multiple instances (windows) of Illustrator?

Similar Questions

• Firefox does not work for multiple instances of the SAME user account on Windows Multipoint Server 2011

  We have a PC HP of MulitSeat MS6200
  It runs Microsoft Windows MultiPoint Server 2011 (which seems to be a twisted version of Windows 7)
  It is implemented in a laboratory of computer science and students connect you using their account for shared room - IE multiple instances of the same user accounts are currently running on the PC at the same time.
  The first student to run Firefox can work with it without a problem.
  However, when another student try to start firefox they get the following message:
  Firefox is already running but is not responding. To open a new window, you must first close the existing Firefox process, or restart your system.

  Cannot start Firefox using a profile that is already used by someone else.
  Each Firefox instance needs its own profile or you will get this error message.

  • http://KB.mozillazine.org/Using_multiple_profiles_-_Firefox
  • http://KB.mozillazine.org/Bypassing_the_Profile_Manager

  Use-no.-line switch remote control to open another instance of Firefox with its own profile and to different instances of Firefox running concurrently.

  • http://KB.mozillazine.org/Opening_a_new_instance_of_Firefox_with_another_profile

• How can I play multiple instances of video to classic media player in Windows xp help, that I could do so some time! It has to do with the codec? If yes what codec plays multiple instances?

  How can I play multiple instances of video (no problem reading of 12 movies at the same time, at the opening of the 13th film the problem only starts), the classic use of media player in windows XP? I was able to do all the time! It has to do with the codec?
  If yes what codec plays multiple instances of Media Player Classic in windows XP?
  I get the same problem with VLC all that needs to be checked on preferences is checked in the two VLC & MPC!

  Hello

  Multiple instances of Media Player is not supported in version 7 and greater.

  · What version of Windows Media Player you have installed?

  · Are instances that you are referring to the bodies shipped?

  · You use any third-party software to run multiple instances?

• Multiple instances of rundll32.exe in Windows 7 Premium using all RAM - no viruses detected by MSE but PC runs slowly

  Processor: AMD Athlon (TM) 9750 Quad-Core 2.40 GHz

  4,00 (3.75 usable) GB RAM

  System: 64 - bit OS with Genuine Microsoft Windows 7 Premium (purchased separately with distributor online PC)

  At startup, there are three instances of rundl32l.exe with no path name Image displayed in the Task Manager.

  The three were separated from the PID of 1624, 1634 and 1644.

  None has an associated user name.

  Used private working memory is listed as 128K, 344K, 520K.

  Commit size is listed as 1, 036 K, 1 864 K and 1 940 K.

  List page 717, 1 731, and 2 044 defects

  Note that the following persons have no associated user name, until I log in as an administrator:

  Csrss.exe, nwsvc.exe, until I log in as an administrator, date at which all are listed as belonging to the user of the system.

  There are two instances of csrss.exe after I login as an administrator to monitor the system.

  Note that as soon as I open MSIE (worm: 9.0.8112.162421 64-bit Edition |) Update: 9.05 (KB2647516) | Encryption level: 256-bit)
  The use of the RAM dropped to 1.04 BG of the GB available total 3.75, jumped but still once 3.14 GB and the balloons of the use of network.

  as soon as I logged as administrator.  There are multiple instances open for svchost.exe attributed to the system, network and Local Service.

  Since I use MacAfee and Microsoft Security Essentials and have found a problem, I wonder if there is a virus that creates multiple

  run32dll.exe and this according to the capacity of detection of these two programs.

  You know, it's more difficult to follow all the news - just to get a response.  I've restored as soon as possible, has got rid of the programs and the remains, then reinstalled MSE and updated, and, Yes, the computer is updated and better now with the improvement of power, video card and without an easy way to trace this information (you know a feature of Windows that would follow easily everything you ask?) - it seems a big eater of real-time , for questionable results.  I thought that Windows 7 Ultimate would have included more administration tools just to log on and view, copy, paste, rather than the back-and-forth necessary to fill out a form that is as unique as it is not shoot all the tools.  I see that much info required users, and where is the forensic tools easy to use a computer owner should have?  Malware authors certainly use them.  The average owner must be at least as good a handle on reports on what's happening, everything down to the core.

  Any tips?

• Multiple instances do not have parallel job using scripts on Windows Server

  Hi all

  I download after effects template on my site, the user came and download the desired content.

  I'm updating the model using scripts with the content of the user and then video rendering and therefore user get video with his text/images uploaded etc.

  its working perfectly when I update a unique model, but when multiple users come at the same time, then they need multiple instances of sequels

  so I opened multiple instances of after-effects by using "m" with after having shortened the effects

  

  After looking at the windows Task Manager, there are two instances, but the problem is

  one continuous instance and the other stop, at the end of the trial the second still paused state

  

  I need 2.3 4 or any case to work in parallel without pause/stop

  I am using windows server 2008 R2 with installed XAMP

  It's a Setup completely unsupported in first place and you will be difficult to find someone who can help you. Probably, you will need to create separate shortcuts / files in batches and run them in separate instance contexts. AE itself always detects running instances and reuse.

  Mylenium

• How can I hide/show toolbar again operate independently on multiple instances of firefox?

  I run two instances of firefox.exe. One for the left monitor and one for the right. There is a toolbar that I want to see on the right screen, but I don't want to see it on the left screen. This used never to be a problem, but it is now. It seems as if well now why show/hide toolbars are inextricably linked, and by changing or watching a toolbar on a single instance simultaneously causes the exact change even on the other open instance. I'm hoping that it could be a simple solution to this effect in the subject: config, however, I would rather not tamper with these settings until I'm sure that settings with the fix for this particular problem.

  Thank you for your attention and for taking the time to read this post.

  Sincerely;
  DC

  Toolbar settings are common to all windows open in this instance of Firefox.
  I don't know if there is an extension that allows to fix this dependent window, so you can check the website of modules.
  If you can't find one then you would use a second instance with its own profile.

  You can add - no.-distance to the command line to open another instance of Firefox with its own profile and run multiple instances of Firefox at the same time.

  • http://KB.mozillazine.org/Opening_a_new_instance_of_Firefox_with_another_profile
  • https://developer.Mozilla.org/Mozilla/Multiple_Firefox_Profiles
  • http://KB.mozillazine.org/Using_multiple_profiles_-_Firefox

• Question about multiple instances of Thunderbird running at the same time

  I read that when you start Thunderbird by clicking on its icon or the shortcut must only load once, even if you click on it several times. It should be just a window of TB. If I click on the shortcut/TB desktop icon, it behaves like that. I can click several times and that a single TB window will open and be active.

  However, if I run the 'quick launch' TB on my windows 8.1 (or no matter what windows) taskbar, I get mulitple TB windows to open, as much as I want. So if I click on TB icon in the quick launch once, I get a single instance of it. Twice, I get two, and etc. In the quick launch any program behaves like that. He starts programs with a single click and launch again and again.

  Only, I click it once and get an instance which is good and how it should be. But this behavior with the quick launch is ok? It must do this not with Thunderbird? Thank you.

  There is usually no advantage by running multiple instances of Thunderbird, unless specifically do you these race with different profiles. In practice, if they are allowed to use the same profile, the first Thunderbird should should acquire the profile and therefore block the others, although this may not become apparent until you try to salvage something, for example, a message, or to change certain settings.

  Your multiple Thunderbird work successfully? They all show the same mixture of accounts, folders and address books? Can all or part of them save and make changes?

  If this is the expected behavior, (i.e. some "typical" windows) I do not like; He does not play well with profile blocking and I think that lead to problems.

• multiple instances of internet explore in my task manager

  Why are there multiple instances of internet explore in my task manager when I open only one page?

  Hello

  IE uses smaller instances of itself to support tabs and correction of errors and it is normal for IE8. In fact
  It uses far fewer resources as well as the opening of 2 or more instances to access several pages. If you
  Open several tabs, and then still more small instances of Internet Explorer will be opened to support these tabs and error correction.

  So basically, everything is normal.

  Multiple Instances of iexplore.exe run when using Internet Explorer 8
  http://www.Winhelponline.com/blog/multiple-instances-of-iexploreexe-run-when-using-Internet-Explorer-8/

  I hope this helps.

  Rob Brown - Microsoft MVP<- profile="" -="" windows="" expert="" -="" consumer="" :="" bicycle=""><- mark="" twain="" said="" it="">

• Explorer 8 opens multiple instances of rundll32.exe when closing

  When I close Explorer 8, rundll32.exe opens multiple instances and memory in the Task Manager go to more than 800,000 for each instance. After running this ram computer and virtually lock up the computer. If I stop the process, everything works normally until I opens and closes Explorer 8. It is repeatable and consistent.

  I use Vista Business, 4 concerts, Dell Latitude D830. Rundll32.exe have searched and found only one instance... located in C:\Windows\System32. I ran several programs of virus and malware and can't find any problems. Register is also good.

  I had similar problems with changing app crash of video files in a folder list to views of large icons.  I sent a problem report and in return had a fix, I unfortunately deleted after it corrected my problem.   I had to go to the command promp
  and in C:\Windows\System32 I had to modify the command that has been something like the pointed out below.

  Fault Module name: Mpeg2Parser.ax
  I think that if you send an error report that you receive a solution.

  It's because of the problem I had.
  Product

  Windows host process (Rundll32)

  Problem

  Stopped working

  Date

  18/06/2009 15:58

  Status

  More information

  Signature of the problem

  Additional information about the problem

  Bucket ID: 376914080

  Problem event name: APPCRASH

  Application name: RunDLL32.exe

  Application version: 6.0.6000.16386

  Application timestamp: 4549b0e1

  Fault Module name: Mpeg2Parser.ax

  Fault Module Version: 1.2.0.79

  Timestamp of Module error: 38e280dd

  Exception code: c0000005

  Exception offset: 00006210

  The system version: 6.0.6001.2.1.0.768.3

  Locale ID: 2057

  Additional information 1: fd00

  More information 2: ea6f5fe8924aaa756324d57f87834160

  Additional information 3: fd00

  Additional information 4: ea6f5fe8924aaa756324d57f87834160

• If you open multiple instances of vWorkspace fails.

  I'm pretty new to vWorkspace pls if being informative and sweet in your answers until I got up to speed, thanks.

  I have a vWorkspace environment where users can not open multiple instances of any application from their destination vWorkspace page. Let me give you an example:

  JulianTest of the user connects to vWorkspace and sees to the vWorkspace landing page which has two icons 'Production' & 'Test '. The user clicks on "Production" but also wants to open an instance of 'Test', but when he click on 'Test' it gets the error:

  Remote Desktop cannot connect to the remote computer to one of the following reasons:

  ....

  ....

  ....

  If the user does the same thing except opens first ' Test' and then try to open 'Production' then, it gets the same error. Somehow, vWorkspace does not allow more than one RDP session for any user. I tested the computer of the user remote DESKTOP connections and I can open any number of RDP sessions to different terminal servers (there are about 10 servers terminal Server in the farm!) is not something RDP.

  Can anyone suggest how can I fix?

  Technical details:

  Workstation user OS: Windows7

  Terminal servers: Windows 2003

  Broker servers: 2 x Windows 2003

  vWorkspace version: 7.5.304.547

• Multiple instances of the Microsoft bluetooth stack

  Hi all

  I'm having a problem in the use of two adapters Bluetooth Microsoft Bluetooth stack. Or the other adapter works fine until the other adapter is not connected. When other adapter is connected, it does not starts shown in Device Manager. Reason, displayed is that device can not start (error code 10).
  I think it's because of the connection of Audio service resource conflicts that might be solved if multiple instances of Microsoft Bluetooth Stack may be executed or some configuration settings. I'm fighting for a long time, but I still have not found any method of work.
  Bluetooth adapter: Atheros 3011.
  Error with the second device:
  
  Error message:
  

  Hi Suresh,

  A single active Bluetooth radio is supported both in Microsoft Bluetooth Stack. It should be possible to establish a connection to a few destinations at the same time using a radio. No battery on Windows supports more than one radio.

  To get help on this question, I suggest you to report your query in the TechNet Forums.

  http://social.technet.Microsoft.com/forums/Windows/en-us/home?category=w7itpro&filter=AllTypes&sort=lastpostdesc

  It will be useful.

• Installation of multiple instances of Essbase on a single machine

  Dear gurus,

  I did the install vanilla of the costume of Hyperion (11.1.2.2) products on my machine (windows 2008 SP1, its a Virtual Machine) virtual machine (I installed Foundation, EAS and just Essbase)

  My first Essbase instance is running on default port 1423and I tried to configure the second instance of Essbase using port 1424 and all the donfiguration succeeded. I can see the 2nd service of essbase running at services.msc

  I followed the steps mentioned in the:

  http://docs.Oracle.com/CD/E17236_01/EPM.1112/epm_install_11121/frameset.htm?essbaseAgentPortPanel.html

  My 1st instance is installed to: D:\Oracle\Middleware\user_projects\epmsystem1

  My 2nd instance is installed to: D:\Oracle\Middleware\user_projects\epmsystem2

  Now the problem is that I can add and connect 1st instance of Essbase (SERVERNAME:1423) using the administrator account in the environmental assessment.

  but when I try to add 2nd Instance of Essbase as SERVERNAME:1424 using the administrator account, it throws the following error:

  Error on the Regional service console:

  Admin October 8, 2013 14:29:21 IST com.essbase.eas.admin.defs.AdminCommands.AddServerToUserList Succeeded

  Essbase Server: SERVERNAME:1424 com.essbase.eas.essbase.defs.ServerCommands.Connect IST 14:29:22 October 8, 2013

  Error: 104: username or password

  Error: 1051012: native://DN=cn=911 of the user, or = People, dc is css, dc = hyperion, dc = com? The USER does not exist

  Error on Essbase.log (of 2nd instance):

  [Mar Oct 08 10:59:22 2013] Local/ESSBASE0 / / / 7488/Error (1051012)

  The user native://DN=cn=911, or = People, dc is css, dc = hyperion, dc = com? The USER does not exist

  [Mar Oct 08 10:59:22 2013] Local/ESSBASE0 / / / 7488/Warning (1051003)

  Error 1051012 processing application [LoginEx] - disconnect

  EPM diagnosis system run on 2nd instance watch following under "Essbase/Essbase:

  FAILED

  EE: Essbase Server

  Validate the connection to the Essbase on servername Server Error: Cannot sign as an already logged in user. Recommended action: Check that essbase server is started.

  Can you please guide me what to do to access this 2nd Forum.

  (1) do I need to have a separate ADMIN user creation for this 2nd instance essbase? If Yes, then HOW?

  (2) I can just copy the essbase.sec of 1st instance of 2nd instance?

  Can you please point me to a reference to have multiple independent instances of Essbase on the same machine?

  I sincerely thank you for your time to this request.

  Best regards,

  Amit

  Do not copy the file s multiple instances.

  It seems that the 2nd day of the Essbase instance has not registered properly with Shared Services, you can try renaming the essbase.sec on the 2nd instance, erase the Essbase.log, resume Essbase, then check the Essbase.log to see if there are errors anyt'ing.

  See you soon

  John

  http://John-Goodwin.blogspot.com/

• CF 11 Enterprise multiple instances are not created correctly with a separate service account.

  The company that multiple instances are not created correctly with a separate service account.

  The questions that I have are very similar to the issues identified in the link below.

  https://forums.Adobe.com/message/6584848#6584848

  My company of 11 CF will not create additional services for my sites of cold fusion beyond the initial service created during the installation process. My problems are compounded because when I try and uninstall the CF11 Uninstalling application crashes and generates the error below. I now have to try to manually uninstall to reinstall CF11. Any help or suggestion to get the problem solved is welcome.

  Description:

  A problem caused this program blocking interact with Windows.

  Signature of the problem:

  Problem event name: AppHangB1

  Application name: javaw.exe

  Application version: 7.0.510.13

  Application timestamp: 52b25e38

  Hang Signature: 0967

  Hanging Type: 6144

  OS version: 6.1.7601.2.1.0.274.10

  Locale ID: 1033

  Signing of additional blocking 1: 09675b5d8f587c9fd57b85cb72e629da

  Signing of additional blocking 2: 2cff

  Signing of additional blocking 3: 2cff32d5db809ac6ce8170a1d7ac1eb0

  Signature of blocking additional 4:0967

  Signing of additional blocking 5: 09675b5d8f587c9fd57b85cb72e629da

  Signing of additional blocking 6: 2cff

  Signing of additional blocking 7: 2cff32d5db809ac6ce8170a1d7ac1eb0

  I solved the problem with the implementation of Cold Fusion 11. I had to disable Windows server 2008 R2 UAC for all users in order to complete the installation with IIS as a web server. This also solves the problem with the inability to uninstall Cold Fusion.

• Connect to multiple instances of a script vCenter?

  How can I connect to multiple instances of a script vCenter without going through separate-entry sequences of credentials or credentials on disk storage?

  I need to browse through a table of the vCenters and run scripts against each of them. They are not related, but the same credentials must be valid on all instances.

  It would be great if there was also a way of parallelization of this job such as each returned only thread STDOUT is it speeding up the script.

  All suggestions are welcome, I can see some tips using PowerShell, but I need to do it in Perl.

  Thank you

  Stephen

  You get close, you are missing just a few required modules. Here is the final excerpt that will work for you:

  use strict;
  use warnings;
  use VMware::VILib;
  use VMware::VIRuntime;

  {eval
  My $vim = Vim::login (service_url-online $url, user_name => $username, password-online $password).
  My $vms = $vim-> find_entity_views (view_type-online 'VirtualMachine');
  {foreach(@$VMS)}
  Print $_-> name. "\n";
  }
  };
  Si ($@) {}
  Print $@. "\n";
  }

  Make sure you put things highlighted in bold, it's what you have in your Perl script. I checked on the VMAs, but I'm sure it'll work on Windows as well.

  You're right, the documentation can be better... If one of the reason, VMware has created all these routines support auxiliary, is to abstract the complication of the API. They also assumed that you'd be connectingn to a single host or vCenter simultaneously. All that falls on these basic configs, it will take your own code/etc. and where watching is that the first part of the challenge

  Good luck

• Workstation 7 on Win7, multiple instances of the taskbar

  When you run VMWare Workstation 7 on Windows 7, VMWare offers systematically there are multiple instances running.  1 for the application itself and 1 for each tab open in the application, regardless of its status running.  It's very confusing when I usually 5-6 tabs open, but only 1 of them is actually being run.  I know there is an icon on the top of each preview indicating if it is suspended or running, but a quick glance, it is difficult to find a case running.

  Is it possible to have only 1 instance of taskbar or display only the virtual machines running in the taskbar, instead of each of them?

  There is no configuration parameter to control the Aero thumbnails, but we had other requests specifically question that makes it more obvious that VMs are suspended and who are running (since they both show a screenshot and are differentiated only by the icon). It is being investigated for a future version of Workstation.