Multiple LDAP servers

Similar Questions

• ICPPX 4.05 and/or call Mgr 4.13 multiple LDAP servers for redundancy

  We run IPCCX 4.05 to high availability (active / standby) and Call Manager 4.13 Pub/Sub. In this configuration, we use LDAP for authentication AD instead of the directory of DC (not my choice... things you inherit in life).

  The call of Bishop and/or the servers IPCCX can be setup to point to multiple LDAP servers for redundancy?

  CAN CM 4.13 and/or IPCCX 4.05 LDAPS support (as I have said, things you inherit)?

  Our sysadmin team won our main server to the DC, and with him all functins LDAP search broke. Needless to say they will be put in place of LDAP or LDAPS on our main and backup DC in the near future.

  Any information/suggestions/recommendatinos are appreciated.

  Thank you

  -Scott

  Hello

  This IS possible.

  If the CRS web interface admin (/ appadmin) is available:

  1. open a session

  2. go to the system > LDAP information

  3 type the FQDN / IP addresses (I recommend the latter) for LDAP servers, separated by commas (for example, I have something like in our laboratory: "ldapserver.domain.as, 10.1.1.1" - works like charm)

  4. a window will appear asking if the LDAP information must be created or you just want to add another LDAP server (~ configuration already there). Choose wisely :-)

  5. restart the server. No, restart the CRS engine is not enough.

  If the CRS web administration interface is not available (~ as you said Mr. Sysadmin won DC backend), the there is a chance to get rid of this guy ;-) Anyway, there is always a chance that you can make it work. Of course, the LDAP server must already contain the appropriate configuration.

  1. connect to the CRS Server using rdesktop/VNC

  2. look for this file: C:\Program Files\wfavvid\properties\directory.properties it's just a plain text file. Look for this CCNIniFile=c:\\winnt\\system32\\ccn\\ccndir.ini

  In fact, it can be something else too, this is the default path.

  3. this file contains the information that we are looking for: LDAPURL 'ldap://10.1.1.1:389, ldap://10.1.1.2:389' and other important things like passwords and base DN

  Change it according to your needs. :-)

  4. restart the server.

  Good luck.

  G.

• IPSEC & LDAP servers

  My topology is:

  Cisco routers must open two IPSEC tunnels after registration with a certification authority and must be able to query CRL on two LDAP servers on separate LANs.

  I tried to configure two request of CRL url, but after inserting the first, the second overwrites the first.

  How can I configure multiple LDAP servers on a cisco router?

  I know that in the certificate, there is a field called DP (Point of Distribution) in which I can put the addresses of several LDAP servers.

  A cisco router is able to recognize the DP field in a certificate? And then I follow this path as a workaround?

  The version used in the laboratory is 12.2 (13) T1

  Yes, Cisco routers include the field Point of Distribution, the problem is that multiple entries are only used as a redundancy.

  If according to the distribution point the first certification authority is 10.0.0.1 and the server is down for some reason, it checks the backup entry as appropriate.

• RAY of relief with multiple Radius servers

  Wism2 version 7.6.130

  I have multiple Radius servers for different wireless LANs that are used for authentication. For example:

  WLAN1 - Radius1, Radius2

  Wlan2 - Radius3, Radius4

  WLAN3 - Radius5, Radius6

  Radius servers have different types of user to the authentication databases.

  My question is, when you configure RADIUS of relief in Active mode on the WLC he must receive a successful authentication response in order to stay active or simple an answer?

  Thank you

  Waqas

  "My question is, when you configure RADIUS of relief in Active mode on the WLC he must receive a successful authentication response in order to stay active or simple an answer?

  Hi Waqas,

  It doesn't have to be a successful authentication, could be access accept or decline. You may have noticed with mode active there is a section to specify the user name (default: cisco-probe) what it does is when the radius known as death wlc server use that specific account to query the server radius on the specified time intervals.all these responses would also be responses to refuse access. Just a response if accept or reject to keep active.

  Look here to see little more on the functionality of relief

  See you soon

  Micheline

  WLC actively interrogate the radius server

• Multiple VCenter servers, loop "foreach"?

  I need help with the syntax to change some of my existing scripts to connect to multiple VCenters servers that we have now in my environment.  Something along the lines of:

  $VCenters = VIServer1, VIServer2, etc..

  Foreach ($VIserver to $VCenters)

  {

  SE connect-VIServer $VIserver

  SCRIPT MAPS EXISTING HERE

  }

  Can any input on how I achieve this?

  Thank you

  Hi SNEdwards,

  I do it this way:

  $vCenters = VIServer1, VIServer2, etc.
  
  ForEach ($vCenter in $vCenters) {
  
  connect-VIServer $vCenter -User $VcUser -Password $VcUserPassd
  
  ... code to run against each vCenter...
  
  disconnect-VIserver -confirm:$false
  }
  

  It will be useful.

  Concerning

  Franck

• Is it possible to have multiple LDAP Sync of OIM 11g?

  I have a requirement to configuration LDAP synchronization on a legacy 5.2 iPlanet LDAP server and that seems simple enough. Now, I plan to integrate OAM with IOM. Our OAM is configured against OVD/AD (multiple areas), so that needs a LDAP sync for standing against OVD/AD. I would like to know if multiple LDAP synchronization is possible and that it is a supported configuration? Experts, please help.
  
  Thank you
  Sunil.

  No, only 1. But you can use OVD to connect multiple directories in a point of view and use it.

  -Kevin

• Multiple ESX servers to access the same data store

  We connect our ESX servers to an Equallogic SAN iSCSI using VMWare iSCSI card.   I have a data store that has ISO files to store.   So far, I can connect only this data to an ESX Server store on time.  I have to disconnect an and connect manually to the other.  We currently have a facility relatively bare bones (don't have vCenter again, grouping, etc.).

  Is there anyway to connect the same data store to multiple ESX servers?  I tried to adjust the volume of Equallogic SAN for read only (since I just need to read ISO files), but I can't connect to ESX servers when I do this.

  Remember that the volume is enabled for clustering.

  From v4.x Equallogic firmware, there is an option advanced on each volume.

  André

• How to specify multiple DNS servers with Dr.-ip-customizer

  Hey guys,.

  The CSV file I get out of the Dr.-ip-customizer tool seems to imply that I can specify multiple DNS servers (it has a column called "DNS Server (s)'").  My problem is that I do not know how...  I tried to put in two server IPs with a space between them, I also tried a comma followed by a semicolon.  The semicolon and space gets the error thrown upward when I try to import that says 'Invalid DNS server field' and the comma causes her think that there are too many columns (since it is after all a CSV file).

  so, any ideas? What I have to put on separate lines or something

  According to the Administrator's guide (P. 56, it is not very clear), it seems that you want to place the second DNS server on a new line with the VM ID and the number of the adapter.  '0' If you want to be global value or the number of actual card to override the global settings.

  Hope that helps...

  -alex

• Multiple LDAP providers?

  Is it possible to have multiple LDAP providers configured within a single instance of the UCM?
  
  A.DOMAIN.COM and B.DOMAIN.COM users can authenticate with and share a UCM? It is of course not account how security would be implemented behind the scenes... It is more of a 'If...' question. We would like users authenticating to their domain accounts in their respective fields.
  
  If it makes a difference, A and B are Active Directory domains in a two-way relationship which belong to the common forest of DOMAIN.COM.
  
  Thank you

  If a user1 connects for the first time and their account is in LDAP2, the throughput will be this.

  User1 connects in Content Server-> LDAP1 Hits
  Ldap1 can't find the user-> LDAP2 Hits
  Ldap2 user concludes-> Content server saves in and record that user1 = LDAP2.

  All new requests will be circumvent LDAP1 and go to LDAP2 to User1.

  -AJ Lee
  Software consultant
  www.fishbowlsolutions.com

• Multiple database servers question

  Hello
  
  Forgive me this ignorant question, but can anyone tell
  me how we could go on the use of multiple database servers?
  
  Just as there comes a time where we could use more of
  Server a web and would need to use a load balancing
  solution, what happens when we'd need more than one
  Database server?
  
  How should be done on the implementation of this solution?
  
  Is it possible to have two servers with database the
  same information with a kind of load balancing solution
  in front of it (?) or did a place a few tables in a database
  Server and other tables in the other database server?
  (I have no idea as to how would things.)
  
  
  Thanks in advance,
  
  
  Joe
  
  

  Microsoft SQL allows clusters of SQL databases, so for example two servers connected to a fileshare and a shared virtual address between two physical boxes. Database connections are made to the virtual address which will be then handled by the active node. Because a database is a file (s) on a disk, it can be attached only to a single node at a time if you end up with a cluster of active/inactive.

• Multiple MIS servers with unique vCenter

  Servers multiple SRM integration with vCenter unique?

  Yes. documentation is generally called the recovery site model actions to achieve this. You must use the "custom installation" option to install the nth instance and you must designate this pair of instances with the same identifier string.

  VMware KB: Configure Recovery Site-sharing feature in VMware Site Recovery Manager 4.x and 5.x

• Work with multiple vCenter servers in PowerCLI

  VI the value of multiple server mode:

  Game-PowerCLIConfiguration - multiple DefaultVIServerMode - confirm: $false

  Connect to two servers vCenter:

  SE connect-VIServer-Server vc1, vc2-userid of the user

  Find the cluster and do not specify a VC:

  Get-Data Center-Cluster clusterA

  Cluster data center is displayed correctly:

  name of the data center in VC1

  name of the data center by VC2

  Try to specify what VC of query:

  Get-Data Center-Cluster cluster - server VC2

  the names of three data centers are returned which makes no sense (only one contains the cluster)

  Trying to figure out how better to work with the simultaneous connections of VC in a script and dictate what VC I want to execute a command against rather than disconnect and reconnect etc.

  I think there could be a problem with the cmdlet.

  You are using PowerCLI 5.5 R2 I guess?

  When you try like this

  Get-Data Center-Cluster (Cluster-Get-name ClusterA-Server VC1)

  is it returns 1 datacenter or 2?

• Configure multiple HTTP servers with APEX SSO

  Hello
  We currently have APEX configured to work with SINGLE sign-on using the URL http://server.com:7777/pls/apps. Some companies prevent users to go to the URL with the port 7777. We set up a new server http https rather than just current http implementation. All applications that use the SSO do not work with the new URL. I've added the new partner application in the SSO admin and tried running @regapp.sql. APEX may be configured to run multiple servers http with APEX engine registered as a partner app? We are finally going to a single server but need both up during the transition period. Thanks for any help.
  
  Brian

  Brian,

  Yes. As long as the value of lsnr_token inserted by regapp is unique. It looks like HTML_DB:hostname:port.

  Scott

• 3005 to multiple RADIUS servers?

  Is it possible to install groups in the 3005 to authenticate on the specific RADIUS servers?

  I wish:

  VPNGroup1 authenticate on RADIUS1 then

  VPNGroup2 authenticate on RADIUS2.

  I can tell the group to authenticate to a RADIUS server, but I have not found a way to tell the group what server to use.

  Hello

  Go in configure > user mgmt-> groups

  highlite group, click Server Auth button and then configure the RADIUS server, and it would only be used for this group.

  THX

  AFAQ

• A webgate11g can be used for multiple web servers (ESS)?

  We have a webgate was used for a server of OSH. We need the application on a server of OSH dffierent to protect both by OAM SSO.

  Do we not have to install a new webgate as SST or we can use one of two web servers.

  TIA

  Or treat the app on the second server as a target application that is reverse Proxy through OHS1.