Returning to desktop settings dual monitor after re-docking station?

Similar Questions

• Multiple monitors with laptop docking Station

  I currently have a laptop with a closed lid hung in its docking station, it has 2 external monitors connected by separated through the docking station DVI ports that are configured for a dual monitor set up. Locally on the laptop, it works fine, but when you run the VMview Client (v5) the virtual session recognizes only a monitor. The laptop model is a Dell Latitude E6530 and is the Dell docking station. PRO2X. Our typical installation fuels the virtual desktop customers Wyse zero configuration double monitor works fine. But with the laptop and a station, with options of Windows display, it does not recognize another monitor connected. Does anyone know what I have to do to make this work? When I configured the machine dedicated through VMware View Admin (v5.1) I chose to allow up to 2 monitors.

  In the view of the customer, when you select the office you connect to.

  Below the list of available desktop computers is a menu drop down called "Display".

• How to connect 2 Dell U2415 monitor on the docking station in combination with a Dell Latitude E7450 processor and controller

  Hi guys

  hope you can help me out here. I plan to buy some E7450 processor and controller of Dell's Latitude for our company with a docking station and some Dell Ultra Sharp 24 monitor - U2415. Aims to use the E7450 processor and controller with the dockinstation and connect 2 monitors U2415 of Dell. the issue here is. What type of cable do I need? should I buy 2 normal display port cables? It resolution things to work with this combination?

  Here the link of the monitor

  http://Accessories.AP.Dell.com/SNA/ProductDetail.aspx?c=HK&CS=hkdhs1&l=en&s=DHS&SKU=391-BBUW&redirect=1

  here some specifications of the dell Notebook printer

  Fix. You can also ask users on the laptop Video board on the platforms they use.

• Grateful two monitors on a docking station

  For some reason windows is not recognizing my two monitors I have connected to my HP NZ223AA 230W Advanced Docking Station.

  I use Windows7 64 bit on an HP EliteBook 8560w with an AMD over-pants m5950 graphic card.  As near as I can tell the docking station allows the two DVI ports to use as well as the grahpics card is good for multiple monitors.

  Does anyone know if it is possible to connect a third monitor?  In other words, I have my laptop connected to a station host and then two other monitors for a total of three.

  Thank you

  Cannot be done. The graphics card is soldered to the motherboard.

• The main screen becomes secondary in a Setup dual monitor (DVI-HDMI)

  Original title: WINDOWS PROGRAMMERS: problem with OS Windows7 not being not able change the numbers of identifiers when using multiple screens and HDMI

  To be clear... This problem is with the Win7 OS - no video card GUI that allow to change number ID display on multiple monitors.

  Problem with several screens and the use of HDMI cables substituent and #1 assuming that for its corresponding display view identifier.

  Not always ID desired.

  But there is no way to change this.

  EXAMPLE:

  Monitor is configured as primary display (ID #1) using a DVI cable

  Then I connect my SONY Bravia or my LG HDTV displays using HDMI cables, the new screen automatically takes over as the display identifier #1 and the monitor becomes identifier #2.

  -This introduces to the identifiers is not something I want, need or want to deal with every time I use several displays. And it creates problems.

  There is NO way to correct or modify the identifiers.

  Please provide a FIX as soon as possible if you have an ounce of concern for the customer service.

  The solution can be as simple as:

  GO to THE control panel - appearance and customization - display - change display settings:

  Right CLICK... on one of the displays in the window to the left of "Detect" / "identify."

  Then the OPTION 'Change display login' with a list of relevant identifier numbers according to the number of multiple connected screens.

  Click 'apply '.

  CLICK ON 'OK '.

  and Voila! View identifiers are defined.

  WINDOWS:

  We, your customers, look forward to the difficulty of Windows update that contains this fix a lot expected and necessary.

  Thanks in advance for your collaboration and concerns about our satisfaction and ease of use than the loyal customers of your software.

  Feel free to send me the BETA version of the patch when his complete: * e-mail address is removed from the privacy *.

  Hi Jean-Pierre.

  Thank you for all the information related to the issue.

  This problem may occur if the display of the configuration settings dual monitor retain the configuration. Possible reasons could be installed on the computer outdated display driver.

  1. What is the brand and model of the computer or the graphics card?
  2. Are you using double display card? Sometimes changing the display settings for the display cards might solve the problem.

  First of all, if you have a display of the map or media panel installed on the computer, go to the control panel and change the setting under multiple display change. Assign the identity number according to the status monitor, then check if it retains the configuration when you restart the computer.

  Additionally, make sure that you have installed the latest version of the display driver for Windows 7 from the website of the manufacturer of the computer. Sometimes, if the driver is not being updated, the setting may not keep the entire installation. See the link to know how to update the driver on Windows 7:

  http://Windows.Microsoft.com/en-us/Windows/Update-driver-hardware-ISN

  Please keep us informed.

• HP EliteBook 857w: docking station HP 90 w, supporting two monitors

  I am currently working with an EliteBook 8570w on a 90w docking station.  I have an external monitor and the laptop lid open for a second, more small monitor.  I would plug a second external monitor and continue to use the laptop when the lid is open for e-mail.  I can't find a definitive answer on whether Yes or no this is possible and what is the best configuration to achieve the desired final result.  Right now, the external monitor is connected to the VGA port.  The second monitor has both DVI and VGA ports so I could continue the path with the cord or an adapter that would work best.  It is best to connect the second DVI or DisplayPort monitor on the docking station?  What installer, if necessary, would allow me to keep the 2 external screens and the open laptop monitor?

  Thank you in advance.

  Hello

  Thanks for joining the Forums today!

  While using your monitor 8570w, when it is connected to a docking station (we tested this using an advanced docking station) there are two valid configurations for three independent displays. You can connect two additional monitors through DVI or only a monitor via DVI and the other through display port. It's using the advanced docking station.

  If one of your VGA monitors should still work the same as above.

  Here is a link to an image of an adapter, you can use to connect via display port: http://img.misco.eu/resources/images/products//100/HWP/FH/FH973AT/FH973AT_6_1600x1600.jpg

  Let us know if you need more assistance.

  Thank you

• Remove multiple monitors. __Laptop with Docking stations shows 6 monitors in Device Manager

  HP Tablet

  HP Docking Station with HP monitor.

  Windows 7 Ultimate

  The Manager of peripherals and devices and printers display 3 laptop screens and 3 monitors of the docking station.

  I deleted the additional monitors in the Deviices and printers and their drivers listed in Device Manager.

  But on reboot Windows 7 shows 6 monitors again!

  If these 'extra' monitor entries don't cause problems, leave them alone.  It's pilots that will always place them when you remove them.

• The dual monitor settings not remembered

  I just added a second monitor (same size and resolution as the first monitor). After using "personalize > display settings", activating the second monitor in the mode double screen, monitor the position and resolution, then selecting "apply > Save Settings > OK" the new monitor will work fine. However, when I restart the PC, Windows knows more on the second monitor and I have to redo all the settings more. It's ALWAYS happening (and not sporadically). I've never had this happen before in configurations dual monitor. I don't do something correctly?

  I'm under Windows Vista Ultimate 64-bit, 2-24 "1920 x 1280 Digital monitors, graphic adapter advanced ATI HD 4850 with dual output DVI, 8 GB of memory.

  Thanks in advance for any help!

  Jon

  Jon,
  Download ATI Catalyst Control Center, which includes the updated drivers for your card, of the following:
  http://game.AMD.com/us-en/drivers_catalyst.aspx?p=Vista64/common-Vista64

  After installing the software and restarted, you can access their software by clicking on start-> all programs-> Catalyst Control Center, click on CCC
  Then adjust your settings of dual monitor since the display under chart type Manager, here you can set the desktop, the refresh rate resolution and you want 1 of a possible 5 modes (press F1 to get help with their applicaton) display. Make sure that save you after having selected the desired configuration. Rami
  Microsoft Answers Support Engineer
  Visit our Microsoft answers feedback Forum and let us know what you think.

• Double desktop screen "stacked" on first office on a single monitor after using two monitors Netflix to the TV

  Double "stacked" on first desktop on one monitor - desktop screen came just after using two monitors (Netflix on TV extended

  My computer kept crashing after I had hung a dual monitor.  The second monitor was my television, playing a Netflix movie while I also used my computer to work on.  After splitting the two, I kept crashing for a few days.  I tried to delete the second monitor in the display settings, but does not know how to do this, if it's possible, but I think it's the problem and the cause of the double view of the desktop on my computer now.

  Does anyone know how to confirm what the problem is for some, and/or instructions how to solve this problem if you already know what can cause this problem.  No assistance at all would be greatly appreciated.  I tried to understand this two days...

  Note, in the heat of the Las Vegas area, I thought this may be due to overheating, but I actually he cooled in the refrigerator for a short time and restarted, but still have the problem.  Thank you.

  You have a Nvidia 8600 M GS graphics chip located on the motherboard, the drivers for it are provided by your manufacturer, HP, PC-specific to your model and NOT of the site MSUpdate or Nvidia.

  http://www.nvidia.com/object/notebook-Win7-WinVista-258.96-WHQL-driver.html see the following"However, please note that your notebook original equipment manufacturer (OEM) provides certified for your mobile drivers specific to their Web site. NVIDIA recommend you check with your OEM laptop on the software updates recommended for your laptop. The OEM cannot stipulate support technical issues raised by the use of this driver. »

  Since you apperently have a laptop / Notebook, you get all pilots that manufacturers of PC and NOT of MSUpdate site system. Driver version numbers shown on the MSUpdate site cannot be relied on as correct

• I have a Setup dual monitor.  When I paste develop settings from one image to the other, Lightroom going on the active window.

  Strange problem.  5.5 Lightroom.  Windows 8.1. Setting up dual monitor.

  I am processing a lot important photos.  I have #1 monitor set as my main to develop the window with #2 monitor configured only to display a larger version of the image, I work with. If I copy the parameters of development out of a picture and try to paste them on another image, Lightroom will increase from the #1 to the monitor #2 monitor in the main window to develop and does not display anything on the monitor #1.

  If I then try to paste develop settings on another image on the monitor #2, LR then displays a larger version of the image, I have been working with the #1 monitor.

  To work like I want to, I have to constantly drag my develop the window back to the #1 monitor whenever I try to paste the settings on a new image of development. How can I make this stop?

  I have similar (but different) problems dual monitor. Just posted this on my thread unanswered. It may be useful:

  Blessed excrement! After frustrating months of bi-ecrans LR questions and a month of waiting for an answer on this forum, I called Adobe technical support. Only five minutes before dialing, I had updated my PhotoShop CC application. When the useful Adobe tech classmate is online, I can't reproduce all the issues that had been plaguing me. It is a stretch... a biiiiig stretch... but he is feels/figure/seems that PhotoShop CC update has fixed my bi-ecrans LR problems! I'll keep track of what other programs I use and open while LR - ing to see if they are relaxing, but for now, everything is quite in front of two monitors.

• Do I need a dedicated video card to run a Setup dual monitor with HP 700-327c?

  Recently replaced an old HP Desktop with the envy of 700 running Windows 7 Professional.

  Old facility had a Setup to dual monitor with a video card that had two monitors - one HDMI and a DVI connectors.  The standard connectors on the old PC were VGA and DVI, but both have been capped to prevent use.

  I wanted to set up monitors on this new PC to do the same thing and wanted to know if a video card with the two input connectors dedicated was the best set-up or simply use a mute adapter for VGA or DVI on the new PC ports.  The new PC has two video connectors standard - one VGA and one DVI currently.

  FYI: Using an Intel i7-4770 with 16 GB of RAM and a video card using an Intel HD Graphics 4600.

  An update as promised - not a problem - used another cord with the right connector and setting up monitors using Windows device settings and they work perfectly.  No need for a separate or higher video card as I am not in the game application for video features.  Thanks BH.

• Problems with dual monitor: VGA is out only work

  I have a dual monitor card galaxy geforce gf430 who worked on Sunday night before putting the computer to sleep. When I came back Wednesday on the side of the hdmi/vga/dvi vga worked the only possible output. After having checked all the settings and the cables and update of my computer, I had more than one screen. I went out and bought an asus hd 6450 and installed in the hope that I would have my screen. no luck I checked all the settings again and nothing. I ran the program provided with the card and so far nothing. It is not even read a different location for the screen. can someone please?
  Operating system
  MS Windows Vista Home Premium 32 bit SP2
  CENTRAL PROCESSING UNIT
  AMD Phenom X 3 8400 42 ° C
  Tolimán 65nm technology
  RAM
  1.50 GB Dual-Channel DDR2 @ 267 MHz (4-4-4-12)
  Motherboard
  ASUSTek Computer Inc. NARRA3 (Socket AM2) 44 ° c.
  Graphics
  Monitor Non Plug-and-Play generic (1024x768@60Hz)
  ASUS EAH6450 series (ASUStek Computer Inc.) 50 ° C
  Hard drives
  625 GB Western Digital WDC WD64 00AAKS-65A7B SCSI Disk Device (fiber)
  Optical drives
  ATAPI DVD A DH16A3L SCSI CdRom Device
  Audio
  Realtek High Definition Audio

  I took the liberty to do a little research on the ASUS HD 6450 map.  Are - what you got to get the ASUS HD6450 silent and low GPU or the bigger one with the fan?  It might be possible that those silent will not support Eyefinity technology since it was modeled for the home theater PC use.

  I noticed that the model with the fan on the radiator mentions he is compatible Eyefinity, while the silent model does not work, but it allows you to choose between a VGA, DVI or HDMI port, but do not use them simultaneously.

• Dual monitor crashing my computer

  Hello

  I am currently under a dual screen setup with my monitor and a separate screen. It seems to work fine for a while and then all of a sudden my computer will start to act up, and then it will go to the blue screen of death. A small window pop up at the bottom left says there is a problem with my video card driver, but I have updated their and still get the same problem.

  Info:

  Laptop - Toshiba Satellite M300 - 4 GB RAM - Vista Home Premium

  Screen - Samsung SyncMaster 245BW

  Graphics - ATI Mobility Radeon HD 3470 graphics card

  Also, I checked the information page on the ATI website for this video card, and they even state it supports dual monitor.

  
  

  Thanks in advance, Scott

  EDIT - if I remove the VGA cable connect my laptop on the screen while my computer crashes, it will return to normal after a second or two. However, if I try to plug it back in then it will take to crash my computer.

  Hello

  Could be hardware related if they update the video drivers would be way to start
  This troubleshooting. Don't forget to check the minidumps and the event viewer for more information
  and you can paste the relevant information in a message here by using the two utilities listed below. His
  possible controls of catalyst can be in the game, check with Support ATI and their forums
  for problems known.

  ATI - drivers
  http://support.AMD.com/us/gpudownload/pages/index.aspx

  ATI - Support
  http://support.AMD.com/us/pages/AMDSupportHub.aspx

  ATI Catalyst drivers
  http://game.AMD.com/us-en/drivers_catalyst.aspx

  ATI/AMD forums
  http://forums.AMD.com/game/

  =======================================

  You may also check with the support from Toshiba and forums for known issues.

  Toshiba - Forums
  http://laptopforums.Toshiba.com/

  Toshiba - Contacts
  http://www.CSD.Toshiba.com/cgi-bin/TAIS/support/JSP/navShell.jsp?CF=su_contact

  Toshiba - drivers - access your model
  http://www.CSD.Toshiba.com/cgi-bin/TAIS/support/JSP/home.jsp?NAV=download

  Toshiba - Support
  http://www.CSD.Toshiba.com/cgi-bin/TAIS/support/JSP/home.jsp

  ===================================================
  ===================================================

  To solve the problems:

  Look in the Event Viewer to see if something is reported on those.
  http://www.computerperformance.co.UK/Vista/vista_event_viewer.htm

  MyEventViewer - free - a simple alternative in the standard Windows Event Viewer.
  TIP - Options - Advanced filter allows you to see a period of time instead of the entire file.
  http://www.NirSoft.NET/utils/my_event_viewer.html

  -------------------------------------------------------------------------
  Also this, so you can see the probable bluescreens.

  Windows Vista restarts automatically if your computer encounters an error that requires him to plant.
  http://www.winvistatips.com/disable-automatic-restart-T84.html

  -------------------------------------------------------------------------

  Here are a few ways to possibly fix the blue screen issue. If you could give the info to blue screen
  This would help. Such as ITC and 4 others entered at the bottom left. And another error
  information such as the STOP codes and info like IRQL_NOT_LESS_OR_EQUAL or PAGE_FAULT_IN_NONPAGED_AREA and similar messages.

  As examples:

  BCCode: 116
  BCP1: 87BC9510
  BCP2: 8C013D80
  BCP3: 00000000
  BCP4: 00000002

  or in this format:

  Stop: 0 x 00000000 (oxoooooooo oxoooooooo oxoooooooo oxooooooooo)
  Tcpip.sys - address blocking 0 x 0 00000000 000000000 DateStamp 0 x 000000000

  It is an excellent tool for displaying the blue screen error information

  BlueScreenView scans all your minidump files created during 'blue screen of death '.
  hangs and displays information about all accidents of a table - free
  http://www.NirSoft.NET/utils/blue_screen_view.html

  BlueScreens many are caused by old or damaged, drivers particularly video drivers but it
  are other causes.

  You can do without if needed fail or the Vista DVD or recovery command prompt mode
  Options if your system was installed by the manufacturer.

  This tells you how to access the System Recovery Options and/or a Vista DVD
  http://windowshelp.Microsoft.com/Windows/en-us/help/326b756b-1601-435e-99D0-1585439470351033.mspx

  You can try a system restore to a point before the problem started when one exists.

  How to make a Vista system restore
  http://www.Vistax64.com/tutorials/76905-System-Restore-how.html

  -------------------------------------------------------------------------

  Start - type this in the search box-> find COMMAND at the top and RIGHT CLICK – RUN AS ADMIN

  Enter this at the command prompt - sfc/scannow

  How to analyze the log file entries that the Microsoft Windows Resource Checker (SFC.exe)
  program generates in Windows Vista cbs.log
  http://support.Microsoft.com/kb/928228

  The log can give you the answer if there is a corrupted driver. (Says not all possible
  driver problems).

  Also run CheckDisk, so we cannot exclude as much as possible of the corruption.

  How to run the check disk at startup in Vista
  http://www.Vistax64.com/tutorials/67612-check-disk-Chkdsk.html

  -------------------------------------------------------------------------

  Often drivers up-to-date will help, usually video, sound, network card (NIC), WiFi, part 3
  keyboard and mouse, as well as of other major device drivers.

  Look at the sites of the manufacturer for drivers - and the manufacturer of the device manually.
  http://pcsupport.about.com/od/driverssupport/HT/driverdlmfgr.htm

  How to install a device driver in Vista Device Manager
  http://www.Vistax64.com/tutorials/193584-Device-Manager-install-driver.html

  How to disable automatic driver Installation in Windows Vista - drivers
  http://www.AddictiveTips.com/Windows-Tips/how-to-disable-automatic-driver-installation-in-Windows-Vista/
  http://TechNet.Microsoft.com/en-us/library/cc730606 (WS.10) .aspx

  -------------------------------------------------------------------------

  How to fix BlueScreen (STOP) errors that cause Windows Vista to shut down or restart
  quit unexpectedly
  http://support.Microsoft.com/kb/958233

  Troubleshooting, STOP error blue screen Vista
  http://www.chicagotech.NET/Vista/vistabluescreen.htm

  Understanding and decoding BSOD (blue screen of death) Messages
  http://www.Taranfx.com/blog/?p=692

  Windows - troubleshooting blue screen errors
  http://KB.wisc.edu/page.php?id=7033

  -------------------------------------------------------------------------

  In some cases, it may be necessary.

  The Options or Vista recovery disk Startup Repair

  How to do a startup repair
  http://www.Vistax64.com/tutorials/91467-startup-repair.html

  This tells you how to access the System Recovery Options and/or a Vista DVD
  http://windowshelp.Microsoft.com/Windows/en-us/help/326b756b-1601-435e-99D0-1585439470351033.mspx

  I hope this helps.
  Rob - bicycle - Mark Twain said it is good.

• Laptop with docking home & two monitors... need to get laptop to work after the withdrawal of the docking station

  It drives me crazy.  I have a work Dell laptop connected to a station host and two double monitors. It works very well at the office that I work mainly on two large dual screens.  When I remove the laptop from the docking station and bring home the computer starts and displays a portion of my homescreen (like an extended display).  But I can't do anything else with it. I can't access my files or anything.

  What I want to do now that I'm home with my laptop is to redo the settings so that the laptop is my main screen.  The normal methods of right click and change the screen resolution do not work because I can't access my Windows start tab.  Any ideas...

  Thank you.

  Hello

  Thanks for posting your query on the Microsoft Community.

  I would be grateful if you can provide us with the following information to determine the root cause of the problem.

  1. What is the number and model of your computer and the graphics card?

  2. Have you tried to monitor primary as secondary and vice versa?

  3. All device drivers are updated?

  Windows can detect automatically that an additional screen. If you connect two or more monitors, you must manually designate the primary display, arrange your desktop, and apply display settings, such as color depth and screen resolution. So, the next time that you connect these monitors, Windows automatically identifies the primary display and applies the settings that you previously specified for each additional display.

  Try the methods mentioned below and see if it helps.

  Method 1

  If you haven't tried Exchange monitors so I suggest you to try and see if the problem still occurs.

  To change the settings of two monitors you can consult the links below:

  Guided Help: Setup dual monitor is easy in Windows 7!

  http://support.Microsoft.com/kb/976064/en-us

  Change settings display on multiple monitors

  http://Windows.Microsoft.com/en-us/Windows-Vista/change-display-settings-on-multiple-monitors

  Note: This link is also applicable for Windows 7 .

  Method 2

  If the problem persists I suggest you to update the display drivers. As the display drivers for two monitors are not the same, so try to update and check the status.

  Updated a hardware driver that is not working properly
  http://Windows.Microsoft.com/en-us/Windows7/update-a-driver-for-hardware-that-isn ' t-work correctly

  Update drivers: recommended links

  http://Windows.Microsoft.com/en-us/Windows7/update-drivers-recommended-links

  See also:

  Work and play better with multiple monitors

  http://Windows.Microsoft.com/en-us/Windows7/work-and-play-better-with-multiple-monitors

  Setting up dual monitor: two screens are better than one

  http://www.Microsoft.com/athome/organization/twomonitors.aspx

  Hope it would help. If problem persists always post back with the current state of your computer and the result of the proposed suggestion, we will be happy to help you.

  Kind regards

• Dual monitor Dell and your Sharp TV screen

  I have a Dell 3008WFP monitor and a TV Sharp LC52LE810UN of. The monitor is connected using DVI and the TV is connected using HDMI. In 'screen resolution' the recommended setting for the Dell monitor is 2560 x 1600. It is a 2 monitor. I can't double bill for work. correctly. The resolution gets blurred. The only way I can make it work is to expand the display. It has already used to work when it is used my Samsung P2770 monitor.

  I am running Windows 7 and my graphics card is NVIDIA GEForce 310.

  Can someone please.

  Hi ManajitSengupta,

  You want to hope that it is not a compatibility problem, because that could leave you a GROUND for a solution. Assuming that everyone even working on a solution. I had a few problems after the upgrade of Vista that never existed when running the Windows 7 RC on the same computer. The cause of a problem is not necessarily in a straight line between Win7 and the problem device. The only things I can think of now are the driver/software standard, tedious, technical troubleshooting. Starting by ' screens exhibit the same behavior when a simple SVGA driver is all that is installed? »

  Some device of even difficult problems have been resolved by reinstalling

  http://answers.Microsoft.com/en-us/Windows/Forum/Windows_7-hardware/cant-use-dual-monitor-with-Windows-7-64-bit-and/58f2706d-ed89-46ab-80f1-ad677b4c1e13

  http://answers.Microsoft.com/en-us/Windows/Forum/Windows_7-desktop/Windows-7-docking-station-dual-monitor-display/2abeebc6-8015-4FB1-B948-dba5e27c9bfb

  http://answers.Microsoft.com/en-us/Windows/Forum/Windows_7-desktop/dual-monitor-Setup-cannot-move-Windows-from-one/e14a0b3b-8e95-4FA5-9f68-036dde61f0b6

  http://answers.Microsoft.com/en-us/Windows/Forum/Windows_7-networking/multi-monitor-support-in-Windows-7-Remote-Desktop/c629d317-88c2-48BA-973a-da04a8c9d579

  http://Windows.Microsoft.com/en-in/Windows-Vista/set-up-multiple-monitors