restore
  http://www.Vistax64.com/tutorials/76905-System-Restore-how.html

  Then Control Panel - Manager of devices - Batteries - Double click on each item - drivers - tab
  Update the drivers (which can do nothing) - then do a right click and UNINSTALL each - RESTART
  who will update the driver stacks.

  Problems with the lives of its use and the battery of power - Mr Fixit
  http://support.Microsoft.com/GP/windows_battery_power_settings

  I hope this helps.
  Rob - bicycle - Mark Twain said it is good.